microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones 

Separate data-ready configuration parameters for INT1 and INT2 pins in
st_sensor_data_ready_irq data structure. That change will be use to
properly support LIS2DW12 accel sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Lorenzo Bianconi 2017-08-30 13:50:40 +02:00 коммит произвёл Jonathan Cameron
Родитель e72a060151
Коммит 75d4c6d2e1
6 изменённых файлов: 104 добавлений и 61 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

66
drivers/iio/accel/st_accel_core.c
Просмотреть файл

@ -159,9 +159,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x10,
.mask_int2 = 0x00,
.int1 = {
.addr = 0x22,
.mask = 0x10,
},
.addr_ihl = 0x25,
.mask_ihl = 0x02,
.stat_drdy = {
@ -232,9 +233,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x02,
.mask_int2 = 0x10,
.int1 = {
.addr = 0x22,
.mask = 0x02,
},
.int2 = {
.addr = 0x22,
.mask = 0x10,
},
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
@ -319,9 +325,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask = 0x08,
},
.drdy_irq = {
.addr = 0x23,
.mask_int1 = 0x80,
.mask_int2 = 0x00,
.int1 = {
.addr = 0x23,
.mask = 0x80,
},
.addr_ihl = 0x23,
.mask_ihl = 0x40,
.stat_drdy = {
@ -396,8 +403,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask = 0x01,
},
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
.int1 = {
.addr = 0x21,
.mask = 0x04,
},
.stat_drdy = {
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
.mask = 0x07,
@ -456,9 +465,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x04,
.mask_int2 = 0x20,
.int1 = {
.addr = 0x22,
.mask = 0x04,
},
.int2 = {
.addr = 0x22,
.mask = 0x20,
},
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
@ -528,9 +542,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x02,
.mask_int2 = 0x10,
.int1 = {
.addr = 0x22,
.mask = 0x02,
},
.int2 = {
.addr = 0x22,
.mask = 0x10,
},
.addr_ihl = 0x22,
.mask_ihl = 0x80,
},
@ -582,8 +601,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.bdu = {
},
.drdy_irq = {
.addr = 0x21,
.mask_int1 = 0x04,
.int1 = {
.addr = 0x21,
.mask = 0x04,
},
.stat_drdy = {
.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
.mask = 0x07,
@ -653,9 +674,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
},
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x10,
.mask_int2 = 0x00,
.int1 = {
.addr = 0x22,
.mask = 0x10,
},
.addr_ihl = 0x25,
.mask_ihl = 0x02,
.stat_drdy = {

28
drivers/iio/common/st_sensors/st_sensors_core.c
Просмотреть файл

@ -283,7 +283,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
struct st_sensor_data *sdata = iio_priv(indio_dev);
/* Sensor does not support interrupts */
if (sdata->sensor_settings->drdy_irq.addr == 0) {
if (!sdata->sensor_settings->drdy_irq.int1.addr &&
!sdata->sensor_settings->drdy_irq.int2.addr) {
if (pdata->drdy_int_pin)
dev_info(&indio_dev->dev,
"DRDY on pin INT%d specified, but sensor "
@ -294,7 +295,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
switch (pdata->drdy_int_pin) {
case 1:
if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
if (!sdata->sensor_settings->drdy_irq.int1.mask) {
dev_err(&indio_dev->dev,
"DRDY on INT1 not available.\n");
return -EINVAL;
@ -302,7 +303,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
sdata->drdy_int_pin = 1;
break;
case 2:
if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
if (!sdata->sensor_settings->drdy_irq.int2.mask) {
dev_err(&indio_dev->dev,
"DRDY on INT2 not available.\n");
return -EINVAL;
@ -460,10 +461,11 @@ EXPORT_SYMBOL(st_sensors_init_sensor);
int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
{
int err;
u8 drdy_mask;
u8 drdy_addr, drdy_mask;
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (!sdata->sensor_settings->drdy_irq.addr) {
if (!sdata->sensor_settings->drdy_irq.int1.addr &&
!sdata->sensor_settings->drdy_irq.int2.addr) {
/*
* there are some devices (e.g. LIS3MDL) where drdy line is
* routed to a given pin and it is not possible to select a
@ -485,18 +487,20 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
goto st_accel_set_dataready_irq_error;
}
if (sdata->drdy_int_pin == 1)
drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
else
drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
if (sdata->drdy_int_pin == 1) {
drdy_addr = sdata->sensor_settings->drdy_irq.int1.addr;
drdy_mask = sdata->sensor_settings->drdy_irq.int1.mask;
} else {
drdy_addr = sdata->sensor_settings->drdy_irq.int2.addr;
drdy_mask = sdata->sensor_settings->drdy_irq.int2.mask;
}
/* Flag to the poll function that the hardware trigger is in use */
sdata->hw_irq_trigger = enable;
/* Enable/Disable the interrupt generator for data ready. */
err = st_sensors_write_data_with_mask(indio_dev,
sdata->sensor_settings->drdy_irq.addr,
drdy_mask, (int)enable);
err = st_sensors_write_data_with_mask(indio_dev, drdy_addr,
drdy_mask, (int)enable);
st_accel_set_dataready_irq_error:
return err;

18
drivers/iio/gyro/st_gyro_core.c
Просмотреть файл

@ -111,8 +111,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int2 = 0x08,
.int2 = {
.addr = 0x22,
.mask = 0x08,
},
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@ -184,8 +186,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int2 = 0x08,
.int2 = {
.addr = 0x22,
.mask = 0x08,
},
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not
@ -252,8 +256,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
.mask = 0x80,
},
.drdy_irq = {
.addr = 0x22,
.mask_int2 = 0x08,
.int2 = {
.addr = 0x22,
.mask = 0x08,
},
/*
* The sensor has IHL (active low) and open
* drain settings, but only for INT1 and not

6
drivers/iio/magnetometer/st_magn_core.c
Просмотреть файл

@ -362,8 +362,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
.mask = 0x10,
},
.drdy_irq = {
.addr = 0x62,
.mask_int1 = 0x01,
.int1 = {
.addr = 0x62,
.mask = 0x01,
},
.stat_drdy = {
.addr = 0x67,
.mask = 0x07,

31
drivers/iio/pressure/st_pressure_core.c
Просмотреть файл

@ -280,9 +280,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask = 0x04,
},
.drdy_irq = {
.addr = 0x22,
.mask_int1 = 0x04,
.mask_int2 = 0x20,
.int1 = {
.addr = 0x22,
.mask = 0x04,
},
.int2 = {
.addr = 0x22,
.mask = 0x20,
},
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
@ -338,9 +343,6 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.addr = 0x20,
.mask = 0x04,
},
.drdy_irq = {
.addr = 0,
},
.multi_read_bit = true,
.bootime = 2,
},
@ -391,9 +393,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask = 0x04,
},
.drdy_irq = {
.addr = 0x23,
.mask_int1 = 0x01,
.mask_int2 = 0x00,
.int1 = {
.addr = 0x23,
.mask = 0x01,
},
.addr_ihl = 0x22,
.mask_ihl = 0x80,
.addr_od = 0x22,
@ -455,9 +458,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
.mask = 0x02,
},
.drdy_irq = {
.addr = 0x12,
.mask_int1 = 0x04,
.mask_int2 = 0x00,
.int1 = {
.addr = 0x12,
.mask = 0x04,
},
.addr_ihl = 0x12,
.mask_ihl = 0x80,
.addr_od = 0x12,
@ -614,7 +618,8 @@ int st_press_common_probe(struct iio_dev *indio_dev)
press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
/* Some devices don't support a data ready pin. */
if (!pdata && press_data->sensor_settings->drdy_irq.addr)
if (!pdata && (press_data->sensor_settings->drdy_irq.int1.addr ||
press_data->sensor_settings->drdy_irq.int2.addr))
pdata = (struct st_sensors_platform_data *)&default_press_pdata;
err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);

16
include/linux/iio/common/st_sensors.h
Просмотреть файл

@ -132,9 +132,8 @@ struct st_sensor_das {
/**
* struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
* @addr: address of the register.
* @mask_int1: mask to enable/disable IRQ on INT1 pin.
* @mask_int2: mask to enable/disable IRQ on INT2 pin.
* struct int1 - data-ready configuration register for INT1 pin.
* struct int2 - data-ready configuration register for INT2 pin.
* @addr_ihl: address to enable/disable active low on the INT lines.
* @mask_ihl: mask to enable/disable active low on the INT lines.
* @addr_od: address to enable/disable Open Drain on the INT lines.
@ -145,9 +144,14 @@ struct st_sensor_das {
* @en_mask: mask to write the on/off value for enable.
*/
struct st_sensor_data_ready_irq {
u8 addr;
u8 mask_int1;
u8 mask_int2;
struct {
u8 addr;
u8 mask;
} int1;
struct {
u8 addr;
u8 mask;
} int2;
u8 addr_ihl;
u8 mask_ihl;
u8 addr_od;