drm/i915: Add support for interlaced display.

This doesn't change the clock limits (minimums), i.e. it won't make it
output 720x576 PAL nor 720x480 NTSC, but it will work with modes like
1080i etc. (including GLX and textured Xvideo, not sure about the
overlay).

Tested on i915 + analog VGA, it would be worth checking if newer chips
(and which ones) still support interlaced mode.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Eric Anholt <eric@anholt.net>
This commit is contained in:
Krzysztof Halasa 2010-05-25 18:41:46 +02:00 коммит произвёл Eric Anholt
Родитель f953c9353f
Коммит 734b4157b3
2 изменённых файлов: 15 добавлений и 1 удалений

Просмотреть файл

@ -569,7 +569,7 @@ void intel_crt_init(struct drm_device *dev)
(1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);

Просмотреть файл

@ -2354,6 +2354,8 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
if (mode->clock * 3 > 27000 * 4)
return MODE_CLOCK_HIGH;
}
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}
@ -3781,6 +3783,18 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
}
}
if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
/* the chip adds 2 halflines automatically */
adjusted_mode->crtc_vdisplay -= 1;
adjusted_mode->crtc_vtotal -= 1;
adjusted_mode->crtc_vblank_start -= 1;
adjusted_mode->crtc_vblank_end -= 1;
adjusted_mode->crtc_vsync_end -= 1;
adjusted_mode->crtc_vsync_start -= 1;
} else
pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */
I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
((adjusted_mode->crtc_htotal - 1) << 16));
I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |