dt-binding: ti: am65x: document common platform time sync cpts module

Document device tree bindings for TI AM654/J721E SoC The Common Platform
Time Sync (CPTS) module. The CPTS module is used to facilitate host control
of time sync operations. Main features of CPTS module are:
  - selection of multiple external clock sources
  - 64-bit timestamp mode in ns with ppm and nudge adjustment.
  - control of time sync events via interrupt or polling
  - hardware timestamp of ext. events (HWx_TS_PUSH)
  - periodic generator function outputs (TS_GENFx)
  - PPS in combination with timesync router
  - Depending on integration it enables compliance with the IEEE 1588-2008
standard for a precision clock synchronization protocol, Ethernet Enhanced
Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
Measurement (PTM).

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Grygorii Strashko 2020-05-01 23:50:05 +03:00 коммит произвёл David S. Miller
Родитель 1248dc00fb
Коммит 6e87ac748e
2 изменённых файлов: 159 добавлений и 0 удалений

Просмотреть файл

@ -144,6 +144,13 @@ patternProperties:
description:
CPSW MDIO bus.
"^cpts$":
type: object
allOf:
- $ref: "ti,am654-cpts.yaml#"
description:
CPSW Common Platform Time Sync (CPTS) module.
required:
- compatible
- reg

Просмотреть файл

@ -0,0 +1,152 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/ti,am654-cpts.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
maintainers:
- Grygorii Strashko <grygorii.strashko@ti.com>
- Sekhar Nori <nsekhar@ti.com>
description: |+
The TI AM654x/J721E CPTS module is used to facilitate host control of time
sync operations.
Main features of CPTS module are
- selection of multiple external clock sources
- Software control of time sync events via interrupt or polling
- 64-bit timestamp mode in ns with PPM and nudge adjustment.
- hardware timestamp push inputs (HWx_TS_PUSH)
- timestamp counter compare output (TS_COMP)
- timestamp counter bit output (TS_SYNC)
- periodic Generator function outputs (TS_GENFx)
- Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
- external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
Depending on integration it enables compliance with the IEEE 1588-2008
standard for a precision clock synchronization protocol, Ethernet Enhanced
Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
Measurement (PTM).
TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
different parts of the system which could be synchronized with each other
- Main CPTS
- MCU CPSW CPTS with IEEE 1588-2008 support
- PCIe subsystem CPTS for PTM support
Depending on CPTS module integration and when CPTS is integral part of
another module (MCU CPSW for example) "compatible" and "reg" can
be omitted - parent module is fully responsible for CPTS enabling and
configuration.
properties:
$nodename:
pattern: "^cpts(@.*|-[0-9a-f])*$"
compatible:
oneOf:
- const: ti,am65-cpts
- const: ti,j721e-cpts
reg:
maxItems: 1
description:
The physical base address and size of CPTS IO range
reg-names:
items:
- const: cpts
clocks:
description: CPTS reference clock
clock-names:
items:
- const: cpts
interrupts-extended:
items:
- description: CPTS events interrupt
interrupt-names:
items:
- const: "cpts"
ti,cpts-ext-ts-inputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of hardware timestamp push inputs (HWx_TS_PUSH)
ti,cpts-periodic-outputs:
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
maximum: 8
description:
Number of timestamp Generator function outputs (TS_GENFx)
refclk-mux:
type: object
description: CPTS reference clock multiplexer clock
properties:
'#clock-cells':
const: 0
clocks:
maxItems: 8
assigned-clocks:
maxItems: 1
assigned-clocks-parents:
maxItems: 1
required:
- clocks
required:
- clocks
- clock-names
- interrupts-extended
- interrupt-names
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
cpts@310d0000 {
compatible = "ti,am65-cpts";
reg = <0x0 0x310d0000 0x0 0x400>;
reg-names = "cpts";
clocks = <&main_cpts_mux>;
clock-names = "cpts";
interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-periodic-outputs = <6>;
ti,cpts-ext-ts-inputs = <8>;
main_cpts_mux: refclk-mux {
#clock-cells = <0>;
clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
<&k3_clks 157 91>, <&k3_clks 157 77>,
<&k3_clks 157 102>, <&k3_clks 157 80>,
<&k3_clks 120 3>, <&k3_clks 121 3>;
assigned-clocks = <&main_cpts_mux>;
assigned-clock-parents = <&k3_clks 118 11>;
};
};
- |
cpts {
clocks = <&k3_clks 18 2>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};