microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

[ALSA] ASoC pxa2xx AC97 support 

This patch adds pxa2xx AC97 ASoC audio support. It's based on
sound/arm/pxa-ac97 by Nicolas Pitre with the following differences.
 o Modified driver structure to use ASoC core PCM callbacks.
 o Removed AC97 configuration function (all handled in ASoC core)
 o Added and exported ASoC DAI configuration table.
 o Added DMA support for AUX DAC and Mic ADC
 o Separated out AC97 reset into cold and warm reset functions.
From: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
This commit is contained in:
Liam Girdwood 2006-10-12 14:29:03 +02:00 коммит произвёл Jaroslav Kysela
Родитель 3e7cc3d3d1
Коммит 75b4102766
1 изменённых файлов: 437 добавлений и 0 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

437
sound/soc/pxa/pxa2xx-ac97.c Normal file
Просмотреть файл

@ -0,0 +1,437 @@
/*
* linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
*
* Author: Nicolas Pitre
* Created: Dec 02, 2004
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <asm/irq.h>
#include <linux/mutex.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include "pxa2xx-pcm.h"
static DEFINE_MUTEX(car_mutex);
static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
static volatile long gsr_bits;
#define AC97_DIR \
(SND_SOC_DAIDIR_PLAYBACK | SND_SOC_DAIDIR_CAPTURE)
#define AC97_RATES \
(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
/* may need to expand this */
static struct snd_soc_dai_mode pxa2xx_ac97_modes[] = {
{
.pcmfmt = SNDRV_PCM_FMTBIT_S16_LE,
.pcmrate = AC97_RATES,
.pcmdir = AC97_DIR,
},
};
/*
* Beware PXA27x bugs:
*
* o Slot 12 read from modem space will hang controller.
* o CDONE, SDONE interrupt fails after any slot 12 IO.
*
* We therefore have an hybrid approach for waiting on SDONE (interrupt or
* 1 jiffy timeout if interrupt never comes).
*/
static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
{
unsigned short val = -1;
volatile u32 *reg_addr;
mutex_lock(&car_mutex);
/* set up primary or secondary codec/modem space */
#ifdef CONFIG_PXA27x
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#else
if (reg == AC97_GPIO_STATUS)
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
else
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#endif
reg_addr += (reg >> 1);
#ifndef CONFIG_PXA27x
if (reg == AC97_GPIO_STATUS) {
/* read from controller cache */
val = *reg_addr;
goto out;
}
#endif
/* start read access across the ac97 link */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
val = *reg_addr;
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
if (!((GSR | gsr_bits) & GSR_SDONE)) {
printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
__FUNCTION__, reg, GSR | gsr_bits);
val = -1;
goto out;
}
/* valid data now */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
val = *reg_addr;
/* but we've just started another cycle... */
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
out: mutex_unlock(&car_mutex);
return val;
}
static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
unsigned short val)
{
volatile u32 *reg_addr;
mutex_lock(&car_mutex);
/* set up primary or secondary codec/modem space */
#ifdef CONFIG_PXA27x
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#else
if (reg == AC97_GPIO_STATUS)
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
else
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#endif
reg_addr += (reg >> 1);
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
*reg_addr = val;
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
if (!((GSR | gsr_bits) & GSR_CDONE))
printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
__FUNCTION__, reg, GSR | gsr_bits);
mutex_unlock(&car_mutex);
}
static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* warm reset broken on Bulverde,
so manually keep AC97 reset high */
pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
udelay(10);
GCR |= GCR_WARM_RST;
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
udelay(500);
#else
GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
#endif
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
__FUNCTION__, gsr_bits);
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
}
static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* PXA27x Developers Manual section 13.5.2.2.1 */
pxa_set_cken(1 << 31, 1);
udelay(5);
pxa_set_cken(1 << 31, 0);
GCR = GCR_COLD_RST;
udelay(50);
#else
GCR = GCR_COLD_RST;
GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
#endif
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
__FUNCTION__, gsr_bits);
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
}
static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
{
long status;
status = GSR;
if (status) {
GSR = status;
gsr_bits |= status;
wake_up(&gsr_wq);
#ifdef CONFIG_PXA27x
/* Although we don't use those we still need to clear them
since they tend to spuriously trigger when MMC is used
(hardware bug? go figure)... */
MISR = MISR_EOC;
PISR = PISR_EOC;
MCSR = MCSR_EOC;
#endif
return IRQ_HANDLED;
}
return IRQ_NONE;
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = pxa2xx_ac97_read,
.write = pxa2xx_ac97_write,
.warm_reset = pxa2xx_ac97_warm_reset,
.reset = pxa2xx_ac97_cold_reset,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
.name = "AC97 PCM Stereo out",
.dev_addr = __PREG(PCDR),
.drcmr = &DRCMRTXPCDR,
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
.name = "AC97 PCM Stereo in",
.dev_addr = __PREG(PCDR),
.drcmr = &DRCMRRXPCDR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
.name = "AC97 Aux PCM (Slot 5) Mono out",
.dev_addr = __PREG(MODR),
.drcmr = &DRCMRTXMODR,
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
.name = "AC97 Aux PCM (Slot 5) Mono in",
.dev_addr = __PREG(MODR),
.drcmr = &DRCMRRXMODR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
.name = "AC97 Mic PCM (Slot 6) Mono in",
.dev_addr = __PREG(MCDR),
.drcmr = &DRCMRRXMCDR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
#ifdef CONFIG_PM
static int pxa2xx_ac97_suspend(struct platform_device *pdev,
struct snd_soc_cpu_dai *dai)
{
GCR |= GCR_ACLINK_OFF;
pxa_set_cken(CKEN2_AC97, 0);
return 0;
}
static int pxa2xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_cpu_dai *dai)
{
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
#ifdef CONFIG_PXA27x
/* Use GPIO 113 as AC97 Reset on Bulverde */
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
#endif
pxa_set_cken(CKEN2_AC97, 1);
return 0;
}
#else
#define pxa2xx_ac97_suspend NULL
#define pxa2xx_ac97_resume NULL
#endif
static int pxa2xx_ac97_probe(struct platform_device *pdev)
{
int ret;
ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
if (ret < 0)
goto err;
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
#ifdef CONFIG_PXA27x
/* Use GPIO 113 as AC97 Reset on Bulverde */
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
#endif
pxa_set_cken(CKEN2_AC97, 1);
return 0;
err:
if (CKEN & CKEN2_AC97) {
GCR |= GCR_ACLINK_OFF;
free_irq(IRQ_AC97, NULL);
pxa_set_cken(CKEN2_AC97, 0);
}
return ret;
}
static void pxa2xx_ac97_remove(struct platform_device *pdev)
{
GCR |= GCR_ACLINK_OFF;
free_irq(IRQ_AC97, NULL);
pxa_set_cken(CKEN2_AC97, 0);
}
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
else
rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
return 0;
}
static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
else
rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
return 0;
}
static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return -ENODEV;
else
rtd->cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
return 0;
}
/*
* There is only 1 physical AC97 interface for pxa2xx, but it
* has extra fifo's that can be used for aux DACs and ADCs.
*/
struct snd_soc_cpu_dai pxa_ac97_dai[] = {
{
.name = "pxa2xx-ac97",
.id = 0,
.type = SND_SOC_DAI_AC97,
.probe = pxa2xx_ac97_probe,
.remove = pxa2xx_ac97_remove,
.suspend = pxa2xx_ac97_suspend,
.resume = pxa2xx_ac97_resume,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
.channels_max = 2,},
.capture = {
.stream_name = "AC97 Capture",
.channels_min = 2,
.channels_max = 2,},
.ops = {
.hw_params = pxa2xx_ac97_hw_params,},
.caps = {
.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
.mode = pxa2xx_ac97_modes,},
},
{
.name = "pxa2xx-ac97-aux",
.id = 1,
.type = SND_SOC_DAI_AC97,
.playback = {
.stream_name = "AC97 Aux Playback",
.channels_min = 1,
.channels_max = 1,},
.capture = {
.stream_name = "AC97 Aux Capture",
.channels_min = 1,
.channels_max = 1,},
.ops = {
.hw_params = pxa2xx_ac97_hw_aux_params,},
.caps = {
.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
.mode = pxa2xx_ac97_modes,},
},
{
.name = "pxa2xx-ac97-mic",
.id = 2,
.type = SND_SOC_DAI_AC97,
.capture = {
.stream_name = "AC97 Mic Capture",
.channels_min = 1,
.channels_max = 1,},
.ops = {
.hw_params = pxa2xx_ac97_hw_mic_params,},
.caps = {
.num_modes = ARRAY_SIZE(pxa2xx_ac97_modes),
.mode = pxa2xx_ac97_modes,},},
};
EXPORT_SYMBOL_GPL(pxa_ac97_dai);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
MODULE_LICENSE("GPL");