diff --git a/drivers/input/touchscreen/surface3_spi.c b/drivers/input/touchscreen/surface3_spi.c
index e6cea7ed3d0e..e12fb9b63f31 100644
--- a/drivers/input/touchscreen/surface3_spi.c
+++ b/drivers/input/touchscreen/surface3_spi.c
@@ -27,11 +27,14 @@
 #define SURFACE3_PACKET_SIZE	264
 
 #define SURFACE3_REPORT_TOUCH	0xd2
+#define SURFACE3_REPORT_PEN	0x16
 
 struct surface3_ts_data {
 	struct spi_device *spi;
 	struct gpio_desc *gpiod_rst[2];
 	struct input_dev *input_dev;
+	struct input_dev *pen_input_dev;
+	int pen_tool;
 
 	u8 rd_buf[SURFACE3_PACKET_SIZE]		____cacheline_aligned;
 };
@@ -48,6 +51,14 @@ struct surface3_ts_data_finger {
 	u32 padding;
 } __packed;
 
+struct surface3_ts_data_pen {
+	u8 status;
+	__le16 x;
+	__le16 y;
+	__le16 pressure;
+	u8 padding;
+} __packed;
+
 static int surface3_spi_read(struct surface3_ts_data *ts_data)
 {
 	struct spi_device *spi = ts_data->spi;
@@ -113,6 +124,53 @@ static void surface3_spi_process_touch(struct surface3_ts_data *ts_data, u8 *dat
 	input_sync(ts_data->input_dev);
 }
 
+static void surface3_spi_report_pen(struct surface3_ts_data *ts_data,
+				    struct surface3_ts_data_pen *pen)
+{
+	struct input_dev *dev = ts_data->pen_input_dev;
+	int st = pen->status;
+	int prox = st & 0x01;
+	int rubber = st & 0x18;
+	int tool = (prox && rubber) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+
+	/* fake proximity out to switch tools */
+	if (ts_data->pen_tool != tool) {
+		input_report_key(dev, ts_data->pen_tool, 0);
+		input_sync(dev);
+		ts_data->pen_tool = tool;
+	}
+
+	input_report_key(dev, BTN_TOUCH, st & 0x12);
+
+	input_report_key(dev, ts_data->pen_tool, prox);
+
+	if (st) {
+		input_report_key(dev,
+				 BTN_STYLUS,
+				 st & 0x04);
+
+		input_report_abs(dev,
+				 ABS_X,
+				 get_unaligned_le16(&pen->x));
+		input_report_abs(dev,
+				 ABS_Y,
+				 get_unaligned_le16(&pen->y));
+		input_report_abs(dev,
+				 ABS_PRESSURE,
+				 get_unaligned_le16(&pen->pressure));
+	}
+}
+
+static void surface3_spi_process_pen(struct surface3_ts_data *ts_data, u8 *data)
+{
+	struct surface3_ts_data_pen *pen;
+
+	pen = (struct surface3_ts_data_pen *)&data[15];
+
+	surface3_spi_report_pen(ts_data, pen);
+	input_sync(ts_data->pen_input_dev);
+}
+
 static void surface3_spi_process(struct surface3_ts_data *ts_data)
 {
 	const char header[] = {
@@ -125,12 +183,19 @@ static void surface3_spi_process(struct surface3_ts_data *ts_data)
 			"%s header error: %*ph, ignoring...\n",
 			__func__, (int)sizeof(header), data);
 
-	if (data[9] == SURFACE3_REPORT_TOUCH)
+	switch (data[9]) {
+	case SURFACE3_REPORT_TOUCH:
 		surface3_spi_process_touch(ts_data, data);
-	else
+		break;
+	case SURFACE3_REPORT_PEN:
+		surface3_spi_process_pen(ts_data, data);
+		break;
+	default:
 		dev_err(&ts_data->spi->dev,
 			"%s unknown packet type: %x, ignoring...\n",
 			__func__, data[9]);
+		break;
+	}
 }
 
 static irqreturn_t surface3_spi_irq_handler(int irq, void *dev_id)
@@ -224,6 +289,47 @@ static int surface3_spi_create_touch_input(struct surface3_ts_data *data)
 	return 0;
 }
 
+static int surface3_spi_create_pen_input(struct surface3_ts_data *data)
+{
+	struct input_dev *input;
+	int error;
+
+	input = devm_input_allocate_device(&data->spi->dev);
+	if (!input)
+		return -ENOMEM;
+
+	data->pen_input_dev = input;
+	data->pen_tool = BTN_TOOL_PEN;
+
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
+	__set_bit(INPUT_PROP_POINTER, input->propbit);
+	input_set_abs_params(input, ABS_X, 0, 9600, 0, 0);
+	input_abs_set_res(input, ABS_X, 40);
+	input_set_abs_params(input, ABS_Y, 0, 7200, 0, 0);
+	input_abs_set_res(input, ABS_Y, 48);
+	input_set_abs_params(input, ABS_PRESSURE, 0, 1024, 0, 0);
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_capability(input, EV_KEY, BTN_STYLUS);
+	input_set_capability(input, EV_KEY, BTN_TOOL_PEN);
+	input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER);
+
+	input->name = "Surface3 SPI Pen Input";
+	input->phys = "input/ts";
+	input->id.bustype = BUS_SPI;
+	input->id.vendor = 0x045e;     /* Microsoft */
+	input->id.product = 0x0002;
+	input->id.version = 0x0000;
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&data->spi->dev,
+			"Failed to register input device: %d", error);
+		return error;
+	}
+
+	return 0;
+}
+
 static int surface3_spi_probe(struct spi_device *spi)
 {
 	struct surface3_ts_data *data;
@@ -255,6 +361,10 @@ static int surface3_spi_probe(struct spi_device *spi)
 	if (error)
 		return error;
 
+	error = surface3_spi_create_pen_input(data);
+	if (error)
+		return error;
+
 	error = devm_request_threaded_irq(&spi->dev, spi->irq,
 					  NULL, surface3_spi_irq_handler,
 					  IRQF_ONESHOT,