PCI: pciehp: Enable Command Completed Interrupt only if supported

The No Command Completed Support bit in the Slot Capabilities register
indicates whether Command Completed Interrupt Enable is unsupported.

We already check whether No Command Completed Support bit is set in
pcie_wait_cmd(), and do not wait in this case.

Don't enable this Command Completed Interrupt at all if NCCS is set, so
that when users dump configuration space from userspace, the dump does not
confuse them by saying that Command Completed Interrupt is not supported,
but it is enabled.

Link: https://lore.kernel.org/r/20220927141926.8895-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>

drivers/pci/hotplug/pciehp_hpc.c

@@ -811,7 +811,9 @@ static void pcie_enable_notification(struct controller *ctrl)
 	else
 		cmd |= PCI_EXP_SLTCTL_PDCE;
 	if (!pciehp_poll_mode)
-		cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
+		cmd |= PCI_EXP_SLTCTL_HPIE;
+	if (!pciehp_poll_mode && !NO_CMD_CMPL(ctrl))
+		cmd |= PCI_EXP_SLTCTL_CCIE;
 
 	mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
 		PCI_EXP_SLTCTL_PFDE |