arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes

A test with the command below gives for example this error:

arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5d0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ohci', so remove them.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -895,7 +895,6 @@
 		reg = <0x0 0xff350000 0x0 0x10000>;
 		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
-		clock-names = "usbhost";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -979,7 +979,6 @@
 		reg = <0x0 0xff5d0000 0x0 0x10000>;
 		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST0>, <&u2phy>;
-		clock-names = "usbhost", "utmi";
 		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -361,8 +361,6 @@
 		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
 			 <&u2phy0>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy0_host>;
 		phy-names = "usb";
 		status = "disabled";
@@ -385,8 +383,6 @@
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
 			 <&u2phy1>;
-		clock-names = "usbhost", "arbiter",
-			      "utmi";
 		phys = <&u2phy1_host>;
 		phy-names = "usb";
 		status = "disabled";