ARM: imx6q: add the missing cko output selection

The clock output on imx6q CCM_CLKO1 pad is not always cko1 clock, and
there is a multiplexer to select between cko1 and cko2.  Add this
missing selection as the clock cko.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Shawn Guo 2013-07-18 13:35:40 +08:00
Родитель 6526bb3cc5
Коммит 6cd622357d
2 изменённых файлов: 4 добавлений и 1 удалений

Просмотреть файл

@ -213,6 +213,7 @@ clocks and IDs.
cko2_sel 198
cko2_podf 199
cko2 200
cko 201
Examples:

Просмотреть файл

@ -216,6 +216,7 @@ static const char *cko2_sels[] = {
"ldb_di0", "ldb_di1", "esai", "eim_slow",
"uart_serial", "spdif", "asrc", "hsi_tx",
};
static const char *cko_sels[] = { "cko1", "cko2", };
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@ -250,7 +251,7 @@ enum mx6q_clks {
ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
spdif, cko2_sel, cko2_podf, cko2, clk_max
spdif, cko2_sel, cko2_podf, cko2, cko, clk_max
};
static struct clk *clk[clk_max];
@ -409,6 +410,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
clk[cko2_sel] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels));
clk[cko] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels));
/* name reg shift width busy: reg, shift parent_names num_parents */
clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));