From 767727b927aa48e429c6fa92d4b55cc235fffe95 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 18 May 2020 18:33:00 +0200 Subject: [PATCH] mtd: rawnand: Remove the cmx270 NAND controller driver The CM-X270 board has been removed, we can remove the custom NAND driver as well. Signed-off-by: Boris Brezillon Acked-by: Robert Jarzmik Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20200518163300.304732-1-boris.brezillon@collabora.com --- drivers/mtd/nand/raw/Kconfig | 4 - drivers/mtd/nand/raw/Makefile | 1 - drivers/mtd/nand/raw/cmx270_nand.c | 236 ----------------------------- 3 files changed, 241 deletions(-) delete mode 100644 drivers/mtd/nand/raw/cmx270_nand.c diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index a80a46bb5b8b..9b08a58ae88e 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -213,10 +213,6 @@ config MTD_NAND_MLC_LPC32XX Please check the actual NAND chip connected and its support by the MLC NAND controller. -config MTD_NAND_CM_X270 - tristate "CM-X270 modules NAND controller" - depends on MACH_ARMCORE - config MTD_NAND_PASEMI tristate "PA Semi PWRficient NAND controller" depends on PPC_PASEMI diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index 2d136b158fb7..a817052286c7 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o omap2_nand-objs := omap2.o obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o -obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_MARVELL) += marvell_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o diff --git a/drivers/mtd/nand/raw/cmx270_nand.c b/drivers/mtd/nand/raw/cmx270_nand.c deleted file mode 100644 index 045b6175ae79..000000000000 --- a/drivers/mtd/nand/raw/cmx270_nand.c +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2006 Compulab, Ltd. - * Mike Rapoport - * - * Derived from drivers/mtd/nand/h1910.c (removed in v3.10) - * Copyright (C) 2002 Marius Gröger (mag@sysgo.de) - * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) - * - * Overview: - * This is a device driver for the NAND flash device found on the - * CM-X270 board. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#define GPIO_NAND_CS (11) -#define GPIO_NAND_RB (89) - -/* MTD structure for CM-X270 board */ -static struct mtd_info *cmx270_nand_mtd; - -/* remaped IO address of the device */ -static void __iomem *cmx270_nand_io; - -/* - * Define static partitions for flash device - */ -static const struct mtd_partition partition_info[] = { - [0] = { - .name = "cmx270-0", - .offset = 0, - .size = MTDPART_SIZ_FULL - } -}; -#define NUM_PARTITIONS (ARRAY_SIZE(partition_info)) - -static u_char cmx270_read_byte(struct nand_chip *this) -{ - return (readl(this->legacy.IO_ADDR_R) >> 16); -} - -static void cmx270_write_buf(struct nand_chip *this, const u_char *buf, - int len) -{ - int i; - - for (i=0; ilegacy.IO_ADDR_W); -} - -static void cmx270_read_buf(struct nand_chip *this, u_char *buf, int len) -{ - int i; - - for (i=0; ilegacy.IO_ADDR_R) >> 16; -} - -static inline void nand_cs_on(void) -{ - gpio_set_value(GPIO_NAND_CS, 0); -} - -static void nand_cs_off(void) -{ - dsb(); - - gpio_set_value(GPIO_NAND_CS, 1); -} - -/* - * hardware specific access to control-lines - */ -static void cmx270_hwcontrol(struct nand_chip *this, int dat, - unsigned int ctrl) -{ - unsigned int nandaddr = (unsigned int)this->legacy.IO_ADDR_W; - - dsb(); - - if (ctrl & NAND_CTRL_CHANGE) { - if ( ctrl & NAND_ALE ) - nandaddr |= (1 << 3); - else - nandaddr &= ~(1 << 3); - if ( ctrl & NAND_CLE ) - nandaddr |= (1 << 2); - else - nandaddr &= ~(1 << 2); - if ( ctrl & NAND_NCE ) - nand_cs_on(); - else - nand_cs_off(); - } - - dsb(); - this->legacy.IO_ADDR_W = (void __iomem*)nandaddr; - if (dat != NAND_CMD_NONE) - writel((dat << 16), this->legacy.IO_ADDR_W); - - dsb(); -} - -/* - * read device ready pin - */ -static int cmx270_device_ready(struct nand_chip *this) -{ - dsb(); - - return (gpio_get_value(GPIO_NAND_RB)); -} - -/* - * Main initialization routine - */ -static int __init cmx270_init(void) -{ - struct nand_chip *this; - int ret; - - if (!(machine_is_armcore() && cpu_is_pxa27x())) - return -ENODEV; - - ret = gpio_request(GPIO_NAND_CS, "NAND CS"); - if (ret) { - pr_warn("CM-X270: failed to request NAND CS gpio\n"); - return ret; - } - - gpio_direction_output(GPIO_NAND_CS, 1); - - ret = gpio_request(GPIO_NAND_RB, "NAND R/B"); - if (ret) { - pr_warn("CM-X270: failed to request NAND R/B gpio\n"); - goto err_gpio_request; - } - - gpio_direction_input(GPIO_NAND_RB); - - /* Allocate memory for MTD device structure and private data */ - this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL); - if (!this) { - ret = -ENOMEM; - goto err_kzalloc; - } - - cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12); - if (!cmx270_nand_io) { - pr_debug("Unable to ioremap NAND device\n"); - ret = -EINVAL; - goto err_ioremap; - } - - cmx270_nand_mtd = nand_to_mtd(this); - - /* Link the private data with the MTD structure */ - cmx270_nand_mtd->owner = THIS_MODULE; - - /* insert callbacks */ - this->legacy.IO_ADDR_R = cmx270_nand_io; - this->legacy.IO_ADDR_W = cmx270_nand_io; - this->legacy.cmd_ctrl = cmx270_hwcontrol; - this->legacy.dev_ready = cmx270_device_ready; - - /* 15 us command delay time */ - this->legacy.chip_delay = 20; - this->ecc.mode = NAND_ECC_SOFT; - this->ecc.algo = NAND_ECC_HAMMING; - - /* read/write functions */ - this->legacy.read_byte = cmx270_read_byte; - this->legacy.read_buf = cmx270_read_buf; - this->legacy.write_buf = cmx270_write_buf; - - /* Scan to find existence of the device */ - ret = nand_scan(this, 1); - if (ret) { - pr_notice("No NAND device\n"); - goto err_scan; - } - - /* Register the partitions */ - ret = mtd_device_register(cmx270_nand_mtd, partition_info, - NUM_PARTITIONS); - if (ret) - goto err_scan; - - /* Return happy */ - return 0; - -err_scan: - iounmap(cmx270_nand_io); -err_ioremap: - kfree(this); -err_kzalloc: - gpio_free(GPIO_NAND_RB); -err_gpio_request: - gpio_free(GPIO_NAND_CS); - - return ret; - -} -module_init(cmx270_init); - -/* - * Clean up routine - */ -static void __exit cmx270_cleanup(void) -{ - /* Release resources, unregister device */ - nand_release(mtd_to_nand(cmx270_nand_mtd)); - - gpio_free(GPIO_NAND_RB); - gpio_free(GPIO_NAND_CS); - - iounmap(cmx270_nand_io); - - kfree(mtd_to_nand(cmx270_nand_mtd)); -} -module_exit(cmx270_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mike Rapoport "); -MODULE_DESCRIPTION("NAND flash driver for Compulab CM-X270 Module");