arm64: tegra: Device tree changes for v4.9-rc1

Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
 Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
 with the DPAUX to be used to access various audio devices. Furthermore,
 enable the XUSB controller on Smaug for USB 3.0 support.
 
 Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
 devices are probed only after their power partitions have been enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJX0tItExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6Em
 MRAAk1aMxkF0C3As4MDVK9F0fZpSgC6bUJE4d4HXEp6wklIgM8FPC4zPiBEGrkC/
 hGeDjCPNdyloE/Uv2FYIQMOBlQRSHYvFR928syTgAIpdTIVL9JDuMSSkWQM+x6Io
 E9+ydyVVDTqZHlkSP24uRIuWlLLjYg5hgT4jV8PsrVhitxzj9x9cuV+qP/mhIV94
 pnizwuGAZ1dzFFAbkJk66a5mcO3aTIRqzLd5HnfCwx7DGHyl62jmdeY90xxivndC
 VoF8Ez8dWQYKl1UtL3g2Ia3KqKfr+XbBJGmxa4JkEENm06f9XQrdwZNfqWRcDFrl
 LdpcdVp5Jnq9YBmoBOXm25+gIhF0h5Hk7at1/X8CZ3X6TuRhtEhdxJbvZZT2syKF
 55WvdV6jqZrAqxInNgLuvikQzWpIJ08JD6KeTo2umxB1MGZcXkxiarHVZRnIBUni
 qOcVAA4WEmJh4C3Hc0WKPFgqagbAnIqW1sPzxycqjBufd3TEqykuyXVHlTnZYZB7
 dZIyWRXgOoRbCD2Xx1lVe6Vimq0XeUYqWf6y6iqf7bHaFzUMuhWnRQDiPGFn3qkO
 7lc/fb+odhKeXMtFhVJ5m1RxObWExVle0N3ThmUOlyM1dWxxdVkwwodP+/Id/+Bt
 E5NQiCUTrcGz1E8zEJJxcr6MqnJYeAnrXK28Hshj/DCeKiw=
 =RrBi
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64

Pull "arm64: tegra: Device tree changes for v4.9-rc1" from Thierry Reding:

Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on
Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads
with the DPAUX to be used to access various audio devices. Furthermore,
enable the XUSB controller on Smaug for USB 3.0 support.

Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure
devices are probed only after their power partitions have been enabled.

* tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Select PM_GENERIC_DOMAINS
  arm64: tegra: Enable XUSB controller on Tegra210 Smaug
  arm64: tegra: Add the various audio devices for Tegra210 Smaug
  arm64: tegra: Enable DPAUX for Tegra210 Smaug
  arm64: tegra: Add ACONNECT, ADMA and AGIC nodes Tegra210 Smaug
  arm64: tegra: Add SOR power-domain for Tegra210
  arm64: tegra: Add ADMA node for Tegra210
  arm64: tegra: Add AGIC node for Tegra210
  arm64: tegra: Drop clock and reset names for XUSB powergates
  arm64: tegra: Simplify Tegra210 GPIO compatible value
This commit is contained in:
Arnd Bergmann 2016-09-14 17:26:34 +02:00
Родитель 291e287b97 988232412e
Коммит 736ad004f8
3 изменённых файлов: 194 добавлений и 7 удалений

Просмотреть файл

@ -161,6 +161,8 @@ config ARCH_TEGRA
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RESET_CONTROLLER
help
This enables support for the NVIDIA Tegra SoC family.

Просмотреть файл

@ -27,6 +27,12 @@
reg = <0x0 0x80000000 0x0 0xc0000000>;
};
host1x@50000000 {
dpaux: dpaux@545c0000 {
status = "okay";
};
};
pinmux: pinmux@700008d4 {
pinctrl-names = "boot";
pinctrl-0 = <&state_boot>;
@ -1556,6 +1562,46 @@
};
};
i2c@7000d100 {
status = "okay";
clock-frequency = <400000>;
nau8825@1a {
compatible = "nuvoton,nau8825";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>;
clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>;
clock-names = "mclk";
nuvoton,jkdet-enable;
nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
nuvoton,vref-impedance = <2>;
nuvoton,micbias-voltage = <6>;
nuvoton,sar-threshold-num = <4>;
nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
nuvoton,sar-hysteresis = <1>;
nuvoton,sar-voltage = <0>;
nuvoton,sar-compare-time = <0>;
nuvoton,sar-sampling-time = <0>;
nuvoton,short-key-debounce = <2>;
nuvoton,jack-insert-debounce = <7>;
nuvoton,jack-eject-debounce = <7>;
status = "okay";
};
audio-codec@2d {
compatible = "realtek,rt5677";
reg = <0x2d>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>;
realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>;
gpio-controller;
#gpio-cells = <2>;
status = "okay";
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <0>;
@ -1568,12 +1614,81 @@
status = "okay";
};
usb@70090000 {
phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
phy-names = "usb2-0", "usb3-0";
dvddio-pex-supply = <&avddio_1v05>;
hvddio-pex-supply = <&pp1800>;
avdd-usb-supply = <&pp3300>;
avdd-pll-utmip-supply = <&pp1800>;
avdd-pll-uerefe-supply = <&pp1050_avdd>;
dvdd-pex-pll-supply = <&avddio_1v05>;
hvdd-pex-pll-e-supply = <&pp1800>;
status = "okay";
};
padctl@7009f000 {
status = "okay";
pads {
usb2 {
status = "okay";
lanes {
usb2-0 {
nvidia,function = "xusb";
status = "okay";
};
};
};
pcie {
status = "okay";
lanes {
pcie-6 {
nvidia,function = "usb3-ss";
status = "okay";
};
};
};
};
ports {
usb2-0 {
status = "okay";
vbus-supply = <&usbc_vbus>;
mode = "otg";
};
usb3-0 {
nvidia,usb2-companion = <0>;
status = "okay";
};
};
};
sdhci@700b0600 {
bus-width = <8>;
non-removable;
status = "okay";
};
aconnect@702c0000 {
status = "okay";
dma@702e2000 {
status = "okay";
};
agic@702f9000 {
status = "okay";
};
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@ -1646,6 +1761,11 @@
};
};
max98357a {
compatible = "maxim,max98357a";
status = "okay";
};
psci {
compatible = "arm,psci-1.0";
method = "smc";

Просмотреть файл

@ -34,6 +34,7 @@
clock-names = "dpaux", "parent";
resets = <&tegra_car 207>;
reset-names = "dpaux";
power-domains = <&pd_sor>;
status = "disabled";
state_dpaux1_aux: pinmux-aux {
@ -108,6 +109,7 @@
clock-names = "dsi", "lp", "parent";
resets = <&tegra_car 48>;
reset-names = "dsi";
power-domains = <&pd_sor>;
nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
status = "disabled";
@ -137,6 +139,7 @@
clock-names = "dsi", "lp", "parent";
resets = <&tegra_car 82>;
reset-names = "dsi";
power-domains = <&pd_sor>;
nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
status = "disabled";
@ -178,6 +181,7 @@
pinctrl-1 = <&state_dpaux_i2c>;
pinctrl-2 = <&state_dpaux_off>;
pinctrl-names = "aux", "i2c", "off";
power-domains = <&pd_sor>;
status = "disabled";
};
@ -197,6 +201,7 @@
pinctrl-1 = <&state_dpaux1_i2c>;
pinctrl-2 = <&state_dpaux1_off>;
pinctrl-names = "aux", "i2c", "off";
power-domains = <&pd_sor>;
status = "disabled";
};
@ -209,6 +214,7 @@
clock-names = "dpaux", "parent";
resets = <&tegra_car 181>;
reset-names = "dpaux";
power-domains = <&pd_sor>;
status = "disabled";
state_dpaux_aux: pinmux-aux {
@ -325,7 +331,7 @@
};
gpio: gpio@6000d000 {
compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio";
reg = <0x0 0x6000d000 0x0 0x1000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
@ -648,27 +654,41 @@
#power-domain-cells = <0>;
};
pd_sor: sor {
clocks = <&tegra_car TEGRA210_CLK_SOR0>,
<&tegra_car TEGRA210_CLK_SOR1>,
<&tegra_car TEGRA210_CLK_CSI>,
<&tegra_car TEGRA210_CLK_DSIA>,
<&tegra_car TEGRA210_CLK_DSIB>,
<&tegra_car TEGRA210_CLK_DPAUX>,
<&tegra_car TEGRA210_CLK_DPAUX1>,
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
resets = <&tegra_car TEGRA210_CLK_SOR0>,
<&tegra_car TEGRA210_CLK_SOR1>,
<&tegra_car TEGRA210_CLK_CSI>,
<&tegra_car TEGRA210_CLK_DSIA>,
<&tegra_car TEGRA210_CLK_DSIB>,
<&tegra_car TEGRA210_CLK_DPAUX>,
<&tegra_car TEGRA210_CLK_DPAUX1>,
<&tegra_car TEGRA210_CLK_MIPI_CAL>;
#power-domain-cells = <0>;
};
pd_xusbss: xusba {
clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
clock-names = "xusb-ss";
resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
reset-names = "xusb-ss";
#power-domain-cells = <0>;
};
pd_xusbdev: xusbb {
clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>;
clock-names = "xusb-dev";
resets = <&tegra_car 95>;
reset-names = "xusb-dev";
#power-domain-cells = <0>;
};
pd_xusbhost: xusbc {
clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
clock-names = "xusb-host";
resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>;
reset-names = "xusb-host";
#power-domain-cells = <0>;
};
};
@ -948,6 +968,7 @@
reg = <0x0 0x700e3000 0x0 0x100>;
clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
clock-names = "mipi-cal";
power-domains = <&pd_sor>;
#nvidia,mipi-calibrate-cells = <1>;
};
@ -961,6 +982,50 @@
#size-cells = <1>;
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
status = "disabled";
adma: dma@702e2000 {
compatible = "nvidia,tegra210-adma";
reg = <0x702e2000 0x2000>;
interrupt-parent = <&agic>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
clock-names = "d_audio";
status = "disabled";
};
agic: agic@702f9000 {
compatible = "nvidia,tegra210-agic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x702f9000 0x2000>,
<0x702fa000 0x2000>;
interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&tegra_car TEGRA210_CLK_APE>;
clock-names = "clk";
status = "disabled";
};
};
spi@70410000 {