regulator: da903x: Convert to regulator_list_voltage_linear()
Use regulator_list_voltage_linear() to replace da903x_list_voltage(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Axel Lin
Mark Brown
Родитель
9a00630c3d
Коммит
70b4e7862d
|
|
@ -76,9 +76,7 @@
|
|||
struct da903x_regulator_info {
|
||||
struct regulator_desc desc;
|
||||
|
||||
int min_uV;
|
||||
int max_uV;
|
||||
int step_uV;
|
||||
int vol_reg;
|
||||
int vol_shift;
|
||||
int vol_nbits;
|
||||
|
|
@ -96,7 +94,7 @@ static inline struct device *to_da903x_dev(struct regulator_dev *rdev)
|
|||
static inline int check_range(struct da903x_regulator_info *info,
|
||||
int min_uV, int max_uV)
|
||||
{
|
||||
if (min_uV < info->min_uV || min_uV > info->max_uV)
|
||||
if (min_uV < info->desc.min_uV || min_uV > info->max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
|
|
@ -115,7 +113,7 @@ static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
|
||||
val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
|
||||
*selector = val;
|
||||
val <<= info->vol_shift;
|
||||
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
|
||||
|
|
@ -172,17 +170,6 @@ static int da903x_is_enabled(struct regulator_dev *rdev)
|
|||
return !!(reg_val & (1 << info->enable_bit));
|
||||
}
|
||||
|
||||
static int da903x_list_voltage(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
int ret;
|
||||
|
||||
ret = info->min_uV + info->step_uV * selector;
|
||||
if (ret > info->max_uV)
|
||||
return -EINVAL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* DA9030 specific operations */
|
||||
static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
|
||||
int min_uV, int max_uV,
|
||||
|
|
@ -198,7 +185,7 @@ static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
|
||||
val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
|
||||
*selector = val;
|
||||
val <<= info->vol_shift;
|
||||
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
|
||||
|
|
@ -227,12 +214,12 @@ static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
thresh = (info->max_uV + info->min_uV) / 2;
|
||||
thresh = (info->max_uV + info->desc.min_uV) / 2;
|
||||
if (min_uV < thresh) {
|
||||
val = DIV_ROUND_UP(thresh - min_uV, info->step_uV);
|
||||
val = DIV_ROUND_UP(thresh - min_uV, info->desc.uV_step);
|
||||
val |= 0x4;
|
||||
} else {
|
||||
val = DIV_ROUND_UP(min_uV - thresh, info->step_uV);
|
||||
val = DIV_ROUND_UP(min_uV - thresh, info->desc.uV_step);
|
||||
}
|
||||
|
||||
*selector = val;
|
||||
|
|
@ -266,10 +253,11 @@ static int da9030_list_ldo14_voltage(struct regulator_dev *rdev,
|
|||
int volt;
|
||||
|
||||
if (selector & 0x4)
|
||||
volt = info->min_uV + info->step_uV * (3 - (selector & ~0x4));
|
||||
volt = rdev->desc->min_uV +
|
||||
rdev->desc->uV_step * (3 - (selector & ~0x4));
|
||||
else
|
||||
volt = (info->max_uV + info->min_uV) / 2 +
|
||||
info->step_uV * (selector & ~0x4);
|
||||
volt = (info->max_uV + rdev->desc->min_uV) / 2 +
|
||||
rdev->desc->uV_step * (selector & ~0x4);
|
||||
|
||||
if (volt > info->max_uV)
|
||||
return -EINVAL;
|
||||
|
|
@ -291,7 +279,7 @@ static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
|
||||
val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
|
||||
*selector = val;
|
||||
val <<= info->vol_shift;
|
||||
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
|
||||
|
|
@ -317,7 +305,7 @@ static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV);
|
||||
val = DIV_ROUND_UP(min_uV - info->desc.min_uV, info->desc.uV_step);
|
||||
val = (val >= 20) ? val - 12 : ((val > 7) ? 8 : val);
|
||||
*selector = val;
|
||||
val <<= info->vol_shift;
|
||||
|
|
@ -350,9 +338,9 @@ static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
|
|||
int volt;
|
||||
|
||||
if (selector >= 8)
|
||||
volt = 2700000 + info->step_uV * (selector - 8);
|
||||
volt = 2700000 + rdev->desc->uV_step * (selector - 8);
|
||||
else
|
||||
volt = info->min_uV + info->step_uV * selector;
|
||||
volt = rdev->desc->min_uV + rdev->desc->uV_step * selector;
|
||||
|
||||
if (volt > info->max_uV)
|
||||
return -EINVAL;
|
||||
|
|
@ -363,7 +351,7 @@ static int da9034_list_ldo12_voltage(struct regulator_dev *rdev,
|
|||
static struct regulator_ops da903x_regulator_ldo_ops = {
|
||||
.set_voltage = da903x_set_ldo_voltage,
|
||||
.get_voltage_sel = da903x_get_voltage_sel,
|
||||
.list_voltage = da903x_list_voltage,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.enable = da903x_enable,
|
||||
.disable = da903x_disable,
|
||||
.is_enabled = da903x_is_enabled,
|
||||
|
|
@ -383,7 +371,7 @@ static struct regulator_ops da9030_regulator_ldo14_ops = {
|
|||
static struct regulator_ops da9030_regulator_ldo1_15_ops = {
|
||||
.set_voltage = da9030_set_ldo1_15_voltage,
|
||||
.get_voltage_sel = da903x_get_voltage_sel,
|
||||
.list_voltage = da903x_list_voltage,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.enable = da903x_enable,
|
||||
.disable = da903x_disable,
|
||||
.is_enabled = da903x_is_enabled,
|
||||
|
|
@ -392,7 +380,7 @@ static struct regulator_ops da9030_regulator_ldo1_15_ops = {
|
|||
static struct regulator_ops da9034_regulator_dvc_ops = {
|
||||
.set_voltage = da9034_set_dvc_voltage,
|
||||
.get_voltage_sel = da903x_get_voltage_sel,
|
||||
.list_voltage = da903x_list_voltage,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.enable = da903x_enable,
|
||||
.disable = da903x_disable,
|
||||
.is_enabled = da903x_is_enabled,
|
||||
|
|
@ -417,10 +405,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
|
|||
.id = _pmic##_ID_LDO##_id, \
|
||||
.n_voltages = (step) ? ((max - min) / step + 1) : 1, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.uV_step = (step) * 1000, \
|
||||
}, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.max_uV = (max) * 1000, \
|
||||
.step_uV = (step) * 1000, \
|
||||
.vol_reg = _pmic##_##vreg, \
|
||||
.vol_shift = (shift), \
|
||||
.vol_nbits = (nbits), \
|
||||
|
|
@ -437,10 +425,10 @@ static struct regulator_ops da9034_regulator_ldo12_ops = {
|
|||
.id = _pmic##_ID_##_id, \
|
||||
.n_voltages = (step) ? ((max - min) / step + 1) : 1, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.uV_step = (step) * 1000, \
|
||||
}, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.max_uV = (max) * 1000, \
|
||||
.step_uV = (step) * 1000, \
|
||||
.vol_reg = _pmic##_##vreg, \
|
||||
.vol_shift = (0), \
|
||||
.vol_nbits = (nbits), \
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче