microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge commit 'v3.2-rc4' into core/locking 

Merge reason: Pick up post-rc1 fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2011-12-06 08:11:27 +01:00
Родитель 87cdee7116 5611cc4572
Коммит 7119a341f3
709 изменённых файлов: 7338 добавлений и 5166 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

13
Documentation/ABI/testing/sysfs-block
Просмотреть файл

@ -206,16 +206,3 @@ Description:
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
What: /sys/block/<disk>/alias
Date: Aug 2011
Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Description:
A raw device name of a disk does not always point a same disk
each boot-up time. Therefore, users have to use persistent
device names, which udev creates when the kernel finds a disk,
instead of raw device name. However, kernel doesn't show those
persistent names on its messages (e.g. dmesg).
This file can store an alias of the disk and it would be
appeared in kernel messages if it is set. A disk can have an
alias which length is up to 255bytes. Users can use alphabets,
numbers, "-" and "_" in alias name. This file is writeonce.

7
Documentation/DocBook/uio-howto.tmpl
Просмотреть файл

@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
</para>
<itemizedlist>
<listitem><para>
<varname>const char *name</varname>: Optional. Set this to help identify
the memory region, it will show up in the corresponding sysfs node.
</para></listitem>
<listitem><para>
<varname>int memtype</varname>: Required if the mapping is used. Set this to
<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@ -553,7 +558,7 @@ instead to remember such an address.
</itemizedlist>
<para>
Please do not touch the <varname>kobj</varname> element of
Please do not touch the <varname>map</varname> element of
<varname>struct uio_mem</varname>! It is used by the UIO framework
to set up sysfs files for this mapping. Simply leave it alone.
</para>

14
Documentation/blockdev/cciss.txt
Просмотреть файл

@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
Additionally, note that the driver will not engage the SCSI core at init
time. The driver must be directed to dynamically engage the SCSI core via
the /proc filesystem entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is because at driver init time,
the SCSI core may not yet be initialized (because the driver is a block
driver) and attempting to register it with the SCSI core in such a case
would cause a hang. This is best done via an initialization script
(typically in /etc/init.d, but could vary depending on distribution).
Additionally, note that the driver will engage the SCSI core at init
time if any tape drives or medium changers are detected. The driver may
also be directed to dynamically engage the SCSI core via the /proc filesystem
entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is best done via a script.
For example:
for x in /proc/driver/cciss/cciss[0-9]*

1
Documentation/devicetree/bindings/vendor-prefixes.txt
Просмотреть файл

@ -33,6 +33,7 @@ qcom Qualcomm, Inc.
ramtron Ramtron International
samsung Samsung Semiconductor
schindler Schindler
sil Silicon Image
simtek
sirf SiRF Technology, Inc.
stericsson ST-Ericsson

4
Documentation/filesystems/btrfs.txt
Просмотреть файл

@ -63,8 +63,8 @@ IRC network.
Userspace tools for creating and manipulating Btrfs file systems are
available from the git repository at the following location:
http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
These include the following tools:

36
Documentation/i2c/ten-bit-addresses
Просмотреть файл

@ -1,22 +1,24 @@
The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
address 0x10 (though a single device could respond to both of them).
WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
I2C messages to and from 10-bit address devices have a different format.
See the I2C specification for the details.
As soon as a real 10 bit address device is spotted 'in the wild', we
can and will add proper support. Right now, 10 bit address devices
are defined by the I2C protocol, but we have never seen a single device
which supports them.
The current 10 bit address support is minimal. It should work, however
you can expect some problems along the way:
* Not all bus drivers support 10-bit addresses. Some don't because the
hardware doesn't support them (SMBus doesn't require 10-bit address
support for example), some don't because nobody bothered adding the
code (or it's there but not working properly.) Software implementation
(i2c-algo-bit) is known to work.
* Some optional features do not support 10-bit addresses. This is the
case of automatic detection and instantiation of devices by their,
drivers, for example.
* Many user-space packages (for example i2c-tools) lack support for
10-bit addresses.
Note that 10-bit address devices are still pretty rare, so the limitations
listed above could stay for a long time, maybe even forever if nobody
needs them to be fixed.

2
Documentation/networking/ip-sysctl.txt
Просмотреть файл

@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
default FALSE
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
default 552 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase

105
Documentation/power/devices.txt
Просмотреть файл

@ -123,9 +123,10 @@ please refer directly to the source code for more information about it.
Subsystem-Level Methods
-----------------------
The core methods to suspend and resume devices reside in struct dev_pm_ops
pointed to by the pm member of struct bus_type, struct device_type and
struct class. They are mostly of interest to the people writing infrastructure
for buses, like PCI or USB, or device type and device class drivers.
pointed to by the ops member of struct dev_pm_domain, or by the pm member of
struct bus_type, struct device_type and struct class. They are mostly of
interest to the people writing infrastructure for platforms and buses, like PCI
or USB, or device type and device class drivers.
Bus drivers implement these methods as appropriate for the hardware and the
drivers using it; PCI works differently from USB, and so on. Not many people
@ -139,41 +140,57 @@ sequencing in the driver model tree.
/sys/devices/.../power/wakeup files
-----------------------------------
All devices in the driver model have two flags to control handling of wakeup
events (hardware signals that can force the device and/or system out of a low
power state). These flags are initialized by bus or device driver code using
All device objects in the driver model contain fields that control the handling
of system wakeup events (hardware signals that can force the system out of a
sleep state). These fields are initialized by bus or device driver code using
device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
include/linux/pm_wakeup.h.
The "can_wakeup" flag just records whether the device (and its driver) can
The "power.can_wakeup" flag just records whether the device (and its driver) can
physically support wakeup events. The device_set_wakeup_capable() routine
affects this flag. The "should_wakeup" flag controls whether the device should
try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag;
for the most part drivers should not change its value. The initial value of
should_wakeup is supposed to be false for the majority of devices; the major
exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
(wake-on-LAN) feature has been set up with ethtool. It should also default
to true for devices that don't generate wakeup requests on their own but merely
forward wakeup requests from one bus to another (like PCI bridges).
affects this flag. The "power.wakeup" field is a pointer to an object of type
struct wakeup_source used for controlling whether or not the device should use
its system wakeup mechanism and for notifying the PM core of system wakeup
events signaled by the device. This object is only present for wakeup-capable
devices (i.e. devices whose "can_wakeup" flags are set) and is created (or
removed) by device_set_wakeup_capable().
Whether or not a device is capable of issuing wakeup events is a hardware
matter, and the kernel is responsible for keeping track of it. By contrast,
whether or not a wakeup-capable device should issue wakeup events is a policy
decision, and it is managed by user space through a sysfs attribute: the
power/wakeup file. User space can write the strings "enabled" or "disabled" to
set or clear the "should_wakeup" flag, respectively. This file is only present
for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
and is created (or removed) by device_set_wakeup_capable(). Reads from the
file will return the corresponding string.
"power/wakeup" file. User space can write the strings "enabled" or "disabled"
to it to indicate whether or not, respectively, the device is supposed to signal
system wakeup. This file is only present if the "power.wakeup" object exists
for the given device and is created (or removed) along with that object, by
device_set_wakeup_capable(). Reads from the file will return the corresponding
string.
The device_may_wakeup() routine returns true only if both flags are set.
The "power/wakeup" file is supposed to contain the "disabled" string initially
for the majority of devices; the major exceptions are power buttons, keyboards,
and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with
ethtool. It should also default to "enabled" for devices that don't generate
wakeup requests on their own but merely forward wakeup requests from one bus to
another (like PCI Express ports).
The device_may_wakeup() routine returns true only if the "power.wakeup" object
exists and the corresponding "power/wakeup" file contains the string "enabled".
This information is used by subsystems, like the PCI bus type code, to see
whether or not to enable the devices' wakeup mechanisms. If device wakeup
mechanisms are enabled or disabled directly by drivers, they also should use
device_may_wakeup() to decide what to do during a system sleep transition.
However for runtime power management, wakeup events should be enabled whenever
the device and driver both support them, regardless of the should_wakeup flag.
Device drivers, however, are not supposed to call device_set_wakeup_enable()
directly in any case.
It ought to be noted that system wakeup is conceptually different from "remote
wakeup" used by runtime power management, although it may be supported by the
same physical mechanism. Remote wakeup is a feature allowing devices in
low-power states to trigger specific interrupts to signal conditions in which
they should be put into the full-power state. Those interrupts may or may not
be used to signal system wakeup events, depending on the hardware design. On
some systems it is impossible to trigger them from system sleep states. In any
case, remote wakeup should always be enabled for runtime power management for
all devices and drivers that support it.
/sys/devices/.../power/control files
------------------------------------
@ -249,20 +266,31 @@ for every device before the next phase begins. Not all busses or classes
support all these callbacks and not all drivers use all the callbacks. The
various phases always run after tasks have been frozen and before they are
unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have
been disabled (except for those marked with the IRQ_WAKEUP flag).
been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
All phases use bus, type, or class callbacks (that is, methods defined in
dev->bus->pm, dev->type->pm, or dev->class->pm). These callbacks are mutually
exclusive, so if the device type provides a struct dev_pm_ops object pointed to
by its pm field (i.e. both dev->type and dev->type->pm are defined), the
callbacks included in that object (i.e. dev->type->pm) will be used. Otherwise,
if the class provides a struct dev_pm_ops object pointed to by its pm field
(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
callbacks from that object (i.e. dev->class->pm). Finally, if the pm fields of
both the device type and class objects are NULL (or those objects do not exist),
the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
will be used (this allows device types to override callbacks provided by bus
types or classes if necessary).
All phases use PM domain, bus, type, or class callbacks (that is, methods
defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
These callbacks are regarded by the PM core as mutually exclusive. Moreover,
PM domain callbacks always take precedence over bus, type and class callbacks,
while type callbacks take precedence over bus and class callbacks, and class
callbacks take precedence over bus callbacks. To be precise, the following
rules are used to determine which callback to execute in the given phase:
1. If dev->pm_domain is present, the PM core will attempt to execute the
callback included in dev->pm_domain->ops. If that callback is not
present, no action will be carried out for the given device.
2. Otherwise, if both dev->type and dev->type->pm are present, the callback
included in dev->type->pm will be executed.
3. Otherwise, if both dev->class and dev->class->pm are present, the
callback included in dev->class->pm will be executed.
4. Otherwise, if both dev->bus and dev->bus->pm are present, the callback
included in dev->bus->pm will be executed.
This allows PM domains and device types to override callbacks provided by bus
types or device classes if necessary.
These callbacks may in turn invoke device- or driver-specific methods stored in
dev->driver->pm, but they don't have to.
@ -283,9 +311,8 @@ When the system goes into the standby or memory sleep state, the phases are:
After the prepare callback method returns, no new children may be
registered below the device. The method may also prepare the device or
driver in some way for the upcoming system power transition (for
example, by allocating additional memory required for this purpose), but
it should not put the device into a low-power state.
driver in some way for the upcoming system power transition, but it
should not put the device into a low-power state.
2. The suspend methods should quiesce the device to stop it from performing
I/O. They also may save the device registers and put it into the

40
Documentation/power/runtime_pm.txt
Просмотреть файл

@ -44,25 +44,33 @@ struct dev_pm_ops {
};
The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
are executed by the PM core for either the power domain, or the device type
(if the device power domain's struct dev_pm_ops does not exist), or the class
(if the device power domain's and type's struct dev_pm_ops object does not
exist), or the bus type (if the device power domain's, type's and class'
struct dev_pm_ops objects do not exist) of the given device, so the priority
order of callbacks from high to low is that power domain callbacks, device
type callbacks, class callbacks and bus type callbacks, and the high priority
one will take precedence over low priority one. The bus type, device type and
class callbacks are referred to as subsystem-level callbacks in what follows,
and generally speaking, the power domain callbacks are used for representing
power domains within a SoC.
are executed by the PM core for the device's subsystem that may be either of
the following:
1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
is present.
2. Device type of the device, if both dev->type and dev->type->pm are present.
3. Device class of the device, if both dev->class and dev->class->pm are
present.
4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
The PM core always checks which callback to use in the order given above, so the
priority order of callbacks from high to low is: PM domain, device type, class
and bus type. Moreover, the high-priority one will always take precedence over
a low-priority one. The PM domain, bus type, device type and class callbacks
are referred to as subsystem-level callbacks in what follows.
By default, the callbacks are always invoked in process context with interrupts
enabled. However, subsystems can use the pm_runtime_irq_safe() helper function
to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
callbacks should be invoked in atomic context with interrupts disabled.
This implies that these callback routines must not block or sleep, but it also
means that the synchronous helper functions listed at the end of Section 4 can
be used within an interrupt handler or in an atomic context.
to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
->runtime_idle() callbacks may be invoked in atomic context with interrupts
disabled for a given device. This implies that the callback routines in
question must not block or sleep, but it also means that the synchronous helper
functions listed at the end of Section 4 may be used for that device within an
interrupt handler or generally in an atomic context.
The subsystem-level suspend callback is _entirely_ _responsible_ for handling
the suspend of the device as appropriate, which may, but need not include

14
Documentation/serial/serial-rs485.txt
Просмотреть файл

@ -97,15 +97,23 @@
struct serial_rs485 rs485conf;
/* Set RS485 mode: */
/* Enable RS485 mode: */
rs485conf.flags |= SER_RS485_ENABLED;
/* Set logical level for RTS pin equal to 1 when sending: */
rs485conf.flags |= SER_RS485_RTS_ON_SEND;
/* or, set logical level for RTS pin equal to 0 when sending: */
rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
/* Set logical level for RTS pin equal to 1 after sending: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
/* or, set logical level for RTS pin equal to 0 after sending: */
rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
/* Set rts delay before send, if needed: */
rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
rs485conf.delay_rts_before_send = ...;
/* Set rts delay after send, if needed: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
rs485conf.delay_rts_after_send = ...;
/* Set this flag if you want to receive data even whilst sending data */

8
Documentation/sound/alsa/HD-Audio.txt
Просмотреть файл

@ -579,7 +579,7 @@ Development Tree
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
The hda-verb program is found in the ftp directory:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
The package is found in:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:

39
MAINTAINERS
Просмотреть файл

@ -789,6 +789,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
@ -804,6 +805,13 @@ S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-imx/*imx6*
ARM/FREESCALE MXS ARM ARCHITECTURE
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
F: arch/arm/mach-mxs/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1789,6 +1797,14 @@ F: include/net/cfg80211.h
F: net/wireless/*
X: net/wireless/wext*
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
M: Greg Kroah-Hartman <greg@kroah.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
S: Maintained
F: drivers/char/*
F: drivers/misc/*
CHECKPATCH
M: Andy Whitcroft <apw@canonical.com>
S: Supported
@ -1927,9 +1943,11 @@ S: Maintained
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
M: Paul Menage <paul@paulmenage.org>
M: Tejun Heo <tj@kernel.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
L: cgroups@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
@ -2584,7 +2602,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -3718,7 +3736,7 @@ F: fs/jbd2/
F: include/linux/jbd2.h
JSM Neo PCI based serial card
M: Breno Leitao <leitao@linux.vnet.ibm.com>
M: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
@ -4304,6 +4322,7 @@ MEMORY RESOURCE CONTROLLER
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
@ -4337,7 +4356,7 @@ MIPS
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/linux.git
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
@ -4470,7 +4489,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -4947,7 +4966,7 @@ F: drivers/char/ppdev.c
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
M: Jeremy Fitzhardinge <jeremy@xensource.com>
M: Jeremy Fitzhardinge <jeremy@goop.org>
M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
@ -5656,7 +5675,6 @@ F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassisinghbrar@gmail.com>
M: Sangbeom Kim <sbkim73@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
@ -5985,7 +6003,7 @@ S: Maintained
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -7399,8 +7417,8 @@ S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
M: Jeremy Fitzhardinge <jeremy@goop.org>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
@ -7433,7 +7451,8 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Alex Elder <aelder@sgi.com>
M: Ben Myers <bpm@sgi.com>
M: Alex Elder <elder@kernel.org>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs

2
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

20
arch/arm/Kconfig
Просмотреть файл

@ -1231,7 +1231,7 @@ config ARM_ERRATA_742231
capabilities of the processor.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
@ -1256,7 +1256,7 @@ config ARM_ERRATA_720789
entries regardless of the ASID.
config PL310_ERRATA_727915
bool "Background Clean & Invalidate by Way operation can cause data corruption"
bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
depends on CACHE_L2X0
help
PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@ -1289,8 +1289,8 @@ config ARM_ERRATA_751472
operation is received by a CPU before the ICIALLUIS has completed,
potentially leading to corrupted entries in the cache or TLB.
config ARM_ERRATA_753970
bool "ARM errata: cache sync operation may be faulty"
config PL310_ERRATA_753970
bool "PL310 errata: cache sync operation may be faulty"
depends on CACHE_PL310
help
This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@ -1352,6 +1352,18 @@ config ARM_ERRATA_764369
relevant cache maintenance functions and sets a specific bit
in the diagnostic control register of the SCU.
config PL310_ERRATA_769419
bool "PL310 errata: no automatic Store Buffer drain"
depends on CACHE_L2X0
help
On revisions of the PL310 prior to r3p2, the Store Buffer does
not automatically drain. This can cause normal, non-cacheable
writes to be retained when the memory system is idle, leading
to suboptimal I/O performance for drivers using coherent DMA.
This option adds a write barrier to the cpu_idle loop so that,
on systems with an outer cache, the store buffer is drained
explicitly.
endmenu
source "arch/arm/common/Kconfig"

2
arch/arm/boot/Makefile
Просмотреть файл

@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files := *.dtb
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \

16
arch/arm/common/gic.c
Просмотреть файл

@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
sizeof(u32));
BUG_ON(!gic->saved_ppi_conf);
cpu_pm_register_notifier(&gic_notifier_block);
if (gic == &gic_data[0])
cpu_pm_register_notifier(&gic_notifier_block);
}
#else
static void __init gic_pm_init(struct gic_chip_data *gic)
@ -581,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
*/
domain->hwirq_base = 32;
if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
domain->hwirq_base = 16;
if (irq_start > 0)
irq_start = (irq_start & ~31) + 16;
} else
domain->hwirq_base = 32;
if ((irq_start & 31) > 0) {
domain->hwirq_base = 16;
if (irq_start != -1)
irq_start = (irq_start & ~31) + 16;
}
}
/*
* Find out how many interrupts are supported.

12
arch/arm/common/pl330.c
Просмотреть файл

@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
ccr |= (rqc->swap << CC_SWAP_SHFT);
@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd)
return -1;
}
static bool _chan_ns(const struct pl330_info *pi, int i)
{
return pi->pcfg.irq_ns & (1 << i);
}
/* Upon success, returns IdentityToken for the
* allocated channel, NULL otherwise.
*/
@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi)
for (i = 0; i < chans; i++) {
thrd = &pl330->channels[i];
if (thrd->free) {
if ((thrd->free) && (!_manager_ns(thrd) ||
_chan_ns(pi, i))) {
thrd->ev = _alloc_event(thrd);
if (thrd->ev >= 0) {
thrd->free = false;

7
arch/arm/configs/at91cap9adk_defconfig → arch/arm/configs/at91cap9_defconfig
Просмотреть файл

@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y

47
arch/arm/configs/at91rm9200_defconfig
Просмотреть файл

@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_ARM_AT91_ETHER=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=y
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y

16
arch/arm/configs/at91sam9260ek_defconfig → arch/arm/configs/at91sam9260_defconfig
Просмотреть файл

@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9260=y
CONFIG_ARCH_AT91SAM9260_SAM9XE=y
CONFIG_MACH_AT91SAM9260EK=y
CONFIG_MACH_CAM60=y
CONFIG_MACH_SAM9_L9260=y
CONFIG_MACH_AFEB9260=y
CONFIG_MACH_USB_A9260=y
CONFIG_MACH_QIL_A9260=y
CONFIG_MACH_CPU9260=y
CONFIG_MACH_FLEXIBITY=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y

23
arch/arm/configs/at91sam9g20ek_defconfig → arch/arm/configs/at91sam9g20_defconfig
Просмотреть файл

@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
CONFIG_MACH_AT91SAM9G20EK_2MMC=y
CONFIG_MACH_CPU9G20=y
CONFIG_MACH_ACMENETUSFOXG20=y
CONFIG_MACH_PORTUXG20=y
CONFIG_MACH_STAMP9G20=y
CONFIG_MACH_PCONTROL_G20=y
CONFIG_MACH_GSIA18S=y
CONFIG_MACH_USB_A9G20=y
CONFIG_MACH_SNAPPER_9260=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
@ -21,9 +30,10 @@ CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_HW_RANDOM=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_SND_AT73C213=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

7
arch/arm/configs/at91sam9g45_defconfig
Просмотреть файл

@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G45=y
CONFIG_MACH_AT91SAM9M10G45EK=y
CONFIG_MACH_AT91SAM_DT=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_SLOW_CLOCK=y
CONFIG_AEABI=y
@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MACB=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_DAVICOM_PHY=y
CONFIG_LIBERTAS_THINFIRM=m
CONFIG_LIBERTAS_THINFIRM_USB=m
CONFIG_AT76C50X_USB=m
@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_FB_UDL=m

5
arch/arm/configs/at91sam9rlek_defconfig → arch/arm/configs/at91sam9rl_defconfig
Просмотреть файл

@ -23,8 +23,6 @@ CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
CONFIG_BLK_DEV_RAM_SIZE=24576
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_ATMEL=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91SAM9=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

2
arch/arm/configs/ezx_defconfig
Просмотреть файл

@ -287,7 +287,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y

2
arch/arm/configs/imote2_defconfig
Просмотреть файл

@ -263,7 +263,7 @@ CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_MMC=y

2
arch/arm/configs/magician_defconfig
Просмотреть файл

@ -132,7 +132,7 @@ CONFIG_USB_MON=m
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
CONFIG_USB_GADGETFS=m

1
arch/arm/configs/omap1_defconfig
Просмотреть файл

@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
CONFIG_OMAP_ARM_216MHZ=y
CONFIG_OMAP_ARM_195MHZ=y
CONFIG_OMAP_ARM_192MHZ=y

13
arch/arm/configs/u300_defconfig
Просмотреть файл

@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U300=y
CONFIG_MACH_U300=y
CONFIG_MACH_U300_BS335=y
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
CONFIG_MACH_U300_SPIDUMMY=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSMC=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_HWMON is not set
@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_CLKGATE=y
CONFIG_MMC_ARMMMCI=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRC32 is not set

14
arch/arm/configs/u8500_defconfig
Просмотреть файл

@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_U8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
CONFIG_NO_HZ=y
@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@ -72,15 +70,12 @@ CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
# CONFIG_HWMON is not set
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
CONFIG_USB_GADGET=y
CONFIG_AB8500_USB=y
CONFIG_MMC=y
@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
CONFIG_STE_DMA40=y
CONFIG_STAGING=y
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
CONFIG_HSEM_U8500=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y

2
arch/arm/configs/zeus_defconfig
Просмотреть файл

@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_PXA27X=y
CONFIG_USB_PXA27X=y
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m

2
arch/arm/include/asm/hardware/cache-l2x0.h
Просмотреть файл

@ -20,6 +20,8 @@
#ifndef __ASM_ARM_HARDWARE_L2X0_H
#define __ASM_ARM_HARDWARE_L2X0_H
#include <linux/errno.h>
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100

1
arch/arm/include/asm/mach/arch.h
Просмотреть файл

@ -13,6 +13,7 @@
struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
struct machine_desc {
unsigned int nr; /* architecture number */

10
arch/arm/include/asm/pmu.h
Просмотреть файл

@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type);
extern void
release_pmu(enum arm_pmu_type type);
/**
* init_pmu() - Initialise the PMU.
*
* Initialise the system ready for PMU enabling. This should typically set the
* IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
* the actual hardware initialisation.
*/
extern int
init_pmu(enum arm_pmu_type type);
#else /* CONFIG_CPU_HAS_PMU */
#include <linux/err.h>

2
arch/arm/include/asm/topology.h
Просмотреть файл

@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
void init_cpu_topology(void);
void store_cpu_topology(unsigned int cpuid);
const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
const struct cpumask *cpu_coregroup_mask(int cpu);
#else

2
arch/arm/include/asm/unistd.h
Просмотреть файл

@ -402,6 +402,8 @@
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/*
* The following SWIs are ARM private.

2
arch/arm/kernel/calls.S
Просмотреть файл

@ -385,6 +385,8 @@
CALL(sys_syncfs)
CALL(sys_sendmmsg)
/* 375 */ CALL(sys_setns)
CALL(sys_process_vm_readv)
CALL(sys_process_vm_writev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

2
arch/arm/kernel/entry-armv.S
Просмотреть файл

@ -497,7 +497,7 @@ ENDPROC(__und_usr)
.popsection
.pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
.long 2b, 4b
.long 3b, 4b
#endif

2
arch/arm/kernel/head.S
Просмотреть файл

@ -360,7 +360,7 @@ __secondary_data:
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A

4
arch/arm/kernel/kprobes-arm.c
Просмотреть файл

@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = {
static const union decode_item arm_cccc_0001_____1001_table[] = {
/* Synchronization primitives */
#if __LINUX_ARM_ARCH__ < 6
/* Deprecated on ARMv6 and may be UNDEFINED on v7 */
/* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
REGS(NOPC, NOPC, 0, 0, NOPC)),
#endif
/* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
/* And unallocated instructions... */
DECODE_END

27
arch/arm/kernel/kprobes-test-arm.c
Просмотреть файл

@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void)
TEST_GROUP("Synchronization primitives")
/*
* Use hard coded constants for SWP instructions to avoid warnings
* about deprecated instructions.
*/
TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
#if __LINUX_ARM_ARCH__ < 6
TEST_RP("swp lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( "swpvs r0, r",1,VAL1,", [sp]")
TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]")
#else
TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]")
TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]")
TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]")
#endif
TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
#if __LINUX_ARM_ARCH__ < 6
TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( "swpvsb r0, r",1,VAL1,", [sp]")
#else
TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]")
TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]")
#endif
TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
@ -550,7 +557,7 @@ void kprobe_arm_test_cases(void)
TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"")
TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")

16
arch/arm/kernel/kprobes-test-thumb.c
Просмотреть файл

@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void)
DONT_TEST_IN_ITBLOCK(
TEST_BF_R( "cbnz r",0,0, ", 2f")
TEST_BF_R( "cbz r",2,-1,", 2f")
TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
TEST_BF_RX( "cbnz r",4,1, ", 2f", SPACE_0x20)
TEST_BF_RX( "cbz r",7,0, ", 2f", SPACE_0x40)
)
TEST_R("sxth r0, r",7, HH1,"")
TEST_R("sxth r7, r",0, HH2,"")
@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK(
TESTCASE_START(code) \
TEST_ARG_PTR(13, offset) \
TEST_ARG_END("") \
TEST_BRANCH_F(code,0) \
TEST_BRANCH_F(code) \
TESTCASE_END
TEST("push {r0}")
@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8,
TEST_BF( "b 2f")
TEST_BB( "b 2b")
TEST_BF_X("b 2f", 0x400)
TEST_BB_X("b 2b", 0x400)
TEST_BF_X("b 2f", SPACE_0x400)
TEST_BB_X("b 2b", SPACE_0x400)
TEST_GROUP("Testing instructions in IT blocks")
@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22,
TEST_BB("bne.w 2b")
TEST_BF("bgt.w 2f")
TEST_BB("blt.w 2b")
TEST_BF_X("bpl.w 2f",0x1000)
TEST_BF_X("bpl.w 2f", SPACE_0x1000)
)
TEST_UNSUPPORTED("msr cpsr, r0")
@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22,
TEST_BF( "b.w 2f")
TEST_BB( "b.w 2b")
TEST_BF_X("b.w 2f", 0x1000)
TEST_BF_X("b.w 2f", SPACE_0x1000)
TEST_BF( "bl.w 2f")
TEST_BB( "bl.w 2b")
TEST_BB_X("bl.w 2b", 0x1000)
TEST_BB_X("bl.w 2b", SPACE_0x1000)
TEST_X( "blx __dummy_arm_subroutine",
".arm \n\t"

102
arch/arm/kernel/kprobes-test.h
Просмотреть файл

@ -149,23 +149,31 @@ struct test_arg_end {
"1: "instruction" \n\t" \
" nop \n\t"
#define TEST_BRANCH_F(instruction, xtra_dist) \
#define TEST_BRANCH_F(instruction) \
TEST_INSTRUCTION(instruction) \
".if "#xtra_dist" \n\t" \
" b 99f \n\t" \
".space "#xtra_dist" \n\t" \
".endif \n\t" \
" b 99f \n\t" \
"2: nop \n\t"
#define TEST_BRANCH_B(instruction, xtra_dist) \
#define TEST_BRANCH_B(instruction) \
" b 50f \n\t" \
" b 99f \n\t" \
"2: nop \n\t" \
" b 99f \n\t" \
".if "#xtra_dist" \n\t" \
".space "#xtra_dist" \n\t" \
".endif \n\t" \
TEST_INSTRUCTION(instruction)
#define TEST_BRANCH_FX(instruction, codex) \
TEST_INSTRUCTION(instruction) \
" b 99f \n\t" \
codex" \n\t" \
" b 99f \n\t" \
"2: nop \n\t"
#define TEST_BRANCH_BX(instruction, codex) \
" b 50f \n\t" \
" b 99f \n\t" \
"2: nop \n\t" \
" b 99f \n\t" \
codex" \n\t" \
TEST_INSTRUCTION(instruction)
#define TESTCASE_END \
@ -301,47 +309,60 @@ struct test_arg_end {
TESTCASE_START(code1 #reg1 code2) \
TEST_ARG_PTR(reg1, val1) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg1 code2, 0) \
TEST_BRANCH_F(code1 #reg1 code2) \
TESTCASE_END
#define TEST_BF_X(code, xtra_dist) \
#define TEST_BF(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_F(code, xtra_dist) \
TEST_BRANCH_F(code) \
TESTCASE_END
#define TEST_BB_X(code, xtra_dist) \
#define TEST_BB(code) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_B(code, xtra_dist) \
TEST_BRANCH_B(code) \
TESTCASE_END
#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
#define TEST_BF_R(code1, reg, val, code2) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg code2) \
TESTCASE_END
#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
#define TEST_BB_R(code1, reg, val, code2) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_B(code1 #reg code2) \
TESTCASE_END
#define TEST_BF(code) TEST_BF_X(code, 0)
#define TEST_BB(code) TEST_BB_X(code, 0)
#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
TEST_ARG_REG(reg1, val1) \
TEST_ARG_REG(reg2, val2) \
TEST_ARG_END("") \
TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3) \
TESTCASE_END
#define TEST_BF_X(code, codex) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_FX(code, codex) \
TESTCASE_END
#define TEST_BB_X(code, codex) \
TESTCASE_START(code) \
TEST_ARG_END("") \
TEST_BRANCH_BX(code, codex) \
TESTCASE_END
#define TEST_BF_RX(code1, reg, val, code2, codex) \
TESTCASE_START(code1 #reg code2) \
TEST_ARG_REG(reg, val) \
TEST_ARG_END("") \
TEST_BRANCH_FX(code1 #reg code2, codex) \
TESTCASE_END
#define TEST_X(code, codex) \
@ -372,6 +393,25 @@ struct test_arg_end {
TESTCASE_END
/*
* Macros for defining space directives spread over multiple lines.
* These are required so the compiler guesses better the length of inline asm
* code and will spill the literal pool early enough to avoid generating PC
* relative loads with out of range offsets.
*/
#define TWICE(x) x x
#define SPACE_0x8 TWICE(".space 4\n\t")
#define SPACE_0x10 TWICE(SPACE_0x8)
#define SPACE_0x20 TWICE(SPACE_0x10)
#define SPACE_0x40 TWICE(SPACE_0x20)
#define SPACE_0x80 TWICE(SPACE_0x40)
#define SPACE_0x100 TWICE(SPACE_0x80)
#define SPACE_0x200 TWICE(SPACE_0x100)
#define SPACE_0x400 TWICE(SPACE_0x200)
#define SPACE_0x800 TWICE(SPACE_0x400)
#define SPACE_0x1000 TWICE(SPACE_0x800)
/* Various values used in test cases... */
#define N(val) (val ^ 0xffffffff)
#define VAL1 0x12345678

35
arch/arm/kernel/machine_kexec.c
Просмотреть файл

@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
int machine_kexec_prepare(struct kimage *image)
{
unsigned long page_list;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
return 0;
}
@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
/* we need both effective and real address here */
reboot_code_buffer_phys =
page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)

11
arch/arm/kernel/perf_event.c
Просмотреть файл

@ -343,8 +343,14 @@ validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
memset(&fake_pmu, 0, sizeof(fake_pmu));
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
memset(fake_used_mask, 0, sizeof(fake_used_mask));
fake_pmu.used_mask = fake_used_mask;
if (!validate_event(&fake_pmu, leader))
return -ENOSPC;
@ -396,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
int i, err, irq, irqs;
struct platform_device *pmu_device = armpmu->plat_device;
if (!pmu_device)
return -ENODEV;
err = reserve_pmu(armpmu->type);
if (err) {
pr_warning("unable to reserve pmu\n");

1
arch/arm/kernel/pmu.c
Просмотреть файл

@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type)
{
clear_bit_unlock(type, pmu_lock);
}
EXPORT_SYMBOL_GPL(release_pmu);

3
arch/arm/kernel/process.c
Просмотреть файл

@ -192,6 +192,9 @@ void cpu_idle(void)
#endif
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
#endif
if (hlt_counter) {
local_irq_enable();
cpu_relax();

6
arch/arm/kernel/setup.c
Просмотреть файл

@ -461,8 +461,10 @@ static void __init setup_processor(void)
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
list->arch_name, ENDIANNESS);
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;

2
arch/arm/kernel/topology.c
Просмотреть файл

@ -43,7 +43,7 @@
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
const struct cpumask *cpu_coregroup_mask(int cpu)
{
return &cpu_topology[cpu].core_sibling;
}

26
arch/arm/lib/bitops.h
Просмотреть файл

@ -1,5 +1,9 @@
#include <asm/unwind.h>
#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, instr
.macro bitop, name, instr
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@ -13,9 +17,13 @@
cmp r0, #0
bne 1b
bx lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
.macro testop, instr, store
.macro testop, name, instr, store
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
mov r2, #1
@ -34,9 +42,13 @@
cmp r0, #0
movne r0, #1
2: bx lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
#else
.macro bitop, instr
.macro bitop, name, instr
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r2, r0, #31
@ -49,6 +61,8 @@
str r2, [r1, r0, lsl #2]
restore_irqs ip
mov pc, lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
/**
@ -59,7 +73,9 @@
* Note: we can trivially conditionalise the store instruction
* to avoid dirtying the data cache.
*/
.macro testop, instr, store
.macro testop, name, instr, store
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
and r3, r0, #31
@ -73,5 +89,7 @@
moveq r0, #0
restore_irqs ip
mov pc, lr
UNWIND( .fnend )
ENDPROC(\name )
.endm
#endif

4
arch/arm/lib/changebit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_change_bit)
bitop eor
ENDPROC(_change_bit)
bitop _change_bit, eor

4
arch/arm/lib/clearbit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_clear_bit)
bitop bic
ENDPROC(_clear_bit)
bitop _clear_bit, bic

4
arch/arm/lib/setbit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_set_bit)
bitop orr
ENDPROC(_set_bit)
bitop _set_bit, orr

4
arch/arm/lib/testchangebit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_change_bit)
testop eor, str
ENDPROC(_test_and_change_bit)
testop _test_and_change_bit, eor, str

4
arch/arm/lib/testclearbit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_clear_bit)
testop bicne, strne
ENDPROC(_test_and_clear_bit)
testop _test_and_clear_bit, bicne, strne

4
arch/arm/lib/testsetbit.S
Просмотреть файл

@ -12,6 +12,4 @@
#include "bitops.h"
.text
ENTRY(_test_and_set_bit)
testop orreq, streq
ENDPROC(_test_and_set_bit)
testop _test_and_set_bit, orreq, streq

2
arch/arm/mach-bcmring/core.c
Просмотреть файл

@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
*/
bcmring_clocksource_init();
sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {

1
arch/arm/mach-bcmring/dma.c
Просмотреть файл

@ -36,6 +36,7 @@
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

2
arch/arm/mach-exynos/cpuidle.c
Просмотреть файл

@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/cpuidle.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/time.h>
#include <asm/proc-fns.h>

4
arch/arm/mach-highbank/highbank.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/cacheflush.h>
#include <asm/unified.h>
@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
#endif
writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

13
arch/arm/mach-imx/Kconfig
Просмотреть файл

@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
config HAVE_IMX_SRC
bool
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
config ARCH_MX1
bool
@ -27,12 +22,6 @@ config ARCH_MX25
config MACH_MX27
bool
config ARCH_MX31
bool
config ARCH_MX35
bool
config SOC_IMX1
bool
select ARCH_MX1
@ -72,7 +61,6 @@ config SOC_IMX31
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
select MXC_AVIC
select SMP_ON_UP if SMP
@ -82,7 +70,6 @@ config SOC_IMX35
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select HAVE_EPIT
select ARCH_MX35
select MXC_AVIC
select SMP_ON_UP if SMP

7
arch/arm/mach-imx/clock-imx6q.c
Просмотреть файл

@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = {
imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
};
void __init imx6q_clock_map_io(void)
{
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
}
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
int i, irq;
iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
/* retrieve the freqency of fixed clocks from device tree */
for_each_compatible_node(np, NULL, "fixed-clock") {
u32 rate;

1
arch/arm/mach-imx/mach-imx6q.c
Просмотреть файл

@ -34,6 +34,7 @@ static void __init imx6q_map_io(void)
{
imx_lluart_map_io();
imx_scu_map_io();
imx6q_clock_map_io();
}
static void __init imx6q_gpio_add_irq_domain(struct device_node *np,

109
arch/arm/mach-imx/mm-imx3.c
Просмотреть файл

@ -33,29 +33,32 @@
static void imx3_idle(void)
{
unsigned long reg = 0;
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"bic %0, %0, #0x00001000\n"
"bic %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
/* invalidate I cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c5, 0\n"
/* clear and invalidate D cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c14, 0\n"
/* WFI */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c0, 4\n"
"nop\n" "nop\n" "nop\n" "nop\n"
"nop\n" "nop\n" "nop\n"
/* enable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"orr %0, %0, #0x00001000\n"
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
if (!need_resched())
__asm__ __volatile__(
/* disable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"bic %0, %0, #0x00001000\n"
"bic %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
/* invalidate I cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c5, 0\n"
/* clear and invalidate D cache */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c14, 0\n"
/* WFI */
"mov %0, #0\n"
"mcr p15, 0, %0, c7, c0, 4\n"
"nop\n" "nop\n" "nop\n" "nop\n"
"nop\n" "nop\n" "nop\n"
/* enable I and D cache */
"mrc p15, 0, %0, c1, c0, 0\n"
"orr %0, %0, #0x00001000\n"
"orr %0, %0, #0x00000004\n"
"mcr p15, 0, %0, c1, c0, 0\n"
: "=r" (reg));
local_irq_enable();
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
}
#ifdef CONFIG_SOC_IMX31
static struct map_desc mx31_io_desc[] __initdata = {
imx_map_entry(MX31, X_MEMC, MT_DEVICE),
imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@ -126,33 +130,11 @@ void __init mx31_map_io(void)
iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
}
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx31_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
.per_2_per_addr = 1677,
};
@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
static struct map_desc mx35_io_desc[] __initdata = {
imx_map_entry(MX35, X_MEMC, MT_DEVICE),
imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
};
void __init mx35_map_io(void)
{
iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
}
void __init imx35_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
void __init mx35_init_irq(void)
{
mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
.ap_2_ap_addr = 642,
@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
}
#endif /* ifdef CONFIG_SOC_IMX35 */

7
arch/arm/mach-imx/src.c
Просмотреть файл

@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/smp.h>
#include <asm/unified.h>
#define SRC_SCR 0x000
@ -23,10 +24,15 @@
static void __iomem *src_base;
#ifndef CONFIG_SMP
#define cpu_logical_map(cpu) 0
#endif
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
cpu = cpu_logical_map(cpu);
mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable)
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = cpu_logical_map(cpu);
writel_relaxed(BSYM(virt_to_phys(jump_addr)),
src_base + SRC_GPR1 + cpu * 8);
}

2
arch/arm/mach-mmp/gplugd.c
Просмотреть файл

@ -182,7 +182,7 @@ static void __init gplugd_init(void)
/* on-chip devices */
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_ssp(1);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
pxa168_add_eth(&gplugd_eth_platform_data);

2
arch/arm/mach-mmp/include/mach/gpio-pxa.h
Просмотреть файл

@ -7,7 +7,7 @@
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM

5
arch/arm/mach-mx5/cpu.c
Просмотреть файл

@ -16,7 +16,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <linux/io.h>
static int mx5_cpu_rev = -1;
@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
if (!cpu_is_mx51())
return 0;
if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
(elf_hwcap & HWCAP_NEON)) {
elf_hwcap &= ~HWCAP_NEON;
pr_info("Turning off NEON support, detected broken NEON implementation\n");
}

6
arch/arm/mach-mx5/mm.c
Просмотреть файл

@ -23,7 +23,9 @@
static void imx5_idle(void)
{
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (!need_resched())
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
local_irq_enable();
}
/*
@ -89,7 +91,7 @@ void __init imx51_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
imx_idle = imx5_idle;
pm_idle = imx5_idle;
}
void __init imx53_init_early(void)

2
arch/arm/mach-mxs/clock-mx28.c
Просмотреть файл

@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
reg &= ~BM_CLKCTRL_##dr##_DIV; \
reg |= div << BP_CLKCTRL_##dr##_DIV; \
if (reg | (1 << clk->enable_shift)) { \
if (reg & (1 << clk->enable_shift)) { \
pr_err("%s: clock is gated\n", __func__); \
return -EINVAL; \
} \

8
arch/arm/mach-omap1/Kconfig
Просмотреть файл

@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
config OMAP_CLOCKS_SET_BY_BOOTLOADER
bool "OMAP clocks set by bootloader"
depends on ARCH_OMAP1
help
Enable this option to prevent the kernel from overriding the clock
frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
internal LCD controller and MPU peripherals.
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX

10
arch/arm/mach-omap1/board-ams-delta.c
Просмотреть файл

@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
omap_board_config_size = ARRAY_SIZE(ams_delta_config);
omap_serial_init();
@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
}
arch_initcall(ams_delta_modem_init);
static void __init ams_delta_map_io(void)
{
omap15xx_map_io();
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,

3
arch/arm/mach-omap1/clock.h
Просмотреть файл

@ -17,7 +17,8 @@
#include <plat/clock.h>
extern int __init omap1_clk_init(void);
int omap1_clk_init(void);
void omap1_clk_late_init(void);
extern int omap1_clk_enable(struct clk *clk);
extern void omap1_clk_disable(struct clk *clk);
extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);

53
arch/arm/mach-omap1/clock_data.c
Просмотреть файл

@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
.clk_disable_unused = omap1_clk_disable_unused,
};
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
int __init omap1_clk_init(void)
{
struct omap_clk *c;
@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
/* We want to be in syncronous scalable mode */
omap_writew(0x1000, ARM_SYSST);
#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
/* Use values set by bootloader. Determine PLL rate and recalculate
* dependent clocks as if kernel had changed PLL or divisors.
/*
* Initially use the values set by bootloader. Determine PLL rate and
* recalculate dependent clocks as if kernel had changed PLL or
* divisors. See also omap1_clk_late_init() that can reprogram dpll1
* after the SRAM is initialized.
*/
{
unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
}
}
}
#else
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
printk(KERN_ERR "System frequencies not set. Check your config.\n");
/* Guess sane values (60MHz) */
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = 60000000;
}
#endif
propagate_rate(&ck_dpll1);
/* Cache rates for clocks connected to ck_ref (not dpll1) */
propagate_rate(&ck_ref);
printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
omap1_show_rates();
if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
/* Select slicer output as OMAP input clock */
omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
return 0;
}
#define OMAP1_DPLL1_SANE_VALUE 60000000
void __init omap1_clk_late_init(void)
{
if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
return;
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);
omap1_show_rates();
}

3
arch/arm/mach-omap1/devices.c
Просмотреть файл

@ -30,6 +30,8 @@
#include <plat/omap7xx.h>
#include <plat/mcbsp.h>
#include "clock.h"
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
return -ENODEV;
omap_sram_init();
omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.

1
arch/arm/mach-omap2/Kconfig
Просмотреть файл

@ -334,6 +334,7 @@ config MACH_OMAP4_PANDA
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
select ARM_AMBA
select OC_ETM
help
Say Y here to enable debugging hardware of omap3

5
arch/arm/mach-omap2/Makefile
Просмотреть файл

@ -4,7 +4,7 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
common.o gpio.o dma.o wd_timer.o display.o
omap-2-3-common = irq.o sdrc.o
hwmod-common = omap_hwmod.o \
@ -264,7 +264,4 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o twl-common.o

1
arch/arm/mach-omap2/cpuidle34xx.c
Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
#include <plat/prcm.h>
#include <plat/irqs.h>

159
arch/arm/mach-omap2/display.c
Просмотреть файл

@ -27,8 +27,35 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include <plat/common.h>
#include "control.h"
#include "display.h"
#define DISPC_CONTROL 0x0040
#define DISPC_CONTROL2 0x0238
#define DISPC_IRQSTATUS 0x0018
#define DSS_SYSCONFIG 0x10
#define DSS_SYSSTATUS 0x14
#define DSS_CONTROL 0x40
#define DSS_SDI_CONTROL 0x44
#define DSS_PLL_CONTROL 0x48
#define LCD_EN_MASK (0x1 << 0)
#define DIGIT_EN_MASK (0x1 << 1)
#define FRAMEDONE_IRQ_SHIFT 0
#define EVSYNC_EVEN_IRQ_SHIFT 2
#define EVSYNC_ODD_IRQ_SHIFT 3
#define FRAMEDONE2_IRQ_SHIFT 22
#define FRAMEDONETV_IRQ_SHIFT 24
/*
* FRAMEDONE_IRQ_TIMEOUT: how long (in milliseconds) to wait during DISPC
* reset before deciding that something has gone wrong
*/
#define FRAMEDONE_IRQ_TIMEOUT 100
static struct platform_device omap_display_device = {
.name = "omapdss",
@ -172,3 +199,135 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
return r;
}
static void dispc_disable_outputs(void)
{
u32 v, irq_mask = 0;
bool lcd_en, digit_en, lcd2_en = false;
int i;
struct omap_dss_dispc_dev_attr *da;
struct omap_hwmod *oh;
oh = omap_hwmod_lookup("dss_dispc");
if (!oh) {
WARN(1, "display: could not disable outputs during reset - could not find dss_dispc hwmod\n");
return;
}
if (!oh->dev_attr) {
pr_err("display: could not disable outputs during reset due to missing dev_attr\n");
return;
}
da = (struct omap_dss_dispc_dev_attr *)oh->dev_attr;
/* store value of LCDENABLE and DIGITENABLE bits */
v = omap_hwmod_read(oh, DISPC_CONTROL);
lcd_en = v & LCD_EN_MASK;
digit_en = v & DIGIT_EN_MASK;
/* store value of LCDENABLE for LCD2 */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
lcd2_en = v & LCD_EN_MASK;
}
if (!(lcd_en | digit_en | lcd2_en))
return; /* no managers currently enabled */
/*
* If any manager was enabled, we need to disable it before
* DSS clocks are disabled or DISPC module is reset
*/
if (lcd_en)
irq_mask |= 1 << FRAMEDONE_IRQ_SHIFT;
if (digit_en) {
if (da->has_framedonetv_irq) {
irq_mask |= 1 << FRAMEDONETV_IRQ_SHIFT;
} else {
irq_mask |= 1 << EVSYNC_EVEN_IRQ_SHIFT |
1 << EVSYNC_ODD_IRQ_SHIFT;
}
}
if (lcd2_en)
irq_mask |= 1 << FRAMEDONE2_IRQ_SHIFT;
/*
* clear any previous FRAMEDONE, FRAMEDONETV,
* EVSYNC_EVEN/ODD or FRAMEDONE2 interrupts
*/
omap_hwmod_write(irq_mask, oh, DISPC_IRQSTATUS);
/* disable LCD and TV managers */
v = omap_hwmod_read(oh, DISPC_CONTROL);
v &= ~(LCD_EN_MASK | DIGIT_EN_MASK);
omap_hwmod_write(v, oh, DISPC_CONTROL);
/* disable LCD2 manager */
if (da->manager_count > 2) {
v = omap_hwmod_read(oh, DISPC_CONTROL2);
v &= ~LCD_EN_MASK;
omap_hwmod_write(v, oh, DISPC_CONTROL2);
}
i = 0;
while ((omap_hwmod_read(oh, DISPC_IRQSTATUS) & irq_mask) !=
irq_mask) {
i++;
if (i > FRAMEDONE_IRQ_TIMEOUT) {
pr_err("didn't get FRAMEDONE1/2 or TV interrupt\n");
break;
}
mdelay(1);
}
}
#define MAX_MODULE_SOFTRESET_WAIT 10000
int omap_dss_reset(struct omap_hwmod *oh)
{
struct omap_hwmod_opt_clk *oc;
int c = 0;
int i, r;
if (!(oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)) {
pr_err("dss_core: hwmod data doesn't contain reset data\n");
return -EINVAL;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_enable(oc->_clk);
dispc_disable_outputs();
/* clear SDI registers */
if (cpu_is_omap3430()) {
omap_hwmod_write(0x0, oh, DSS_SDI_CONTROL);
omap_hwmod_write(0x0, oh, DSS_PLL_CONTROL);
}
/*
* clear DSS_CONTROL register to switch DSS clock sources to
* PRCM clock, if any
*/
omap_hwmod_write(0x0, oh, DSS_CONTROL);
omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("dss_core: waiting for reset to finish failed\n");
else
pr_debug("dss_core: softreset done\n");
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
if (oc->_clk)
clk_disable(oc->_clk);
r = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
return r;
}

29
arch/arm/mach-omap2/display.h Normal file
Просмотреть файл

@ -0,0 +1,29 @@
/*
* display.h - OMAP2+ integration-specific DSS header
*
* Copyright (C) 2011 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#define __ARCH_ARM_MACH_OMAP2_DISPLAY_H
#include <linux/kernel.h>
struct omap_dss_dispc_dev_attr {
u8 manager_count;
bool has_framedonetv_irq;
};
#endif

0
arch/arm/mach-omap2/io.h
Просмотреть файл

6
arch/arm/mach-omap2/omap_hwmod.c
Просмотреть файл

@ -749,7 +749,7 @@ static int _count_mpu_irqs(struct omap_hwmod *oh)
ohii = &oh->mpu_irqs[i++];
} while (ohii->irq != -1);
return i;
return i-1;
}
/**
@ -772,7 +772,7 @@ static int _count_sdma_reqs(struct omap_hwmod *oh)
ohdi = &oh->sdma_reqs[i++];
} while (ohdi->dma_req != -1);
return i;
return i-1;
}
/**
@ -795,7 +795,7 @@ static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
mem = &os->addr[i++];
} while (mem->pa_start != mem->pa_end);
return i;
return i-1;
}
/**

17
arch/arm/mach-omap2/omap_hwmod_2420_data.c
Просмотреть файл

@ -875,6 +875,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@ -899,7 +903,7 @@ static struct omap_hwmod omap2420_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
@ -939,6 +943,7 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = {
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
@ -961,6 +966,10 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
&omap2420_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@ -972,6 +981,8 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@ -981,7 +992,7 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_dss_venc_hwmod,
.clk = "dss_54m_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@ -1001,7 +1012,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
static struct omap_hwmod omap2420_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_fck",
.main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,

17
arch/arm/mach-omap2/omap_hwmod_2430_data.c
Просмотреть файл

@ -942,6 +942,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "tv_clk", .clk = "dss_54m_fck" },
{ .role = "sys_clk", .clk = "dss2_fck" },
};
@ -966,7 +970,7 @@ static struct omap_hwmod omap2430_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
/* l4_core -> dss_dispc */
@ -1000,6 +1004,7 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = {
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/* l4_core -> dss_rfbi */
@ -1016,6 +1021,10 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
&omap2430_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@ -1027,6 +1036,8 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
.module_offs = CORE_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@ -1036,7 +1047,7 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_54m_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
@ -1050,7 +1061,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
static struct omap_hwmod omap2430_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_fck",
.main_clk = "dss_54m_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,

5
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
Просмотреть файл

@ -11,6 +11,7 @@
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include <plat/dma.h>
#include <plat/common.h>
#include <mach/irqs.h>
@ -43,13 +44,15 @@ static struct omap_hwmod_class_sysconfig omap2_dss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2_dss_hwmod_class = {
.name = "dss",
.sysc = &omap2_dss_sysc,
.reset = omap_dss_reset,
};
/*

37
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
Просмотреть файл

@ -1369,9 +1369,14 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
};
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "tv_clk", .clk = "dss_tv_fck" },
{ .role = "video_clk", .clk = "dss_96m_fck" },
/*
* The DSS HW needs all DSS clocks enabled during reset. The dss_core
* driver does not use these clocks.
*/
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
{ .role = "tv_clk", .clk = "dss_tv_fck" },
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3430es1_dss_core_hwmod = {
@ -1394,11 +1399,12 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
.flags = HWMOD_NO_IDLEST,
.flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.name = "dss_core",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap2_dss_hwmod_class,
.main_clk = "dss1_alwon_fck", /* instead of dss_fck */
.sdma_reqs = omap3xxx_dss_sdma_chs,
@ -1456,6 +1462,7 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
.flags = HWMOD_NO_IDLEST,
.dev_attr = &omap2_3_dss_dispc_dev_attr
};
/*
@ -1486,6 +1493,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_dsi1_hwmod,
.clk = "dss_ick",
.addr = omap3xxx_dss_dsi1_addrs,
.fw = {
.omap2 = {
@ -1502,6 +1510,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
&omap3xxx_l4_core__dss_dsi1,
};
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss2_alwon_fck" },
};
static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.name = "dss_dsi1",
.class = &omap3xxx_dsi_hwmod_class,
@ -1514,6 +1526,8 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
.flags = HWMOD_NO_IDLEST,
@ -1540,6 +1554,10 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
&omap3xxx_l4_core__dss_rfbi,
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_ick" },
};
static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.name = "dss_rfbi",
.class = &omap2_rfbi_hwmod_class,
@ -1551,6 +1569,8 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
.flags = HWMOD_NO_IDLEST,
@ -1560,7 +1580,7 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_dss_venc_hwmod,
.clk = "dss_tv_fck",
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.fw = {
.omap2 = {
@ -1578,10 +1598,15 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
&omap3xxx_l4_core__dss_venc,
};
static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
/* required only on OMAP3430 */
{ .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap2_venc_hwmod_class,
.main_clk = "dss1_alwon_fck",
.main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@ -1589,6 +1614,8 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
.module_offs = OMAP3430_DSS_MOD,
},
},
.opt_clks = dss_venc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
.flags = HWMOD_NO_IDLEST,

24
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <plat/mmc.h>
#include <plat/i2c.h>
#include <plat/dmtimer.h>
#include <plat/common.h>
#include "omap_hwmod_common_data.h"
@ -1187,6 +1188,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = {
static struct omap_hwmod_class omap44xx_dss_hwmod_class = {
.name = "dss",
.sysc = &omap44xx_dss_sysc,
.reset = omap_dss_reset,
};
/* dss */
@ -1240,12 +1242,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "dss_clk", .clk = "dss_dss_clk" },
{ .role = "video_clk", .clk = "dss_48mhz_clk" },
{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_hwmod = {
.name = "dss_core",
.flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
.class = &omap44xx_dss_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.main_clk = "dss_dss_clk",
@ -1325,6 +1327,11 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
{ }
};
static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
.manager_count = 3,
.has_framedonetv_irq = 1
};
/* l4_per -> dss_dispc */
static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
.master = &omap44xx_l4_per_hwmod,
@ -1340,12 +1347,6 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
&omap44xx_l4_per__dss_dispc,
};
static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
{ .role = "hdmi_clk", .clk = "dss_48mhz_clk" },
};
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
@ -1359,10 +1360,9 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
.opt_clks = dss_dispc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.dev_attr = &omap44xx_dss_dispc_dev_attr
};
/*
@ -1624,7 +1624,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_dss_clk",
.main_clk = "dss_48mhz_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
@ -1785,7 +1785,7 @@ static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.main_clk = "dss_dss_clk",
.main_clk = "dss_tv_clk",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,

4
arch/arm/mach-omap2/omap_hwmod_common_data.c
Просмотреть файл

@ -49,3 +49,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
};
struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
.manager_count = 2,
.has_framedonetv_irq = 0
};

4
arch/arm/mach-omap2/omap_hwmod_common_data.h
Просмотреть файл

@ -16,6 +16,8 @@
#include <plat/omap_hwmod.h>
#include "display.h"
/* Common address space across OMAP2xxx */
extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
@ -111,4 +113,6 @@ extern struct omap_hwmod_class omap2xxx_dma_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class;
extern struct omap_hwmod_class omap2xxx_mcspi_class;
extern struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr;
#endif

2
arch/arm/mach-omap2/omap_l3_noc.c
Просмотреть файл

@ -237,7 +237,7 @@ static int __devexit omap4_l3_remove(struct platform_device *pdev)
static const struct of_device_id l3_noc_match[] = {
{.compatible = "ti,omap4-l3-noc", },
{},
}
};
MODULE_DEVICE_TABLE(of, l3_noc_match);
#else
#define l3_noc_match NULL

6
arch/arm/mach-omap2/pm.c
Просмотреть файл

@ -24,6 +24,7 @@
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
#include "twl-common.h"
static struct omap_device_pm_latency *pm_lats;
@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
/* Init the OMAP TWL parameters */
omap3_twl_init();
omap4_twl_init();
/* Init the voltage layer */
omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */

2
arch/arm/mach-omap2/smartreflex.c
Просмотреть файл

@ -139,7 +139,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
sr_write_reg(sr_info, ERRCONFIG_V1, status);
} else if (sr_info->ip_type == SR_TYPE_V2) {
/* Read the status bits */
sr_read_reg(sr_info, IRQSTATUS);
status = sr_read_reg(sr_info, IRQSTATUS);
/* Clear them by writing back */
sr_write_reg(sr_info, IRQSTATUS, status);

11
arch/arm/mach-omap2/twl-common.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <plat/usb.h>
#include "twl-common.h"
#include "pm.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
if (!pmic_i2c_board_info.irq)
return;
omap3_twl_init();
omap4_twl_init();
}
#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,

3
arch/arm/mach-omap2/twl-common.h
Просмотреть файл

@ -1,6 +1,8 @@
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
#include <plat/irqs.h>
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
#define TWL_COMMON_PDATA_MADC (1 << 2)
@ -30,6 +32,7 @@ struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
void omap_pmic_late_init(void);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)

2
arch/arm/mach-pxa/balloon3.c
Просмотреть файл

@ -307,7 +307,7 @@ static inline void balloon3_mmc_init(void) {}
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static void balloon3_udc_command(int cmd)
{
if (cmd == PXA2XX_UDC_CMD_CONNECT)

2
arch/arm/mach-pxa/colibri-pxa320.c
Просмотреть файл

@ -146,7 +146,7 @@ static void __init colibri_pxa320_init_eth(void)
static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
.gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
.gpio_pullup = -1,

2
arch/arm/mach-pxa/gumstix.c
Просмотреть файл

@ -106,7 +106,7 @@ static void __init gumstix_mmc_init(void)
}
#endif
#ifdef CONFIG_USB_GADGET_PXA25X
#ifdef CONFIG_USB_PXA25X
static struct gpio_vbus_mach_info gumstix_udc_info = {
.gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
.gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,

4
arch/arm/mach-pxa/include/mach/palm27x.h
Просмотреть файл

@ -37,8 +37,8 @@ extern void __init palm27x_lcd_init(int power,
#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X) || \
defined(CONFIG_USB_PXA27X_MODULE)
extern void __init palm27x_udc_init(int vbus, int pullup,
int vbus_inverted);
#else

4
arch/arm/mach-pxa/palm27x.c
Просмотреть файл

@ -164,8 +164,8 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X) || \
defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X) || \
defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info palm27x_udc_info = {
.gpio_vbus_inverted = 1,
};

2
arch/arm/mach-pxa/palmtc.c
Просмотреть файл

@ -338,7 +338,7 @@ static inline void palmtc_mkp_init(void) {}
/******************************************************************************
* UDC
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
static struct gpio_vbus_mach_info palmtc_udc_info = {
.gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
.gpio_vbus_inverted = 1,

2
arch/arm/mach-pxa/vpac270.c
Просмотреть файл

@ -343,7 +343,7 @@ static inline void vpac270_uhc_init(void) {}
/******************************************************************************
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
.gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
.gpio_pullup = -1,

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше