microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-scsi: use print_hex_dump from <linux/kernel.h>
  ide: More TSST drives with broken cable detection
  ali14xx: constify __initdata
  ide: remove bogus ide_fix_driveid() comment
  trm290: remove bogus init_hwif_trm290() comment
  piix: add HP compaq laptop to short cable list
  alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  amd74xx: arm hack
  drivers/ide: Add missing "space"
  ide-cris: don't override ide_register_hw() result
  ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  ide: add CONFIG_IDE_H8300 config option
  ide/Kconfig: fix mpc8xx host driver dependencies
  macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  aec62xx: Fix kernel oops in driver's probe function
  ide: skip ide_wait_not_busy() on noprobe-disks
  siimage: remove resetproc() method
  ide: don't set PIO mode on pre-EIDE drives
  sis5513.c: Add Packard Bell EasyNote K5305 to laptops
This commit is contained in:
Linus Torvalds 2007-11-27 14:29:03 -08:00
Родитель 2ea0718884 6413f08666
Коммит 7749c90259
19 изменённых файлов: 112 добавлений и 142 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

39
arch/cris/arch-v10/drivers/Kconfig
Просмотреть файл

@ -542,45 +542,6 @@ config ETRAX_RS485_DISABLE_RECEIVER
loopback. Not all products are able to do this in software only.
Axis 2400/2401 must disable receiver.
config ETRAX_IDE
bool "ATA/IDE support"
select IDE
select BLK_DEV_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
select IDE_GENERIC
help
Enable this to get support for ATA/IDE.
You can't use parallel ports or SCSI ports
at the same time.
config ETRAX_IDE_DELAY
int "Delay for drives to regain consciousness"
depends on ETRAX_IDE
default 15
help
Number of seconds to wait for IDE drives to spin up after an IDE
reset.
choice
prompt "IDE reset pin"
depends on ETRAX_IDE
default ETRAX_IDE_PB7_RESET
config ETRAX_IDE_PB7_RESET
bool "Port_PB_Bit_7"
help
IDE reset on pin 7 on port B
config ETRAX_IDE_G27_RESET
bool "Port_G_Bit_27"
help
IDE reset on pin 27 on port G
endchoice
config ETRAX_USB_HOST
bool "USB host"
select USB

12
arch/cris/arch-v32/drivers/Kconfig
Просмотреть файл

@ -582,18 +582,6 @@ config ETRAX_PE_CHANGEABLE_BITS
that a user can change the value on using ioctl's.
Bit set = changeable.
config ETRAX_IDE
bool "ATA/IDE support"
depends on ETRAX_ARCH_V32
select IDE
select BLK_DEV_IDE
select BLK_DEV_IDEDISK
select BLK_DEV_IDECD
select BLK_DEV_IDEDMA
select IDE_GENERIC
help
Enables the ETRAX IDE driver.
config ETRAX_CARDBUS
bool "Cardbus support"
depends on ETRAX_ARCH_V32

47
drivers/ide/Kconfig
Просмотреть файл

@ -313,7 +313,6 @@ comment "IDE chipset support/bugfixes"
config IDE_GENERIC
tristate "generic/default IDE chipset support"
default H8300
help
If unsure, say N.
@ -484,6 +483,7 @@ config WDC_ALI15X3
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
depends on !ARM
select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for AMD-7xx and AMD-8111 chips
@ -883,6 +883,49 @@ config BLK_DEV_IDE_BAST
Say Y here if you want to support the onboard IDE channels on the
Simtec BAST or the Thorcom VR1000
config ETRAX_IDE
bool "ETRAX IDE support"
depends on CRIS && BROKEN
select BLK_DEV_IDEDMA
select IDE_GENERIC
help
Enables the ETRAX IDE driver.
You can't use parallel ports or SCSI ports at the same time.
config ETRAX_IDE_DELAY
int "Delay for drives to regain consciousness"
depends on ETRAX_IDE && ETRAX_ARCH_V10
default 15
help
Number of seconds to wait for IDE drives to spin up after an IDE
reset.
choice
prompt "IDE reset pin"
depends on ETRAX_IDE && ETRAX_ARCH_V10
default ETRAX_IDE_PB7_RESET
config ETRAX_IDE_PB7_RESET
bool "Port_PB_Bit_7"
help
IDE reset on pin 7 on port B
config ETRAX_IDE_G27_RESET
bool "Port_G_Bit_27"
help
IDE reset on pin 27 on port G
endchoice
config IDE_H8300
bool "H8300 IDE support"
depends on H8300
select IDE_GENERIC
default y
help
Enables the H8300 IDE driver.
config BLK_DEV_GAYLE
bool "Amiga Gayle IDE interface support"
depends on AMIGA
@ -963,7 +1006,7 @@ config BLK_DEV_Q40IDE
config BLK_DEV_MPC8xx_IDE
bool "MPC8xx IDE support"
depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE
select IDE_GENERIC
help
This option provides support for IDE on Motorola MPC8xx Systems.

2
drivers/ide/Makefile
Просмотреть файл

@ -39,7 +39,7 @@ ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
# built-in only drivers from h8300/
ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
ide-core-$(CONFIG_IDE_H8300) += h8300/ide-h8300.o
obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o

7
drivers/ide/cris/ide-cris.c
Просмотреть файл

@ -773,15 +773,16 @@ init_e100_ide (void)
/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0);
/* first fill in some stuff in the ide_hwifs fields */
for (h = 0; h < 4; h++) {
ide_hwif_t *hwif = NULL;
for(h = 0; h < MAX_HWIFS; h++) {
ide_hwif_t *hwif = &ide_hwifs[h];
ide_setup_ports(&hw, cris_ide_base_address(h),
ide_offsets,
0, 0, cris_ide_ack_intr,
ide_default_irq(0));
ide_register_hw(&hw, NULL, 1, &hwif);
if (hwif == NULL)
continue;
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;

1
drivers/ide/ide-dma.c
Просмотреть файл

@ -130,6 +130,7 @@ static const struct drive_list_entry drive_blacklist [] = {
{ "_NEC DV5800A", NULL },
{ "SAMSUNG CD-ROM SN-124", "N001" },
{ "Seagate STT20000A", NULL },
{ "CD-ROM CDR_U200", "1.09" },
{ NULL , NULL }
};

13
drivers/ide/ide-iops.c
Просмотреть файл

@ -303,9 +303,6 @@ void default_hwif_transport(ide_hwif_t *hwif)
hwif->atapi_output_bytes = atapi_output_bytes;
}
/*
* Beginning of Taskfile OPCODE Library and feature sets.
*/
void ide_fix_driveid (struct hd_driveid *id)
{
#ifndef __LITTLE_ENDIAN
@ -592,6 +589,9 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
static const struct drive_list_entry ivb_list[] = {
{ "QUANTUM FIREBALLlct10 05" , "A03.0900" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202J" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202N" , "SB01" },
{ NULL , NULL }
};
@ -756,7 +756,7 @@ int ide_driveid_update(ide_drive_t *drive)
int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
int error;
int error = 0;
u8 stat;
// while (HWGROUP(drive)->busy)
@ -767,6 +767,10 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
hwif->dma_host_off(drive);
#endif
/* Skip setting PIO flow-control modes on pre-EIDE drives */
if ((speed & 0xf8) == XFER_PIO_0 && !(drive->id->capability & 0x08))
goto skip;
/*
* Don't use ide_wait_cmd here - it will
* attempt to set_geometry and recalibrate,
@ -814,6 +818,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
drive->id->dma_mword &= ~0x0F00;
drive->id->dma_1word &= ~0x0F00;
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
if (speed >= XFER_SW_DMA_0)
hwif->dma_host_on(drive);

32
drivers/ide/ide-probe.c
Просмотреть файл

@ -644,7 +644,7 @@ static void hwif_register (ide_hwif_t *hwif)
static int wait_hwif_ready(ide_hwif_t *hwif)
{
int rc;
int unit, rc;
printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name);
@ -661,20 +661,26 @@ static int wait_hwif_ready(ide_hwif_t *hwif)
return rc;
/* Now make sure both master & slave are ready */
SELECT_DRIVE(&hwif->drives[0]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
return rc;
SELECT_DRIVE(&hwif->drives[1]);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
goto out;
} else
printk(KERN_DEBUG "%s: ide_wait_not_busy() skipped\n",
drive->name);
}
out:
/* Exit function with master reselected (let's be sane) */
SELECT_DRIVE(&hwif->drives[0]);
if (unit)
SELECT_DRIVE(&hwif->drives[0]);
return rc;
}

7
drivers/ide/legacy/ali14xx.c
Просмотреть файл

@ -53,12 +53,13 @@
/* port addresses for auto-detection */
#define ALI_NUM_PORTS 4
static int ports[ALI_NUM_PORTS] __initdata = {0x074, 0x0f4, 0x034, 0x0e4};
static const int ports[ALI_NUM_PORTS] __initdata =
{ 0x074, 0x0f4, 0x034, 0x0e4 };
/* register initialization data */
typedef struct { u8 reg, data; } RegInitializer;
static RegInitializer initData[] __initdata = {
static const RegInitializer initData[] __initdata = {
{0x01, 0x0f}, {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x00},
{0x05, 0x00}, {0x06, 0x00}, {0x07, 0x2b}, {0x0a, 0x0f},
{0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00},
@ -177,7 +178,7 @@ static int __init findPort (void)
* Initialize controller registers with default values.
*/
static int __init initRegisters (void) {
RegInitializer *p;
const RegInitializer *p;
u8 t;
unsigned long flags;

2
drivers/ide/legacy/macide.c
Просмотреть файл

@ -81,7 +81,7 @@ int macide_ack_intr(ide_hwif_t* hwif)
* Probe for a Macintosh IDE interface
*/
void macide_init(void)
void __init macide_init(void)
{
hw_regs_t hw;
ide_hwif_t *hwif;

2
drivers/ide/legacy/q40ide.c
Просмотреть файл

@ -111,7 +111,7 @@ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={
* Probe for Q40 IDE interfaces
*/
void q40ide_init(void)
void __init q40ide_init(void)
{
int i;
ide_hwif_t *hwif;

11
drivers/ide/pci/aec62xx.c
Просмотреть файл

@ -260,6 +260,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
{
struct ide_port_info d;
u8 idx = id->driver_data;
int err;
err = pci_enable_device(dev);
if (err)
return err;
d = aec62xx_chipsets[idx];
@ -272,7 +277,11 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
}
}
return ide_setup_pci_device(dev, &d);
err = ide_setup_pci_device(dev, &d);
if (err)
pci_disable_device(dev);
return err;
}
static const struct pci_device_id aec62xx_pci_tbl[] = {

5
drivers/ide/pci/alim15x3.c
Просмотреть файл

@ -603,6 +603,11 @@ static int ali_cable_override(struct pci_dev *pdev)
pdev->subsystem_device == 0x10AF)
return 1;
/* Mitac 8317 (Winbook-A) and relatives */
if (pdev->subsystem_vendor == 0x1071 &&
pdev->subsystem_device == 0x8317)
return 1;
/* Systems by DMI */
if (dmi_check_system(cable_dmi_table))
return 1;

1
drivers/ide/pci/piix.c
Просмотреть файл

@ -306,6 +306,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
/* end marker */
{ 0, }

45
drivers/ide/pci/siimage.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/drivers/ide/pci/siimage.c Version 1.18 Oct 18 2007
* linux/drivers/ide/pci/siimage.c Version 1.19 Nov 16 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
@ -459,48 +459,6 @@ static void sil_sata_pre_reset(ide_drive_t *drive)
}
}
/**
* siimage_reset - reset a device on an siimage controller
* @drive: drive to reset
*
* Perform a controller level reset fo the device. For
* SATA we must also check the PHY.
*/
static void siimage_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 reset = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio) {
reset = hwif->INB(addr);
hwif->OUTB((reset|0x03), addr);
/* FIXME:posting */
udelay(25);
hwif->OUTB(reset, addr);
(void) hwif->INB(addr);
} else {
pci_read_config_byte(hwif->pci_dev, addr, &reset);
pci_write_config_byte(hwif->pci_dev, addr, reset|0x03);
udelay(25);
pci_write_config_byte(hwif->pci_dev, addr, reset);
pci_read_config_byte(hwif->pci_dev, addr, &reset);
}
if (SATA_STATUS_REG) {
/* SATA_STATUS_REG is valid only when in MMIO mode */
u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG);
printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n",
hwif->name, sata_stat, __FUNCTION__);
if (!(sata_stat)) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
hwif->name, sata_stat);
drive->failures++;
}
}
}
/**
* proc_reports_siimage - add siimage controller to proc
* @dev: PCI device
@ -857,7 +815,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
{
u8 sata = is_sata(hwif);
hwif->resetproc = &siimage_reset;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;

1
drivers/ide/pci/sis5513.c
Просмотреть файл

@ -526,6 +526,7 @@ static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};

3
drivers/ide/pci/trm290.c
Просмотреть файл

@ -240,9 +240,6 @@ static int trm290_ide_dma_test_irq (ide_drive_t *drive)
return (status == 0x00ff);
}
/*
* Invoked from ide-dma.c at boot time.
*/
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
unsigned int cfgbase = 0;

2
drivers/ide/ppc/pmac.c
Просмотреть файл

@ -1513,7 +1513,7 @@ pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq)
if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) {
if (pmif->broken_dma_warn == 0) {
printk(KERN_WARNING "%s: DMA on non aligned address,"
printk(KERN_WARNING "%s: DMA on non aligned address, "
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}

22
drivers/scsi/ide-scsi.c
Просмотреть файл

@ -242,16 +242,6 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign
}
}
static void hexdump(u8 *x, int len)
{
int i;
printk("[ ");
for (i = 0; i < len; i++)
printk("%x ", x[i]);
printk("]\n");
}
static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
@ -282,7 +272,8 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
hexdump(pc->c, 6);
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, pc->c,
6, 0);
}
rq->rq_disk = scsi->disk;
return ide_do_drive_cmd(drive, rq, ide_preempt);
@ -337,7 +328,8 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
hexdump(pc->buffer,16);
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
pc->buffer, 16, 0);
}
memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
kfree(pc->buffer);
@ -816,10 +808,12 @@ static int idescsi_queue (struct scsi_cmnd *cmd,
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
hexdump(cmd->cmnd, cmd->cmd_len);
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
cmd->cmnd, cmd->cmd_len, 0);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
hexdump(pc->c, 12);
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1,
pc->c, 12, 0);
}
}