[PATCH] USB: move handoff code
This moves the PCI quirk handling for USB host controllers from the PCI directory to the USB directory. Follow-on patches will need to: (a) merge these copies with the originals in the HCD reset methods. they don't wholly agree, despite doing the very same thing; and (b) eventually change it so "usb-handoff" is the default, to help get more robust USB/BIOS/input/... interactions. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/Makefile | 2 drivers/pci/quirks.c | 253 --------------------------------------- drivers/usb/Makefile | 1 drivers/usb/host/Makefile | 5 drivers/usb/host/pci-quirks.c | 272 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 280 insertions(+), 253 deletions(-)
This commit is contained in:
David Brownell
Greg Kroah-Hartman
Родитель
38ffdd62b0
Коммит
7586269c0b
|
|
@ -5,7 +5,7 @@
|
|||
# Rewritten to use lists instead of if-statements.
|
||||
#
|
||||
|
||||
obj-$(CONFIG_PCI) += pci/
|
||||
obj-$(CONFIG_PCI) += pci/ usb/
|
||||
obj-$(CONFIG_PARISC) += parisc/
|
||||
obj-y += video/
|
||||
obj-$(CONFIG_ACPI) += acpi/
|
||||
|
|
|
|||
|
|
@ -7,6 +7,9 @@
|
|||
*
|
||||
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
|
||||
*
|
||||
* Init/reset quirks for USB host controllers should be in the
|
||||
* USB quirks file, where their drivers can access reuse it.
|
||||
*
|
||||
* The bridge optimization stuff has been removed. If you really
|
||||
* have a silly BIOS which is unable to set your host bridge right,
|
||||
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
|
||||
|
|
@ -644,28 +647,6 @@ static void quirk_via_irq(struct pci_dev *dev)
|
|||
}
|
||||
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
|
||||
|
||||
/*
|
||||
* PIIX3 USB: We have to disable USB interrupts that are
|
||||
* hardwired to PIRQD# and may be shared with an
|
||||
* external device.
|
||||
*
|
||||
* Legacy Support Register (LEGSUP):
|
||||
* bit13: USB PIRQ Enable (USBPIRQDEN),
|
||||
* bit4: Trap/SMI On IRQ Enable (USBSMIEN).
|
||||
*
|
||||
* We mask out all r/wc bits, too.
|
||||
*/
|
||||
static void __devinit quirk_piix3_usb(struct pci_dev *dev)
|
||||
{
|
||||
u16 legsup;
|
||||
|
||||
pci_read_config_word(dev, 0xc0, &legsup);
|
||||
legsup &= 0x50ef;
|
||||
pci_write_config_word(dev, 0xc0, legsup);
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
|
||||
|
||||
/*
|
||||
* VIA VT82C598 has its device ID settable and many BIOSes
|
||||
* set it to the ID of VT82C597 for backward compatibility.
|
||||
|
|
@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
|
|||
pci_read_config_byte(dev, 0x77, &val);
|
||||
}
|
||||
|
||||
|
||||
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
|
||||
#define UHCI_USBCMD 0 /* command register */
|
||||
#define UHCI_USBSTS 2 /* status register */
|
||||
#define UHCI_USBINTR 4 /* interrupt register */
|
||||
#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
|
||||
#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
|
||||
#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
|
||||
#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
|
||||
#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
|
||||
|
||||
#define OHCI_CONTROL 0x04
|
||||
#define OHCI_CMDSTATUS 0x08
|
||||
#define OHCI_INTRSTATUS 0x0c
|
||||
#define OHCI_INTRENABLE 0x10
|
||||
#define OHCI_INTRDISABLE 0x14
|
||||
#define OHCI_OCR (1 << 3) /* ownership change request */
|
||||
#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
|
||||
#define OHCI_INTR_OC (1 << 30) /* ownership change */
|
||||
|
||||
#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
|
||||
#define EHCI_USBCMD 0 /* command register */
|
||||
#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
|
||||
#define EHCI_USBSTS 4 /* status register */
|
||||
#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
|
||||
#define EHCI_USBINTR 8 /* interrupt register */
|
||||
#define EHCI_USBLEGSUP 0 /* legacy support register */
|
||||
#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
|
||||
#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
|
||||
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
|
||||
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
|
||||
|
||||
int usb_early_handoff __devinitdata = 0;
|
||||
static int __init usb_handoff_early(char *str)
|
||||
{
|
||||
usb_early_handoff = 1;
|
||||
return 0;
|
||||
}
|
||||
__setup("usb-handoff", usb_handoff_early);
|
||||
|
||||
static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
|
||||
{
|
||||
unsigned long base = 0;
|
||||
int wait_time, delta;
|
||||
u16 val, sts;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < PCI_ROM_RESOURCE; i++)
|
||||
if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
|
||||
base = pci_resource_start(pdev, i);
|
||||
break;
|
||||
}
|
||||
|
||||
if (!base)
|
||||
return;
|
||||
|
||||
/*
|
||||
* stop controller
|
||||
*/
|
||||
sts = inw(base + UHCI_USBSTS);
|
||||
val = inw(base + UHCI_USBCMD);
|
||||
val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
|
||||
outw(val, base + UHCI_USBCMD);
|
||||
|
||||
/*
|
||||
* wait while it stops if it was running
|
||||
*/
|
||||
if ((sts & UHCI_USBSTS_HALTED) == 0)
|
||||
{
|
||||
wait_time = 1000;
|
||||
delta = 100;
|
||||
|
||||
do {
|
||||
outw(0x1f, base + UHCI_USBSTS);
|
||||
udelay(delta);
|
||||
wait_time -= delta;
|
||||
val = inw(base + UHCI_USBSTS);
|
||||
if (val & UHCI_USBSTS_HALTED)
|
||||
break;
|
||||
} while (wait_time > 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* disable interrupts & legacy support
|
||||
*/
|
||||
outw(0, base + UHCI_USBINTR);
|
||||
outw(0x1f, base + UHCI_USBSTS);
|
||||
pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
|
||||
if (val & 0xbf)
|
||||
pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
|
||||
|
||||
}
|
||||
|
||||
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
||||
{
|
||||
void __iomem *base;
|
||||
int wait_time;
|
||||
|
||||
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
||||
pci_resource_len(pdev, 0));
|
||||
if (base == NULL) return;
|
||||
|
||||
if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
|
||||
wait_time = 500; /* 0.5 seconds */
|
||||
writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
|
||||
writel(OHCI_OCR, base + OHCI_CMDSTATUS);
|
||||
while (wait_time > 0 &&
|
||||
readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
|
||||
wait_time -= 10;
|
||||
msleep(10);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* disable interrupts
|
||||
*/
|
||||
writel(~(u32)0, base + OHCI_INTRDISABLE);
|
||||
writel(~(u32)0, base + OHCI_INTRSTATUS);
|
||||
|
||||
iounmap(base);
|
||||
}
|
||||
|
||||
static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
|
||||
{
|
||||
int wait_time, delta;
|
||||
void __iomem *base, *op_reg_base;
|
||||
u32 hcc_params, val, temp;
|
||||
u8 cap_length;
|
||||
|
||||
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
||||
pci_resource_len(pdev, 0));
|
||||
if (base == NULL) return;
|
||||
|
||||
cap_length = readb(base);
|
||||
op_reg_base = base + cap_length;
|
||||
hcc_params = readl(base + EHCI_HCC_PARAMS);
|
||||
hcc_params = (hcc_params >> 8) & 0xff;
|
||||
if (hcc_params) {
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
&val);
|
||||
if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
|
||||
/*
|
||||
* Ok, BIOS is in smm mode, try to hand off...
|
||||
*/
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
&temp);
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
temp | EHCI_USBLEGCTLSTS_SOOE);
|
||||
val |= EHCI_USBLEGSUP_OS;
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
val);
|
||||
|
||||
wait_time = 500;
|
||||
do {
|
||||
msleep(10);
|
||||
wait_time -= 10;
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
&val);
|
||||
} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
|
||||
if (!wait_time) {
|
||||
/*
|
||||
* well, possibly buggy BIOS...
|
||||
*/
|
||||
printk(KERN_WARNING "EHCI early BIOS handoff "
|
||||
"failed (BIOS bug ?)\n");
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
EHCI_USBLEGSUP_OS);
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
0);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* halt EHCI & disable its interrupts in any case
|
||||
*/
|
||||
val = readl(op_reg_base + EHCI_USBSTS);
|
||||
if ((val & EHCI_USBSTS_HALTED) == 0) {
|
||||
val = readl(op_reg_base + EHCI_USBCMD);
|
||||
val &= ~EHCI_USBCMD_RUN;
|
||||
writel(val, op_reg_base + EHCI_USBCMD);
|
||||
|
||||
wait_time = 2000;
|
||||
delta = 100;
|
||||
do {
|
||||
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
||||
udelay(delta);
|
||||
wait_time -= delta;
|
||||
val = readl(op_reg_base + EHCI_USBSTS);
|
||||
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
|
||||
break;
|
||||
}
|
||||
} while (wait_time > 0);
|
||||
}
|
||||
writel(0, op_reg_base + EHCI_USBINTR);
|
||||
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
||||
|
||||
iounmap(base);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
|
||||
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
|
||||
{
|
||||
if (!usb_early_handoff)
|
||||
return;
|
||||
|
||||
if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
|
||||
quirk_usb_handoff_uhci(pdev);
|
||||
} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
|
||||
quirk_usb_handoff_ohci(pdev);
|
||||
} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
|
||||
quirk_usb_disable_ehci(pdev);
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
|
||||
|
||||
/*
|
||||
* ... This is further complicated by the fact that some SiS96x south
|
||||
* bridges pretend to be 85C503/5513 instead. In that case see if we
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/
|
|||
|
||||
obj-$(CONFIG_USB_MON) += mon/
|
||||
|
||||
obj-$(CONFIG_PCI) += host/
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += host/
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += host/
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += host/
|
||||
|
|
|
|||
|
|
@ -1,8 +1,9 @@
|
|||
#
|
||||
# Makefile for USB Host Controller Driver
|
||||
# framework and drivers
|
||||
# Makefile for USB Host Controller Drivers
|
||||
#
|
||||
|
||||
obj-$(CONFIG_PCI) += pci-quirks.o
|
||||
|
||||
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
|
||||
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
|
||||
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,272 @@
|
|||
/*
|
||||
* This file contains code to reset and initialize USB host controllers.
|
||||
* Some of it includes work-arounds for PCI hardware and BIOS quirks.
|
||||
* It may need to run early during booting -- before USB would normally
|
||||
* initialize -- to ensure that Linux doesn't use any legacy modes.
|
||||
*
|
||||
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
|
||||
* (and others)
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/acpi.h>
|
||||
|
||||
|
||||
/*
|
||||
* PIIX3 USB: We have to disable USB interrupts that are
|
||||
* hardwired to PIRQD# and may be shared with an
|
||||
* external device.
|
||||
*
|
||||
* Legacy Support Register (LEGSUP):
|
||||
* bit13: USB PIRQ Enable (USBPIRQDEN),
|
||||
* bit4: Trap/SMI On IRQ Enable (USBSMIEN).
|
||||
*
|
||||
* We mask out all r/wc bits, too.
|
||||
*/
|
||||
static void __devinit quirk_piix3_usb(struct pci_dev *dev)
|
||||
{
|
||||
u16 legsup;
|
||||
|
||||
pci_read_config_word(dev, 0xc0, &legsup);
|
||||
legsup &= 0x50ef;
|
||||
pci_write_config_word(dev, 0xc0, legsup);
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
|
||||
|
||||
|
||||
/* FIXME these should be the guts of hcd->reset() methods; resolve all
|
||||
* the differences between this version and the HCD's version.
|
||||
*/
|
||||
|
||||
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
|
||||
#define UHCI_USBCMD 0 /* command register */
|
||||
#define UHCI_USBSTS 2 /* status register */
|
||||
#define UHCI_USBINTR 4 /* interrupt register */
|
||||
#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
|
||||
#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
|
||||
#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
|
||||
#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
|
||||
#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
|
||||
|
||||
#define OHCI_CONTROL 0x04
|
||||
#define OHCI_CMDSTATUS 0x08
|
||||
#define OHCI_INTRSTATUS 0x0c
|
||||
#define OHCI_INTRENABLE 0x10
|
||||
#define OHCI_INTRDISABLE 0x14
|
||||
#define OHCI_OCR (1 << 3) /* ownership change request */
|
||||
#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
|
||||
#define OHCI_INTR_OC (1 << 30) /* ownership change */
|
||||
|
||||
#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
|
||||
#define EHCI_USBCMD 0 /* command register */
|
||||
#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
|
||||
#define EHCI_USBSTS 4 /* status register */
|
||||
#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
|
||||
#define EHCI_USBINTR 8 /* interrupt register */
|
||||
#define EHCI_USBLEGSUP 0 /* legacy support register */
|
||||
#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
|
||||
#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
|
||||
#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
|
||||
#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
|
||||
|
||||
int usb_early_handoff __devinitdata = 0;
|
||||
static int __init usb_handoff_early(char *str)
|
||||
{
|
||||
usb_early_handoff = 1;
|
||||
return 0;
|
||||
}
|
||||
__setup("usb-handoff", usb_handoff_early);
|
||||
|
||||
static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
|
||||
{
|
||||
unsigned long base = 0;
|
||||
int wait_time, delta;
|
||||
u16 val, sts;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < PCI_ROM_RESOURCE; i++)
|
||||
if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
|
||||
base = pci_resource_start(pdev, i);
|
||||
break;
|
||||
}
|
||||
|
||||
if (!base)
|
||||
return;
|
||||
|
||||
/*
|
||||
* stop controller
|
||||
*/
|
||||
sts = inw(base + UHCI_USBSTS);
|
||||
val = inw(base + UHCI_USBCMD);
|
||||
val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
|
||||
outw(val, base + UHCI_USBCMD);
|
||||
|
||||
/*
|
||||
* wait while it stops if it was running
|
||||
*/
|
||||
if ((sts & UHCI_USBSTS_HALTED) == 0)
|
||||
{
|
||||
wait_time = 1000;
|
||||
delta = 100;
|
||||
|
||||
do {
|
||||
outw(0x1f, base + UHCI_USBSTS);
|
||||
udelay(delta);
|
||||
wait_time -= delta;
|
||||
val = inw(base + UHCI_USBSTS);
|
||||
if (val & UHCI_USBSTS_HALTED)
|
||||
break;
|
||||
} while (wait_time > 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* disable interrupts & legacy support
|
||||
*/
|
||||
outw(0, base + UHCI_USBINTR);
|
||||
outw(0x1f, base + UHCI_USBSTS);
|
||||
pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
|
||||
if (val & 0xbf)
|
||||
pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
|
||||
|
||||
}
|
||||
|
||||
static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
|
||||
{
|
||||
void __iomem *base;
|
||||
int wait_time;
|
||||
|
||||
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
||||
pci_resource_len(pdev, 0));
|
||||
if (base == NULL) return;
|
||||
|
||||
if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
|
||||
wait_time = 500; /* 0.5 seconds */
|
||||
writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
|
||||
writel(OHCI_OCR, base + OHCI_CMDSTATUS);
|
||||
while (wait_time > 0 &&
|
||||
readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
|
||||
wait_time -= 10;
|
||||
msleep(10);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* disable interrupts
|
||||
*/
|
||||
writel(~(u32)0, base + OHCI_INTRDISABLE);
|
||||
writel(~(u32)0, base + OHCI_INTRSTATUS);
|
||||
|
||||
iounmap(base);
|
||||
}
|
||||
|
||||
static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
|
||||
{
|
||||
int wait_time, delta;
|
||||
void __iomem *base, *op_reg_base;
|
||||
u32 hcc_params, val, temp;
|
||||
u8 cap_length;
|
||||
|
||||
base = ioremap_nocache(pci_resource_start(pdev, 0),
|
||||
pci_resource_len(pdev, 0));
|
||||
if (base == NULL) return;
|
||||
|
||||
cap_length = readb(base);
|
||||
op_reg_base = base + cap_length;
|
||||
hcc_params = readl(base + EHCI_HCC_PARAMS);
|
||||
hcc_params = (hcc_params >> 8) & 0xff;
|
||||
if (hcc_params) {
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
&val);
|
||||
if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
|
||||
/*
|
||||
* Ok, BIOS is in smm mode, try to hand off...
|
||||
*/
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
&temp);
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
temp | EHCI_USBLEGCTLSTS_SOOE);
|
||||
val |= EHCI_USBLEGSUP_OS;
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
val);
|
||||
|
||||
wait_time = 500;
|
||||
do {
|
||||
msleep(10);
|
||||
wait_time -= 10;
|
||||
pci_read_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
&val);
|
||||
} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
|
||||
if (!wait_time) {
|
||||
/*
|
||||
* well, possibly buggy BIOS...
|
||||
*/
|
||||
printk(KERN_WARNING "EHCI early BIOS handoff "
|
||||
"failed (BIOS bug ?)\n");
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGSUP,
|
||||
EHCI_USBLEGSUP_OS);
|
||||
pci_write_config_dword(pdev,
|
||||
hcc_params + EHCI_USBLEGCTLSTS,
|
||||
0);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* halt EHCI & disable its interrupts in any case
|
||||
*/
|
||||
val = readl(op_reg_base + EHCI_USBSTS);
|
||||
if ((val & EHCI_USBSTS_HALTED) == 0) {
|
||||
val = readl(op_reg_base + EHCI_USBCMD);
|
||||
val &= ~EHCI_USBCMD_RUN;
|
||||
writel(val, op_reg_base + EHCI_USBCMD);
|
||||
|
||||
wait_time = 2000;
|
||||
delta = 100;
|
||||
do {
|
||||
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
||||
udelay(delta);
|
||||
wait_time -= delta;
|
||||
val = readl(op_reg_base + EHCI_USBSTS);
|
||||
if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
|
||||
break;
|
||||
}
|
||||
} while (wait_time > 0);
|
||||
}
|
||||
writel(0, op_reg_base + EHCI_USBINTR);
|
||||
writel(0x3f, op_reg_base + EHCI_USBSTS);
|
||||
|
||||
iounmap(base);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
|
||||
|
||||
static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
|
||||
{
|
||||
if (!usb_early_handoff)
|
||||
return;
|
||||
|
||||
if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
|
||||
quirk_usb_handoff_uhci(pdev);
|
||||
} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
|
||||
quirk_usb_handoff_ohci(pdev);
|
||||
} else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
|
||||
quirk_usb_disable_ehci(pdev);
|
||||
}
|
||||
|
||||
return;
|
||||
}
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
|
||||
Загрузка…
Ссылка в новой задаче