From 6dee3fb94004c43ce09f6bf5e7c0b778ec5b8cc8 Mon Sep 17 00:00:00 2001 From: Linas Vepstas Date: Thu, 3 Nov 2005 18:50:10 -0600 Subject: [PATCH] [PATCH] ppc64: PCI reset support routines 13-eeh-recovery-support-routines.patch EEH Recovery support routines This patch adds routines required to help drive the recovery of EEH-frozen slots. The main function is to drive the PCI #RST signal line high for a qurter of a second, and then allow for a second & a half of settle time. Signed-off-by: Linas Vepstas Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 99 ++++++++++++++++++++++++++++ include/asm-powerpc/ppc-pci.h | 14 ++++ 2 files changed, 113 insertions(+) diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 1fec99d53311..a06c91a4852b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -17,6 +17,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include #include #include @@ -676,6 +677,104 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); +/* ------------------------------------------------------------- */ +/* The code below deals with error recovery */ + +/** Return negative value if a permanent error, else return + * a number of milliseconds to wait until the PCI slot is + * ready to be used. + */ +static int +eeh_slot_availability(struct pci_dn *pdn) +{ + int rc; + int rets[3]; + + rc = read_slot_reset_state(pdn, rets); + + if (rc) return rc; + + if (rets[1] == 0) return -1; /* EEH is not supported */ + if (rets[0] == 0) return 0; /* Oll Korrect */ + if (rets[0] == 5) { + if (rets[2] == 0) return -1; /* permanently unavailable */ + return rets[2]; /* number of millisecs to wait */ + } + return -1; +} + +/** rtas_pci_slot_reset raises/lowers the pci #RST line + * state: 1/0 to raise/lower the #RST + * + * Clear the EEH-frozen condition on a slot. This routine + * asserts the PCI #RST line if the 'state' argument is '1', + * and drops the #RST line if 'state is '0'. This routine is + * safe to call in an interrupt context. + * + */ + +static void +rtas_pci_slot_reset(struct pci_dn *pdn, int state) +{ + int rc; + + BUG_ON (pdn==NULL); + + if (!pdn->phb) { + printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", + pdn->node->full_name); + return; + } + + rc = rtas_call(ibm_set_slot_reset,4,1, NULL, + pdn->eeh_config_addr, + BUID_HI(pdn->phb->buid), + BUID_LO(pdn->phb->buid), + state); + if (rc) { + printk (KERN_WARNING "EEH: Unable to reset the failed slot, (%d) #RST=%d dn=%s\n", + rc, state, pdn->node->full_name); + return; + } + + if (state == 0) + eeh_clear_slot (pdn->node->parent->child); +} + +/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second + * dn -- device node to be reset. + */ + +void +rtas_set_slot_reset(struct pci_dn *pdn) +{ + int i, rc; + + rtas_pci_slot_reset (pdn, 1); + + /* The PCI bus requires that the reset be held high for at least + * a 100 milliseconds. We wait a bit longer 'just in case'. */ + +#define PCI_BUS_RST_HOLD_TIME_MSEC 250 + msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + rtas_pci_slot_reset (pdn, 0); + + /* After a PCI slot has been reset, the PCI Express spec requires + * a 1.5 second idle time for the bus to stabilize, before starting + * up traffic. */ +#define PCI_BUS_SETTLE_TIME_MSEC 1800 + msleep (PCI_BUS_SETTLE_TIME_MSEC); + + /* Now double check with the firmware to make sure the device is + * ready to be used; if not, wait for recovery. */ + for (i=0; i<10; i++) { + rc = eeh_slot_availability (pdn); + if (rc <= 0) break; + + msleep (rc+100); + } +} + /* ------------------------------------------------------------- */ /* The code below deals with enabling EEH for devices during the * early boot sequence. EEH must be enabled before any PCI probing diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h index c47146f74a7b..930a606b4e35 100644 --- a/include/asm-powerpc/ppc-pci.h +++ b/include/asm-powerpc/ppc-pci.h @@ -52,4 +52,18 @@ extern unsigned long pci_probe_only; extern unsigned long pci_assign_all_buses; extern int pci_read_irq_line(struct pci_dev *pci_dev); +/* ---- EEH internal-use-only related routines ---- */ +#ifdef CONFIG_EEH +/** + * rtas_set_slot_reset -- unfreeze a frozen slot + * + * Clear the EEH-frozen condition on a slot. This routine + * does this by asserting the PCI #RST line for 1/8th of + * a second; this routine will sleep while the adapter is + * being reset. + */ +void rtas_set_slot_reset (struct pci_dn *); + +#endif + #endif /* _ASM_POWERPC_PPC_PCI_H */