cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem

tl;dr: Clean up an unnecessary export and enable cxl_test.

An RCD (Restricted CXL Device), in contrast to a typical CXL device in
a VH topology, obtains its component registers from the bottom half of
the associated CXL host bridge RCRB (Root Complex Register Block). In
turn this means that cxl_rcrb_to_component() needs to be called from
devm_cxl_add_endpoint().

Presently devm_cxl_add_endpoint() is part of the CXL core, but the only
user is the CXL mem module. Move it from cxl_core to cxl_mem to not only
get rid of an unnecessary export, but to also enable its call out to
cxl_rcrb_to_component(), in a subsequent patch, to be mocked by
cxl_test. Recall that cxl_test can only mock exported symbols, and since
cxl_rcrb_to_component() is itself inside the core, all callers must be
outside of cxl_core to allow cxl_test to mock it.

Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045072.1882361.13944923741276843683.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/cxl/core/core.h

@@ -58,14 +58,6 @@ extern struct rw_semaphore cxl_dpa_rwsem;
 
 bool is_switch_decoder(struct device *dev);
 struct cxl_switch_decoder *to_cxl_switch_decoder(struct device *dev);
-static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port,
-					 struct cxl_memdev *cxlmd)
-{
-	if (!port)
-		return NULL;
-
-	return xa_load(&port->endpoints, (unsigned long)&cxlmd->dev);
-}
 
 int cxl_memdev_init(void);
 void cxl_memdev_exit(void);

drivers/cxl/core/port.c

@@ -1212,45 +1212,6 @@ static void reap_dports(struct cxl_port *port)
 	}
 }
 
-int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
-			  struct cxl_dport *parent_dport)
-{
-	struct cxl_port *parent_port = parent_dport->port;
-	struct cxl_dev_state *cxlds = cxlmd->cxlds;
-	struct cxl_port *endpoint, *iter, *down;
-	int rc;
-
-	/*
-	 * Now that the path to the root is established record all the
-	 * intervening ports in the chain.
-	 */
-	for (iter = parent_port, down = NULL; !is_cxl_root(iter);
-	     down = iter, iter = to_cxl_port(iter->dev.parent)) {
-		struct cxl_ep *ep;
-
-		ep = cxl_ep_load(iter, cxlmd);
-		ep->next = down;
-	}
-
-	endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev,
-				     cxlds->component_reg_phys, parent_dport);
-	if (IS_ERR(endpoint))
-		return PTR_ERR(endpoint);
-
-	rc = cxl_endpoint_autoremove(cxlmd, endpoint);
-	if (rc)
-		return rc;
-
-	if (!endpoint->dev.driver) {
-		dev_err(&cxlmd->dev, "%s failed probe\n",
-			dev_name(&endpoint->dev));
-		return -ENXIO;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_NS_GPL(devm_cxl_add_endpoint, CXL);
-
 static void cxl_detach_ep(void *data)
 {
 	struct cxl_memdev *cxlmd = data;

drivers/cxl/cxl.h

@@ -560,8 +560,6 @@ struct pci_bus *cxl_port_to_pci_bus(struct cxl_port *port);
 struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport,
 				   resource_size_t component_reg_phys,
 				   struct cxl_dport *parent_dport);
-int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
-			  struct cxl_dport *parent_dport);
 struct cxl_port *find_cxl_root(struct device *dev);
 int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd);
 void cxl_bus_rescan(void);

drivers/cxl/cxlmem.h

@@ -80,6 +80,15 @@ static inline bool is_cxl_endpoint(struct cxl_port *port)
 
 struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds);
 
+static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port,
+					 struct cxl_memdev *cxlmd)
+{
+	if (!port)
+		return NULL;
+
+	return xa_load(&port->endpoints, (unsigned long)&cxlmd->dev);
+}
+
 /**
  * struct cxl_mbox_cmd - A command to be submitted to hardware.
  * @opcode: (input) The command set and command submitted to hardware.

drivers/cxl/mem.c

@@ -45,6 +45,44 @@ static int cxl_mem_dpa_show(struct seq_file *file, void *data)
 	return 0;
 }
 
+static int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd,
+				 struct cxl_dport *parent_dport)
+{
+	struct cxl_port *parent_port = parent_dport->port;
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	struct cxl_port *endpoint, *iter, *down;
+	int rc;
+
+	/*
+	 * Now that the path to the root is established record all the
+	 * intervening ports in the chain.
+	 */
+	for (iter = parent_port, down = NULL; !is_cxl_root(iter);
+	     down = iter, iter = to_cxl_port(iter->dev.parent)) {
+		struct cxl_ep *ep;
+
+		ep = cxl_ep_load(iter, cxlmd);
+		ep->next = down;
+	}
+
+	endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev,
+				     cxlds->component_reg_phys, parent_dport);
+	if (IS_ERR(endpoint))
+		return PTR_ERR(endpoint);
+
+	rc = cxl_endpoint_autoremove(cxlmd, endpoint);
+	if (rc)
+		return rc;
+
+	if (!endpoint->dev.driver) {
+		dev_err(&cxlmd->dev, "%s failed probe\n",
+			dev_name(&endpoint->dev));
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
 static int cxl_mem_probe(struct device *dev)
 {
 	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);