From 734b5aa911dc65f4563048f069dfc631c9aa7de7 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 15 Jul 2008 13:07:16 -0400 Subject: [PATCH] ath5k: use positive logic for HP laptop LEDs Helge Deller reports that HP laptops (NC4010 and NC6000) use active- high signals to turn on the LEDs. Previous code used active-low for all devices. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 7273e9f5c6d5..359795d8b482 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2581,8 +2581,6 @@ ath5k_init_leds(struct ath5k_softc *sc) struct pci_dev *pdev = sc->pdev; char name[ATH5K_LED_MAX_NAME_LEN + 1]; - sc->led_on = 0; /* active low */ - /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. @@ -2591,11 +2589,13 @@ ath5k_init_leds(struct ath5k_softc *sc) pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 0; + sc->led_on = 0; /* active low */ } /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 1; + sc->led_on = 1; /* active high */ } if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) goto out;