ARM: dts: da850-evm: Correct the audio codec regulators

Add the board level fixed regulators for 3.3V and 1.8V which is used to
power - among other things - the tlv320aic3106 codec.

Apart from removing the following warning during boot:
tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000

With the correct voltages the driver can select correct OCMV value to
reduce pop noise.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

arch/arm/boot/dts/da850-evm.dts

@@ -94,6 +94,28 @@
 		regulator-boot-on;
 	};
 
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	backlight_lcd: backlight-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_backlight_pwr";
@@ -210,10 +232,9 @@
 
 		/* Regulators */
 		IOVDD-supply = <&vdcdc2_reg>;
-		/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-		AVDD-supply = <&vbat>;
-		DRVDD-supply = <&vbat>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
 	};
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";