scsi: mpt3sas: Add persistent Event trigger page

Trigger Page2 is used to store information about Event triggers: 31 24 23 16 15 8 7 0 Byte ----------------------------------------------- |PageType |PageNumber |Reserved |PageVersion| 0x00 ----------------------------------------------- |Reserved |ExtPageType | ExtPageLength | 0x04 ----------------------------------------------- | Reserved | NumMPIEventTriggers | 0x08 ----------------------------------------------- | MPIEventTriggerEntries | 0x0C | | 0xFC ----------------------------------------------- Number of MPI Event Trigger Entries currently stored in this page. If this is set to zero, there are no valid MPI-Event-Trigger entries available in this page. MPIEventTriggerEntry: - MPIEventCode [15:00] MPI Event code specified in MPI-Spec - MPIEventCodeSpecific [16:31] For Event Code “MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)”, this field specifies the Log-Entry-Qualifier. For all other Event Codes, this field is reserved and not used Maximum of 20-event trigger entries can be stored in this page. Link: https://lore.kernel.org/r/20201126094311.8686-5-suganath-prabu.subramani@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-26 15:13:07 +05:30 · 2020-11-26 15:13:07 +05:30 · 71b3fb8fe6
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@ -4797,6 +4797,57 @@ _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc)
 	}
 }

+/**
+ * _base_get_event_diag_triggers - get event diag trigger values from
+ *				persistent pages
+ * @ioc : per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi26DriverTriggerPage2_t trigger_pg2;
+	struct SL_WH_EVENT_TRIGGER_T *event_tg;
+	MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY *mpi_event_tg;
+	Mpi2ConfigReply_t mpi_reply;
+	int r = 0, i = 0;
+	u16 count = 0;
+	u16 ioc_status;
+
+	r = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply,
+	    &trigger_pg2);
+	if (r)
+		return;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dinitprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		   __func__, ioc_status));
+		return;
+	}
+
+	if (le16_to_cpu(trigger_pg2.NumMPIEventTrigger)) {
+		count = le16_to_cpu(trigger_pg2.NumMPIEventTrigger);
+		count = min_t(u16, NUM_VALID_ENTRIES, count);
+		ioc->diag_trigger_event.ValidEntries = count;
+
+		event_tg = &ioc->diag_trigger_event.EventTriggerEntry[0];
+		mpi_event_tg = &trigger_pg2.MPIEventTriggers[0];
+		for (i = 0; i < count; i++) {
+			event_tg->EventValue = le16_to_cpu(
+			    mpi_event_tg->MPIEventCode);
+			event_tg->LogEntryQualifier = le16_to_cpu(
+			    mpi_event_tg->MPIEventCodeSpecific);
+			event_tg++;
+			mpi_event_tg++;
+		}
+	}
+}
+
 /**
 * _base_get_master_diag_triggers - get master diag trigger values from
 *				persistent pages
@ -4893,6 +4944,15 @@ _base_get_diag_triggers(struct MPT3SAS_ADAPTER *ioc)
 	if ((u16)trigger_flags &
 	    MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID)
 		_base_get_master_diag_triggers(ioc);
+
+	/*
+	 * Retrieve event diag trigger values from driver trigger pg2
+	 * if event trigger bit enabled in TriggerFlags.
+	 */
+	if ((u16)trigger_flags &
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID)
+		_base_get_event_diag_triggers(ioc);
+
 }

 /**
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@ -1826,8 +1826,14 @@ int
 mpt3sas_config_get_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
 	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage1_t *config_page);
 int
+mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page);
+int
 mpt3sas_config_update_driver_trigger_pg1(struct MPT3SAS_ADAPTER *ioc,
 	struct SL_WH_MASTER_TRIGGER_T *master_tg, bool set);
+int
+mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set);

 /* ctl shared API */
 extern struct device_attribute *mpt3sas_host_attrs[];
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@ -2027,6 +2027,166 @@ out:
 	return rc;
 }

+/**
+ * mpt3sas_config_get_driver_trigger_pg2 - obtain driver trigger page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_get_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_set_driver_trigger_pg2 - write driver trigger page 2
+ * @ioc: per adapter object
+ * @mpi_reply: reply mf payload returned from firmware
+ * @config_page: contents of the config page
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+static int
+_config_set_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	Mpi2ConfigReply_t *mpi_reply, Mpi26DriverTriggerPage2_t *config_page)
+{
+	Mpi2ConfigRequest_t mpi_request;
+	int r;
+
+	memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
+	mpi_request.Function = MPI2_FUNCTION_CONFIG;
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
+	mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
+	mpi_request.ExtPageType =
+	    MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER;
+	mpi_request.Header.PageNumber = 2;
+	mpi_request.Header.PageVersion = MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION;
+	ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
+	if (r)
+		goto out;
+
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+	_config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
+	r = _config_request(ioc, &mpi_request, mpi_reply,
+	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
+	    sizeof(*config_page));
+ out:
+	return r;
+}
+
+/**
+ * mpt3sas_config_update_driver_trigger_pg2 - update driver trigger page 2
+ * @ioc: per adapter object
+ * @event_tg: list of Event Triggers
+ * @set: set ot clear trigger values
+ * Context: sleep.
+ *
+ * Returns 0 for success, non-zero for failure.
+ */
+int
+mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc,
+	struct SL_WH_EVENT_TRIGGERS_T *event_tg, bool set)
+{
+	Mpi26DriverTriggerPage2_t tg_pg2;
+	Mpi2ConfigReply_t mpi_reply;
+	int rc, i, count;
+	u16 ioc_status;
+
+	rc = mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, set);
+	if (rc)
+		return rc;
+
+	rc = mpt3sas_config_get_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	if (set) {
+		count = event_tg->ValidEntries;
+		tg_pg2.NumMPIEventTrigger = cpu_to_le16(count);
+		for (i = 0; i < count; i++) {
+			tg_pg2.MPIEventTriggers[i].MPIEventCode =
+			    cpu_to_le16(
+			    event_tg->EventTriggerEntry[i].EventValue);
+			tg_pg2.MPIEventTriggers[i].MPIEventCodeSpecific =
+			    cpu_to_le16(
+			    event_tg->EventTriggerEntry[i].LogEntryQualifier);
+		}
+	} else {
+		tg_pg2.NumMPIEventTrigger = 0;
+		memset(&tg_pg2.MPIEventTriggers[0], 0,
+		    NUM_VALID_ENTRIES * sizeof(
+		    MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY));
+	}
+
+	rc = _config_set_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2);
+	if (rc)
+		goto out;
+
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		dcprintk(ioc,
+		    ioc_err(ioc,
+		    "%s: Failed to get trigger pg2, ioc_status(0x%04x)\n",
+		    __func__, ioc_status));
+		rc = -EFAULT;
+		goto out;
+	}
+
+	return 0;
+
+out:
+	mpt3sas_config_update_driver_trigger_pg0(ioc,
+	    MPI26_DRIVER_TRIGGER0_FLAG_MPI_EVENT_TRIGGER_VALID, !set);
+
+	return rc;
+}
+
 /**
 * mpt3sas_config_get_volume_handle - returns volume handle for give hidden
 * raid components