spi: sunxi: fix transfer timeout

The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
1MHz SPI bus takes way longer than that. Calculate the timeout from the
actual time the transfer is supposed to take and multiply by 2 for good
measure.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

drivers/spi/spi-sun4i.c

@@ -173,6 +173,7 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 {
 	struct sun4i_spi *sspi = spi_master_get_devdata(master);
 	unsigned int mclk_rate, div, timeout;
+	unsigned int start, end, tx_time;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;
@@ -286,9 +287,16 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
 	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
 
+	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+	start = jiffies;
 	timeout = wait_for_completion_timeout(&sspi->done,
-					      msecs_to_jiffies(1000));
+					      msecs_to_jiffies(tx_time));
+	end = jiffies;
 	if (!timeout) {
+		dev_warn(&master->dev,
+			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+			 jiffies_to_msecs(end - start), tx_time);
 		ret = -ETIMEDOUT;
 		goto out;
 	}

drivers/spi/spi-sun6i.c

@@ -160,6 +160,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 {
 	struct sun6i_spi *sspi = spi_master_get_devdata(master);
 	unsigned int mclk_rate, div, timeout;
+	unsigned int start, end, tx_time;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;
@@ -269,9 +270,16 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
 	sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
 
+	tx_time = max(tfr->len * 8 * 2 / (tfr->speed_hz / 1000), 100U);
+	start = jiffies;
 	timeout = wait_for_completion_timeout(&sspi->done,
-					      msecs_to_jiffies(1000));
+					      msecs_to_jiffies(tx_time));
+	end = jiffies;
 	if (!timeout) {
+		dev_warn(&master->dev,
+			 "%s: timeout transferring %u bytes@%iHz for %i(%i)ms",
+			 dev_name(&spi->dev), tfr->len, tfr->speed_hz,
+			 jiffies_to_msecs(end - start), tx_time);
 		ret = -ETIMEDOUT;
 		goto out;
 	}