Merge branch 'next/dt-samsung-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2
From Kukjin Kim: * 'next/dt-samsung-new' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add nodes for dw_mmc controllers for Samsung EXYNOS5250 platforms ARM: EXYNOS: Add AUXDATA support for MSHC controllers ARM: EXYNOS: Add support for MSHC controller clocks ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen ARM: dts: use uart2 for console on smdkv310 and smdk5250 ARM: dts: Add basic dts file for Samsung Trats board ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4 ARM: dts: Assume status of all optional nodes as disabled for exynos4 ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
This commit is contained in:
Olof Johansson
Коммит
6fd9b70e1b
|
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* Samsung's Exynos4 SoC series common device tree source
|
||||
*
|
||||
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
* Copyright (c) 2010-2011 Linaro Ltd.
|
||||
* www.linaro.org
|
||||
*
|
||||
* Samsung's Exynos4 SoC series device nodes are listed in this file. Particular
|
||||
* SoCs from Exynos4 series can include this file and provide values for SoCs
|
||||
* specfic bindings.
|
||||
*
|
||||
* Note: This file does not include device nodes for all the controllers in
|
||||
* Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
|
||||
* nodes can be added to this file.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
spi0 = &spi_0;
|
||||
spi1 = &spi_1;
|
||||
spi2 = &spi_2;
|
||||
};
|
||||
|
||||
gic:interrupt-controller@10490000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
|
||||
};
|
||||
|
||||
combiner:interrupt-controller@10440000 {
|
||||
compatible = "samsung,exynos4210-combiner";
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
reg = <0x10440000 0x1000>;
|
||||
};
|
||||
|
||||
watchdog@10060000 {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <0 43 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@10070000 {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x10070000 0x100>;
|
||||
interrupts = <0 44 0>, <0 45 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
keypad@100A0000 {
|
||||
compatible = "samsung,s5pv210-keypad";
|
||||
reg = <0x100A0000 0x100>;
|
||||
interrupts = <0 109 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12510000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12510000 0x100>;
|
||||
interrupts = <0 73 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12520000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12520000 0x100>;
|
||||
interrupts = <0 74 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12530000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12530000 0x100>;
|
||||
interrupts = <0 75 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12540000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12540000 0x100>;
|
||||
interrupts = <0 76 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@13800000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13800000 0x100>;
|
||||
interrupts = <0 52 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@13810000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13810000 0x100>;
|
||||
interrupts = <0 53 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@13820000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@13830000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13830000 0x100>;
|
||||
interrupts = <0 55 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13860000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13860000 0x100>;
|
||||
interrupts = <0 58 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13870000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13870000 0x100>;
|
||||
interrupts = <0 59 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13880000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13880000 0x100>;
|
||||
interrupts = <0 60 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13890000 0x100>;
|
||||
interrupts = <0 61 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138A0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138A0000 0x100>;
|
||||
interrupts = <0 62 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138B0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138B0000 0x100>;
|
||||
interrupts = <0 63 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138C0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138C0000 0x100>;
|
||||
interrupts = <0 64 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138D0000 0x100>;
|
||||
interrupts = <0 65 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@13920000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13920000 0x100>;
|
||||
interrupts = <0 66 0>;
|
||||
tx-dma-channel = <&pdma0 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 6>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13930000 0x100>;
|
||||
interrupts = <0 67 0>;
|
||||
tx-dma-channel = <&pdma1 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma1 6>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_2: spi@13940000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13940000 0x100>;
|
||||
interrupts = <0 68 0>;
|
||||
tx-dma-channel = <&pdma0 9>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 8>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
amba {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "arm,amba-bus";
|
||||
interrupt-parent = <&gic>;
|
||||
ranges;
|
||||
|
||||
pdma0: pdma@12680000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12680000 0x1000>;
|
||||
interrupts = <0 35 0>;
|
||||
};
|
||||
|
||||
pdma1: pdma@12690000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12690000 0x1000>;
|
||||
interrupts = <0 36 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -40,6 +40,7 @@
|
|||
<&gpk2 4 2 3 3>,
|
||||
<&gpk2 5 2 3 3>,
|
||||
<&gpk2 6 2 3 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@12510000 {
|
||||
|
|
@ -53,6 +54,7 @@
|
|||
<&gpk0 4 2 3 3>,
|
||||
<&gpk0 5 2 3 3>,
|
||||
<&gpk0 6 2 3 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
|
|
@ -64,30 +66,35 @@
|
|||
label = "Up";
|
||||
gpios = <&gpx2 0 0 0x10000 2>;
|
||||
linux,code = <103>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
down {
|
||||
label = "Down";
|
||||
gpios = <&gpx2 1 0 0x10000 2>;
|
||||
linux,code = <108>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
back {
|
||||
label = "Back";
|
||||
gpios = <&gpx1 7 0 0x10000 2>;
|
||||
linux,code = <158>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
home {
|
||||
label = "Home";
|
||||
gpios = <&gpx1 6 0 0x10000 2>;
|
||||
linux,code = <102>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
|
||||
menu {
|
||||
label = "Menu";
|
||||
gpios = <&gpx1 5 0 0x10000 2>;
|
||||
linux,code = <139>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -98,60 +105,4 @@
|
|||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
keypad@100A0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12520000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12540000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13860000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13870000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13880000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138A0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138B0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138C0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@13920000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_2: spi@13940000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -26,7 +26,7 @@
|
|||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
|
||||
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
|
||||
};
|
||||
|
||||
sdhci@12530000 {
|
||||
|
|
@ -40,6 +40,7 @@
|
|||
<&gpk2 4 2 3 3>,
|
||||
<&gpk2 5 2 3 3>,
|
||||
<&gpk2 6 2 3 3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
keypad@100A0000 {
|
||||
|
|
@ -47,6 +48,7 @@
|
|||
samsung,keypad-num-columns = <8>;
|
||||
linux,keypad-no-autorepeat;
|
||||
linux,keypad-wakeup;
|
||||
status = "okay";
|
||||
|
||||
row-gpios = <&gpx2 0 3 3 0>,
|
||||
<&gpx2 1 3 3 0>;
|
||||
|
|
@ -128,6 +130,7 @@
|
|||
samsung,i2c-max-bus-freq = <20000>;
|
||||
gpios = <&gpd1 0 2 3 0>,
|
||||
<&gpd1 1 2 3 0>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "samsung,24ad0xd1";
|
||||
|
|
@ -140,58 +143,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
sdhci@12510000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12520000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci@12540000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13870000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13880000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138A0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138B0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138C0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@13920000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_2: spi@13940000 {
|
||||
gpios = <&gpc1 1 5 3 0>,
|
||||
<&gpc1 3 5 3 0>,
|
||||
<&gpc1 4 5 3 0>;
|
||||
status = "okay";
|
||||
|
||||
w25x80@0 {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,237 @@
|
|||
/*
|
||||
* Samsung's Exynos4210 based Trats board device tree source
|
||||
*
|
||||
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Device tree source file for Samsung's Trats board which is based on
|
||||
* Samsung's Exynos4210 SoC.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "exynos4210.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Samsung Trats based on Exynos4210";
|
||||
compatible = "samsung,trats", "samsung,exynos4210";
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x20000000
|
||||
0x60000000 0x20000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
|
||||
};
|
||||
|
||||
vemmc_reg: voltage-regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VMEM_VDD_2.8V";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpk0 2 1 0 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
sdhci_emmc: sdhci@12510000 {
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
broken-voltage;
|
||||
gpios = <&gpk0 0 2 0 3>,
|
||||
<&gpk0 1 2 0 3>,
|
||||
<&gpk0 3 2 2 3>,
|
||||
<&gpk0 4 2 2 3>,
|
||||
<&gpk0 5 2 2 3>,
|
||||
<&gpk0 6 2 2 3>,
|
||||
<&gpk1 3 3 3 3>,
|
||||
<&gpk1 4 3 3 3>,
|
||||
<&gpk1 5 3 3 3>,
|
||||
<&gpk1 6 3 3 3>;
|
||||
vmmc-supply = <&vemmc_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13800000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13810000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13820000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@13830000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c@138B0000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <100000>;
|
||||
gpios = <&gpb 6 3 3 0>,
|
||||
<&gpb 7 3 3 0>;
|
||||
status = "okay";
|
||||
|
||||
max8997_pmic@66 {
|
||||
compatible = "maxim,max8997-pmic";
|
||||
|
||||
reg = <0x66>;
|
||||
|
||||
max8997,pmic-buck1-uses-gpio-dvs;
|
||||
max8997,pmic-buck2-uses-gpio-dvs;
|
||||
max8997,pmic-buck5-uses-gpio-dvs;
|
||||
|
||||
max8997,pmic-ignore-gpiodvs-side-effect;
|
||||
max8997,pmic-buck125-default-dvs-idx = <0>;
|
||||
|
||||
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
|
||||
<&gpx0 6 1 0 0>,
|
||||
<&gpl0 0 1 0 0>;
|
||||
|
||||
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
|
||||
<1250000>, <1200000>,
|
||||
<1150000>, <1100000>,
|
||||
<1000000>, <950000>;
|
||||
|
||||
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
|
||||
<950000>, <900000>,
|
||||
<1100000>, <1000000>,
|
||||
<950000>, <900000>;
|
||||
|
||||
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>;
|
||||
|
||||
regulators {
|
||||
valive_reg: LDO2 {
|
||||
regulator-name = "VALIVE_1.1V_C210";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vusb_reg: LDO3 {
|
||||
regulator-name = "VUSB_1.1V_C210";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
vmipi_reg: LDO4 {
|
||||
regulator-name = "VMIPI_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vpda_reg: LDO6 {
|
||||
regulator-name = "VCC_1.8V_PDA";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcam_reg: LDO7 {
|
||||
regulator-name = "CAM_ISP_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vusbdac_reg: LDO8 {
|
||||
regulator-name = "VUSB/VDAC_3.3V_C210";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vccpda_reg: LDO9 {
|
||||
regulator-name = "VCC_2.8V_PDA";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vpll_reg: LDO10 {
|
||||
regulator-name = "VPLL_1.1V_C210";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcclcd_reg: LDO13 {
|
||||
regulator-name = "VCC_3.3V_LCD";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vlcd_reg: LDO15 {
|
||||
regulator-name = "VLCD_2.2V";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
};
|
||||
|
||||
camsensor_reg: LDO16 {
|
||||
regulator-name = "CAM_SENSOR_IO_1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddq_reg: LDO21 {
|
||||
regulator-name = "VDDQ_M1M2_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
varm_breg: BUCK1 {
|
||||
regulator-name = "VARM_1.2V_C210";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vint_breg: BUCK2 {
|
||||
regulator-name = "VINT_1.1V_C210";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
camisp_breg: BUCK4 {
|
||||
regulator-name = "CAM_ISP_CORE_1.2V";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
vmem_breg: BUCK5 {
|
||||
regulator-name = "VMEM_1.2V_C210";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vccsub_breg: BUCK7 {
|
||||
regulator-name = "VCC_SUB_2.0V";
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
safe1_sreg: ESAFEOUT1 {
|
||||
regulator-name = "SAFEOUT1";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
safe2_sreg: ESAFEOUT2 {
|
||||
regulator-name = "SAFEOUT2";
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -19,35 +19,23 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
/include/ "exynos4.dtsi"
|
||||
/include/ "exynos4210-pinctrl.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "samsung,exynos4210";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
spi0 = &spi_0;
|
||||
spi1 = &spi_1;
|
||||
spi2 = &spi_2;
|
||||
pinctrl0 = &pinctrl_0;
|
||||
pinctrl1 = &pinctrl_1;
|
||||
pinctrl2 = &pinctrl_2;
|
||||
};
|
||||
|
||||
gic:interrupt-controller@10490000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
cpu-offset = <0x8000>;
|
||||
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
|
||||
};
|
||||
|
||||
combiner:interrupt-controller@10440000 {
|
||||
compatible = "samsung,exynos4210-combiner";
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
reg = <0x10440000 0x1000>;
|
||||
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
|
||||
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
|
||||
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
|
||||
|
|
@ -75,10 +63,10 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
|
||||
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
|
||||
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
|
||||
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
|
||||
<0 32 0>;
|
||||
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
|
||||
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
|
||||
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
|
||||
<0 32 0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -87,170 +75,6 @@
|
|||
reg = <0x03860000 0x1000>;
|
||||
};
|
||||
|
||||
watchdog@10060000 {
|
||||
compatible = "samsung,s3c2410-wdt";
|
||||
reg = <0x10060000 0x100>;
|
||||
interrupts = <0 43 0>;
|
||||
};
|
||||
|
||||
rtc@10070000 {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x10070000 0x100>;
|
||||
interrupts = <0 44 0>, <0 45 0>;
|
||||
};
|
||||
|
||||
keypad@100A0000 {
|
||||
compatible = "samsung,s5pv210-keypad";
|
||||
reg = <0x100A0000 0x100>;
|
||||
interrupts = <0 109 0>;
|
||||
};
|
||||
|
||||
sdhci@12510000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12510000 0x100>;
|
||||
interrupts = <0 73 0>;
|
||||
};
|
||||
|
||||
sdhci@12520000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12520000 0x100>;
|
||||
interrupts = <0 74 0>;
|
||||
};
|
||||
|
||||
sdhci@12530000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12530000 0x100>;
|
||||
interrupts = <0 75 0>;
|
||||
};
|
||||
|
||||
sdhci@12540000 {
|
||||
compatible = "samsung,exynos4210-sdhci";
|
||||
reg = <0x12540000 0x100>;
|
||||
interrupts = <0 76 0>;
|
||||
};
|
||||
|
||||
serial@13800000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13800000 0x100>;
|
||||
interrupts = <0 52 0>;
|
||||
};
|
||||
|
||||
serial@13810000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13810000 0x100>;
|
||||
interrupts = <0 53 0>;
|
||||
};
|
||||
|
||||
serial@13820000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13820000 0x100>;
|
||||
interrupts = <0 54 0>;
|
||||
};
|
||||
|
||||
serial@13830000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13830000 0x100>;
|
||||
interrupts = <0 55 0>;
|
||||
};
|
||||
|
||||
i2c@13860000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13860000 0x100>;
|
||||
interrupts = <0 58 0>;
|
||||
};
|
||||
|
||||
i2c@13870000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13870000 0x100>;
|
||||
interrupts = <0 59 0>;
|
||||
};
|
||||
|
||||
i2c@13880000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13880000 0x100>;
|
||||
interrupts = <0 60 0>;
|
||||
};
|
||||
|
||||
i2c@13890000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13890000 0x100>;
|
||||
interrupts = <0 61 0>;
|
||||
};
|
||||
|
||||
i2c@138A0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138A0000 0x100>;
|
||||
interrupts = <0 62 0>;
|
||||
};
|
||||
|
||||
i2c@138B0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138B0000 0x100>;
|
||||
interrupts = <0 63 0>;
|
||||
};
|
||||
|
||||
i2c@138C0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138C0000 0x100>;
|
||||
interrupts = <0 64 0>;
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138D0000 0x100>;
|
||||
interrupts = <0 65 0>;
|
||||
};
|
||||
|
||||
spi_0: spi@13920000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13920000 0x100>;
|
||||
interrupts = <0 66 0>;
|
||||
tx-dma-channel = <&pdma0 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 6>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13930000 0x100>;
|
||||
interrupts = <0 67 0>;
|
||||
tx-dma-channel = <&pdma1 7>; /* preliminary */
|
||||
rx-dma-channel = <&pdma1 6>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
spi_2: spi@13940000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13940000 0x100>;
|
||||
interrupts = <0 68 0>;
|
||||
tx-dma-channel = <&pdma0 9>; /* preliminary */
|
||||
rx-dma-channel = <&pdma0 8>; /* preliminary */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
amba {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "arm,amba-bus";
|
||||
interrupt-parent = <&gic>;
|
||||
ranges;
|
||||
|
||||
pdma0: pdma@12680000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12680000 0x1000>;
|
||||
interrupts = <0 35 0>;
|
||||
};
|
||||
|
||||
pdma1: pdma@12690000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12690000 0x1000>;
|
||||
interrupts = <0 36 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-controllers {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -16,12 +16,19 @@
|
|||
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
|
||||
compatible = "samsung,smdk5250", "samsung,exynos5250";
|
||||
|
||||
aliases {
|
||||
mshc0 = &dwmmc_0;
|
||||
mshc1 = &dwmmc_1;
|
||||
mshc2 = &dwmmc_2;
|
||||
mshc3 = &dwmmc_3;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x80000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
|
||||
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
|
||||
};
|
||||
|
||||
i2c@12C60000 {
|
||||
|
|
@ -72,6 +79,56 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
dwmmc_0: dwmmc0@12200000 {
|
||||
num-slots = <1>;
|
||||
supports-highspeed;
|
||||
broken-cd;
|
||||
fifo-depth = <0x80>;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <2 3 3>;
|
||||
samsung,dw-mshc-ddr-timing = <1 2 3>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
|
||||
<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
|
||||
<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
|
||||
<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
|
||||
<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
|
||||
};
|
||||
};
|
||||
|
||||
dwmmc_1: dwmmc1@12210000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
dwmmc_2: dwmmc2@12220000 {
|
||||
num-slots = <1>;
|
||||
supports-highspeed;
|
||||
fifo-depth = <0x80>;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <2 3 3>;
|
||||
samsung,dw-mshc-ddr-timing = <1 2 3>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
|
||||
gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
|
||||
<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
|
||||
<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>,
|
||||
<&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>,
|
||||
<&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>;
|
||||
};
|
||||
};
|
||||
|
||||
dwmmc_3: dwmmc3@12230000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@12d20000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -182,6 +182,38 @@
|
|||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
dwmmc0@12200000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12200000 0x1000>;
|
||||
interrupts = <0 75 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
dwmmc1@12210000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12210000 0x1000>;
|
||||
interrupts = <0 76 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
dwmmc2@12220000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12220000 0x1000>;
|
||||
interrupts = <0 77 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
dwmmc3@12230000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12230000 0x1000>;
|
||||
interrupts = <0 78 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
amba {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
zreladdr-y += 0x40008000
|
||||
params_phys-y := 0x40000100
|
||||
|
||||
dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
|
||||
dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb exynos4210-trats.dtb
|
||||
dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
|
||||
|
|
|
|||
|
|
@ -569,34 +569,29 @@ static struct clk exynos5_init_clocks_off[] = {
|
|||
.enable = exynos5_clk_ip_peris_ctrl,
|
||||
.ctrlbit = (1 << 19),
|
||||
}, {
|
||||
.name = "hsmmc",
|
||||
.devname = "exynos4-sdhci.0",
|
||||
.name = "biu", /* bus interface unit clock */
|
||||
.devname = "dw_mmc.0",
|
||||
.parent = &exynos5_clk_aclk_200.clk,
|
||||
.enable = exynos5_clk_ip_fsys_ctrl,
|
||||
.ctrlbit = (1 << 12),
|
||||
}, {
|
||||
.name = "hsmmc",
|
||||
.devname = "exynos4-sdhci.1",
|
||||
.name = "biu",
|
||||
.devname = "dw_mmc.1",
|
||||
.parent = &exynos5_clk_aclk_200.clk,
|
||||
.enable = exynos5_clk_ip_fsys_ctrl,
|
||||
.ctrlbit = (1 << 13),
|
||||
}, {
|
||||
.name = "hsmmc",
|
||||
.devname = "exynos4-sdhci.2",
|
||||
.name = "biu",
|
||||
.devname = "dw_mmc.2",
|
||||
.parent = &exynos5_clk_aclk_200.clk,
|
||||
.enable = exynos5_clk_ip_fsys_ctrl,
|
||||
.ctrlbit = (1 << 14),
|
||||
}, {
|
||||
.name = "hsmmc",
|
||||
.devname = "exynos4-sdhci.3",
|
||||
.name = "biu",
|
||||
.devname = "dw_mmc.3",
|
||||
.parent = &exynos5_clk_aclk_200.clk,
|
||||
.enable = exynos5_clk_ip_fsys_ctrl,
|
||||
.ctrlbit = (1 << 15),
|
||||
}, {
|
||||
.name = "dwmci",
|
||||
.parent = &exynos5_clk_aclk_200.clk,
|
||||
.enable = exynos5_clk_ip_fsys_ctrl,
|
||||
.ctrlbit = (1 << 16),
|
||||
}, {
|
||||
.name = "sata",
|
||||
.devname = "ahci",
|
||||
|
|
@ -1015,8 +1010,8 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
|
|||
|
||||
static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
|
||||
.clk = {
|
||||
.name = "sclk_mmc",
|
||||
.devname = "exynos4-sdhci.0",
|
||||
.name = "ciu", /* card interface unit clock */
|
||||
.devname = "dw_mmc.0",
|
||||
.parent = &exynos5_clk_dout_mmc0.clk,
|
||||
.enable = exynos5_clksrc_mask_fsys_ctrl,
|
||||
.ctrlbit = (1 << 0),
|
||||
|
|
@ -1026,8 +1021,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
|
|||
|
||||
static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
|
||||
.clk = {
|
||||
.name = "sclk_mmc",
|
||||
.devname = "exynos4-sdhci.1",
|
||||
.name = "ciu",
|
||||
.devname = "dw_mmc.1",
|
||||
.parent = &exynos5_clk_dout_mmc1.clk,
|
||||
.enable = exynos5_clksrc_mask_fsys_ctrl,
|
||||
.ctrlbit = (1 << 4),
|
||||
|
|
@ -1037,8 +1032,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
|
|||
|
||||
static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
|
||||
.clk = {
|
||||
.name = "sclk_mmc",
|
||||
.devname = "exynos4-sdhci.2",
|
||||
.name = "ciu",
|
||||
.devname = "dw_mmc.2",
|
||||
.parent = &exynos5_clk_dout_mmc2.clk,
|
||||
.enable = exynos5_clksrc_mask_fsys_ctrl,
|
||||
.ctrlbit = (1 << 8),
|
||||
|
|
@ -1048,8 +1043,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
|
|||
|
||||
static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
|
||||
.clk = {
|
||||
.name = "sclk_mmc",
|
||||
.devname = "exynos4-sdhci.3",
|
||||
.name = "ciu",
|
||||
.devname = "dw_mmc.3",
|
||||
.parent = &exynos5_clk_dout_mmc3.clk,
|
||||
.enable = exynos5_clksrc_mask_fsys_ctrl,
|
||||
.ctrlbit = (1 << 12),
|
||||
|
|
@ -1122,14 +1117,6 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = {
|
|||
|
||||
static struct clksrc_clk exynos5_clksrcs[] = {
|
||||
{
|
||||
.clk = {
|
||||
.name = "sclk_dwmci",
|
||||
.parent = &exynos5_clk_dout_mmc4.clk,
|
||||
.enable = exynos5_clksrc_mask_fsys_ctrl,
|
||||
.ctrlbit = (1 << 16),
|
||||
},
|
||||
.reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
|
||||
}, {
|
||||
.clk = {
|
||||
.name = "sclk_fimd",
|
||||
.devname = "s3cfb.1",
|
||||
|
|
|
|||
|
|
@ -173,6 +173,10 @@
|
|||
|
||||
#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
|
||||
#define EXYNOS4_PA_DWMCI 0x12550000
|
||||
#define EXYNOS5_PA_DWMCI0 0x12200000
|
||||
#define EXYNOS5_PA_DWMCI1 0x12210000
|
||||
#define EXYNOS5_PA_DWMCI2 0x12220000
|
||||
#define EXYNOS5_PA_DWMCI3 0x12230000
|
||||
|
||||
#define EXYNOS4_PA_HSOTG 0x12480000
|
||||
#define EXYNOS4_PA_USB_HSPHY 0x125B0000
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Samsung's Exynos4210 flattened device tree enabled machine
|
||||
* Samsung's EXYNOS4 flattened device tree enabled machine
|
||||
*
|
||||
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
|
|
@ -36,7 +36,7 @@
|
|||
* at some point, the drivers should be capable of parsing all the platform
|
||||
* data from the device tree.
|
||||
*/
|
||||
static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
|
||||
static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
|
||||
"exynos4210-uart.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
|
||||
|
|
@ -55,6 +55,20 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
|
|||
"exynos4-sdhci.3", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
|
||||
"s3c2440-i2c.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
|
||||
"s3c2440-i2c.1", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
|
||||
"s3c2440-i2c.2", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
|
||||
"s3c2440-i2c.3", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
|
||||
"s3c2440-i2c.4", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
|
||||
"s3c2440-i2c.5", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
|
||||
"s3c2440-i2c.6", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
|
||||
"s3c2440-i2c.7", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
|
||||
"exynos4210-spi.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
|
||||
|
|
@ -66,19 +80,19 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
|
|||
{},
|
||||
};
|
||||
|
||||
static void __init exynos4210_dt_map_io(void)
|
||||
static void __init exynos4_dt_map_io(void)
|
||||
{
|
||||
exynos_init_io(NULL, 0);
|
||||
s3c24xx_init_clocks(24000000);
|
||||
}
|
||||
|
||||
static void __init exynos4210_dt_machine_init(void)
|
||||
static void __init exynos4_dt_machine_init(void)
|
||||
{
|
||||
of_platform_populate(NULL, of_default_bus_match_table,
|
||||
exynos4210_auxdata_lookup, NULL);
|
||||
exynos4_auxdata_lookup, NULL);
|
||||
}
|
||||
|
||||
static char const *exynos4210_dt_compat[] __initdata = {
|
||||
static char const *exynos4_dt_compat[] __initdata = {
|
||||
"samsung,exynos4210",
|
||||
NULL
|
||||
};
|
||||
|
|
@ -86,11 +100,11 @@ static char const *exynos4210_dt_compat[] __initdata = {
|
|||
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
|
||||
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
|
||||
.init_irq = exynos4_init_irq,
|
||||
.map_io = exynos4210_dt_map_io,
|
||||
.map_io = exynos4_dt_map_io,
|
||||
.handle_irq = gic_handle_irq,
|
||||
.init_machine = exynos4210_dt_machine_init,
|
||||
.init_machine = exynos4_dt_machine_init,
|
||||
.init_late = exynos_init_late,
|
||||
.timer = &exynos4_timer,
|
||||
.dt_compat = exynos4210_dt_compat,
|
||||
.dt_compat = exynos4_dt_compat,
|
||||
.restart = exynos4_restart,
|
||||
MACHINE_END
|
||||
|
|
|
|||
|
|
@ -47,6 +47,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
|
|||
"s3c2440-i2c.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
|
||||
"s3c2440-i2c.1", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
|
||||
"dw_mmc.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
|
||||
"dw_mmc.1", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
|
||||
"dw_mmc.2", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
|
||||
"dw_mmc.3", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
|
||||
"exynos4210-spi.0", NULL),
|
||||
OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче