microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

MIPS: Loongson32: Fix PHY-mode being left unspecified 

[ Upstream commit e9f3f8f488 ]

commit 0060c87833 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.

Fixes: 0060c87833 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Serge Semin 2022-09-12 00:10:09 +08:00 коммит произвёл Greg Kroah-Hartman
Родитель abea65fa77
Коммит 7400e2edfc
1 изменённых файлов: 8 добавлений и 8 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

16
arch/mips/loongson32/common/platform.c
Просмотреть файл

@ -98,7 +98,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
if (plat_dat->bus_id) {
__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
GMAC1_USE_UART0, LS1X_MUX_CTRL0);
switch (plat_dat->interface) {
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
break;
@ -107,12 +107,12 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC1_SHUT;
} else {
switch (plat_dat->interface) {
switch (plat_dat->phy_interface) {
case PHY_INTERFACE_MODE_RGMII:
val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
break;
@ -121,7 +121,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
break;
default:
pr_err("unsupported mii mode %d\n",
plat_dat->interface);
plat_dat->phy_interface);
return -ENOTSUPP;
}
val &= ~GMAC0_SHUT;
@ -131,7 +131,7 @@ int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
plat_dat = dev_get_platdata(&pdev->dev);
val &= ~PHY_INTF_SELI;
if (plat_dat->interface == PHY_INTERFACE_MODE_RMII)
if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
val |= 0x4 << PHY_INTF_SELI_SHIFT;
__raw_writel(val, LS1X_MUX_CTRL1);
@ -146,9 +146,9 @@ static struct plat_stmmacenet_data ls1x_eth0_pdata = {
.bus_id = 0,
.phy_addr = -1,
#if defined(CONFIG_LOONGSON1_LS1B)
.interface = PHY_INTERFACE_MODE_MII,
.phy_interface = PHY_INTERFACE_MODE_MII,
#elif defined(CONFIG_LOONGSON1_LS1C)
.interface = PHY_INTERFACE_MODE_RMII,
.phy_interface = PHY_INTERFACE_MODE_RMII,
#endif
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
@ -186,7 +186,7 @@ struct platform_device ls1x_eth0_pdev = {
static struct plat_stmmacenet_data ls1x_eth1_pdata = {
.bus_id = 1,
.phy_addr = -1,
.interface = PHY_INTERFACE_MODE_MII,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mdio_bus_data = &ls1x_mdio_bus_data,
.dma_cfg = &ls1x_eth_dma_cfg,
.has_gmac = 1,