arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes

A test with the command below gives for example this error:

arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff5d0000:
'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'

'clock-names' is not a valid property name for usb_host nodes with
compatible string 'generic-ohci', so remove them.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/generic-ohci.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200312171441.21144-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Johan Jonker 2020-03-12 18:14:41 +01:00 коммит произвёл Heiko Stuebner
Родитель 6a92e52bae
Коммит 77460b3d7d
3 изменённых файлов: 0 добавлений и 6 удалений

Просмотреть файл

@ -895,7 +895,6 @@
reg = <0x0 0xff350000 0x0 0x10000>; reg = <0x0 0xff350000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>; clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
phys = <&u2phy_host>; phys = <&u2phy_host>;
phy-names = "usb"; phy-names = "usb";
power-domains = <&power PX30_PD_USB>; power-domains = <&power PX30_PD_USB>;

Просмотреть файл

@ -979,7 +979,6 @@
reg = <0x0 0xff5d0000 0x0 0x10000>; reg = <0x0 0xff5d0000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST0>, <&u2phy>; clocks = <&cru HCLK_HOST0>, <&u2phy>;
clock-names = "usbhost", "utmi";
phys = <&u2phy_host>; phys = <&u2phy_host>;
phy-names = "usb"; phy-names = "usb";
status = "disabled"; status = "disabled";

Просмотреть файл

@ -361,8 +361,6 @@
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
<&u2phy0>; <&u2phy0>;
clock-names = "usbhost", "arbiter",
"utmi";
phys = <&u2phy0_host>; phys = <&u2phy0_host>;
phy-names = "usb"; phy-names = "usb";
status = "disabled"; status = "disabled";
@ -385,8 +383,6 @@
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>, clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
<&u2phy1>; <&u2phy1>;
clock-names = "usbhost", "arbiter",
"utmi";
phys = <&u2phy1_host>; phys = <&u2phy1_host>;
phy-names = "usb"; phy-names = "usb";
status = "disabled"; status = "disabled";