power: supply: rt9467: Add Richtek RT9467 charger driver

RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications.

It integrates a synchronous PWM controller, power MOSFETs,
input current sensing and regulation, high-accuracy voltage regulation,
and charge termination. The charge current is regulated through
integrated sensing resistors.

The RT9467 also features USB On-The-Go (OTG) support. It also integrates
D+/D- pin for USB host/charging port detection.

Co-developed-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This commit is contained in:
ChiaEn Wu 2023-01-03 15:29:57 +08:00 коммит произвёл Sebastian Reichel
Родитель e1b4620fb5
Коммит 6f7f70e3a8
3 изменённых файлов: 1302 добавлений и 0 удалений

Просмотреть файл

@ -793,6 +793,25 @@ config CHARGER_RT9455
help
Say Y to enable support for Richtek RT9455 battery charger.
config CHARGER_RT9467
tristate "Richtek RT9467 Battery Charger Driver"
depends on I2C && GPIOLIB && REGULATOR
select REGMAP_I2C
select REGMAP_IRQ
select LINEAR_RANGES
help
Say Y here to enable RT9467 Battery Charger.
RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications. It integrates a synchronous PWM controller,
power MOSFETs, input current sensing and regulation, high-accuracy
voltage regulation, and charge termination. The charge current is
regulated through integrated sensing resistors. It also features
USB On-The-Go (OTG) support and integrates D+/D- pin for USB
host/charging port detection.
This driver can also be built as a module. If so, the module
will be called "rt9467-charger".
config CHARGER_RT9471
tristate "Richtek RT9471 battery charger driver"
depends on I2C && GPIOLIB && REGULATOR

Просмотреть файл

@ -57,6 +57,7 @@ obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
obj-$(CONFIG_CHARGER_RT9467) += rt9467-charger.o
obj-$(CONFIG_CHARGER_RT9471) += rt9471.o
obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o

Разница между файлами не показана из-за своего большого размера Загрузить разницу