From 6d676d8af852e483044837240ad9ca669a01aaf2 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 25 Nov 2008 06:04:02 -0300 Subject: [PATCH] V4L/DVB (9745): em28xx: Cleanup GPIO/GPO setup code Cleanup the calls to set the GPIOs and GPOs for various devices, replacing the register number with the #define from em28xx-reg.h and converting over to using em28xx_write_reg() Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 36 +++++++++++------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index f3f84692856f..83f352a41041 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1487,7 +1487,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ); /* FIXME guess */ /* Turn on analog audio output */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; case EM2861_BOARD_KWORLD_PVRTV_300U: @@ -1499,9 +1499,9 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ); msleep(10); - em28xx_write_regs(dev, 0x08, "\x6d", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d); msleep(10); - em28xx_write_regs(dev, 0x08, "\x7d", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d); msleep(10); break; @@ -1527,17 +1527,17 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ); /* TODO: someone can do some cleanup here... not everything's needed */ - em28xx_write_regs(dev, 0x04, "\x00", 1); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); msleep(10); - em28xx_write_regs(dev, 0x04, "\x01", 1); + em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); msleep(10); - em28xx_write_regs(dev, 0x08, "\xfd", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xfc", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xdc", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xfc", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc); mdelay(70); break; @@ -1550,11 +1550,11 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_FREQ_100_KHZ); /* this device needs some gpio writes to get the DVB-T demod work */ - em28xx_write_regs(dev, 0x08, "\xfe", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xde", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); mdelay(70); - dev->em28xx_write_regs(dev, 0x08, "\xfe", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); mdelay(70); break; @@ -1565,11 +1565,11 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* this device needs some gpio writes to get the DVB-T demod work */ - em28xx_write_regs(dev, 0x08, "\xfe", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xde", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde); mdelay(70); - em28xx_write_regs(dev, 0x08, "\xfe", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe); mdelay(70); /* switch em2880 rc protocol */ /* djh - I have serious doubts this is right... */ @@ -1587,7 +1587,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ); /* Turn on analog audio output */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; case EM2860_BOARD_GADMEI_UTV330: @@ -1608,7 +1608,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ); /* enables audio for that device */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xfd", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); break; case EM2874_BOARD_PINNACLE_PCTV_80E: @@ -1861,7 +1861,7 @@ void em28xx_card_setup(struct em28xx *dev) } case EM2820_BOARD_KWORLD_PVRTV2800RF: /* GPIO enables sound on KWORLD PVR TV 2800RF */ - em28xx_write_regs_req(dev, 0x00, 0x08, "\xf9", 1); + em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9); break; case EM2820_BOARD_UNKNOWN: case EM2800_BOARD_UNKNOWN: