microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'bnx2x-next' 

Yuval Mintz says:

====================
bnx2x: update FW, rebrand and more

This patch series does several things - it updates the bnx2x FW into
7.12.30 which both contains some small fixes as well as opening the door
for several new features for the device - mainly vxlan/geneve offloads
and vlan filtering offload.
It then adds a new Multi-function mode [BD] which requires this FW in
order to operate.

In addition, this finally rebrands the driver from a 'broadcom' driver
into a 'qlogic' driver [although it would still reside under Broadcom's
tree in the kernel].
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2015-07-22 10:47:27 -07:00
Родитель b56ea2985d 3a375e3caf
Коммит 70c9bb8b92
25 изменённых файлов: 813 добавлений и 247 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

11
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x.h: Broadcom Everest network driver.
/* bnx2x.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -30,7 +32,7 @@
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
#define DRV_MODULE_VERSION "1.710.51-0"
#define DRV_MODULE_VERSION "1.712.30-0"
#define DRV_MODULE_RELDATE "2014/02/10"
#define BNX2X_BC_VER 0x040200
@ -1422,6 +1424,7 @@ enum {
SUB_MF_MODE_UNKNOWN = 0,
SUB_MF_MODE_UFP,
SUB_MF_MODE_NPAR1_DOT_5,
SUB_MF_MODE_BD,
};
struct bnx2x {
@ -1636,6 +1639,8 @@ struct bnx2x {
u8 mf_sub_mode;
#define IS_MF_UFP(bp) (IS_MF_SD(bp) && \
bp->mf_sub_mode == SUB_MF_MODE_UFP)
#define IS_MF_BD(bp) (IS_MF_SD(bp) && \
bp->mf_sub_mode == SUB_MF_MODE_BD)
u8 wol;
@ -2577,6 +2582,8 @@ void bnx2x_set_local_cmng(struct bnx2x *bp);
void bnx2x_update_mng_version(struct bnx2x *bp);
void bnx2x_update_mfw_dump(struct bnx2x *bp);
#define MCPR_SCRATCH_BASE(bp) \
(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)

93
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_cmn.c: Broadcom Everest network driver.
/* bnx2x_cmn.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -2103,9 +2105,14 @@ int bnx2x_rss(struct bnx2x *bp, struct bnx2x_rss_config_obj *rss_obj,
if (rss_obj->udp_rss_v6)
__set_bit(BNX2X_RSS_IPV6_UDP, &params.rss_flags);
if (!CHIP_IS_E1x(bp))
if (!CHIP_IS_E1x(bp)) {
/* valid only for TUNN_MODE_VXLAN tunnel mode */
__set_bit(BNX2X_RSS_IPV4_VXLAN, &params.rss_flags);
__set_bit(BNX2X_RSS_IPV6_VXLAN, &params.rss_flags);
/* valid only for TUNN_MODE_GRE tunnel mode */
__set_bit(BNX2X_RSS_GRE_INNER_HDRS, &params.rss_flags);
__set_bit(BNX2X_RSS_TUNN_INNER_HDRS, &params.rss_flags);
}
} else {
__set_bit(BNX2X_RSS_MODE_DISABLED, &params.rss_flags);
}
@ -2510,6 +2517,20 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
fp->mode = TPA_MODE_DISABLED;
}
void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state)
{
u32 cur;
if (!IS_MF_BD(bp) || !SHMEM2_HAS(bp, os_driver_state) || IS_VF(bp))
return;
cur = SHMEM2_RD(bp, os_driver_state[BP_FW_MB_IDX(bp)]);
DP(NETIF_MSG_IFUP, "Driver state %08x-->%08x\n",
cur, state);
SHMEM2_WR(bp, os_driver_state[BP_FW_MB_IDX(bp)], state);
}
int bnx2x_load_cnic(struct bnx2x *bp)
{
int i, rc, port = BP_PORT(bp);
@ -2873,6 +2894,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
/* mark driver is loaded in shmem2 */
u32 val;
val = SHMEM2_RD(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)]);
val &= ~DRV_FLAGS_MTU_MASK;
val |= (bp->dev->mtu << DRV_FLAGS_MTU_SHIFT);
SHMEM2_WR(bp, drv_capabilities_flag[BP_FW_MB_IDX(bp)],
val | DRV_FLAGS_CAPABILITIES_LOADED_SUPPORTED |
DRV_FLAGS_CAPABILITIES_LOADED_L2);
@ -2885,10 +2908,17 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
return -EBUSY;
}
/* Update driver data for On-Chip MFW dump. */
if (IS_PF(bp))
bnx2x_update_mfw_dump(bp);
/* If PMF - send ADMIN DCBX msg to MFW to initiate DCBX FSM */
if (bp->port.pmf && (bp->state != BNX2X_STATE_DIAG))
bnx2x_dcbx_init(bp, false);
if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_ACTIVE);
DP(NETIF_MSG_IFUP, "Ending successfully NIC load\n");
return 0;
@ -2956,6 +2986,9 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode, bool keep_link)
DP(NETIF_MSG_IFUP, "Starting NIC unload\n");
if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
/* mark driver is unloaded in shmem2 */
if (IS_PF(bp) && SHMEM2_HAS(bp, drv_capabilities_flag)) {
u32 val;
@ -3677,7 +3710,7 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb,
pbd2->fw_ip_hdr_to_payload_w =
hlen_w - ((sizeof(struct ipv6hdr)) >> 1);
pbd_e2->data.tunnel_data.flags |=
ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER;
ETH_TUNNEL_DATA_IPV6_OUTER;
}
pbd2->tcp_send_seq = bswab32(inner_tcp_hdr(skb)->seq);
@ -4184,6 +4217,41 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
return NETDEV_TX_OK;
}
void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default)
{
int mfw_vn = BP_FW_MB_IDX(bp);
u32 tmp;
/* If the shmem shouldn't affect configuration, reflect */
if (!IS_MF_BD(bp)) {
int i;
for (i = 0; i < BNX2X_MAX_PRIORITY; i++)
c2s_map[i] = i;
*c2s_default = 0;
return;
}
tmp = SHMEM2_RD(bp, c2s_pcp_map_lower[mfw_vn]);
tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
c2s_map[0] = tmp & 0xff;
c2s_map[1] = (tmp >> 8) & 0xff;
c2s_map[2] = (tmp >> 16) & 0xff;
c2s_map[3] = (tmp >> 24) & 0xff;
tmp = SHMEM2_RD(bp, c2s_pcp_map_upper[mfw_vn]);
tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
c2s_map[4] = tmp & 0xff;
c2s_map[5] = (tmp >> 8) & 0xff;
c2s_map[6] = (tmp >> 16) & 0xff;
c2s_map[7] = (tmp >> 24) & 0xff;
tmp = SHMEM2_RD(bp, c2s_pcp_map_default[mfw_vn]);
tmp = (__force u32)be32_to_cpu((__force __be32)tmp);
*c2s_default = (tmp >> (8 * mfw_vn)) & 0xff;
}
/**
* bnx2x_setup_tc - routine to configure net_device for multi tc
*
@ -4194,8 +4262,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
*/
int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
{
int cos, prio, count, offset;
struct bnx2x *bp = netdev_priv(dev);
u8 c2s_map[BNX2X_MAX_PRIORITY], c2s_def;
int cos, prio, count, offset;
/* setup tc must be called under rtnl lock */
ASSERT_RTNL();
@ -4219,12 +4288,16 @@ int bnx2x_setup_tc(struct net_device *dev, u8 num_tc)
return -EINVAL;
}
bnx2x_get_c2s_mapping(bp, c2s_map, &c2s_def);
/* configure priority to traffic class mapping */
for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) {
netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]);
int outer_prio = c2s_map[prio];
netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[outer_prio]);
DP(BNX2X_MSG_SP | NETIF_MSG_IFUP,
"mapping priority %d to tc %d\n",
prio, bp->prio_to_cos[prio]);
outer_prio, bp->prio_to_cos[outer_prio]);
}
/* Use this configuration to differentiate tc0 from other COSes
@ -4278,6 +4351,9 @@ int bnx2x_change_mac_addr(struct net_device *dev, void *p)
if (netif_running(dev))
rc = bnx2x_set_eth_mac(bp, true);
if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
return rc;
}
@ -4831,6 +4907,9 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu)
*/
dev->mtu = new_mtu;
if (IS_PF(bp) && SHMEM2_HAS(bp, curr_cfg))
SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
return bnx2x_reload_if_running(dev);
}

44
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_cmn.h: Broadcom Everest network driver.
/* bnx2x_cmn.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -620,6 +622,14 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features);
*/
void bnx2x_tx_timeout(struct net_device *dev);
/** bnx2x_get_c2s_mapping - read inner-to-outer vlan configuration
* c2s_map should have BNX2X_MAX_PRIORITY entries.
* @bp: driver handle
* @c2s_map: should have BNX2X_MAX_PRIORITY entries for mapping
* @c2s_default: entry for non-tagged configuration
*/
void bnx2x_get_c2s_mapping(struct bnx2x *bp, u8 *c2s_map, u8 *c2s_default);
/*********************** Inlines **********************************/
/*********************** Fast path ********************************/
static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
@ -931,14 +941,33 @@ static inline int bnx2x_func_start(struct bnx2x *bp)
start_params->mf_mode = bp->mf_mode;
start_params->sd_vlan_tag = bp->mf_ov;
/* Configure Ethertype for BD mode */
if (IS_MF_BD(bp)) {
DP(NETIF_MSG_IFUP, "Configuring ethertype 0x88a8 for BD\n");
start_params->sd_vlan_eth_type = ETH_P_8021AD;
REG_WR(bp, PRS_REG_VLAN_TYPE_0, ETH_P_8021AD);
REG_WR(bp, PBF_REG_VLAN_TYPE_0, ETH_P_8021AD);
REG_WR(bp, NIG_REG_LLH_E1HOV_TYPE_1, ETH_P_8021AD);
bnx2x_get_c2s_mapping(bp, start_params->c2s_pri,
&start_params->c2s_pri_default);
start_params->c2s_pri_valid = 1;
DP(NETIF_MSG_IFUP,
"Inner-to-Outer priority: %02x %02x %02x %02x %02x %02x %02x %02x [Default %02x]\n",
start_params->c2s_pri[0], start_params->c2s_pri[1],
start_params->c2s_pri[2], start_params->c2s_pri[3],
start_params->c2s_pri[4], start_params->c2s_pri[5],
start_params->c2s_pri[6], start_params->c2s_pri[7],
start_params->c2s_pri_default);
}
if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp))
start_params->network_cos_mode = STATIC_COS;
else /* CHIP_IS_E1X */
start_params->network_cos_mode = FW_WRR;
start_params->tunnel_mode = TUNN_MODE_GRE;
start_params->gre_tunnel_type = IPGRE_TUNNEL;
start_params->inner_gre_rss_en = 1;
start_params->inner_rss = 1;
if (IS_MF_UFP(bp) && BNX2X_IS_MF_SD_PROTOCOL_FCOE(bp)) {
start_params->class_fail_ethtype = ETH_P_FIP;
@ -1339,4 +1368,11 @@ void bnx2x_squeeze_objects(struct bnx2x *bp);
void bnx2x_schedule_sp_rtnl(struct bnx2x*, enum sp_rtnl_flag,
u32 verbose);
/**
* bnx2x_set_os_driver_state - write driver state for management FW usage
*
* @bp: driver handle
* @state: OS_DRIVER_STATE_* value reflecting current driver state
*/
void bnx2x_set_os_driver_state(struct bnx2x *bp, u32 state);
#endif /* BNX2X_CMN_H */

12
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_dcb.c: Broadcom Everest network driver.
/* bnx2x_dcb.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
* Copyright 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@ -1850,6 +1852,8 @@ static void bnx2x_dcbx_fw_struct(struct bnx2x *bp,
if (bp->dcbx_port_params.ets.cos_params[cos].
pri_bitmask & pri_bit)
tt2cos[pri].cos = cos;
pfc_fw_cfg->dcb_outer_pri[pri] = ttp[pri];
}
/* we never want the FW to add a 0 vlan tag */

10
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_dcb.h: Broadcom Everest network driver.
/* bnx2x_dcb.h: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
* Copyright 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>

10
drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_dump.h: Broadcom Everest network driver.
/* bnx2x_dump.h: QLogic Everest network driver.
*
* Copyright (c) 2012-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*/

7
drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_ethtool.c: Broadcom Everest network driver.
/* bnx2x_ethtool.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -1129,6 +1131,9 @@ static int bnx2x_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
} else
bp->wol = 0;
if (SHMEM2_HAS(bp, curr_cfg))
SHMEM2_WR(bp, curr_cfg, CURR_CFG_MET_OS);
return 0;
}

6
drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_fw_defs.h: Broadcom Everest network driver.
/* bnx2x_fw_defs.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -372,7 +374,7 @@
#define MAX_COS_NUMBER 4
#define MAX_TRAFFIC_TYPES 8
#define MAX_PFC_PRIORITIES 8
#define MAX_VLAN_PRIORITIES 8
/* used by array traffic_type_to_priority[] to mark traffic type \
that is not mapped to priority*/
#define LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED 0xFF

2
drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_fw_file_hdr.h: FW binary file header structure.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

185
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_hsi.h: Broadcom Everest network driver.
/* bnx2x_hsi.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -729,6 +731,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8722 0x00000f00
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54616 0x00001000
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84834 0x00001100
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84858 0x00001200
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN 0x0000ff00
@ -786,6 +789,7 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722 0x00000f00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616 0x00001000
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834 0x00001100
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858 0x00001200
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT_WC 0x0000fc00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00
#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00
@ -864,6 +868,7 @@ struct shared_feat_cfg { /* NVRAM Offset */
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4 0x00000200
#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT 0x00000300
#define SHARED_FEAT_CFG_FORCE_SF_MODE_AFEX_MODE 0x00000400
#define SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE 0x00000500
#define SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE 0x00000600
#define SHARED_FEAT_CFG_FORCE_SF_MODE_EXTENDED_MODE 0x00000700
@ -2064,6 +2069,26 @@ struct ncsi_oem_fcoe_features {
#define FCOE_FEATURES4_FEATURE_SETTINGS_OFFSET 0
};
enum curr_cfg_method_e {
CURR_CFG_MET_NONE = 0, /* default config */
CURR_CFG_MET_OS = 1,
CURR_CFG_MET_VENDOR_SPEC = 2,/* e.g. Option ROM, NPAR, O/S Cfg Utils */
};
struct mdump_driver_info {
u32 epoc;
u32 drv_ver;
u32 fw_ver;
u32 valid_dump;
#define FIRST_DUMP_VALID (1 << 0)
#define SECOND_DUMP_VALID (1 << 1)
u32 flags;
#define ENABLE_ALL_TRIGGERS (0x7fffffff)
#define TRIGGER_MDUMP_ONCE (1 << 31)
};
struct ncsi_oem_data {
u32 driver_version[4];
struct ncsi_oem_fcoe_features ncsi_oem_fcoe_features;
@ -2187,6 +2212,8 @@ struct shmem2_region {
#define DRV_FLAGS_CAPABILITIES_LOADED_L2 0x00000002
#define DRV_FLAGS_CAPABILITIES_LOADED_FCOE 0x00000004
#define DRV_FLAGS_CAPABILITIES_LOADED_ISCSI 0x00000008
#define DRV_FLAGS_MTU_MASK 0xffff0000
#define DRV_FLAGS_MTU_SHIFT 16
u32 extended_dev_info_shared_cfg_size;
@ -2251,6 +2278,7 @@ struct shmem2_region {
u32 reserved4; /* Offset 0x150 */
u32 link_attr_sync[PORT_MAX]; /* Offset 0x154 */
#define LINK_ATTR_SYNC_KR2_ENABLE 0x00000001
#define LINK_ATTR_84858 0x00000002
#define LINK_SFP_EEPROM_COMP_CODE_MASK 0x0000ff00
#define LINK_SFP_EEPROM_COMP_CODE_SHIFT 8
#define LINK_SFP_EEPROM_COMP_CODE_SR 0x00001000
@ -2268,6 +2296,74 @@ struct shmem2_region {
/* We use indication for each PF (0..3) */
#define MFW_DRV_IND_READ_DONE_OFFSET(_pf_) (1 << (_pf_))
union { /* For various OEMs */ /* Offset 0x1a0 */
u8 storage_boot_prog[E2_FUNC_MAX];
#define STORAGE_BOOT_PROG_MASK 0x000000FF
#define STORAGE_BOOT_PROG_NONE 0x00000000
#define STORAGE_BOOT_PROG_ISCSI_IP_ACQUIRED 0x00000002
#define STORAGE_BOOT_PROG_FCOE_FABRIC_LOGIN_SUCCESS 0x00000002
#define STORAGE_BOOT_PROG_TARGET_FOUND 0x00000004
#define STORAGE_BOOT_PROG_ISCSI_CHAP_SUCCESS 0x00000008
#define STORAGE_BOOT_PROG_FCOE_LUN_FOUND 0x00000008
#define STORAGE_BOOT_PROG_LOGGED_INTO_TGT 0x00000010
#define STORAGE_BOOT_PROG_IMG_DOWNLOADED 0x00000020
#define STORAGE_BOOT_PROG_OS_HANDOFF 0x00000040
#define STORAGE_BOOT_PROG_COMPLETED 0x00000080
u32 oem_i2c_data_addr;
};
/* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */
/* For PCP values 0-3 use the map lower */
/* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1,
* 0x0000FF00 - PCP 2, 0x000000FF PCP 3
*/
u32 c2s_pcp_map_lower[E2_FUNC_MAX]; /* 0x1a4 */
/* For PCP values 4-7 use the map upper */
/* 0xFF000000 - PCP 4, 0x00FF0000 - PCP 5,
* 0x0000FF00 - PCP 6, 0x000000FF PCP 7
*/
u32 c2s_pcp_map_upper[E2_FUNC_MAX]; /* 0x1b4 */
/* For PCP default value get the MSB byte of the map default */
u32 c2s_pcp_map_default[E2_FUNC_MAX]; /* 0x1c4 */
/* FC_NPIV table offset in NVRAM */
u32 fc_npiv_nvram_tbl_addr[PORT_MAX]; /* 0x1d4 */
/* Shows last method that changed configuration of this device */
enum curr_cfg_method_e curr_cfg; /* 0x1dc */
/* Storm FW version, shold be kept in the format 0xMMmmbbdd:
* MM - Major, mm - Minor, bb - Build ,dd - Drop
*/
u32 netproc_fw_ver; /* 0x1e0 */
/* Option ROM SMASH CLP version */
u32 clp_ver; /* 0x1e4 */
u32 pcie_bus_num; /* 0x1e8 */
u32 sriov_switch_mode; /* 0x1ec */
#define SRIOV_SWITCH_MODE_NONE 0x0
#define SRIOV_SWITCH_MODE_VEB 0x1
#define SRIOV_SWITCH_MODE_VEPA 0x2
u8 rsrv2[E2_FUNC_MAX]; /* 0x1f0 */
u32 img_inv_table_addr; /* Address to INV_TABLE_P */ /* 0x1f4 */
u32 mtu_size[E2_FUNC_MAX]; /* 0x1f8 */
u32 os_driver_state[E2_FUNC_MAX]; /* 0x208 */
#define OS_DRIVER_STATE_NOT_LOADED 0 /* not installed */
#define OS_DRIVER_STATE_LOADING 1 /* transition state */
#define OS_DRIVER_STATE_DISABLED 2 /* installed but disabled */
#define OS_DRIVER_STATE_ACTIVE 3 /* installed and active */
/* mini dump driver info */
struct mdump_driver_info drv_info; /* 0x218 */
};
@ -2898,8 +2994,8 @@ struct afex_stats {
};
#define BCM_5710_FW_MAJOR_VERSION 7
#define BCM_5710_FW_MINOR_VERSION 10
#define BCM_5710_FW_REVISION_VERSION 51
#define BCM_5710_FW_MINOR_VERSION 12
#define BCM_5710_FW_REVISION_VERSION 30
#define BCM_5710_FW_ENGINEERING_VERSION 0
#define BCM_5710_FW_COMPILE_FLAGS 1
@ -3901,7 +3997,11 @@ struct eth_fast_path_rx_cqe {
__le16 len_on_bd;
struct parsing_flags pars_flags;
union eth_sgl_or_raw_data sgl_or_raw_data;
__le32 reserved1[7];
u8 tunn_type;
u8 tunn_inner_hdrs_offset;
__le16 reserved1;
__le32 tunn_tenant_id;
__le32 padding[5];
u32 marker;
};
@ -4012,8 +4112,8 @@ struct eth_tunnel_data {
__le16 pseudo_csum;
u8 ip_hdr_start_inner_w;
u8 flags;
#define ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER (0x1<<0)
#define ETH_TUNNEL_DATA_IP_HDR_TYPE_OUTER_SHIFT 0
#define ETH_TUNNEL_DATA_IPV6_OUTER (0x1<<0)
#define ETH_TUNNEL_DATA_IPV6_OUTER_SHIFT 0
#define ETH_TUNNEL_DATA_RESERVED (0x7F<<1)
#define ETH_TUNNEL_DATA_RESERVED_SHIFT 1
};
@ -4120,16 +4220,12 @@ struct eth_rss_update_ramrod_data {
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY_SHIFT 6
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY (0x1<<7)
#define ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY_SHIFT 7
#define ETH_RSS_UPDATE_RAMROD_DATA_EN_5_TUPLE_CAPABILITY (0x1<<8)
#define ETH_RSS_UPDATE_RAMROD_DATA_EN_5_TUPLE_CAPABILITY_SHIFT 8
#define ETH_RSS_UPDATE_RAMROD_DATA_NVGRE_KEY_ENTROPY_CAPABILITY (0x1<<9)
#define ETH_RSS_UPDATE_RAMROD_DATA_NVGRE_KEY_ENTROPY_CAPABILITY_SHIFT 9
#define ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY (0x1<<10)
#define ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY_SHIFT 10
#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY (0x1<<11)
#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY_SHIFT 11
#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED (0xF<<12)
#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED_SHIFT 12
#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY (0x1<<8)
#define ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY_SHIFT 8
#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY (0x1<<9)
#define ETH_RSS_UPDATE_RAMROD_DATA_UPDATE_RSS_KEY_SHIFT 9
#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED (0x3F<<10)
#define ETH_RSS_UPDATE_RAMROD_DATA_RESERVED_SHIFT 10
u8 rss_result_mask;
u8 reserved3;
__le16 reserved4;
@ -4314,6 +4410,18 @@ enum eth_tunnel_non_lso_csum_location {
MAX_ETH_TUNNEL_NON_LSO_CSUM_LOCATION
};
enum eth_tunn_type {
TUNN_TYPE_NONE,
TUNN_TYPE_VXLAN,
TUNN_TYPE_L2_GRE,
TUNN_TYPE_IPV4_GRE,
TUNN_TYPE_IPV6_GRE,
TUNN_TYPE_L2_GENEVE,
TUNN_TYPE_IPV4_GENEVE,
TUNN_TYPE_IPV6_GENEVE,
MAX_ETH_TUNN_TYPE
};
/*
* Tx regular BD structure
*/
@ -4758,6 +4866,9 @@ struct afex_vif_list_ramrod_data {
__le16 reserved1;
};
struct c2s_pri_trans_table_entry {
u8 val[MAX_VLAN_PRIORITIES];
};
/*
* cfc delete event data
@ -5246,6 +5357,7 @@ struct flow_control_configuration {
u8 dont_add_pri_0_en;
u8 reserved1;
__le32 reserved2;
u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
};
@ -5260,18 +5372,25 @@ struct function_start_data {
u8 path_id;
u8 network_cos_mode;
u8 dmae_cmd_id;
u8 tunnel_mode;
u8 gre_tunnel_type;
u8 tunn_clss_en;
u8 inner_gre_rss_en;
u8 sd_accept_mf_clss_fail;
u8 no_added_tags;
__le16 reserved0;
__le32 reserved1;
u8 inner_clss_vxlan;
u8 inner_clss_l2gre;
u8 inner_clss_l2geneve;
u8 inner_rss;
__le16 vxlan_dst_port;
__le16 geneve_dst_port;
u8 sd_accept_mf_clss_fail;
u8 sd_accept_mf_clss_fail_match_ethtype;
__le16 sd_accept_mf_clss_fail_ethtype;
__le16 sd_vlan_eth_type;
u8 sd_vlan_force_pri_flg;
u8 sd_vlan_force_pri_val;
u8 sd_accept_mf_clss_fail_match_ethtype;
u8 no_added_tags;
u8 c2s_pri_tt_valid;
u8 c2s_pri_default;
u8 reserved2[6];
struct c2s_pri_trans_table_entry c2s_pri_trans_table;
};
struct function_update_data {
@ -5289,11 +5408,12 @@ struct function_update_data {
u8 tx_switch_suspend;
u8 echo;
u8 update_tunn_cfg_flg;
u8 tunnel_mode;
u8 gre_tunnel_type;
u8 tunn_clss_en;
u8 inner_gre_rss_en;
u8 inner_clss_vxlan;
u8 inner_clss_l2gre;
u8 inner_clss_l2geneve;
u8 inner_rss;
__le16 vxlan_dst_port;
__le16 geneve_dst_port;
u8 sd_vlan_force_pri_change_flg;
u8 sd_vlan_force_pri_flg;
u8 sd_vlan_force_pri_val;
@ -5302,6 +5422,8 @@ struct function_update_data {
u8 reserved1;
__le16 sd_vlan_tag;
__le16 sd_vlan_eth_type;
__le16 reserved0;
__le32 reserved2;
};
/*
@ -5330,15 +5452,6 @@ struct fw_version {
#define __FW_VERSION_RESERVED_SHIFT 4
};
/* GRE Tunnel Mode */
enum gre_tunnel_type {
NVGRE_TUNNEL,
L2GRE_TUNNEL,
IPGRE_TUNNEL,
MAX_GRE_TUNNEL_TYPE
};
/*
* Dynamic Host-Coalescing - Driver(host) counters
*/

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
Просмотреть файл

@ -1,7 +1,9 @@
/* bnx2x_init.h: Broadcom Everest network driver.
/* bnx2x_init.h: Qlogic Everest network driver.
* Structures and macroes needed during the initialization.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
Просмотреть файл

@ -1,8 +1,10 @@
/* bnx2x_init_ops.h: Broadcom Everest network driver.
/* bnx2x_init_ops.h: Qlogic Everest network driver.
* Static functions needed during the initialization.
* This file is "included" in bnx2x_main.c.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

254
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
Просмотреть файл

@ -1,13 +1,15 @@
/* Copyright 2008-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
* at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other Qlogic software provided under a
* license other than the GPL, without Qlogic's express prior written
* consent.
*
* Written by Yaniv Rosner
@ -9652,6 +9654,13 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
/******************************************************************/
/* BCM8481/BCM84823/BCM84833 PHY SECTION */
/******************************************************************/
static int bnx2x_is_8483x_8485x(struct bnx2x_phy *phy)
{
return ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858));
}
static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
struct bnx2x *bp,
u8 port)
@ -9666,8 +9675,7 @@ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
};
u16 fw_ver1;
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
if (bnx2x_is_8483x_8485x(phy)) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1);
bnx2x_save_spirom_version(bp, port, fw_ver1 & 0xfff,
phy->ver_addr);
@ -9749,8 +9757,7 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834))
if (bnx2x_is_8483x_8485x(phy))
offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1;
else
offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1;
@ -9768,8 +9775,7 @@ static void bnx2x_848xx_specific_func(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
switch (action) {
case PHY_INIT:
if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
(phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
if (!bnx2x_is_8483x_8485x(phy)) {
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, bp, params->port);
}
@ -9901,8 +9907,7 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
/* Always write this if this is not 84833/4.
* For 84833/4, write it only when it's a forced speed.
*/
if (((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
(phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) ||
if (!bnx2x_is_8483x_8485x(phy) ||
((autoneg_val & (1<<12)) == 0))
bnx2x_cl45_write(bp, phy,
MDIO_AN_DEVAD,
@ -9949,8 +9954,86 @@ static int bnx2x_8481_config_init(struct bnx2x_phy *phy,
return bnx2x_848xx_cmn_config_init(phy, params, vars);
}
#define PHY84833_CMDHDLR_WAIT 300
#define PHY84833_CMDHDLR_MAX_ARGS 5
#define PHY848xx_CMDHDLR_WAIT 300
#define PHY848xx_CMDHDLR_MAX_ARGS 5
static int bnx2x_84858_cmd_hdlr(struct bnx2x_phy *phy,
struct link_params *params,
u16 fw_cmd,
u16 cmd_args[], int argc)
{
int idx;
u16 val;
struct bnx2x *bp = params->bp;
/* Step 1: Poll the STATUS register to see whether the previous command
* is in progress or the system is busy (CMD_IN_PROGRESS or
* SYSTEM_BUSY). If previous command is in progress or system is busy,
* check again until the previous command finishes execution and the
* system is available for taking command
*/
for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_848xx_CMD_HDLR_STATUS, &val);
if ((val != PHY84858_STATUS_CMD_IN_PROGRESS) &&
(val != PHY84858_STATUS_CMD_SYSTEM_BUSY))
break;
usleep_range(1000, 2000);
}
if (idx >= PHY848xx_CMDHDLR_WAIT) {
DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");
return -EINVAL;
}
/* Step2: If any parameters are required for the function, write them
* to the required DATA registers
*/
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_848xx_CMD_HDLR_DATA1 + idx,
cmd_args[idx]);
}
/* Step3: When the firmware is ready for commands, write the 'Command
* code' to the CMD register
*/
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
/* Step4: Once the command has been written, poll the STATUS register
* to check whether the command has completed (CMD_COMPLETED_PASS/
* CMD_FOR_CMDS or CMD_COMPLETED_ERROR).
*/
for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_848xx_CMD_HDLR_STATUS, &val);
if ((val == PHY84858_STATUS_CMD_COMPLETE_PASS) ||
(val == PHY84858_STATUS_CMD_COMPLETE_ERROR))
break;
usleep_range(1000, 2000);
}
if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
(val == PHY84858_STATUS_CMD_COMPLETE_ERROR)) {
DP(NETIF_MSG_LINK, "FW cmd failed.\n");
return -EINVAL;
}
/* Step5: Once the command has completed, read the specficied DATA
* registers for any saved results for the command, if applicable
*/
/* Gather returning data */
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_848xx_CMD_HDLR_DATA1 + idx,
&cmd_args[idx]);
}
return 0;
}
static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
struct link_params *params, u16 fw_cmd,
u16 cmd_args[], int argc)
@ -9960,16 +10043,16 @@ static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
/* Write CMD_OPEN_OVERRIDE to STATUS reg */
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_STATUS,
MDIO_848xx_CMD_HDLR_STATUS,
PHY84833_STATUS_CMD_OPEN_OVERRIDE);
for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_STATUS, &val);
MDIO_848xx_CMD_HDLR_STATUS, &val);
if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS)
break;
usleep_range(1000, 2000);
}
if (idx >= PHY84833_CMDHDLR_WAIT) {
if (idx >= PHY848xx_CMDHDLR_WAIT) {
DP(NETIF_MSG_LINK, "FW cmd: FW not ready.\n");
return -EINVAL;
}
@ -9977,42 +10060,62 @@ static int bnx2x_84833_cmd_hdlr(struct bnx2x_phy *phy,
/* Prepare argument(s) and issue command */
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_DATA1 + idx,
MDIO_848xx_CMD_HDLR_DATA1 + idx,
cmd_args[idx]);
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_COMMAND, fw_cmd);
for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) {
MDIO_848xx_CMD_HDLR_COMMAND, fw_cmd);
for (idx = 0; idx < PHY848xx_CMDHDLR_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_STATUS, &val);
MDIO_848xx_CMD_HDLR_STATUS, &val);
if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) ||
(val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
(val == PHY84833_STATUS_CMD_COMPLETE_ERROR))
break;
usleep_range(1000, 2000);
}
if ((idx >= PHY84833_CMDHDLR_WAIT) ||
(val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
if ((idx >= PHY848xx_CMDHDLR_WAIT) ||
(val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
DP(NETIF_MSG_LINK, "FW cmd failed.\n");
return -EINVAL;
}
/* Gather returning data */
for (idx = 0; idx < argc; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_DATA1 + idx,
MDIO_848xx_CMD_HDLR_DATA1 + idx,
&cmd_args[idx]);
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_CMD_HDLR_STATUS,
MDIO_848xx_CMD_HDLR_STATUS,
PHY84833_STATUS_CMD_CLEAR_COMPLETE);
return 0;
}
static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
static int bnx2x_848xx_cmd_hdlr(struct bnx2x_phy *phy,
struct link_params *params,
u16 fw_cmd,
u16 cmd_args[], int argc)
{
struct bnx2x *bp = params->bp;
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) ||
(REG_RD(bp, params->shmem2_base +
offsetof(struct shmem2_region,
link_attr_sync[params->port])) &
LINK_ATTR_84858)) {
return bnx2x_84858_cmd_hdlr(phy, params, fw_cmd, cmd_args,
argc);
} else {
return bnx2x_84833_cmd_hdlr(phy, params, fw_cmd, cmd_args,
argc);
}
}
static int bnx2x_848xx_pair_swap_cfg(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
{
u32 pair_swap;
u16 data[PHY84833_CMDHDLR_MAX_ARGS];
u16 data[PHY848xx_CMDHDLR_MAX_ARGS];
int status;
struct bnx2x *bp = params->bp;
@ -10028,8 +10131,9 @@ static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
/* Only the second argument is used for this command */
data[1] = (u16)pair_swap;
status = bnx2x_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_PAIR_SWAP, data, PHY84833_CMDHDLR_MAX_ARGS);
status = bnx2x_848xx_cmd_hdlr(phy, params,
PHY848xx_CMD_SET_PAIR_SWAP, data,
PHY848xx_CMDHDLR_MAX_ARGS);
if (status == 0)
DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data[1]);
@ -10118,8 +10222,8 @@ static int bnx2x_8483x_disable_eee(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Don't Advertise 10GBase-T EEE\n");
/* Prevent Phy from working in EEE and advertising it */
rc = bnx2x_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
rc = bnx2x_848xx_cmd_hdlr(phy, params,
PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc) {
DP(NETIF_MSG_LINK, "EEE disable failed.\n");
return rc;
@ -10136,8 +10240,8 @@ static int bnx2x_8483x_enable_eee(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
u16 cmd_args = 1;
rc = bnx2x_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
rc = bnx2x_848xx_cmd_hdlr(phy, params,
PHY848xx_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc) {
DP(NETIF_MSG_LINK, "EEE enable failed.\n");
return rc;
@ -10155,7 +10259,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
u8 port, initialize = 1;
u16 val;
u32 actual_phy_selection;
u16 cmd_args[PHY84833_CMDHDLR_MAX_ARGS];
u16 cmd_args[PHY848xx_CMDHDLR_MAX_ARGS];
int rc = 0;
usleep_range(1000, 2000);
@ -10180,8 +10284,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* Wait for GPHY to come out of reset */
msleep(50);
if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) &&
(phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
if (!bnx2x_is_8483x_8485x(phy)) {
/* BCM84823 requires that XGXS links up first @ 10G for normal
* behavior.
*/
@ -10192,7 +10295,19 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
bnx2x_program_serdes(&params->phy[INT_PHY], params, vars);
vars->line_speed = temp;
}
/* Check if this is actually BCM84858 */
if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858) {
u16 hw_rev;
bnx2x_cl45_read(bp, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_848xx_ID_MSB, &hw_rev);
if (hw_rev == BCM84858_PHY_ID) {
params->link_attr_sync |= LINK_ATTR_84858;
bnx2x_update_link_attr(params, params->link_attr_sync);
}
}
/* Set dual-media configuration according to configuration */
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA, &val);
val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
@ -10237,18 +10352,17 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
params->multi_phy_config, val);
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
bnx2x_84833_pair_swap_cfg(phy, params, vars);
if (bnx2x_is_8483x_8485x(phy)) {
bnx2x_848xx_pair_swap_cfg(phy, params, vars);
/* Keep AutogrEEEn disabled. */
cmd_args[0] = 0x0;
cmd_args[1] = 0x0;
cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1;
cmd_args[3] = PHY84833_CONSTANT_LATENCY;
rc = bnx2x_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_EEE_MODE, cmd_args,
PHY84833_CMDHDLR_MAX_ARGS);
rc = bnx2x_848xx_cmd_hdlr(phy, params,
PHY848xx_CMD_SET_EEE_MODE, cmd_args,
PHY848xx_CMDHDLR_MAX_ARGS);
if (rc)
DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n");
}
@ -10302,8 +10416,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK;
}
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) {
if (bnx2x_is_8483x_8485x(phy)) {
/* Bring PHY out of super isolate mode as the final step. */
bnx2x_cl45_read_and_write(bp, phy,
MDIO_CTL_DEVAD,
@ -10435,8 +10548,7 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
/* Determine if EEE was negotiated */
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834))
if (bnx2x_is_8483x_8485x(phy))
bnx2x_eee_an_resolve(phy, params, vars);
}
@ -11842,6 +11954,40 @@ static const struct bnx2x_phy phy_84834 = {
.phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func
};
static const struct bnx2x_phy phy_84858 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858,
.addr = 0xff,
.def_md_devad = 0,
.flags = FLAGS_FAN_FAILURE_DET_REQ |
FLAGS_REARM_LATCH_SIGNAL,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
.mdio_ctrl = 0,
.supported = (SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause),
.media_type = ETH_PHY_BASE_T,
.ver_addr = 0,
.req_flow_ctrl = 0,
.req_line_speed = 0,
.speed_cap_mask = 0,
.req_duplex = 0,
.rsrv = 0,
.config_init = (config_init_t)bnx2x_848x3_config_init,
.read_status = (read_status_t)bnx2x_848xx_read_status,
.link_reset = (link_reset_t)bnx2x_848x3_link_reset,
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver,
.hw_reset = (hw_reset_t)bnx2x_84833_hw_reset_phy,
.set_link_led = (set_link_led_t)bnx2x_848xx_set_link_led,
.phy_specific_func = (phy_specific_func_t)bnx2x_848xx_specific_func
};
static const struct bnx2x_phy phy_54618se = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE,
.addr = 0xff,
@ -12128,6 +12274,9 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834:
*phy = phy_84834;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858:
*phy = phy_84858;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54616:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM54618SE:
*phy = phy_54618se;
@ -12184,9 +12333,7 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp,
}
phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port);
if (((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) ||
(phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834)) &&
(phy->ver_addr)) {
if (bnx2x_is_8483x_8485x(phy) && (phy->ver_addr)) {
/* Remove 100Mb link supported for BCM84833/4 when phy fw
* version lower than or equal to 1.39
*/
@ -13281,6 +13428,7 @@ static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[],
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84858:
/* GPIO3's are linked, and so both need to be toggled
* to obtain required 2us pulse.
*/

10
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h
Просмотреть файл

@ -1,13 +1,15 @@
/* Copyright 2008-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
* at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other Qlogic software provided under a
* license other than the GPL, without Qlogic's express prior written
* consent.
*
* Written by Yaniv Rosner

136
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_main.c: Broadcom Everest network driver.
/* bnx2x_main.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -81,11 +83,11 @@
#define TX_TIMEOUT (5*HZ)
static char version[] =
"Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver "
"QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("Eliezer Tamir");
MODULE_DESCRIPTION("Broadcom NetXtreme II "
MODULE_DESCRIPTION("QLogic "
"BCM57710/57711/57711E/"
"57712/57712_MF/57800/57800_MF/57810/57810_MF/"
"57840/57840_MF Driver");
@ -163,27 +165,27 @@ enum bnx2x_board_type {
static struct {
char *name;
} board_info[] = {
[BCM57710] = { "Broadcom NetXtreme II BCM57710 10 Gigabit PCIe [Everest]" },
[BCM57711] = { "Broadcom NetXtreme II BCM57711 10 Gigabit PCIe" },
[BCM57711E] = { "Broadcom NetXtreme II BCM57711E 10 Gigabit PCIe" },
[BCM57712] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet" },
[BCM57712_MF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Multi Function" },
[BCM57712_VF] = { "Broadcom NetXtreme II BCM57712 10 Gigabit Ethernet Virtual Function" },
[BCM57800] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet" },
[BCM57800_MF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Multi Function" },
[BCM57800_VF] = { "Broadcom NetXtreme II BCM57800 10 Gigabit Ethernet Virtual Function" },
[BCM57810] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet" },
[BCM57810_MF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Multi Function" },
[BCM57810_VF] = { "Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet Virtual Function" },
[BCM57840_4_10] = { "Broadcom NetXtreme II BCM57840 10 Gigabit Ethernet" },
[BCM57840_2_20] = { "Broadcom NetXtreme II BCM57840 20 Gigabit Ethernet" },
[BCM57840_MF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
[BCM57840_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" },
[BCM57811] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet" },
[BCM57811_MF] = { "Broadcom NetXtreme II BCM57811 10 Gigabit Ethernet Multi Function" },
[BCM57840_O] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet" },
[BCM57840_MFO] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Multi Function" },
[BCM57811_VF] = { "Broadcom NetXtreme II BCM57840 10/20 Gigabit Ethernet Virtual Function" }
[BCM57710] = { "QLogic BCM57710 10 Gigabit PCIe [Everest]" },
[BCM57711] = { "QLogic BCM57711 10 Gigabit PCIe" },
[BCM57711E] = { "QLogic BCM57711E 10 Gigabit PCIe" },
[BCM57712] = { "QLogic BCM57712 10 Gigabit Ethernet" },
[BCM57712_MF] = { "QLogic BCM57712 10 Gigabit Ethernet Multi Function" },
[BCM57712_VF] = { "QLogic BCM57712 10 Gigabit Ethernet Virtual Function" },
[BCM57800] = { "QLogic BCM57800 10 Gigabit Ethernet" },
[BCM57800_MF] = { "QLogic BCM57800 10 Gigabit Ethernet Multi Function" },
[BCM57800_VF] = { "QLogic BCM57800 10 Gigabit Ethernet Virtual Function" },
[BCM57810] = { "QLogic BCM57810 10 Gigabit Ethernet" },
[BCM57810_MF] = { "QLogic BCM57810 10 Gigabit Ethernet Multi Function" },
[BCM57810_VF] = { "QLogic BCM57810 10 Gigabit Ethernet Virtual Function" },
[BCM57840_4_10] = { "QLogic BCM57840 10 Gigabit Ethernet" },
[BCM57840_2_20] = { "QLogic BCM57840 20 Gigabit Ethernet" },
[BCM57840_MF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
[BCM57840_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" },
[BCM57811] = { "QLogic BCM57811 10 Gigabit Ethernet" },
[BCM57811_MF] = { "QLogic BCM57811 10 Gigabit Ethernet Multi Function" },
[BCM57840_O] = { "QLogic BCM57840 10/20 Gigabit Ethernet" },
[BCM57840_MFO] = { "QLogic BCM57840 10/20 Gigabit Ethernet Multi Function" },
[BCM57811_VF] = { "QLogic BCM57840 10/20 Gigabit Ethernet Virtual Function" }
};
#ifndef PCI_DEVICE_ID_NX2_57710
@ -2916,7 +2918,7 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
func_params.f_obj = &bp->func_obj;
func_params.cmd = BNX2X_F_CMD_SWITCH_UPDATE;
if (IS_MF_UFP(bp)) {
if (IS_MF_UFP(bp) || IS_MF_BD(bp)) {
int func = BP_ABS_FUNC(bp);
u32 val;
@ -2943,16 +2945,16 @@ static void bnx2x_handle_update_svid_cmd(struct bnx2x *bp)
BNX2X_ERR("Failed to configure FW of S-tag Change to %02x\n",
bp->mf_ov);
goto fail;
} else {
DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n",
bp->mf_ov);
}
DP(BNX2X_MSG_MCP, "Configured S-tag %02x\n", bp->mf_ov);
bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
return;
} else {
goto fail;
}
/* not supported by SW yet */
bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_OK, 0);
return;
fail:
bnx2x_fw_command(bp, DRV_MSG_CODE_OEM_UPDATE_SVID_FAILURE, 0);
}
@ -3707,6 +3709,34 @@ out:
ethver, iscsiver, fcoever);
}
void bnx2x_update_mfw_dump(struct bnx2x *bp)
{
struct timeval epoc;
u32 drv_ver;
u32 valid_dump;
if (!SHMEM2_HAS(bp, drv_info))
return;
/* Update Driver load time */
do_gettimeofday(&epoc);
SHMEM2_WR(bp, drv_info.epoc, epoc.tv_sec);
drv_ver = bnx2x_update_mng_version_utility(DRV_MODULE_VERSION, true);
SHMEM2_WR(bp, drv_info.drv_ver, drv_ver);
SHMEM2_WR(bp, drv_info.fw_ver, REG_RD(bp, XSEM_REG_PRAM));
/* Check & notify On-Chip dump. */
valid_dump = SHMEM2_RD(bp, drv_info.valid_dump);
if (valid_dump & FIRST_DUMP_VALID)
DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 1st partition\n");
if (valid_dump & SECOND_DUMP_VALID)
DP(NETIF_MSG_IFUP, "A valid On-Chip MFW dump found on 2nd partition\n");
}
static void bnx2x_oem_event(struct bnx2x *bp, u32 event)
{
u32 cmd_ok, cmd_fail;
@ -5568,6 +5598,8 @@ static void bnx2x_eq_int(struct bnx2x *bp)
BNX2X_STATE_OPEN):
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
BNX2X_STATE_OPENING_WAIT4_PORT):
case (EVENT_RING_OPCODE_RSS_UPDATE_RULES |
BNX2X_STATE_CLOSING_WAIT4_HALT):
cid = elem->message.data.eth_event.echo &
BNX2X_SWCID_MASK;
DP(BNX2X_MSG_SP, "got RSS_UPDATE ramrod. CID %d\n",
@ -7429,6 +7461,9 @@ static int bnx2x_init_hw_common(struct bnx2x *bp)
} else
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
if (SHMEM2_HAS(bp, netproc_fw_ver))
SHMEM2_WR(bp, netproc_fw_ver, REG_RD(bp, XSEM_REG_PRAM));
return 0;
}
@ -11678,7 +11713,7 @@ static void validate_set_si_mode(struct bnx2x *bp)
static int bnx2x_get_hwinfo(struct bnx2x *bp)
{
int /*abs*/func = BP_ABS_FUNC(bp);
int vn;
int vn, mfw_vn;
u32 val = 0, val2 = 0;
int rc = 0;
@ -11768,6 +11803,7 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
bp->mf_mode = 0;
bp->mf_sub_mode = 0;
vn = BP_VN(bp);
mfw_vn = BP_FW_MB_IDX(bp);
if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
@ -11824,6 +11860,31 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
} else
BNX2X_DEV_INFO("illegal OV for SD\n");
break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_BD_MODE:
bp->mf_mode = MULTI_FUNCTION_SD;
bp->mf_sub_mode = SUB_MF_MODE_BD;
bp->mf_config[vn] =
MF_CFG_RD(bp,
func_mf_config[func].config);
if (SHMEM2_HAS(bp, mtu_size)) {
int mtu_idx = BP_FW_MB_IDX(bp);
u16 mtu_size;
u32 mtu;
mtu = SHMEM2_RD(bp, mtu_size[mtu_idx]);
mtu_size = (u16)mtu;
DP(NETIF_MSG_IFUP, "Read MTU size %04x [%08x]\n",
mtu_size, mtu);
/* if valid: update device mtu */
if (((mtu_size + ETH_HLEN) >=
ETH_MIN_PACKET_SIZE) &&
(mtu_size <=
ETH_MAX_JUMBO_PACKET_SIZE))
bp->dev->mtu = mtu_size;
}
break;
case SHARED_FEAT_CFG_FORCE_SF_MODE_UFP_MODE:
bp->mf_mode = MULTI_FUNCTION_SD;
bp->mf_sub_mode = SUB_MF_MODE_UFP;
@ -11871,9 +11932,10 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
BNX2X_DEV_INFO("MF OV for func %d is %d (0x%04x)\n",
func, bp->mf_ov, bp->mf_ov);
} else if (bp->mf_sub_mode == SUB_MF_MODE_UFP) {
} else if ((bp->mf_sub_mode == SUB_MF_MODE_UFP) ||
(bp->mf_sub_mode == SUB_MF_MODE_BD)) {
dev_err(&bp->pdev->dev,
"Unexpected - no valid MF OV for func %d in UFP mode\n",
"Unexpected - no valid MF OV for func %d in UFP/BD mode\n",
func);
bp->path_has_ovlan = true;
} else {
@ -13561,6 +13623,9 @@ static int bnx2x_init_one(struct pci_dev *pdev,
bnx2x_register_phc(bp);
if (!IS_MF_SD_STORAGE_PERSONALITY_ONLY(bp))
bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_DISABLED);
return 0;
init_one_exit:
@ -13623,6 +13688,7 @@ static void __bnx2x_remove(struct pci_dev *pdev,
/* Power on: we can't let PCI layer write to us while we are in D3 */
if (IS_PF(bp)) {
bnx2x_set_power_state(bp, PCI_D0);
bnx2x_set_os_driver_state(bp, OS_DRIVER_STATE_NOT_LOADED);
/* Set endianity registers to reset values in case next driver
* boots in different endianty environment.

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_mfw_req.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_mfw_req.h: Broadcom Everest network driver.
/* bnx2x_mfw_req.h: Qlogic Everest network driver.
*
* Copyright (c) 2012-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

79
drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_reg.h: Broadcom Everest network driver.
/* bnx2x_reg.h: Qlogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -2137,6 +2139,10 @@
/* [RW 1] When this bit is set; the LLH will expect all packets to be with
e1hov */
#define NIG_REG_LLH_E1HOV_MODE 0x160d8
/* [RW 16] Outer VLAN type identifier for multi-function mode. In non
* multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
*/
#define NIG_REG_LLH_E1HOV_TYPE_1 0x16028
/* [RW 1] When this bit is set; the LLH will classify the packet before
sending it to the BRB or calculating WoL on it. */
#define NIG_REG_LLH_MF_MODE 0x16024
@ -2953,7 +2959,12 @@
#define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac
/* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
#define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0
#define PB_REG_CONTROL 0
/* [RW 16] One of 8 values that should be compared to type in Ethernet
* parsing. If there is a match; the field after Ethernet is the first VLAN.
* Reset value is 0x8100 which is the standard VLAN type. Note that when
* checking second VLAN; type is compared only to 0x8100.
*/
#define PBF_REG_VLAN_TYPE_0 0x15c06c
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
/* [R 2] Interrupt register #0 read */
@ -3372,6 +3383,12 @@
#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
/* [R 8] debug only: TSDM current credit. Transaction based. */
#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
/* [RW 16] One of 8 values that should be compared to type in Ethernet
* parsing. If there is a match; the field after Ethernet is the first VLAN.
* Reset value is 0x8100 which is the standard VLAN type. Note that when
* checking second VLAN; type is compared only to 0x8100.
*/
#define PRS_REG_VLAN_TYPE_0 0x401a8
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20)
#define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22)
@ -7240,6 +7257,9 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
#define MDIO_AN_REG_848xx_ID_MSB 0xffe2
#define BCM84858_PHY_ID 0x600d
#define MDIO_AN_REG_848xx_ID_LSB 0xffe3
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
@ -7283,31 +7303,31 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
#define MDIO_84833_SUPER_ISOLATE 0x8000
/* These are mailbox register set used by 84833. */
#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005
#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006
#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037
#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038
#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039
#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a
#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b
#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c
#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0
#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26
#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27
#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28
#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29
#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30
#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31
/* These are mailbox register set used by 84833/84858. */
#define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005
#define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006
#define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007
#define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008
#define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009
#define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037
#define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038
#define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039
#define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a
#define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b
#define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c
#define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
#define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
#define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
#define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
#define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
#define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
#define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31)
/* Mailbox command set used by 84833. */
#define PHY84833_CMD_SET_PAIR_SWAP 0x8001
#define PHY84833_CMD_GET_EEE_MODE 0x8008
#define PHY84833_CMD_SET_EEE_MODE 0x8009
/* Mailbox status set used by 84833. */
/* Mailbox command set used by 84833/84858 */
#define PHY848xx_CMD_SET_PAIR_SWAP 0x8001
#define PHY848xx_CMD_GET_EEE_MODE 0x8008
#define PHY848xx_CMD_SET_EEE_MODE 0x8009
/* Mailbox status set used by 84833 only */
#define PHY84833_STATUS_CMD_RECEIVED 0x0001
#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
@ -7318,6 +7338,13 @@ Theotherbitsarereservedandshouldbezero*/
#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
/* Mailbox status set used by 84858 only */
#define PHY84858_STATUS_CMD_RECEIVED 0x0001
#define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002
#define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004
#define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008
#define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb
/* Warpcore clause 45 addressing */
#define MDIO_WC_DEVAD 0x3

67
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_sp.c: Broadcom Everest network driver.
/* bnx2x_sp.c: Qlogic Everest network driver.
*
* Copyright (c) 2011-2013 Broadcom Corporation
* Copyright 2011-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
* at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other Qlogic software provided under a
* license other than the GPL, without Qlogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@ -4060,8 +4062,14 @@ static int bnx2x_setup_rss(struct bnx2x *bp,
if (test_bit(BNX2X_RSS_IPV6_UDP, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_UDP_CAPABILITY;
if (test_bit(BNX2X_RSS_GRE_INNER_HDRS, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_GRE_INNER_HDRS_CAPABILITY;
if (test_bit(BNX2X_RSS_IPV4_VXLAN, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV4_VXLAN_CAPABILITY;
if (test_bit(BNX2X_RSS_IPV6_VXLAN, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_IPV6_VXLAN_CAPABILITY;
if (test_bit(BNX2X_RSS_TUNN_INNER_HDRS, &p->rss_flags))
caps |= ETH_RSS_UPDATE_RAMROD_DATA_TUNN_INNER_HDRS_CAPABILITY;
/* RSS keys */
if (test_bit(BNX2X_RSS_SET_SRCH, &p->rss_flags)) {
@ -5669,10 +5677,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
rdata->sd_vlan_tag = cpu_to_le16(start_params->sd_vlan_tag);
rdata->path_id = BP_PATH(bp);
rdata->network_cos_mode = start_params->network_cos_mode;
rdata->tunnel_mode = start_params->tunnel_mode;
rdata->gre_tunnel_type = start_params->gre_tunnel_type;
rdata->inner_gre_rss_en = start_params->inner_gre_rss_en;
rdata->vxlan_dst_port = cpu_to_le16(4789);
rdata->vxlan_dst_port = cpu_to_le16(start_params->vxlan_dst_port);
rdata->geneve_dst_port = cpu_to_le16(start_params->geneve_dst_port);
rdata->inner_clss_l2gre = start_params->inner_clss_l2gre;
rdata->inner_clss_l2geneve = start_params->inner_clss_l2geneve;
rdata->inner_clss_vxlan = start_params->inner_clss_vxlan;
rdata->inner_rss = start_params->inner_rss;
rdata->sd_accept_mf_clss_fail = start_params->class_fail;
if (start_params->class_fail_ethtype) {
rdata->sd_accept_mf_clss_fail_match_ethtype = 1;
@ -5690,6 +5702,14 @@ static inline int bnx2x_func_send_start(struct bnx2x *bp,
cpu_to_le16(0x8100);
rdata->no_added_tags = start_params->no_added_tags;
rdata->c2s_pri_tt_valid = start_params->c2s_pri_valid;
if (rdata->c2s_pri_tt_valid) {
memcpy(rdata->c2s_pri_trans_table.val,
start_params->c2s_pri,
MAX_VLAN_PRIORITIES);
rdata->c2s_pri_default = start_params->c2s_pri_default;
}
/* No need for an explicit memory barrier here as long we would
* need to ensure the ordering of writing to the SPQ element
* and updating of the SPQ producer which involves a memory
@ -5750,15 +5770,22 @@ static inline int bnx2x_func_send_switch_update(struct bnx2x *bp,
if (test_bit(BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
&switch_update_params->changes)) {
rdata->update_tunn_cfg_flg = 1;
if (test_bit(BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
&switch_update_params->changes))
rdata->tunn_clss_en = 1;
if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
rdata->inner_clss_l2gre = 1;
if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
&switch_update_params->changes))
rdata->inner_gre_rss_en = 1;
rdata->tunnel_mode = switch_update_params->tunnel_mode;
rdata->gre_tunnel_type = switch_update_params->gre_tunnel_type;
rdata->vxlan_dst_port = cpu_to_le16(4789);
rdata->inner_clss_vxlan = 1;
if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
&switch_update_params->changes))
rdata->inner_clss_l2geneve = 1;
if (test_bit(BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
&switch_update_params->changes))
rdata->inner_rss = 1;
rdata->vxlan_dst_port =
cpu_to_le16(switch_update_params->vxlan_dst_port);
rdata->geneve_dst_port =
cpu_to_le16(switch_update_params->geneve_dst_port);
}
rdata->echo = SWITCH_UPDATE;
@ -5885,6 +5912,8 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp,
rdata->traffic_type_to_priority_cos[i] =
tx_start_params->traffic_type_to_priority_cos[i];
for (i = 0; i < MAX_TRAFFIC_TYPES; i++)
rdata->dcb_outer_pri[i] = tx_start_params->dcb_outer_pri[i];
/* No need for an explicit memory barrier here as long as we
* ensure the ordering of writing to the SPQ element
* and updating of the SPQ producer which involves a memory

59
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_sp.h: Broadcom Everest network driver.
/* bnx2x_sp.h: Qlogic Everest network driver.
*
* Copyright (c) 2011-2013 Broadcom Corporation
* Copyright 2011-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
* at http://www.gnu.org/licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other Qlogic software provided under a
* license other than the GPL, without Qlogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@ -711,7 +713,10 @@ enum {
BNX2X_RSS_IPV6,
BNX2X_RSS_IPV6_TCP,
BNX2X_RSS_IPV6_UDP,
BNX2X_RSS_GRE_INNER_HDRS,
BNX2X_RSS_IPV4_VXLAN,
BNX2X_RSS_IPV6_VXLAN,
BNX2X_RSS_TUNN_INNER_HDRS,
};
struct bnx2x_config_rss_params {
@ -1105,8 +1110,10 @@ enum {
BNX2X_F_UPDATE_VLAN_FORCE_PRIO_CHNG,
BNX2X_F_UPDATE_VLAN_FORCE_PRIO_FLAG,
BNX2X_F_UPDATE_TUNNEL_CFG_CHNG,
BNX2X_F_UPDATE_TUNNEL_CLSS_EN,
BNX2X_F_UPDATE_TUNNEL_INNER_GRE_RSS_EN,
BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GRE,
BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_VXLAN,
BNX2X_F_UPDATE_TUNNEL_INNER_CLSS_L2GENEVE,
BNX2X_F_UPDATE_TUNNEL_INNER_RSS,
};
/* Allowed Function states */
@ -1171,19 +1178,23 @@ struct bnx2x_func_start_params {
/* Function cos mode */
u8 network_cos_mode;
/* TUNN_MODE_NONE/TUNN_MODE_VXLAN/TUNN_MODE_GRE */
u8 tunnel_mode;
/* UDP dest port for VXLAN */
u16 vxlan_dst_port;
/* tunneling classification enablement */
u8 tunn_clss_en;
/* UDP dest port for Geneve */
u16 geneve_dst_port;
/* NVGRE_TUNNEL/L2GRE_TUNNEL/IPGRE_TUNNEL */
u8 gre_tunnel_type;
/* Enable inner Rx classifications for L2GRE packets */
u8 inner_clss_l2gre;
/* Enables Inner GRE RSS on the function, depends on the client RSS
* capailities
*/
u8 inner_gre_rss_en;
/* Enable inner Rx classifications for L2-Geneve packets */
u8 inner_clss_l2geneve;
/* Enable inner Rx classification for vxlan packets */
u8 inner_clss_vxlan;
/* Enable RSS according to inner header */
u8 inner_rss;
/* Allows accepting of packets failing MF classification, possibly
* only matching a given ethertype
@ -1200,6 +1211,11 @@ struct bnx2x_func_start_params {
/* Prevent inner vlans from being added by FW */
u8 no_added_tags;
/* Inner-to-Outer vlan priority mapping */
u8 c2s_pri[MAX_VLAN_PRIORITIES];
u8 c2s_pri_default;
u8 c2s_pri_valid;
};
struct bnx2x_func_switch_update_params {
@ -1207,8 +1223,8 @@ struct bnx2x_func_switch_update_params {
u16 vlan;
u16 vlan_eth_type;
u8 vlan_force_prio;
u8 tunnel_mode;
u8 gre_tunnel_type;
u16 vxlan_dst_port;
u16 geneve_dst_port;
};
struct bnx2x_func_afex_update_params {
@ -1229,6 +1245,7 @@ struct bnx2x_func_tx_start_params {
u8 dcb_enabled;
u8 dcb_version;
u8 dont_add_pri_0_en;
u8 dcb_outer_pri[MAX_TRAFFIC_TYPES];
};
struct bnx2x_func_set_timesync_params {

13
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_sriov.c: Broadcom Everest network driver.
/* bnx2x_sriov.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
* Copyright 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
@ -1338,6 +1340,9 @@ int bnx2x_iov_init_one(struct bnx2x *bp, int int_mode_param,
mutex_init(&bp->vfdb->bulletin_mutex);
if (SHMEM2_HAS(bp, sriov_switch_mode))
SHMEM2_WR(bp, sriov_switch_mode, SRIOV_SWITCH_MODE_VEB);
return 0;
failed:
DP(BNX2X_MSG_IOV, "Failed err=%d\n", err);

10
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_sriov.h: Broadcom Everest network driver.
/* bnx2x_sriov.h: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
* Copyright 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_stats.c: Broadcom Everest network driver.
/* bnx2x_stats.c: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

4
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
Просмотреть файл

@ -1,6 +1,8 @@
/* bnx2x_stats.h: Broadcom Everest network driver.
/* bnx2x_stats.h: QLogic Everest network driver.
*
* Copyright (c) 2007-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by

10
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
Просмотреть файл

@ -1,15 +1,17 @@
/* bnx2x_vfpf.c: Broadcom Everest network driver.
/* bnx2x_vfpf.c: QLogic Everest network driver.
*
* Copyright 2009-2013 Broadcom Corporation
* Copyright 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and QLogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* software in any way with any other QLogic software provided under a
* license other than the GPL, without QLogic's express prior written
* consent.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>

22
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h
Просмотреть файл

@ -1,16 +1,22 @@
/* bnx2x_vfpf.h: Broadcom Everest network driver.
/* bnx2x_vfpf.h: Qlogic Everest network driver.
*
* Copyright (c) 2011-2013 Broadcom Corporation
* Copyright (c) 2014 QLogic Corporation
* All rights reserved
*
* Unless you and Broadcom execute a separate written software license
* Unless you and Qlogic execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available
* at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
* under the terms of the GNU General Public License version 2 (the “GPL”),
* available at http://www.gnu.org/licenses/gpl-2.0.html, with the following
* added to such license:
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions
* of the license of that module. An independent module is a module which is
* not derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Maintained by: Ariel Elior <ariel.elior@qlogic.com>
* Written by: Ariel Elior <ariel.elior@qlogic.com>