microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 

Pull libata updates from Tejun Heo:
 "libata saw quite a bit of activities in this cycle:

   - SMR drive support still being worked on

   - bug fixes and improvements to misc SCSI command emulation

   - some low level driver updates"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
  libata-scsi: better style in ata_msense_*()
  AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
  ata: sata_dwc_460ex: remove redundant dev_err call
  ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
  libata: remove ATA_PROT_FLAG_DATA
  libata: remove ata_is_nodata
  ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
  libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
  libata-scsi: Fix ZBC management out command translation
  libata-scsi: Fix translation of REPORT ZONES command
  ata: Handle ATA NCQ NO-DATA commands correctly
  libata-eh: decode all taskfile protocols
  ata: fixup ATA_PROT_NODATA
  libsas: use ata_is_ncq() and ata_has_dma() accessors
  libata: use ata_is_ncq() accessors
  libata: return boolean values from ata_is_*
  libata-scsi: avoid repeated calculation of number of TRIM ranges
  libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
  libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
  libata-scsi: fix D_SENSE bit relection in control mode page
  ...
This commit is contained in:
Linus Torvalds 2016-07-26 14:39:40 -07:00
Родитель b55b048718 737bee9308
Коммит 75a442efb1
24 изменённых файлов: 314 добавлений и 153 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

9
Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt → Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
Просмотреть файл

@ -1,13 +1,14 @@
* Broadcom SATA3 AHCI Controller for STB
* Broadcom SATA3 AHCI Controller
SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : should be one or more of
"brcm,bcm7425-ahci"
"brcm,bcm7445-ahci"
"brcm,sata3-ahci"
"brcm,bcm7425-ahci"
"brcm,bcm7445-ahci"
"brcm,bcm-nsp-ahci"
"brcm,sata3-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
- interrupts : interrupt mapping for SATA IRQ

4
Documentation/devicetree/bindings/phy/brcm-sata-phy.txt
Просмотреть файл

@ -5,6 +5,7 @@ Required properties:
"brcm,bcm7425-sata-phy"
"brcm,bcm7445-sata-phy"
"brcm,iproc-ns2-sata-phy"
"brcm,iproc-nsp-sata-phy"
"brcm,phy-sata3"
- address-cells: should be 1
- size-cells: should be 0
@ -22,7 +23,8 @@ Sub-nodes required properties:
Sub-nodes optional properties:
- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
This property is not applicable for "brcm,iproc-ns2-sata-phy".
This property is not applicable for "brcm,iproc-ns2-sata-phy" and
"brcm,iproc-nsp-sata-phy".
Example:
sata-phy@f0458100 {

1
MAINTAINERS
Просмотреть файл

@ -6768,6 +6768,7 @@ S: Maintained
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
F: Documentation/devicetree/bindings/ata/
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <vireshk@kernel.org>

42
arch/arm/boot/dts/bcm-nsp.dtsi
Просмотреть файл

@ -271,6 +271,48 @@
<0x30028 0x04>,
<0x3f408 0x04>;
};
sata_phy: sata_phy@40100 {
compatible = "brcm,iproc-nsp-sata-phy";
reg = <0x40100 0x340>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
sata_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
status = "disabled";
};
sata_phy1: sata-phy@1 {
reg = <1>;
#phy-cells = <0>;
status = "disabled";
};
};
sata: ahci@41000 {
compatible = "brcm,bcm-nsp-ahci";
reg-names = "ahci", "top-ctrl";
reg = <0x41000 0x1000>, <0x40020 0x1c>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0: sata-port@0 {
reg = <0>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
};
sata1: sata-port@1 {
reg = <1>;
phys = <&sata_phy1>;
phy-names = "sata-phy";
};
};
};
pcie0: pcie@18012000 {

12
arch/arm/boot/dts/bcm958625k.dts
Просмотреть файл

@ -68,6 +68,18 @@
status = "okay";
};
&sata_phy0 {
status = "okay";
};
&sata_phy1 {
status = "okay";
};
&sata {
status = "okay";
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";

8
drivers/ata/Kconfig
Просмотреть файл

@ -98,12 +98,12 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
config AHCI_BRCMSTB
tristate "Broadcom STB AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC
config AHCI_BRCM
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
help
This option enables support for the AHCI SATA3 controller found on
STB SoC's.
Broadcom SoC's.
If unsure, say N.

2
drivers/ata/Makefile
Просмотреть файл

@ -11,7 +11,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o

2
drivers/ata/ahci.c
Просмотреть файл

@ -580,7 +580,7 @@ static struct pci_driver ahci_pci_driver = {
},
};
#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
#if IS_ENABLED(CONFIG_PATA_MARVELL)
static int marvell_enable;
#else
static int marvell_enable = 1;

46
drivers/ata/ahci_brcmstb.c → drivers/ata/ahci_brcm.c
Просмотреть файл

@ -71,6 +71,12 @@
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
enum brcm_ahci_version {
BRCM_SATA_BCM7425 = 1,
BRCM_SATA_BCM7445,
BRCM_SATA_NSP,
};
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
@ -81,6 +87,7 @@ struct brcm_ahci_priv {
void __iomem *top_ctrl;
u32 port_mask;
u32 quirks;
enum brcm_ahci_version version;
};
static const struct ata_port_info ahci_brcm_port_info = {
@ -247,9 +254,19 @@ static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
/* Configure endianness */
brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
if (priv->version == BRCM_SATA_NSP) {
u32 data = brcm_sata_readreg(ctrl);
data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
(0x03 << DMADESC_ENDIAN_SHIFT));
data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
(0x02 << DMADESC_ENDIAN_SHIFT);
brcm_sata_writereg(data, ctrl);
} else
brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
}
#ifdef CONFIG_PM_SLEEP
@ -282,8 +299,17 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static int brcm_ahci_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
@ -293,6 +319,12 @@ static int brcm_ahci_probe(struct platform_device *pdev)
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
if (!of_id)
return -ENODEV;
priv->version = (enum brcm_ahci_version)of_id->data;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
@ -300,7 +332,8 @@ static int brcm_ahci_probe(struct platform_device *pdev)
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
if (of_device_is_compatible(dev->of_node, "brcm,bcm7425-ahci")) {
if ((priv->version == BRCM_SATA_BCM7425) ||
(priv->version == BRCM_SATA_NSP)) {
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
}
@ -354,13 +387,6 @@ static int brcm_ahci_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7425-ahci"},
{.compatible = "brcm,bcm7445-ahci"},
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
static struct platform_driver brcm_ahci_driver = {

10
drivers/ata/libahci.c
Просмотреть файл

@ -1975,7 +1975,7 @@ unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
*/
pp->active_link = qc->dev->link;
if (qc->tf.protocol == ATA_PROT_NCQ)
if (ata_is_ncq(qc->tf.protocol))
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
@ -2392,12 +2392,20 @@ static int ahci_port_start(struct ata_port *ap)
static void ahci_port_stop(struct ata_port *ap)
{
const char *emsg = NULL;
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *host_mmio = hpriv->mmio;
int rc;
/* de-initialize port */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
ata_port_warn(ap, "%s (%d)\n", emsg, rc);
/*
* Clear GHC.IS to prevent stuck INTx after disabling MSI and
* re-enabling INTx.
*/
writel(1 << ap->port_no, host_mmio + HOST_IRQ_STAT);
}
void ahci_print_info(struct ata_host *host, const char *scc_s)

14
drivers/ata/libata-core.c
Просмотреть файл

@ -1238,7 +1238,7 @@ static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
} else
tf.command = ATA_CMD_READ_NATIVE_MAX;
tf.protocol |= ATA_PROT_NODATA;
tf.protocol = ATA_PROT_NODATA;
tf.device |= ATA_LBA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
@ -1297,7 +1297,7 @@ static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
tf.device |= (new_sectors >> 24) & 0xf;
}
tf.protocol |= ATA_PROT_NODATA;
tf.protocol = ATA_PROT_NODATA;
tf.device |= ATA_LBA;
tf.lbal = (new_sectors >> 0) & 0xff;
@ -4848,7 +4848,7 @@ int ata_std_qc_defer(struct ata_queued_cmd *qc)
{
struct ata_link *link = qc->dev->link;
if (qc->tf.protocol == ATA_PROT_NCQ) {
if (ata_is_ncq(qc->tf.protocol)) {
if (!ata_tag_valid(link->active_tag))
return 0;
} else {
@ -5013,7 +5013,7 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
ata_sg_clean(qc);
/* command should be marked inactive atomically with qc completion */
if (qc->tf.protocol == ATA_PROT_NCQ) {
if (ata_is_ncq(qc->tf.protocol)) {
link->sactive &= ~(1 << qc->tag);
if (!link->sactive)
ap->nr_active_links--;
@ -5050,7 +5050,7 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc)
{
struct ata_device *dev = qc->dev;
if (ata_is_nodata(qc->tf.protocol))
if (!ata_is_data(qc->tf.protocol))
return;
if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
@ -5133,7 +5133,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
switch (qc->tf.command) {
case ATA_CMD_SET_FEATURES:
if (qc->tf.feature != SETFEATURES_WC_ON &&
qc->tf.feature != SETFEATURES_WC_OFF)
qc->tf.feature != SETFEATURES_WC_OFF &&
qc->tf.feature != SETFEATURES_RA_ON &&
qc->tf.feature != SETFEATURES_RA_OFF)
break;
/* fall through */
case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */

8
drivers/ata/libata-eh.c
Просмотреть файл

@ -2607,9 +2607,13 @@ static void ata_eh_link_report(struct ata_link *link)
[DMA_FROM_DEVICE] = "in",
};
static const char *prot_str[] = {
[ATA_PROT_UNKNOWN] = "unknown",
[ATA_PROT_NODATA] = "nodata",
[ATA_PROT_PIO] = "pio",
[ATA_PROT_DMA] = "dma",
[ATA_PROT_NCQ] = "ncq",
[ATA_PROT_NCQ] = "ncq dma",
[ATA_PROT_NCQ_NODATA] = "ncq nodata",
[ATAPI_PROT_NODATA] = "nodata",
[ATAPI_PROT_PIO] = "pio",
[ATAPI_PROT_DMA] = "dma",
};
@ -3177,7 +3181,7 @@ static void ata_eh_park_issue_cmd(struct ata_device *dev, int park)
}
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
tf.protocol |= ATA_PROT_NODATA;
tf.protocol = ATA_PROT_NODATA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
if (park && (err_mask || tf.lbal != 0xc4)) {
ata_dev_err(dev, "head unload failed!\n");

82
drivers/ata/libata-scsi.c
Просмотреть файл

@ -304,7 +304,7 @@ static void ata_scsi_set_invalid_field(struct ata_device *dev,
struct scsi_cmnd *cmd, u16 field, u8 bit)
{
ata_scsi_set_sense(dev, cmd, ILLEGAL_REQUEST, 0x24, 0x0);
/* "Invalid field in cbd" */
/* "Invalid field in CDB" */
scsi_set_sense_field_pointer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
field, bit, 1);
}
@ -2075,8 +2075,8 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
0x03,
0x20, /* SBC-2 (no version claimed) */
0x02,
0x60 /* SPC-3 (no version claimed) */
0x03,
0x00 /* SPC-3 (no version claimed) */
};
const u8 versions_zbc[] = {
0x00,
@ -2097,7 +2097,10 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
0,
0x5, /* claim SPC-3 version compatibility */
2,
95 - 4
95 - 4,
0,
0,
2
};
VPRINTK("ENTER\n");
@ -2109,8 +2112,10 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf)
(args->dev->link->ap->pflags & ATA_PFLAG_EXTERNAL))
hdr[1] |= (1 << 7);
if (args->dev->class == ATA_DEV_ZAC)
if (args->dev->class == ATA_DEV_ZAC) {
hdr[0] = TYPE_ZBC;
hdr[2] = 0x7; /* claim SPC-5 version compatibility */
}
memcpy(rbuf, hdr, sizeof(hdr));
memcpy(&rbuf[8], "ATA ", 8);
@ -2314,7 +2319,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
* with the unmap bit set.
*/
if (ata_id_has_trim(args->id)) {
put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
put_unaligned_be64(65535 * ATA_MAX_TRIM_RNUM, &rbuf[36]);
put_unaligned_be32(1, &rbuf[28]);
}
@ -2424,15 +2429,17 @@ static void modecpy(u8 *dest, const u8 *src, int n, bool changeable)
static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
{
modecpy(buf, def_cache_mpage, sizeof(def_cache_mpage), changeable);
if (changeable || ata_id_wcache_enabled(id))
buf[2] |= (1 << 2); /* write cache enable */
if (!changeable && !ata_id_rahead_enabled(id))
buf[12] |= (1 << 5); /* disable read ahead */
if (changeable) {
buf[2] |= (1 << 2); /* ata_mselect_caching() */
} else {
buf[2] |= (ata_id_wcache_enabled(id) << 2); /* write cache enable */
buf[12] |= (!ata_id_rahead_enabled(id) << 5); /* disable read ahead */
}
return sizeof(def_cache_mpage);
}
/**
* ata_msense_ctl_mode - Simulate MODE SENSE control mode page
* ata_msense_control - Simulate MODE SENSE control mode page
* @dev: ATA device of interest
* @buf: output buffer
* @changeable: whether changeable parameters are requested
@ -2442,12 +2449,17 @@ static unsigned int ata_msense_caching(u16 *id, u8 *buf, bool changeable)
* LOCKING:
* None.
*/
static unsigned int ata_msense_ctl_mode(struct ata_device *dev, u8 *buf,
static unsigned int ata_msense_control(struct ata_device *dev, u8 *buf,
bool changeable)
{
modecpy(buf, def_control_mpage, sizeof(def_control_mpage), changeable);
if (changeable && (dev->flags & ATA_DFLAG_D_SENSE))
buf[2] |= (1 << 2); /* Descriptor sense requested */
if (changeable) {
buf[2] |= (1 << 2); /* ata_mselect_control() */
} else {
bool d_sense = (dev->flags & ATA_DFLAG_D_SENSE);
buf[2] |= (d_sense << 2); /* descriptor format sense data */
}
return sizeof(def_control_mpage);
}
@ -2566,13 +2578,13 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf)
break;
case CONTROL_MPAGE:
p += ata_msense_ctl_mode(args->dev, p, page_control == 1);
p += ata_msense_control(args->dev, p, page_control == 1);
break;
case ALL_MPAGES:
p += ata_msense_rw_recovery(p, page_control == 1);
p += ata_msense_caching(args->id, p, page_control == 1);
p += ata_msense_ctl_mode(args->dev, p, page_control == 1);
p += ata_msense_control(args->dev, p, page_control == 1);
break;
default: /* invalid page code */
@ -3077,6 +3089,9 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
goto invalid_fld;
}
if (ata_is_ncq(tf->protocol) && (cdb[2] & 0x3) == 0)
tf->protocol = ATA_PROT_NCQ_NODATA;
/* enable LBA */
tf->flags |= ATA_TFLAG_LBA;
@ -3125,8 +3140,8 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
tf->command = cdb[9];
}
/* For NCQ commands with FPDMA protocol, copy the tag value */
if (tf->protocol == ATA_PROT_NCQ)
/* For NCQ commands copy the tag value */
if (ata_is_ncq(tf->protocol))
tf->nsect = qc->tag << 3;
/* enforce correct master/slave bit */
@ -3305,7 +3320,13 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
goto invalid_param_len;
buf = page_address(sg_page(scsi_sglist(scmd)));
size = ata_set_lba_range_entries(buf, 512, block, n_block);
if (n_block <= 65535 * ATA_MAX_TRIM_RNUM) {
size = ata_set_lba_range_entries(buf, ATA_MAX_TRIM_RNUM, block, n_block);
} else {
fp = 2;
goto invalid_fld;
}
if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
/* Newer devices support queued TRIM commands */
@ -3454,7 +3475,7 @@ static unsigned int ata_scsi_zbc_in_xlat(struct ata_queued_cmd *qc)
goto invalid_param_len;
}
sect = n_block / 512;
options = cdb[14];
options = cdb[14] & 0xbf;
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_in_supported(qc->dev)) {
@ -3464,7 +3485,7 @@ static unsigned int ata_scsi_zbc_in_xlat(struct ata_queued_cmd *qc)
tf->nsect = qc->tag << 3;
tf->feature = sect & 0xff;
tf->hob_feature = (sect >> 8) & 0xff;
tf->auxiliary = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
tf->auxiliary = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES | (options << 8);
} else {
tf->command = ATA_CMD_ZAC_MGMT_IN;
tf->feature = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
@ -3506,7 +3527,7 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc)
struct scsi_cmnd *scmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
const u8 *cdb = scmd->cmnd;
u8 reset_all, sa;
u8 all, sa;
u64 block;
u32 n_block;
u16 fp = (u16)-1;
@ -3533,20 +3554,20 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc)
if (block > dev->n_sectors)
goto out_of_range;
reset_all = cdb[14] & 0x1;
all = cdb[14] & 0x1;
if (ata_ncq_enabled(qc->dev) &&
ata_fpdma_zac_mgmt_out_supported(qc->dev)) {
tf->protocol = ATA_PROT_NCQ;
tf->protocol = ATA_PROT_NCQ_NODATA;
tf->command = ATA_CMD_NCQ_NON_DATA;
tf->hob_nsect = ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT;
tf->feature = ATA_SUBCMD_NCQ_NON_DATA_ZAC_MGMT_OUT;
tf->nsect = qc->tag << 3;
tf->auxiliary = sa | (reset_all & 0x1) << 8;
tf->auxiliary = sa | ((u16)all << 8);
} else {
tf->protocol = ATA_PROT_NODATA;
tf->command = ATA_CMD_ZAC_MGMT_OUT;
tf->feature = sa;
tf->hob_feature = reset_all & 0x1;
tf->hob_feature = all;
}
tf->lbah = (block >> 16) & 0xff;
tf->lbam = (block >> 8) & 0xff;
@ -3667,7 +3688,7 @@ static int ata_mselect_control(struct ata_queued_cmd *qc,
/*
* Check that read-only bits are not modified.
*/
ata_msense_ctl_mode(dev, mpage, false);
ata_msense_control(dev, mpage, false);
for (i = 0; i < CONTROL_MPAGE_LEN - 2; i++) {
if (i == 0)
continue;
@ -4039,11 +4060,6 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
args.done = cmd->scsi_done;
switch(scsicmd[0]) {
/* TODO: worth improving? */
case FORMAT_UNIT:
ata_scsi_invalid_field(dev, cmd, 0);
break;
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
ata_scsi_invalid_field(dev, cmd, 1);

9
drivers/ata/libata-transport.c
Просмотреть файл

@ -495,12 +495,13 @@ struct ata_show_ering_arg {
static int ata_show_ering(struct ata_ering_entry *ent, void *void_arg)
{
struct ata_show_ering_arg* arg = void_arg;
struct timespec time;
u64 seconds;
u32 rem;
jiffies_to_timespec(ent->timestamp,&time);
seconds = div_u64_rem(ent->timestamp, HZ, &rem);
arg->written += sprintf(arg->buf + arg->written,
"[%5lu.%06lu]",
time.tv_sec, time.tv_nsec);
"[%5llu.%09lu]", seconds,
rem * NSEC_PER_SEC / HZ);
arg->written += get_ata_err_names(ent->err_mask,
arg->buf + arg->written);
return 0;

2
drivers/ata/pata_arasan_cf.c
Просмотреть файл

@ -565,7 +565,7 @@ chan_request_fail:
qc->ap->hsm_task_state = HSM_ST_ERR;
cf_ctrl_reset(acdev);
spin_unlock_irqrestore(qc->ap->lock, flags);
spin_unlock_irqrestore(&acdev->host->lock, flags);
sff_intr:
dma_complete(acdev);
}

4
drivers/ata/pata_atiixp.c
Просмотреть файл

@ -183,8 +183,8 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* We must now look at the PIO mode situation. We may need to
* adjust the PIO mode to keep the timings acceptable
*/
if (adev->dma_mode >= XFER_MW_DMA_2)
wanted_pio = 4;
if (adev->dma_mode >= XFER_MW_DMA_2)
wanted_pio = 4;
else if (adev->dma_mode == XFER_MW_DMA_1)
wanted_pio = 3;
else if (adev->dma_mode == XFER_MW_DMA_0)

2
drivers/ata/pata_hpt366.c
Просмотреть файл

@ -368,7 +368,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* PCI clocking determines the ATA timing values to use */
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch ((reg1 & 0x700) >> 8) {
switch ((reg1 & 0xf00) >> 8) {
case 9:
hpriv = &hpt366_40;
break;

2
drivers/ata/pata_marvell.c
Просмотреть файл

@ -146,7 +146,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
#if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE)
#if IS_ENABLED(CONFIG_SATA_AHCI)
if (!marvell_pata_active(pdev)) {
printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
return -ENODEV;

14
drivers/ata/sata_dwc_460ex.c
Просмотреть файл

@ -259,11 +259,8 @@ static int sata_dwc_dma_init_old(struct platform_device *pdev,
/* Get physical SATA DMA register base address */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hsdev->dma->regs)) {
dev_err(&pdev->dev,
"ioremap failed for AHBDMA register address\n");
if (IS_ERR(hsdev->dma->regs))
return PTR_ERR(hsdev->dma->regs);
}
/* Initialize AHB DMAC */
return dw_dma_probe(hsdev->dma);
@ -281,7 +278,7 @@ static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
static const char *get_prot_descript(u8 protocol)
{
switch ((enum ata_tf_protocols)protocol) {
switch (protocol) {
case ATA_PROT_NODATA:
return "ATA no data";
case ATA_PROT_PIO:
@ -290,6 +287,8 @@ static const char *get_prot_descript(u8 protocol)
return "ATA DMA";
case ATA_PROT_NCQ:
return "ATA NCQ";
case ATA_PROT_NCQ_NODATA:
return "ATA NCQ no data";
case ATAPI_PROT_NODATA:
return "ATAPI no data";
case ATAPI_PROT_PIO:
@ -1225,11 +1224,8 @@ static int sata_dwc_probe(struct platform_device *ofdev)
/* Ioremap SATA registers */
res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&ofdev->dev, res);
if (IS_ERR(base)) {
dev_err(&ofdev->dev,
"ioremap failed for SATA register address\n");
if (IS_ERR(base))
return PTR_ERR(base);
}
dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
/* Synopsys DWC SATA specific Registers */

81
drivers/phy/phy-brcm-sata.c
Просмотреть файл

@ -45,6 +45,7 @@ enum brcm_sata_phy_version {
BRCM_SATA_PHY_STB_28NM,
BRCM_SATA_PHY_STB_40NM,
BRCM_SATA_PHY_IPROC_NS2,
BRCM_SATA_PHY_IPROC_NSP,
};
struct brcm_sata_port {
@ -73,6 +74,13 @@ enum sata_phy_regs {
PLL_REG_BANK_0 = 0x050,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
PLLCONTROL_0_FREQ_DET_RESTART = BIT(13),
PLLCONTROL_0_FREQ_MONITOR = BIT(12),
PLLCONTROL_0_SEQ_START = BIT(15),
PLL_CAP_CONTROL = 0x85,
PLL_ACTRL2 = 0x8b,
PLL_ACTRL2_SELDIV_MASK = 0x1f,
PLL_ACTRL2_SELDIV_SHIFT = 9,
PLL1_REG_BANK = 0x060,
PLL1_ACTRL2 = 0x82,
@ -80,6 +88,7 @@ enum sata_phy_regs {
PLL1_ACTRL4 = 0x84,
OOB_REG_BANK = 0x150,
OOB1_REG_BANK = 0x160,
OOB_CTRL1 = 0x80,
OOB_CTRL1_BURST_MAX_MASK = 0xf,
OOB_CTRL1_BURST_MAX_SHIFT = 12,
@ -271,6 +280,73 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
return 0;
}
static int brcm_nsp_sata_init(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
struct device *dev = port->phy_priv->dev;
void __iomem *base = priv->phy_base;
unsigned int oob_bank;
unsigned int val, try;
/* Configure OOB control */
if (port->portnum == 0)
oob_bank = OOB_REG_BANK;
else if (port->portnum == 1)
oob_bank = OOB1_REG_BANK;
else
return -EINVAL;
val = 0x0;
val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT);
val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val);
val = 0x0;
val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2,
~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
0x0c << PLL_ACTRL2_SELDIV_SHIFT);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL,
0xff0, 0x4f0);
val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR;
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
val = PLLCONTROL_0_SEQ_START;
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, 0);
mdelay(10);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
/* Wait for pll_seq_done bit */
try = 50;
while (try--) {
val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
msleep(20);
}
if (!try) {
/* PLL did not lock; give up */
dev_err(dev, "port%d PLL did not lock\n", port->portnum);
return -ETIMEDOUT;
}
dev_dbg(dev, "port%d initialized\n", port->portnum);
return 0;
}
static int brcm_sata_phy_init(struct phy *phy)
{
int rc;
@ -284,6 +360,9 @@ static int brcm_sata_phy_init(struct phy *phy)
case BRCM_SATA_PHY_IPROC_NS2:
rc = brcm_ns2_sata_init(port);
break;
case BRCM_SATA_PHY_IPROC_NSP:
rc = brcm_nsp_sata_init(port);
break;
default:
rc = -ENODEV;
};
@ -303,6 +382,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = {
.data = (void *)BRCM_SATA_PHY_STB_40NM },
{ .compatible = "brcm,iproc-ns2-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
{ .compatible = "brcm,iproc-nsp-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_NSP },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);

11
drivers/scsi/libsas/sas_ata.c
Просмотреть файл

@ -233,15 +233,8 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
task->task_state_flags = SAS_TASK_STATE_PENDING;
qc->lldd_task = task;
switch (qc->tf.protocol) {
case ATA_PROT_NCQ:
task->ata_task.use_ncq = 1;
/* fall through */
case ATAPI_PROT_DMA:
case ATA_PROT_DMA:
task->ata_task.dma_xfer = 1;
break;
}
task->ata_task.use_ncq = ata_is_ncq(qc->tf.protocol);
task->ata_task.dma_xfer = ata_is_dma(qc->tf.protocol);
if (qc->scsicmd)
ASSIGN_SAS_TASK(qc->scsicmd, task);

41
include/linux/ata.h
Просмотреть файл

@ -46,8 +46,9 @@ enum {
ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_1024 = 1024,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
ATA_MAX_SECTORS_LBA48 = 65535,/* avoid count to be 0000h */
ATA_MAX_SECTORS_TAPE = 65535,
ATA_MAX_TRIM_RNUM = 64, /* 512-byte payload / (6-byte LBA + 2-byte range per entry) */
ATA_ID_WORDS = 256,
ATA_ID_CONFIG = 0,
@ -409,6 +410,9 @@ enum {
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
SETFEATURES_RA_ON = 0xaa, /* Enable read look-ahead */
SETFEATURES_RA_OFF = 0x55, /* Disable read look-ahead */
/* Enable/Disable Automatic Acoustic Management */
SETFEATURES_AAM_ON = 0x42,
SETFEATURES_AAM_OFF = 0xC2,
@ -519,16 +523,23 @@ enum {
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
};
enum ata_tf_protocols {
/* ATA taskfile protocols */
ATA_PROT_UNKNOWN, /* unknown/invalid */
ATA_PROT_NODATA, /* no data */
ATA_PROT_PIO, /* PIO data xfer */
ATA_PROT_DMA, /* DMA */
ATA_PROT_NCQ, /* NCQ */
ATAPI_PROT_NODATA, /* packet command, no data */
ATAPI_PROT_PIO, /* packet command, PIO data xfer*/
ATAPI_PROT_DMA, /* packet command with special DMA sauce */
enum ata_prot_flags {
/* protocol flags */
ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
/* taskfile protocols */
ATA_PROT_UNKNOWN = (u8)-1,
ATA_PROT_NODATA = 0,
ATA_PROT_PIO = ATA_PROT_FLAG_PIO,
ATA_PROT_DMA = ATA_PROT_FLAG_DMA,
ATA_PROT_NCQ_NODATA = ATA_PROT_FLAG_NCQ,
ATA_PROT_NCQ = ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ,
ATAPI_PROT_NODATA = ATA_PROT_FLAG_ATAPI,
ATAPI_PROT_PIO = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO,
ATAPI_PROT_DMA = ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA,
};
enum ata_ioctls {
@ -1066,12 +1077,12 @@ static inline void ata_id_to_hd_driveid(u16 *id)
* TO NV CACHE PINNED SET.
*/
static inline unsigned ata_set_lba_range_entries(void *_buffer,
unsigned buf_size, u64 sector, unsigned long count)
unsigned num, u64 sector, unsigned long count)
{
__le64 *buffer = _buffer;
unsigned i = 0, used_bytes;
while (i < buf_size / 8 ) { /* 6-byte LBA + 2-byte range per entry */
while (i < num) {
u64 entry = sector |
((u64)(count > 0xffff ? 0xffff : count) << 48);
buffer[i++] = __cpu_to_le64(entry);
@ -1095,13 +1106,13 @@ static inline bool ata_ok(u8 status)
static inline bool lba_28_ok(u64 block, u32 n_block)
{
/* check the ending block number: must be LESS THAN 0x0fffffff */
return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256);
return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= ATA_MAX_SECTORS);
}
static inline bool lba_48_ok(u64 block, u32 n_block)
{
/* check the ending block number */
return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= ATA_MAX_SECTORS_LBA48);
}
#define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)

60
include/linux/libata.h
Просмотреть файл

@ -146,13 +146,6 @@ enum {
ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
/* protocol flags */
ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
/* struct ata_device stuff */
ATA_DFLAG_LBA = (1 << 0), /* device supports LBA */
ATA_DFLAG_LBA48 = (1 << 1), /* device supports LBA48 */
@ -1039,58 +1032,29 @@ extern const unsigned long sata_deb_timing_long[];
extern struct ata_port_operations ata_dummy_port_ops;
extern const struct ata_port_info ata_dummy_port_info;
/*
* protocol tests
*/
static inline unsigned int ata_prot_flags(u8 prot)
static inline bool ata_is_atapi(u8 prot)
{
switch (prot) {
case ATA_PROT_NODATA:
return 0;
case ATA_PROT_PIO:
return ATA_PROT_FLAG_PIO;
case ATA_PROT_DMA:
return ATA_PROT_FLAG_DMA;
case ATA_PROT_NCQ:
return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
case ATAPI_PROT_NODATA:
return ATA_PROT_FLAG_ATAPI;
case ATAPI_PROT_PIO:
return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
case ATAPI_PROT_DMA:
return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
}
return 0;
return prot & ATA_PROT_FLAG_ATAPI;
}
static inline int ata_is_atapi(u8 prot)
static inline bool ata_is_pio(u8 prot)
{
return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
return prot & ATA_PROT_FLAG_PIO;
}
static inline int ata_is_nodata(u8 prot)
static inline bool ata_is_dma(u8 prot)
{
return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
return prot & ATA_PROT_FLAG_DMA;
}
static inline int ata_is_pio(u8 prot)
static inline bool ata_is_ncq(u8 prot)
{
return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
return prot & ATA_PROT_FLAG_NCQ;
}
static inline int ata_is_dma(u8 prot)
static inline bool ata_is_data(u8 prot)
{
return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
}
static inline int ata_is_ncq(u8 prot)
{
return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
}
static inline int ata_is_data(u8 prot)
{
return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
return prot & (ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA);
}
static inline int is_multi_taskfile(struct ata_taskfile *tf)
@ -1407,7 +1371,7 @@ static inline bool sata_pmp_attached(struct ata_port *ap)
return ap->nr_pmp_links != 0;
}
static inline int ata_is_host_link(const struct ata_link *link)
static inline bool ata_is_host_link(const struct ata_link *link)
{
return link == &link->ap->link || link == link->ap->slave_link;
}
@ -1422,7 +1386,7 @@ static inline bool sata_pmp_attached(struct ata_port *ap)
return false;
}
static inline int ata_is_host_link(const struct ata_link *link)
static inline bool ata_is_host_link(const struct ata_link *link)
{
return 1;
}

1
include/trace/events/libata.h
Просмотреть файл

@ -126,6 +126,7 @@
ata_protocol_name(ATA_PROT_PIO), \
ata_protocol_name(ATA_PROT_DMA), \
ata_protocol_name(ATA_PROT_NCQ), \
ata_protocol_name(ATA_PROT_NCQ_NODATA), \
ata_protocol_name(ATAPI_PROT_NODATA), \
ata_protocol_name(ATAPI_PROT_PIO), \
ata_protocol_name(ATAPI_PROT_DMA))