dmaengine: fsl-edma: add i.mx7ulp edma2 version support

Add edma2 for i.mx7ulp by version v3, since v2 has already
been used by mcf-edma.
The big changes based on v1 are belows:
1. only one dmamux.
2. another clock dma_clk except dmamux clk.
3. 16 independent interrupts instead of only one interrupt for
all channels.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Tested-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Robin Gong 2019-06-25 17:43:23 +08:00 коммит произвёл Vinod Koul
Родитель a7c5c6f6bc
Коммит 7144afd025
3 изменённых файлов: 87 добавлений и 1 удалений

Просмотреть файл

@ -90,6 +90,19 @@ static void mux_configure8(struct fsl_edma_chan *fsl_chan, void __iomem *addr,
iowrite8(val8, addr + off);
}
void mux_configure32(struct fsl_edma_chan *fsl_chan, void __iomem *addr,
u32 off, u32 slot, bool enable)
{
u32 val;
if (enable)
val = EDMAMUX_CHCFG_ENBL << 24 | slot;
else
val = EDMAMUX_CHCFG_DIS;
iowrite32(val, addr + off * 4);
}
void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
unsigned int slot, bool enable)
{
@ -103,6 +116,9 @@ void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
slot = EDMAMUX_CHCFG_SOURCE(slot);
if (fsl_chan->edma->drvdata->version == v3)
mux_configure32(fsl_chan, muxaddr, ch_off, slot, enable);
else
mux_configure8(fsl_chan, muxaddr, ch_off, slot, enable);
}
EXPORT_SYMBOL_GPL(fsl_edma_chan_mux);

Просмотреть файл

@ -125,6 +125,7 @@ struct fsl_edma_chan {
dma_addr_t dma_dev_addr;
u32 dma_dev_size;
enum dma_data_direction dma_dir;
char chan_name[16];
};
struct fsl_edma_desc {
@ -139,11 +140,13 @@ struct fsl_edma_desc {
enum edma_version {
v1, /* 32ch, Vybrid, mpc57x, etc */
v2, /* 64ch Coldfire */
v3, /* 32ch, i.mx7ulp */
};
struct fsl_edma_drvdata {
enum edma_version version;
u32 dmamuxs;
bool has_dmaclk;
int (*setup_irq)(struct platform_device *pdev,
struct fsl_edma_engine *fsl_edma);
};
@ -153,6 +156,7 @@ struct fsl_edma_engine {
void __iomem *membase;
void __iomem *muxbase[DMAMUX_NR];
struct clk *muxclk[DMAMUX_NR];
struct clk *dmaclk;
struct mutex fsl_edma_mutex;
const struct fsl_edma_drvdata *drvdata;
u32 n_chans;

Просмотреть файл

@ -166,6 +166,50 @@ fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma
return 0;
}
static int
fsl_edma2_irq_init(struct platform_device *pdev,
struct fsl_edma_engine *fsl_edma)
{
struct device_node *np = pdev->dev.of_node;
int i, ret, irq;
int count;
count = of_irq_count(np);
dev_dbg(&pdev->dev, "%s Found %d interrupts\r\n", __func__, count);
if (count <= 2) {
dev_err(&pdev->dev, "Interrupts in DTS not correct.\n");
return -EINVAL;
}
/*
* 16 channel independent interrupts + 1 error interrupt on i.mx7ulp.
* 2 channel share one interrupt, for example, ch0/ch16, ch1/ch17...
* For now, just simply request irq without IRQF_SHARED flag, since 16
* channels are enough on i.mx7ulp whose M4 domain own some peripherals.
*/
for (i = 0; i < count; i++) {
irq = platform_get_irq(pdev, i);
if (irq < 0)
return -ENXIO;
sprintf(fsl_edma->chans[i].chan_name, "eDMA2-CH%02d", i);
/* The last IRQ is for eDMA err */
if (i == count - 1)
ret = devm_request_irq(&pdev->dev, irq,
fsl_edma_err_handler,
0, "eDMA2-ERR", fsl_edma);
else
ret = devm_request_irq(&pdev->dev, irq,
fsl_edma_tx_handler, 0,
fsl_edma->chans[i].chan_name,
fsl_edma);
if (ret)
return ret;
}
return 0;
}
static void fsl_edma_irq_exit(
struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
{
@ -191,8 +235,16 @@ static struct fsl_edma_drvdata vf610_data = {
.setup_irq = fsl_edma_irq_init,
};
static struct fsl_edma_drvdata imx7ulp_data = {
.version = v3,
.dmamuxs = 1,
.has_dmaclk = true,
.setup_irq = fsl_edma2_irq_init,
};
static const struct of_device_id fsl_edma_dt_ids[] = {
{ .compatible = "fsl,vf610-edma", .data = &vf610_data},
{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids);
@ -240,6 +292,20 @@ static int fsl_edma_probe(struct platform_device *pdev)
fsl_edma_setup_regs(fsl_edma);
regs = &fsl_edma->regs;
if (drvdata->has_dmaclk) {
fsl_edma->dmaclk = devm_clk_get(&pdev->dev, "dma");
if (IS_ERR(fsl_edma->dmaclk)) {
dev_err(&pdev->dev, "Missing DMA block clock.\n");
return PTR_ERR(fsl_edma->dmaclk);
}
ret = clk_prepare_enable(fsl_edma->dmaclk);
if (ret) {
dev_err(&pdev->dev, "DMA clk block failed.\n");
return ret;
}
}
for (i = 0; i < fsl_edma->drvdata->dmamuxs; i++) {
char clkname[32];