hwmon: Driver for MAX1668
This patch adds support for MAX1668 and compatible temperature sensors. Signed-off-by: David George <david.george@ska.ac.za> [guenter.roeck@ericsson.com: minor cleanup of probe error path] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This commit is contained in:
David George
Guenter Roeck
Родитель
02f8c6aee8
Коммит
731b4cace1
|
|
@ -0,0 +1,60 @@
|
|||
Kernel driver max1668
|
||||
=====================
|
||||
|
||||
Supported chips:
|
||||
* Maxim MAX1668, MAX1805 and MAX1989
|
||||
Prefix: 'max1668'
|
||||
Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e
|
||||
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf
|
||||
|
||||
Author:
|
||||
David George <david.george@ska.ac.za>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Maxim MAX1668, MAX1805 and MAX1989
|
||||
chips.
|
||||
|
||||
The three devices are very similar, but the MAX1805 has a reduced feature
|
||||
set; only two remote temperature inputs vs the four avaible on the other
|
||||
two ICs.
|
||||
|
||||
The driver is able to distinguish between the devices and creates sysfs
|
||||
entries as follows:
|
||||
|
||||
MAX1805, MAX1668 and MAX1989:
|
||||
|
||||
temp1_input ro local (ambient) temperature
|
||||
temp1_max rw local temperature maximum threshold for alarm
|
||||
temp1_max_alarm ro local temperature maximum threshold alarm
|
||||
temp1_min rw local temperature minimum threshold for alarm
|
||||
temp1_min_alarm ro local temperature minimum threshold alarm
|
||||
temp2_input ro remote temperature 1
|
||||
temp2_max rw remote temperature 1 maximum threshold for alarm
|
||||
temp2_max_alarm ro remote temperature 1 maximum threshold alarm
|
||||
temp2_min rw remote temperature 1 minimum threshold for alarm
|
||||
temp2_min_alarm ro remote temperature 1 minimum threshold alarm
|
||||
temp3_input ro remote temperature 2
|
||||
temp3_max rw remote temperature 2 maximum threshold for alarm
|
||||
temp3_max_alarm ro remote temperature 2 maximum threshold alarm
|
||||
temp3_min rw remote temperature 2 minimum threshold for alarm
|
||||
temp3_min_alarm ro remote temperature 2 minimum threshold alarm
|
||||
|
||||
MAX1668 and MAX1989 only:
|
||||
temp4_input ro remote temperature 3
|
||||
temp4_max rw remote temperature 3 maximum threshold for alarm
|
||||
temp4_max_alarm ro remote temperature 3 maximum threshold alarm
|
||||
temp4_min rw remote temperature 3 minimum threshold for alarm
|
||||
temp4_min_alarm ro remote temperature 3 minimum threshold alarm
|
||||
temp5_input ro remote temperature 4
|
||||
temp5_max rw remote temperature 4 maximum threshold for alarm
|
||||
temp5_max_alarm ro remote temperature 4 maximum threshold alarm
|
||||
temp5_min rw remote temperature 4 minimum threshold for alarm
|
||||
temp5_min_alarm ro remote temperature 4 minimum threshold alarm
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
* read_only: int
|
||||
Set to non-zero if you wish to prevent write access to alarm thresholds.
|
||||
|
|
@ -4120,6 +4120,13 @@ S: Orphan
|
|||
F: drivers/video/matrox/matroxfb_*
|
||||
F: include/linux/matroxfb.h
|
||||
|
||||
MAX1668 TEMPERATURE SENSOR DRIVER
|
||||
M: "David George" <david.george@ska.ac.za>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/max1668
|
||||
F: drivers/hwmon/max1668.c
|
||||
|
||||
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
|
||||
M: "Hans J. Koch" <hjk@hansjkoch.de>
|
||||
L: lm-sensors@lm-sensors.org
|
||||
|
|
|
|||
|
|
@ -736,6 +736,16 @@ config SENSORS_MAX1619
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called max1619.
|
||||
|
||||
config SENSORS_MAX1668
|
||||
tristate "Maxim MAX1668 and compatibles"
|
||||
depends on I2C && EXPERIMENTAL
|
||||
help
|
||||
If you say yes here you get support for MAX1668, MAX1989 and
|
||||
MAX1805 chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called max1668.
|
||||
|
||||
config SENSORS_MAX6639
|
||||
tristate "Maxim MAX6639 sensor chip"
|
||||
depends on I2C && EXPERIMENTAL
|
||||
|
|
|
|||
|
|
@ -87,6 +87,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o
|
|||
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
|
||||
obj-$(CONFIG_SENSORS_MAX16065) += max16065.o
|
||||
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
|
||||
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
|
||||
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
|
||||
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
|
||||
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,480 @@
|
|||
/*
|
||||
Copyright (c) 2011 David George <david.george@ska.ac.za>
|
||||
|
||||
based on adm1021.c
|
||||
some credit to Christoph Scheurer, but largely a rewrite
|
||||
|
||||
This program is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program; if not, write to the Free Software
|
||||
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/mutex.h>
|
||||
|
||||
/* Addresses to scan */
|
||||
static unsigned short max1668_addr_list[] = {
|
||||
0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
|
||||
|
||||
/* max1668 registers */
|
||||
|
||||
#define MAX1668_REG_TEMP(nr) (nr)
|
||||
#define MAX1668_REG_STAT1 0x05
|
||||
#define MAX1668_REG_STAT2 0x06
|
||||
#define MAX1668_REG_MAN_ID 0xfe
|
||||
#define MAX1668_REG_DEV_ID 0xff
|
||||
|
||||
/* limits */
|
||||
|
||||
/* write high limits */
|
||||
#define MAX1668_REG_LIMH_WR(nr) (0x13 + 2 * (nr))
|
||||
/* write low limits */
|
||||
#define MAX1668_REG_LIML_WR(nr) (0x14 + 2 * (nr))
|
||||
/* read high limits */
|
||||
#define MAX1668_REG_LIMH_RD(nr) (0x08 + 2 * (nr))
|
||||
/* read low limits */
|
||||
#define MAX1668_REG_LIML_RD(nr) (0x09 + 2 * (nr))
|
||||
|
||||
/* manufacturer and device ID Constants */
|
||||
#define MAN_ID_MAXIM 0x4d
|
||||
#define DEV_ID_MAX1668 0x3
|
||||
#define DEV_ID_MAX1805 0x5
|
||||
#define DEV_ID_MAX1989 0xb
|
||||
|
||||
/* read only mode module parameter */
|
||||
static int read_only;
|
||||
module_param(read_only, bool, 0);
|
||||
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
|
||||
|
||||
enum chips { max1668, max1805, max1989 };
|
||||
|
||||
struct max1668_data {
|
||||
struct device *hwmon_dev;
|
||||
enum chips type;
|
||||
|
||||
struct mutex update_lock;
|
||||
char valid; /* !=0 if following fields are valid */
|
||||
unsigned long last_updated; /* In jiffies */
|
||||
|
||||
/* 1x local and 4x remote */
|
||||
s8 temp_max[5];
|
||||
s8 temp_min[5];
|
||||
s8 temp[5];
|
||||
u16 alarms;
|
||||
};
|
||||
|
||||
static struct max1668_data *max1668_update_device(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct max1668_data *data = i2c_get_clientdata(client);
|
||||
struct max1668_data *ret = data;
|
||||
s32 val;
|
||||
int i;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (data->valid && !time_after(jiffies,
|
||||
data->last_updated + HZ + HZ / 2))
|
||||
goto abort;
|
||||
|
||||
for (i = 0; i < 5; i++) {
|
||||
val = i2c_smbus_read_byte_data(client, MAX1668_REG_TEMP(i));
|
||||
if (unlikely(val < 0)) {
|
||||
ret = ERR_PTR(val);
|
||||
goto abort;
|
||||
}
|
||||
data->temp[i] = (s8) val;
|
||||
|
||||
val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIMH_RD(i));
|
||||
if (unlikely(val < 0)) {
|
||||
ret = ERR_PTR(val);
|
||||
goto abort;
|
||||
}
|
||||
data->temp_max[i] = (s8) val;
|
||||
|
||||
val = i2c_smbus_read_byte_data(client, MAX1668_REG_LIML_RD(i));
|
||||
if (unlikely(val < 0)) {
|
||||
ret = ERR_PTR(val);
|
||||
goto abort;
|
||||
}
|
||||
data->temp_min[i] = (s8) val;
|
||||
}
|
||||
|
||||
val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT1);
|
||||
if (unlikely(val < 0)) {
|
||||
ret = ERR_PTR(val);
|
||||
goto abort;
|
||||
}
|
||||
data->alarms &= 0x00ff;
|
||||
data->alarms |= ((u8) (val & 0x60)) << 8;
|
||||
|
||||
val = i2c_smbus_read_byte_data(client, MAX1668_REG_STAT2);
|
||||
if (unlikely(val < 0)) {
|
||||
ret = ERR_PTR(val);
|
||||
goto abort;
|
||||
}
|
||||
data->alarms &= 0xff00;
|
||||
data->alarms |= ((u8) val);
|
||||
|
||||
data->last_updated = jiffies;
|
||||
data->valid = 1;
|
||||
abort:
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static ssize_t show_temp(struct device *dev,
|
||||
struct device_attribute *devattr, char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct max1668_data *data = max1668_update_device(dev);
|
||||
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
return sprintf(buf, "%d\n", data->temp[index] * 1000);
|
||||
}
|
||||
|
||||
static ssize_t show_temp_max(struct device *dev,
|
||||
struct device_attribute *devattr, char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct max1668_data *data = max1668_update_device(dev);
|
||||
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
return sprintf(buf, "%d\n", data->temp_max[index] * 1000);
|
||||
}
|
||||
|
||||
static ssize_t show_temp_min(struct device *dev,
|
||||
struct device_attribute *devattr, char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct max1668_data *data = max1668_update_device(dev);
|
||||
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
return sprintf(buf, "%d\n", data->temp_min[index] * 1000);
|
||||
}
|
||||
|
||||
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(attr)->index;
|
||||
struct max1668_data *data = max1668_update_device(dev);
|
||||
|
||||
if (IS_ERR(data))
|
||||
return PTR_ERR(data);
|
||||
|
||||
return sprintf(buf, "%u\n", (data->alarms >> index) & 0x1);
|
||||
}
|
||||
|
||||
static ssize_t set_temp_max(struct device *dev,
|
||||
struct device_attribute *devattr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct max1668_data *data = i2c_get_clientdata(client);
|
||||
long temp;
|
||||
int ret;
|
||||
|
||||
ret = kstrtol(buf, 10, &temp);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->temp_max[index] = SENSORS_LIMIT(temp/1000, -128, 127);
|
||||
if (i2c_smbus_write_byte_data(client,
|
||||
MAX1668_REG_LIMH_WR(index),
|
||||
data->temp_max[index]))
|
||||
count = -EIO;
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t set_temp_min(struct device *dev,
|
||||
struct device_attribute *devattr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct max1668_data *data = i2c_get_clientdata(client);
|
||||
long temp;
|
||||
int ret;
|
||||
|
||||
ret = kstrtol(buf, 10, &temp);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->temp_min[index] = SENSORS_LIMIT(temp/1000, -128, 127);
|
||||
if (i2c_smbus_write_byte_data(client,
|
||||
MAX1668_REG_LIML_WR(index),
|
||||
data->temp_max[index]))
|
||||
count = -EIO;
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
||||
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max,
|
||||
set_temp_max, 0);
|
||||
static SENSOR_DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min,
|
||||
set_temp_min, 0);
|
||||
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max,
|
||||
set_temp_max, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp2_min, S_IRUGO, show_temp_min,
|
||||
set_temp_min, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max,
|
||||
set_temp_max, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO, show_temp_min,
|
||||
set_temp_min, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
|
||||
static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max,
|
||||
set_temp_max, 3);
|
||||
static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO, show_temp_min,
|
||||
set_temp_min, 3);
|
||||
static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
|
||||
static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max,
|
||||
set_temp_max, 4);
|
||||
static SENSOR_DEVICE_ATTR(temp5_min, S_IRUGO, show_temp_min,
|
||||
set_temp_min, 4);
|
||||
|
||||
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 14);
|
||||
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 13);
|
||||
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 7);
|
||||
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 6);
|
||||
static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 5);
|
||||
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 4);
|
||||
static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_alarm, NULL, 3);
|
||||
static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_alarm, NULL, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp5_min_alarm, S_IRUGO, show_alarm, NULL, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp5_max_alarm, S_IRUGO, show_alarm, NULL, 0);
|
||||
|
||||
/* Attributes common to MAX1668, MAX1989 and MAX1805 */
|
||||
static struct attribute *max1668_attribute_common[] = {
|
||||
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
||||
|
||||
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
/* Attributes not present on MAX1805 */
|
||||
static struct attribute *max1668_attribute_unique[] = {
|
||||
&sensor_dev_attr_temp4_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp4_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp5_max.dev_attr.attr,
|
||||
&sensor_dev_attr_temp5_min.dev_attr.attr,
|
||||
&sensor_dev_attr_temp5_input.dev_attr.attr,
|
||||
|
||||
&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
|
||||
&sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static mode_t max1668_attribute_mode(struct kobject *kobj,
|
||||
struct attribute *attr, int index)
|
||||
{
|
||||
int ret = S_IRUGO;
|
||||
if (read_only)
|
||||
return ret;
|
||||
if (attr == &sensor_dev_attr_temp1_max.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp2_max.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp3_max.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp4_max.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp5_max.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp1_min.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp2_min.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp3_min.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp4_min.dev_attr.attr ||
|
||||
attr == &sensor_dev_attr_temp5_min.dev_attr.attr)
|
||||
ret |= S_IWUSR;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct attribute_group max1668_group_common = {
|
||||
.attrs = max1668_attribute_common,
|
||||
.is_visible = max1668_attribute_mode
|
||||
};
|
||||
|
||||
static const struct attribute_group max1668_group_unique = {
|
||||
.attrs = max1668_attribute_unique,
|
||||
.is_visible = max1668_attribute_mode
|
||||
};
|
||||
|
||||
/* Return 0 if detection is successful, -ENODEV otherwise */
|
||||
static int max1668_detect(struct i2c_client *client,
|
||||
struct i2c_board_info *info)
|
||||
{
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
const char *type_name;
|
||||
int man_id, dev_id;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
/* Check for unsupported part */
|
||||
man_id = i2c_smbus_read_byte_data(client, MAX1668_REG_MAN_ID);
|
||||
if (man_id != MAN_ID_MAXIM)
|
||||
return -ENODEV;
|
||||
|
||||
dev_id = i2c_smbus_read_byte_data(client, MAX1668_REG_DEV_ID);
|
||||
if (dev_id < 0)
|
||||
return -ENODEV;
|
||||
|
||||
type_name = NULL;
|
||||
if (dev_id == DEV_ID_MAX1668)
|
||||
type_name = "max1668";
|
||||
else if (dev_id == DEV_ID_MAX1805)
|
||||
type_name = "max1805";
|
||||
else if (dev_id == DEV_ID_MAX1989)
|
||||
type_name = "max1989";
|
||||
|
||||
if (!type_name)
|
||||
return -ENODEV;
|
||||
|
||||
strlcpy(info->type, type_name, I2C_NAME_SIZE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max1668_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
struct max1668_data *data;
|
||||
int err;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
data = kzalloc(sizeof(struct max1668_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, data);
|
||||
data->type = id->driver_data;
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
/* Register sysfs hooks */
|
||||
err = sysfs_create_group(&client->dev.kobj, &max1668_group_common);
|
||||
if (err)
|
||||
goto error_free;
|
||||
|
||||
if (data->type == max1668 || data->type == max1989) {
|
||||
err = sysfs_create_group(&client->dev.kobj,
|
||||
&max1668_group_unique);
|
||||
if (err)
|
||||
goto error_sysrem0;
|
||||
}
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
err = PTR_ERR(data->hwmon_dev);
|
||||
goto error_sysrem1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
error_sysrem1:
|
||||
if (data->type == max1668 || data->type == max1989)
|
||||
sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
|
||||
error_sysrem0:
|
||||
sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
|
||||
error_free:
|
||||
kfree(data);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int max1668_remove(struct i2c_client *client)
|
||||
{
|
||||
struct max1668_data *data = i2c_get_clientdata(client);
|
||||
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
if (data->type == max1668 || data->type == max1989)
|
||||
sysfs_remove_group(&client->dev.kobj, &max1668_group_unique);
|
||||
|
||||
sysfs_remove_group(&client->dev.kobj, &max1668_group_common);
|
||||
|
||||
kfree(data);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max1668_id[] = {
|
||||
{ "max1668", max1668 },
|
||||
{ "max1805", max1805 },
|
||||
{ "max1989", max1989 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max1668_id);
|
||||
|
||||
/* This is the driver that will be inserted */
|
||||
static struct i2c_driver max1668_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "max1668",
|
||||
},
|
||||
.probe = max1668_probe,
|
||||
.remove = max1668_remove,
|
||||
.id_table = max1668_id,
|
||||
.detect = max1668_detect,
|
||||
.address_list = max1668_addr_list,
|
||||
};
|
||||
|
||||
static int __init sensors_max1668_init(void)
|
||||
{
|
||||
return i2c_add_driver(&max1668_driver);
|
||||
}
|
||||
|
||||
static void __exit sensors_max1668_exit(void)
|
||||
{
|
||||
i2c_del_driver(&max1668_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("David George <david.george@ska.ac.za>");
|
||||
MODULE_DESCRIPTION("MAX1668 remote temperature sensor driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(sensors_max1668_init)
|
||||
module_exit(sensors_max1668_exit)
|
||||
Загрузка…
Ссылка в новой задаче