ASoC: Updates for v4.15

The biggest thing this release has been the conversion of the AC98 bus
 to the driver model, that's been a long time coming so thanks to Robert
 Jarzmik for his dedication there.  Due to there being some AC97 MFD
 there's a few fairly large changes in input and the MFD layer, mainly to
 the wm97xx driver.
 
 There's also some drivers/drm changes to support the new AMD Stoney
 platform, these are shared with the DRM subsystem and should be being
 merged via both.
 
 Within the subsystem the overwhelming bulk of the changes is in the
 Intel drivers which continue to need lots of cleanups and fixes, this
 release they've also gained support for their open source firmware.
 There's also some large changs in the core as Morimoto-san continues to
 mirror operations into the component level in preparation for conversion
 of drivers to that.
 
  - The AC97 bus has finally caught up with the driver model thanks to
    some dedicated and persistent work from Robert Jarzmik.
  - Continued work from Morimoto-san on moving us towards being able to
    use components for everything.
  - Lots of cleanups for the Intel platform code, including support for
    their open source audio firmware.
  - Support for scaling MCLK with sample rate in simple-card.
  - Support for AMD Stoney platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
 WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
 bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
 SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
 iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
 OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
 =5KBY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.15

The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there.  Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.

There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.

Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.

 - The AC97 bus has finally caught up with the driver model thanks to
   some dedicated and persistent work from Robert Jarzmik.
 - Continued work from Morimoto-san on moving us towards being able to
   use components for everything.
 - Lots of cleanups for the Intel platform code, including support for
   their open source audio firmware.
 - Support for scaling MCLK with sample rate in simple-card.
 - Support for AMD Stoney platform.

.mailmap

@@ -15,6 +15,7 @@ Adriana Reus <adi.reus@gmail.com> <adriana.reus@intel.com>
 Alan Cox <alan@lxorguk.ukuu.org.uk>
 Alan Cox <root@hraefn.swansea.linux.org.uk>
 Aleksey Gorelov <aleksey_gorelov@phoenix.com>
+Aleksandar Markovic <aleksandar.markovic@mips.com> <aleksandar.markovic@imgtec.com>
 Al Viro <viro@ftp.linux.org.uk>
 Al Viro <viro@zenIV.linux.org.uk>
 Andreas Herrmann <aherrman@de.ibm.com>
@@ -43,6 +44,7 @@ Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
 David Brownell <david-b@pacbell.net>
 David Woodhouse <dwmw2@shinybook.infradead.org>
+Deng-Cheng Zhu <dengcheng.zhu@mips.com> <dengcheng.zhu@imgtec.com>
 Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
 Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
@@ -100,6 +102,7 @@ Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
+Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Mark Brown <broonie@sirena.org.uk>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
@@ -114,9 +117,11 @@ Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@s-opensource.com>
 Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.com>
 Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
 Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
+Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
 Mayuresh Janorkar <mayur@ti.com>
 Michael Buesch <m@bues.ch>
 Michel Dänzer <michel@tungstengraphics.com>
+Miodrag Dinic <miodrag.dinic@mips.com> <miodrag.dinic@imgtec.com>
 Mitesh shah <mshah@teja.com>
 Mohit Kumar <mohit.kumar@st.com> <mohit.kumar.dhaka@gmail.com>
 Morten Welinder <terra@gnome.org>
@@ -127,6 +132,7 @@ Mythri P K <mythripk@ti.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
+Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>

Documentation/ABI/testing/sysfs-class-remoteproc

@@ -1,6 +1,6 @@
 What:		/sys/class/remoteproc/.../firmware
 Date:		October 2016
-Contact:	Matt Redfearn <matt.redfearn@imgtec.com>
+Contact:	Matt Redfearn <matt.redfearn@mips.com>
 Description:	Remote processor firmware
 
 		Reports the name of the firmware currently loaded to the
@@ -11,7 +11,7 @@ Description:	Remote processor firmware
 
 What:		/sys/class/remoteproc/.../state
 Date:		October 2016
-Contact:	Matt Redfearn <matt.redfearn@imgtec.com>
+Contact:	Matt Redfearn <matt.redfearn@mips.com>
 Description:	Remote processor state
 
 		Reports the state of the remote processor, which will be one of:

Documentation/ABI/testing/sysfs-devices-power

@@ -211,9 +211,7 @@ Description:
 		device, after it has been suspended at run time, from a resume
 		request to the moment the device will be ready to process I/O,
 		in microseconds.  If it is equal to 0, however, this means that
-		the PM QoS resume latency may be arbitrary and the special value
-		"n/a" means that user space cannot accept any resume latency at
-		all for the given device.
+		the PM QoS resume latency may be arbitrary.
 
 		Not all drivers support this attribute.  If it isn't supported,
 		it is not present.

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -65,45 +65,6 @@ Optional properties:
     a value that is out of range for a 16 bit register then the chip default
     will be used. If present exactly five values must be specified.
 
-  - wlf,inmode : A list of INn_MODE register values, where n is the number
-    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
-    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
-    If present, values must be specified less than or equal to the number of
-    input signals. If values less than the number of input signals, elements
-    that have not been specified are set to 0 by default. Entries are:
-    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
-    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
-  - wlf,out-mono : A list of boolean values indicating whether each output is
-    mono or stereo. Position within the list indicates the output affected
-    (eg. First entry in the list corresponds to output 1). A non-zero value
-    indicates a mono output. If present, the number of values should be less
-    than or equal to the number of outputs, if less values are supplied the
-    additional outputs will be treated as stereo.
-
-  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
-    selected from either MICVDD or one of the MICBIAS's, defines
-    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
-    present, the number of values should be less than or equal to the
-    number of inputs, unspecified inputs will use the chip default.
-
-  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
-    each AIF, useful for I2S systems with multiple data lines being mastered.
-    Specify one cell for each AIF to be configured, specify zero for AIFs that
-    should be handled normally.
-    If present, number of cells must be less than or equal to the number of
-    AIFs. If less than the number of AIFs, for cells that have not been
-    specified the corresponding AIFs will be treated as default setting.
-
-  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-      wm8998, wm1814)
-
-  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
-    See the datasheet for values.
-    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
-    wm8998, wm1814)
-
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
@@ -112,6 +73,7 @@ Optional properties:
 Also see child specific device properties:
   Regulator - ../regulator/arizona-regulator.txt
   Extcon    - ../extcon/extcon-arizona.txt
+  Sound     - ../sound/arizona.txt
 
 Example:
 

Documentation/devicetree/bindings/sound/audio-graph-card.txt

@@ -17,6 +17,7 @@ Below are same as Simple-Card.
 - bitclock-master
 - bitclock-inversion
 - frame-inversion
+- mclk-fs
 - dai-tdm-slot-num
 - dai-tdm-slot-width
 - clocks / system-clock-frequency

Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt

@@ -43,7 +43,7 @@ Example 1. Sampling Rate Conversion
 		label = "sound-card";
 		prefix = "codec";
 		routing = "codec Playback", "DAI0 Playback",
-			"codec Playback", "DAI1 Playback";
+			  "DAI0 Capture",   "codec Capture";
 		convert-rate = <48000>;
 
 		dais = <&cpu_port>;
@@ -79,7 +79,8 @@ Example 2. 2 CPU 1 Codec (Mixing)
 		label = "sound-card";
 		prefix = "codec";
 		routing = "codec Playback", "DAI0 Playback",
-			"codec Playback", "DAI1 Playback";
+			  "codec Playback", "DAI1 Playback",
+			  "DAI0 Capture",   "codec Capture";
 		convert-rate = <48000>;
 
 		dais = <&cpu_port0

Documentation/devicetree/bindings/sound/cs42l56.txt

@@ -55,7 +55,7 @@ Example:
 codec: codec@4b {
 	compatible = "cirrus,cs42l56";
 	reg = <0x4b>;
-	gpio-reset = <&gpio 10 0>;
+	cirrus,gpio-nreset = <&gpio 10 0>;
 	cirrus,chgfreq-divisor = <0x05>;
 	cirrus.ain1_ref_cfg;
 	cirrus,micbias-lvl = <5>;

Documentation/devicetree/bindings/sound/rt5514.txt

@@ -1,22 +1,27 @@
 RT5514 audio CODEC
 
-This device supports I2C only.
+This device supports both I2C and SPI.
 
 Required properties:
 
 - compatible : "realtek,rt5514".
 
-- reg : The I2C address of the device.
+- reg : the I2C address of the device for I2C, the chip select
+        number for SPI.
 
 Optional properties:
 
 - clocks: The phandle of the master clock to the CODEC
 - clock-names: Should be "mclk"
 
-- realtek,dmic-init-delay-ms
-  Set the DMIC initial delay (ms) to wait it ready.
+- interrupt-parent: The phandle for the interrupt controller.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+	      depends on the interrupt controller.
 
-Pins on the device (for linking into audio routes) for RT5514:
+- realtek,dmic-init-delay-ms
+  Set the DMIC initial delay (ms) to wait it ready for I2C.
+
+Pins on the device (for linking into audio routes) for I2C:
 
   * DMIC1L
   * DMIC1R

Documentation/devicetree/bindings/sound/rt5663.txt

@@ -19,6 +19,22 @@ Optional properties:
   Based on the different PCB layout, add the manual offset value to
   compensate the DC offset for each L and R channel, and they are different
   between headphone and headset.
+- "realtek,impedance_sensing_num"
+  The matrix row number of the impedance sensing table.
+  If the value is 0, it means the impedance sensing is not supported.
+- "realtek,impedance_sensing_table"
+  The matrix rows of the impedance sensing table are consisted by impedance
+  minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and
+  R channel accordingly. Example is shown as following.
+  <   0    300  7  0xffd160  0xffd1c0  0xff8a10  0xff8ab0
+    301  65535  4  0xffe470  0xffe470  0xffb8e0  0xffb8e0>
+  The first and second column are defined for the impedance range. If the
+  detected impedance value is in the range, then the volume value of the
+  third column will be set to codec. In our codec design, each volume value
+  should compensate different DC offset to avoid the pop sound, and it is
+  also different between headphone and headset. In the example, the
+  "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of
+  impedance in the impedance sensing function.
 
 Pins on the device (for linking into audio routes) for RT5663:
 

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -37,7 +37,7 @@ VDDIO		1.8V		2.5V		3.3V
 
 Example:
 
-codec: sgtl5000@0a {
+codec: sgtl5000@a {
 	compatible = "fsl,sgtl5000";
 	reg = <0x0a>;
 	clocks = <&clks 150>;

Documentation/devicetree/bindings/sound/st,stm32-sai.txt

@@ -10,13 +10,21 @@ Required properties:
   - reg: Base address and size of SAI common register set.
   - clocks: Must contain phandle and clock specifier pairs for each entry
 	in clock-names.
-  - clock-names: Must contain "x8k" and "x11k"
+  - clock-names: Must contain "pclk" "x8k" and "x11k"
+	"pclk": Clock which feeds the peripheral bus interface.
+	        Mandatory for "st,stm32h7-sai" compatible.
+	        Not used for "st,stm32f4-sai" compatible.
 	"x8k": SAI parent clock for sampling rates multiple of 8kHz.
 	"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
   - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
 
 Optional properties:
   - resets: Reference to a reset controller asserting the SAI
+  - st,sync: specify synchronization mode.
+	By default SAI sub-block is in asynchronous mode.
+	This property sets SAI sub-block as slave of another SAI sub-block.
+	Must contain the phandle and index of the sai sub-block providing
+	the synchronization.
 
 SAI subnodes:
 Two subnodes corresponding to SAI sub-block instances A et B can be defined.
@@ -52,8 +60,8 @@ sai1: sai1@40015800 {
 	#size-cells = <1>;
 	ranges = <0 0x40015800 0x400>;
 	reg = <0x40015800 0x4>;
-	clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "x8k", "x11k";
+	clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+	clock-names = "pclk", "x8k", "x11k";
 	interrupts = <87>;
 
 	sai1a: audio-controller@40015804 {

Documentation/devicetree/bindings/sound/tfa9879.txt

@@ -0,0 +1,23 @@
+NXP TFA9879 class-D audio amplifier
+
+Required properties:
+
+- compatible : "nxp,tfa9879"
+
+- reg : the I2C address of the device
+
+Example:
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: tfa9879@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6c>;
+        };
+};
+

Documentation/devicetree/bindings/sound/wlf,arizona.txt

@@ -0,0 +1,53 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists sound specific bindings, see the primary binding
+document:
+  ../mfd/arizona.txt
+
+Optional properties:
+
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input signals. If values less than the number of input signals, elements
+    that have not been specified are set to 0 by default. Entries are:
+    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
+    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
+
+  - wlf,dmic-ref : DMIC reference voltage source for each input, can be
+    selected from either MICVDD or one of the MICBIAS's, defines
+    (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If
+    present, the number of values should be less than or equal to the
+    number of inputs, unspecified inputs will use the chip default.
+
+  - wlf,max-channels-clocked : The maximum number of channels to be clocked on
+    each AIF, useful for I2S systems with multiple data lines being mastered.
+    Specify one cell for each AIF to be configured, specify zero for AIFs that
+    should be handled normally.
+    If present, number of cells must be less than or equal to the number of
+    AIFs. If less than the number of AIFs, for cells that have not been
+    specified the corresponding AIFs will be treated as default setting.
+
+  - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+      wm8998, wm1814)
+
+  - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6).
+    See the datasheet for values.
+    The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997,
+    wm8998, wm1814)
+
+  - wlf,out-volume-limit : The volume limit value that should be applied to each
+    output channel. See the datasheet for exact values. Channels are specified
+    in the order OUT1L, OUT1R, OUT2L, OUT2R, etc.

Documentation/process/kernel-enforcement-statement.rst

@@ -50,8 +50,9 @@ be stronger.
 Except where noted below, we speak only for ourselves, and not for any company
 we might work for today, have in the past, or will in the future.
 
+  - Laura Abbott
   - Bjorn Andersson (Linaro)
-  - Andrea Arcangeli (Red Hat)
+  - Andrea Arcangeli
   - Neil Armstrong
   - Jens Axboe
   - Pablo Neira Ayuso
@@ -60,15 +61,17 @@ we might work for today, have in the past, or will in the future.
   - Felipe Balbi
   - Arnd Bergmann
   - Ard Biesheuvel
-  - Paolo Bonzini (Red Hat)
+  - Tim Bird
+  - Paolo Bonzini
   - Christian Borntraeger
   - Mark Brown (Linaro)
   - Paul Burton
   - Javier Martinez Canillas
   - Rob Clark
   - Jonathan Corbet
+  - Dennis Dalessandro
   - Vivien Didelot (Savoir-faire Linux)
-  - Hans de Goede (Red Hat)
+  - Hans de Goede
   - Mel Gorman (SUSE)
   - Sven Eckelmann
   - Alex Elder (Linaro)
@@ -79,6 +82,7 @@ we might work for today, have in the past, or will in the future.
   - Juergen Gross
   - Shawn Guo
   - Ulf Hansson
+  - Stephen Hemminger (Microsoft)
   - Tejun Heo
   - Rob Herring
   - Masami Hiramatsu
@@ -104,18 +108,21 @@ we might work for today, have in the past, or will in the future.
   - Viresh Kumar
   - Aneesh Kumar K.V
   - Julia Lawall
-  - Doug Ledford (Red Hat)
+  - Doug Ledford
   - Chuck Lever (Oracle)
   - Daniel Lezcano
   - Shaohua Li
-  - Xin Long (Red Hat)
+  - Xin Long
   - Tony Luck
+  - Catalin Marinas (Arm Ltd)
   - Mike Marshall
   - Chris Mason
   - Paul E. McKenney
   - David S. Miller
   - Ingo Molnar
   - Kuninori Morimoto
+  - Trond Myklebust
+  - Martin K. Petersen (Oracle)
   - Borislav Petkov
   - Jiri Pirko
   - Josh Poimboeuf
@@ -124,18 +131,20 @@ we might work for today, have in the past, or will in the future.
   - Joerg Roedel
   - Leon Romanovsky
   - Steven Rostedt (VMware)
-  - Ivan Safonov
+  - Frank Rowand
   - Ivan Safonov
   - Anna Schumaker
   - Jes Sorensen
   - K.Y. Srinivasan
   - Heiko Stuebner
   - Jiri Kosina (SUSE)
+  - Willy Tarreau
   - Dmitry Torokhov
   - Linus Torvalds
   - Thierry Reding
   - Rik van Riel
   - Geert Uytterhoeven (Glider bvba)
+  - Eduardo Valentin (Amazon.com)
   - Daniel Vetter
   - Linus Walleij
   - Richard Weinberger
@@ -145,3 +154,4 @@ we might work for today, have in the past, or will in the future.
   - Masahiro Yamada
   - Wei Yongjun
   - Lv Zheng
+  - Marc Zyngier (Arm Ltd)

Kbuild

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Kbuild for top-level directory of the kernel
 # This file takes care of the following:

Kconfig

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.

MAINTAINERS

@@ -868,7 +868,7 @@ F:	drivers/android/
 F:	drivers/staging/android/
 
 ANDROID GOLDFISH RTC DRIVER
-M:	Miodrag Dinic <miodrag.dinic@imgtec.com>
+M:	Miodrag Dinic <miodrag.dinic@mips.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/rtc/google,goldfish-rtc.txt
 F:	drivers/rtc/rtc-goldfish.c
@@ -6666,7 +6666,7 @@ F:	include/net/ieee802154_netdev.h
 F:	Documentation/networking/ieee802154.txt
 
 IFE PROTOCOL
-M:	Yotam Gigi <yotamg@mellanox.com>
+M:	Yotam Gigi <yotam.gi@gmail.com>
 M:	Jamal Hadi Salim <jhs@mojatatu.com>
 F:	net/ife
 F:	include/net/ife.h
@@ -6728,7 +6728,7 @@ S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
 IMGTEC ASCII LCD DRIVER
-M:	Paul Burton <paul.burton@imgtec.com>
+M:	Paul Burton <paul.burton@mips.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
@@ -8738,7 +8738,7 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 
 MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
-M:	Yotam Gigi <yotamg@mellanox.com>
+M:	mlxsw@mellanox.com
 L:	netdev@vger.kernel.org
 S:	Supported
 W:	http://www.mellanox.com
@@ -8988,7 +8988,7 @@ F:	Documentation/mips/
 F:	arch/mips/
 
 MIPS BOSTON DEVELOPMENT BOARD
-M:	Paul Burton <paul.burton@imgtec.com>
+M:	Paul Burton <paul.burton@mips.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -8998,7 +8998,7 @@ F:	drivers/clk/imgtec/clk-boston.c
 F:	include/dt-bindings/clock/boston-clock.h
 
 MIPS GENERIC PLATFORM
-M:	Paul Burton <paul.burton@imgtec.com>
+M:	Paul Burton <paul.burton@mips.com>
 L:	linux-mips@linux-mips.org
 S:	Supported
 F:	arch/mips/generic/
@@ -9014,7 +9014,7 @@ F:	drivers/*/*loongson1*
 F:	drivers/*/*/*loongson1*
 
 MIPS RINT INSTRUCTION EMULATION
-M:	Aleksandar Markovic <aleksandar.markovic@imgtec.com>
+M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
 L:	linux-mips@linux-mips.org
 S:	Supported
 F:	arch/mips/math-emu/sp_rint.c
@@ -10672,10 +10672,9 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PISTACHIO SOC SUPPORT
-M:	James Hartley <james.hartley@imgtec.com>
-M:	Ionela Voinescu <ionela.voinescu@imgtec.com>
+M:	James Hartley <james.hartley@sondrel.com>
 L:	linux-mips@linux-mips.org
-S:	Maintained
+S:	Odd Fixes
 F:	arch/mips/pistachio/
 F:	arch/mips/include/asm/mach-pistachio/
 F:	arch/mips/boot/dts/img/pistachio*
@@ -10879,7 +10878,7 @@ S:	Maintained
 F:	drivers/block/ps3vram.c
 
 PSAMPLE PACKET SAMPLING SUPPORT:
-M:	Yotam Gigi <yotamg@mellanox.com>
+M:	Yotam Gigi <yotam.gi@gmail.com>
 S:	Maintained
 F:	net/psample
 F:	include/net/psample.h
@@ -14587,6 +14586,7 @@ F:	Documentation/devicetree/bindings/extcon/extcon-arizona.txt
 F:	Documentation/devicetree/bindings/regulator/arizona-regulator.txt
 F:	Documentation/devicetree/bindings/mfd/arizona.txt
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
+F:	Documentation/devicetree/bindings/sound/wlf,arizona.txt
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
 F:	drivers/extcon/extcon-arizona.c

Makefile

@@ -1,7 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
 VERSION = 4
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/Kconfig

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # General architecture dependent options
 #

arch/alpha/Kconfig

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 config ALPHA
 	bool
 	default y

arch/alpha/Kconfig.debug

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 menu "Kernel hacking"
 
 source "lib/Kconfig.debug"

arch/alpha/boot/bootloader.lds

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 OUTPUT_FORMAT("elf64-alpha")
 ENTRY(__start)
 printk = srm_printk;

arch/alpha/boot/bootp.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/bootp.c
  *

arch/alpha/boot/bootpz.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/bootpz.c
  *

arch/alpha/boot/head.S

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * arch/alpha/boot/head.S
  *

arch/alpha/boot/main.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/main.c
  *

arch/alpha/boot/misc.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * misc.c
  * 

arch/alpha/boot/tools/mkbb.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* This utility makes a bootblock suitable for the SRM console/miniloader */
 
 /* Usage:

arch/alpha/boot/tools/objstrip.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/alpha/boot/tools/objstrip.c
  *

arch/alpha/include/asm/Kbuild

@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 
 
 generic-y += clkdev.h

arch/alpha/include/asm/a.out.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_A_OUT_H__
 #define __ALPHA_A_OUT_H__
 

arch/alpha/include/asm/agp.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef AGP_H
 #define AGP_H 1
 

arch/alpha/include/asm/agp_backend.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_AGP_BACKEND_H
 #define _ALPHA_AGP_BACKEND_H 1
 

arch/alpha/include/asm/atomic.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_ATOMIC_H
 #define _ALPHA_ATOMIC_H
 

arch/alpha/include/asm/barrier.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __BARRIER_H
 #define __BARRIER_H
 

arch/alpha/include/asm/bitops.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_BITOPS_H
 #define _ALPHA_BITOPS_H
 

arch/alpha/include/asm/bug.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_BUG_H
 #define _ALPHA_BUG_H
 

arch/alpha/include/asm/cache.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/cache.h
  */

arch/alpha/include/asm/cacheflush.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CACHEFLUSH_H
 #define _ALPHA_CACHEFLUSH_H
 

arch/alpha/include/asm/checksum.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CHECKSUM_H
 #define _ALPHA_CHECKSUM_H
 

arch/alpha/include/asm/cmpxchg.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_CMPXCHG_H
 #define _ALPHA_CMPXCHG_H
 

arch/alpha/include/asm/compiler.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_COMPILER_H
 #define __ALPHA_COMPILER_H
 

arch/alpha/include/asm/console.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __AXP_CONSOLE_H
 #define __AXP_CONSOLE_H
 

arch/alpha/include/asm/core_apecs.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_APECS__H__
 #define __ALPHA_APECS__H__
 

arch/alpha/include/asm/core_cia.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_CIA__H__
 #define __ALPHA_CIA__H__
 

arch/alpha/include/asm/core_irongate.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_IRONGATE__H__
 #define __ALPHA_IRONGATE__H__
 

arch/alpha/include/asm/core_lca.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_LCA__H__
 #define __ALPHA_LCA__H__
 

arch/alpha/include/asm/core_marvel.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Marvel systems use the IO7 I/O chip provides PCI/PCIX/AGP access
  *

arch/alpha/include/asm/core_mcpcia.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MCPCIA__H__
 #define __ALPHA_MCPCIA__H__
 

arch/alpha/include/asm/core_polaris.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_POLARIS__H__
 #define __ALPHA_POLARIS__H__
 

arch/alpha/include/asm/core_t2.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_T2__H__
 #define __ALPHA_T2__H__
 

arch/alpha/include/asm/core_titan.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_TITAN__H__
 #define __ALPHA_TITAN__H__
 

arch/alpha/include/asm/core_tsunami.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_TSUNAMI__H__
 #define __ALPHA_TSUNAMI__H__
 

arch/alpha/include/asm/core_wildfire.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_WILDFIRE__H__
 #define __ALPHA_WILDFIRE__H__
 

arch/alpha/include/asm/delay.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_DELAY_H
 #define __ALPHA_DELAY_H
 

arch/alpha/include/asm/dma-mapping.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_DMA_MAPPING_H
 #define _ALPHA_DMA_MAPPING_H
 

arch/alpha/include/asm/dma.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/dma.h
  *

arch/alpha/include/asm/elf.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_ALPHA_ELF_H
 #define __ASM_ALPHA_ELF_H
 

arch/alpha/include/asm/err_common.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *	linux/include/asm-alpha/err_common.h
  *

arch/alpha/include/asm/err_ev7.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_ERR_EV7_H
 #define __ALPHA_ERR_EV7_H 1
 

arch/alpha/include/asm/extable.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASM_EXTABLE_H
 #define _ASM_EXTABLE_H
 

arch/alpha/include/asm/fpu.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 

arch/alpha/include/asm/futex.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASM_ALPHA_FUTEX_H
 #define _ASM_ALPHA_FUTEX_H
 

arch/alpha/include/asm/gct.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_GCT_H
 #define __ALPHA_GCT_H
 

arch/alpha/include/asm/hardirq.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_HARDIRQ_H
 #define _ALPHA_HARDIRQ_H
 

arch/alpha/include/asm/hw_irq.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_HW_IRQ_H
 #define _ALPHA_HW_IRQ_H
 

arch/alpha/include/asm/hwrpb.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_HWRPB_H
 #define __ALPHA_HWRPB_H
 

arch/alpha/include/asm/io.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_IO_H
 #define __ALPHA_IO_H
 

arch/alpha/include/asm/io_trivial.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* Trivial implementations of basic i/o routines.  Assumes that all
    of the hard work has been done by ioremap and ioportmap, and that
    access to i/o space is linear.  */

arch/alpha/include/asm/irq.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_IRQ_H
 #define _ALPHA_IRQ_H
 

arch/alpha/include/asm/irqflags.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_IRQFLAGS_H
 #define __ALPHA_IRQFLAGS_H
 

arch/alpha/include/asm/jensen.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_JENSEN_H
 #define __ALPHA_JENSEN_H
 

arch/alpha/include/asm/kmap_types.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASM_KMAP_TYPES_H
 #define _ASM_KMAP_TYPES_H
 

arch/alpha/include/asm/linkage.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 

arch/alpha/include/asm/local.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_LOCAL_H
 #define _ALPHA_LOCAL_H
 

arch/alpha/include/asm/machvec.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MACHVEC_H
 #define __ALPHA_MACHVEC_H 1
 

arch/alpha/include/asm/mc146818rtc.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Machine dependent access functions for RTC registers.
  */

arch/alpha/include/asm/mce.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MCE_H
 #define __ALPHA_MCE_H
 

arch/alpha/include/asm/mmu.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MMU_H
 #define __ALPHA_MMU_H
 

arch/alpha/include/asm/mmu_context.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_MMU_CONTEXT_H
 #define __ALPHA_MMU_CONTEXT_H
 

arch/alpha/include/asm/mmzone.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
  * Adapted for the alpha wildfire architecture Jan 2001.

arch/alpha/include/asm/module.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_MODULE_H
 #define _ALPHA_MODULE_H
 

arch/alpha/include/asm/page.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_PAGE_H
 #define _ALPHA_PAGE_H
 

arch/alpha/include/asm/pal.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_PAL_H
 #define __ALPHA_PAL_H
 

arch/alpha/include/asm/param.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASM_ALPHA_PARAM_H
 #define _ASM_ALPHA_PARAM_H
 

arch/alpha/include/asm/parport.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * parport.h: platform-specific PC-style parport initialisation
  *

arch/alpha/include/asm/pci.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_PCI_H
 #define __ALPHA_PCI_H
 

arch/alpha/include/asm/percpu.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
 

arch/alpha/include/asm/pgalloc.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_PGALLOC_H
 #define _ALPHA_PGALLOC_H
 

arch/alpha/include/asm/pgtable.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_PGTABLE_H
 #define _ALPHA_PGTABLE_H
 

arch/alpha/include/asm/processor.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/processor.h
  *

arch/alpha/include/asm/ptrace.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASMAXP_PTRACE_H
 #define _ASMAXP_PTRACE_H
 

arch/alpha/include/asm/rwsem.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_RWSEM_H
 #define _ALPHA_RWSEM_H
 

arch/alpha/include/asm/serial.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * include/asm-alpha/serial.h
  */

arch/alpha/include/asm/shmparam.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASMAXP_SHMPARAM_H
 #define _ASMAXP_SHMPARAM_H
 

arch/alpha/include/asm/signal.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASMAXP_SIGNAL_H
 #define _ASMAXP_SIGNAL_H
 

arch/alpha/include/asm/smp.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 

arch/alpha/include/asm/socket.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ASM_SOCKET_H
 #define _ASM_SOCKET_H
 

arch/alpha/include/asm/special_insns.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __ALPHA_SPECIAL_INSNS_H
 #define __ALPHA_SPECIAL_INSNS_H
 

arch/alpha/include/asm/spinlock.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #ifndef _ALPHA_SPINLOCK_H
 #define _ALPHA_SPINLOCK_H