Linux 5.4-rc7

-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl3IqJQeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGOiUH+gOEDwid5OODaFAd
 CggXugdFIlBZefKqGVNW5sjgX8pxFWHXuEMC8iNb6QXtQZdFrI6LFf9hhUDmzQtm
 6y1LPxxEiTZjObMEsBNylb7tyzgujFHcAlp0Zro3w/HLCqmYTSP3FF46i2u6KZfL
 XhkpM4X7R7qxlfpdhlfESv/ElRGocZe6SwXfC7pcPo5flFcmkdu9ijqhNd/6CZ/h
 Nf9rTsD/wEDVUelFbgVN+LJzlaB0tsyc4Zbof07n8OsFZjhdEOop8gfM/kTBLcyY
 6bh66SfDScdsNnC/l8csbPjSZRx+i+nQs67DyhGNnsSAFgHBZdC4Tb/2mDCwhCLR
 dUvuYZc=
 =1N6F
 -----END PGP SIGNATURE-----

Merge v5.4-rc7 into drm-next

We have the i915 security fixes to backmerge, but first
let's clear the decks for other drivers to avoid a bigger
mess.

Signed-off-by: Dave Airlie <airlied@redhat.com>

.mailmap

@@ -108,6 +108,10 @@ Jason Gunthorpe <jgg@ziepe.ca> <jgg@mellanox.com>
 Jason Gunthorpe <jgg@ziepe.ca> <jgunthorpe@obsidianresearch.com>
 Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
 <javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
+Jayachandran C <c.jayachandran@gmail.com> <jayachandranc@netlogicmicro.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@broadcom.com>
+Jayachandran C <c.jayachandran@gmail.com> <jchandra@digeo.com>
+Jayachandran C <c.jayachandran@gmail.com> <jnair@caviumnetworks.com>
 Jean Tourrilhes <jt@hpl.hp.com>
 <jean-philippe@linaro.org> <jean-philippe.brucker@arm.com>
 Jeff Garzik <jgarzik@pretzel.yyz.us>
@@ -196,7 +200,8 @@ Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
-Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
@@ -229,6 +234,7 @@ Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
 Shuah Khan <shuah@kernel.org> <shuahkh@osg.samsung.com>
 Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
+Simon Arlott <simon@octiron.net> <simon@fire.lp0.eu>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>

Documentation/arm64/silicon-errata.rst

@@ -91,6 +91,11 @@ stable kernels.
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
++----------------+-----------------+-----------------+-----------------------------+
+| Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_843419        |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX ITS    | #22375,24313    | CAVIUM_ERRATUM_22375        |
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144        |
@@ -126,7 +131,7 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Falkor v1       | E1009           | QCOM_FALKOR_ERRATUM_1009    |
+| Qualcomm Tech. | Kryo/Falkor v1  | E1009           | QCOM_FALKOR_ERRATUM_1009    |
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | QDF2400 ITS     | E0065           | QCOM_QDF2400_ERRATUM_0065   |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -496,12 +496,12 @@ properties:
 
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
-          - const: tsd,rk3368-uq7-haikou
+          - const: tsd,rk3368-lion-haikou
           - const: rockchip,rk3368
 
       - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
         items:
-          - const: tsd,rk3399-q7-haikou
+          - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
       - description: Tronsmart Orion R68 Meta

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
@@ -27,14 +27,12 @@ properties:
   clocks:
     items:
       - description: The CSI interface clock
-      - description: The CSI module clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
     items:
       - const: bus
-      - const: mod
       - const: isp
       - const: ram
 
@@ -89,9 +87,8 @@ examples:
         compatible = "allwinner,sun7i-a20-csi0";
         reg = <0x01c09000 0x1000>;
         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-                 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
-        clock-names = "bus", "mod", "isp", "ram";
         resets = <&ccu RST_CSI0>;
 
         port {

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -33,13 +33,13 @@ patternProperties:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
+              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
-              GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
+              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
-              I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
+              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
-              I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
+              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
-              LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
+              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
               MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
               NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
               NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
@@ -48,47 +48,45 @@ patternProperties:
               PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
               RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
               SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
+              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
-              SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
-              TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
+              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
-              UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              WDTRST3, WDTRST4, ]
-              WDTRST4, ]
         groups:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
+              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
+              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
-              I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
+              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
-              I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
+              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
-              JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
-              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
+              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
-              MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
-              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
+              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
-              NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
+              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
-              PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
+              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
-              PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
+              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
-              PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
-              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
+              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
+              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
-              SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
+              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
-              SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
+              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
+              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
-              SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
+              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
-              SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
-              SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
-              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
-              TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
-              TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
-              UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
-              UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
+              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
-              WDTRST4, ]
 
 required:
   - compatible

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -30,8 +30,8 @@ if:
 properties:
   compatible:
     enum:
-      - const: regulator-fixed
+      - regulator-fixed
-      - const: regulator-fixed-clock
+      - regulator-fixed-clock
 
   regulator-name: true
 

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -24,15 +24,17 @@ description: |
 
 properties:
   compatible:
-    items:
+    oneOf:
-      - enum:
+      - items:
-          - sifive,rocket0
+          - enum:
-          - sifive,e5
+              - sifive,rocket0
-          - sifive,e51
+              - sifive,e5
-          - sifive,u54-mc
+              - sifive,e51
-          - sifive,u54
+              - sifive,u54-mc
-          - sifive,u5
+              - sifive,u54
-      - const: riscv
+              - sifive,u5
+          - const: riscv
+      - const: riscv    # Simulator only
     description:
       Identifies that the hart uses the RISC-V instruction set
       and identifies the type of the hart.
@@ -66,12 +68,8 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
 
-  timebase-frequency:
+  # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
-    type: integer
+  timebase-frequency: false
-    minimum: 1
-    description:
-      Specifies the clock frequency of the system timer in Hz.
-      This value is common to all harts on a single system image.
 
   interrupt-controller:
     type: object
@@ -93,7 +91,6 @@ properties:
 
 required:
   - riscv,isa
-  - timebase-frequency
   - interrupt-controller
 
 examples:

Documentation/networking/device_drivers/intel/e100.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
+=============================================================
-Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
+Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
-==============================================================
+=============================================================
 
 June 1, 2018
 
@@ -21,7 +21,7 @@ Contents
 In This Release
 ===============
 
-This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
+This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
 Adapters. This driver includes support for Itanium(R)2-based systems.
 
 For questions related to hardware requirements, refer to the documentation
@@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality.
 The latest release of ethtool can be found from
 https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
+Enabling Wake on LAN (WoL)
----------------------------
+--------------------------
-WoL is provided through the ethtool* utility.  For instructions on
+WoL is provided through the ethtool utility.  For instructions on
 enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
 enabled on the system during the next shut down or reboot.  For this
 driver version, in order to enable WoL, the e100 driver must be loaded

Documentation/networking/device_drivers/intel/e1000.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
+==========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
+Linux Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999 - 2013 Intel Corporation.
@@ -438,10 +438,10 @@ ethtool
   The latest release of ethtool can be found from
   https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
+Enabling Wake on LAN (WoL)
----------------------------
+--------------------------
 
-  WoL is configured through the ethtool* utility.
+  WoL is configured through the ethtool utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be

Documentation/networking/device_drivers/intel/e1000e.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-======================================================
+=====================================================
-Linux* Driver for Intel(R) Ethernet Network Connection
+Linux Driver for Intel(R) Ethernet Network Connection
-======================================================
+=====================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 2008-2018 Intel Corporation.
@@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to
 manually set devices for 1 Gbps and higher.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must
@@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters
 operate only in full duplex and only at their native speed.
 
 
-Enabling Wake on LAN* (WoL)
+Enabling Wake on LAN (WoL)
----------------------------
+--------------------------
-WoL is configured through the ethtool* utility.
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the e1000e driver must be loaded

Documentation/networking/device_drivers/intel/fm10k.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
+=============================================================
-Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
+Linux Base Driver for Intel(R) Ethernet Multi-host Controller
-==============================================================
+=============================================================
 
 August 20, 2018
 Copyright(c) 2015-2018 Intel Corporation.
@@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM
----------------------------------------------------------------------------------------
+-------------------------------------------------------------------------------------
 KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
 includes traditional PCIe devices, as well as SR-IOV-capable devices based on
 the Intel Ethernet Controller XL710.

Documentation/networking/device_drivers/intel/i40e.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
+=================================================================
-Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
+Linux Base Driver for the Intel(R) Ethernet Controller 700 Series
-==================================================================
+=================================================================
 
 Intel 40 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
 Network Adapter XXV710 based devices.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must

Documentation/networking/device_drivers/intel/iavf.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
+=================================================================
-Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
+Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function
-==================================================================
+=================================================================
 
 Intel Ethernet Adaptive Virtual Function Linux driver.
 Copyright(c) 2013-2018 Intel Corporation.
@@ -19,7 +19,7 @@ Contents
 Overview
 ========
 
-This file describes the iavf Linux* Base Driver. This driver was formerly
+This file describes the iavf Linux Base Driver. This driver was formerly
 called i40evf.
 
 The iavf driver supports the below mentioned virtual function devices and

Documentation/networking/device_drivers/intel/ice.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===================================================================
+==================================================================
-Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
+Linux Base Driver for the Intel(R) Ethernet Connection E800 Series
-===================================================================
+==================================================================
 
 Intel ice Linux driver.
 Copyright(c) 2018 Intel Corporation.

Documentation/networking/device_drivers/intel/igb.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
+==========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
+Linux Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -129,9 +129,9 @@ version is required for this functionality. Download it at:
 https://www.kernel.org/pub/software/network/ethtool/
 
 
-Enabling Wake on LAN* (WoL)
+Enabling Wake on LAN (WoL)
----------------------------
+--------------------------
-WoL is configured through the ethtool* utility.
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the igb driver must be loaded

Documentation/networking/device_drivers/intel/igbvf.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-============================================================
+===========================================================
-Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
+Linux Base Virtual Function Driver for Intel(R) 1G Ethernet
-============================================================
+===========================================================
 
 Intel Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

Documentation/networking/device_drivers/intel/ixgbe.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================================
+===========================================================================
-Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
+Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
-=============================================================================
+===========================================================================
 
 Intel 10 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS
------------------------------------------------------------------------
+---------------------------------------------------------------------
 Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
 This includes traditional PCIe devices, as well as SR-IOV-capable devices based
 on the Intel Ethernet Controller XL710.

Documentation/networking/device_drivers/intel/ixgbevf.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================
+============================================================
-Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
+Linux Base Virtual Function Driver for Intel(R) 10G Ethernet
-=============================================================
+============================================================
 
 Intel 10 Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

Documentation/networking/device_drivers/pensando/ionic.rst

@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-==========================================================
+========================================================
-Linux* Driver for the Pensando(R) Ethernet adapter family
+Linux Driver for the Pensando(R) Ethernet adapter family
-==========================================================
+========================================================
 
 Pensando Linux Ethernet driver.
 Copyright(c) 2019 Pensando Systems, Inc

Documentation/networking/ip-sysctl.txt

@@ -207,8 +207,8 @@ TCP variables:
 
 somaxconn - INTEGER
 	Limit of socket listen() backlog, known in userspace as SOMAXCONN.
-	Defaults to 128.  See also tcp_max_syn_backlog for additional tuning
+	Defaults to 4096. (Was 128 before linux-5.4)
-	for TCP sockets.
+	See also tcp_max_syn_backlog for additional tuning for TCP sockets.
 
 tcp_abort_on_overflow - BOOLEAN
 	If listening service is too slow to accept new connections,
@@ -408,11 +408,14 @@ tcp_max_orphans - INTEGER
 	up to ~64K of unswappable memory.
 
 tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests, which have not
+	Maximal number of remembered connection requests (SYN_RECV),
-	received an acknowledgment from connecting client.
+	which have not received an acknowledgment from connecting client.
+	This is a per-listener limit.
 	The minimal value is 128 for low memory machines, and it will
 	increase in proportion to the memory of machine.
 	If server suffers from overload, try increasing this number.
+	Remember to also check /proc/sys/net/core/somaxconn
+	A SYN_RECV request socket consumes about 304 bytes of memory.
 
 tcp_max_tw_buckets - INTEGER
 	Maximal number of timewait sockets held by system simultaneously.

Documentation/networking/tls-offload.rst

@@ -436,6 +436,10 @@ by the driver:
    encryption.
  * ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream
    but did not arrive in the expected order.
+ * ``tx_tls_skip_no_sync_data`` - number of TX packets which were part of
+   a TLS stream and arrived out-of-order, but skipped the HW offload routine
+   and went to the regular transmit flow as they were retransmissions of the
+   connection handshake.
  * ``tx_tls_drop_no_sync_data`` - number of TX packets which were part of
    a TLS stream dropped, because they arrived out of order and associated
    record could not be found.

MAINTAINERS

@@ -2326,11 +2326,13 @@ F:	drivers/edac/altera_edac.
 
 ARM/SPREADTRUM SoC SUPPORT
 M:	Orson Zhai <orsonzhai@gmail.com>
-M:	Baolin Wang <baolin.wang@linaro.org>
+M:	Baolin Wang <baolin.wang7@gmail.com>
 M:	Chunyan Zhang <zhang.lyra@gmail.com>
 S:	Maintained
 F:	arch/arm64/boot/dts/sprd
 N:	sprd
+N:	sc27xx
+N:	sc2731
 
 ARM/STI ARCHITECTURE
 M:	Patrice Chotard <patrice.chotard@st.com>
@@ -3054,6 +3056,7 @@ M:	Daniel Borkmann <daniel@iogearbox.net>
 R:	Martin KaFai Lau <kafai@fb.com>
 R:	Song Liu <songliubraving@fb.com>
 R:	Yonghong Song <yhs@fb.com>
+R:	Andrii Nakryiko <andriin@fb.com>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
@@ -3099,7 +3102,7 @@ S:	Supported
 F:	arch/arm64/net/
 
 BPF JIT for MIPS (32-BIT AND 64-BIT)
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Maintained
@@ -3186,7 +3189,7 @@ N:	bcm216*
 N:	kona
 F:	arch/arm/mach-bcm/
 
-BROADCOM BCM2835 ARM ARCHITECTURE
+BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
 M:	Eric Anholt <eric@anholt.net>
 M:	Stefan Wahren <wahrenst@gmx.net>
 L:	bcm-kernel-feedback-list@broadcom.com
@@ -3194,6 +3197,7 @@ L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/anholt/linux
 S:	Maintained
+N:	bcm2711
 N:	bcm2835
 F:	drivers/staging/vc04_services
 
@@ -3240,8 +3244,6 @@ S:	Maintained
 F:	drivers/usb/gadget/udc/bcm63xx_udc.*
 
 BROADCOM BCM7XXX ARM ARCHITECTURE
-M:	Brian Norris <computersforpeace@gmail.com>
-M:	Gregory Fong <gregory.0xf0@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -3739,7 +3741,6 @@ F:	drivers/crypto/cavium/cpt/
 
 CAVIUM THUNDERX2 ARM64 SOC
 M:	Robert Richter <rrichter@cavium.com>
-M:	Jayachandran C <jnair@caviumnetworks.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/cavium/thunder2-99xx*
@@ -8014,7 +8015,7 @@ S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
 IMGTEC ASCII LCD DRIVER
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/auxdisplay/img-ascii-lcd.txt
 F:	drivers/auxdisplay/img-ascii-lcd.c
@@ -10531,8 +10532,12 @@ F:	mm/memblock.c
 F:	Documentation/core-api/boot-time-mm.rst
 
 MEMORY MANAGEMENT
+M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-mm@kvack.org
 W:	http://www.linux-mm.org
+T:	quilt https://ozlabs.org/~akpm/mmotm/
+T:	quilt https://ozlabs.org/~akpm/mmots/
+T:	git git://github.com/hnaz/linux-mm.git
 S:	Maintained
 F:	include/linux/mm.h
 F:	include/linux/gfp.h
@@ -10841,7 +10846,7 @@ F:	drivers/usb/image/microtek.*
 
 MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 M:	James Hogan <jhogan@kernel.org>
 L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
@@ -10855,7 +10860,7 @@ F:	arch/mips/
 F:	drivers/platform/mips/
 
 MIPS BOSTON DEVELOPMENT BOARD
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
@@ -10865,7 +10870,7 @@ F:	drivers/clk/imgtec/clk-boston.c
 F:	include/dt-bindings/clock/boston-clock.h
 
 MIPS GENERIC PLATFORM
-M:	Paul Burton <paul.burton@mips.com>
+M:	Paul Burton <paulburton@kernel.org>
 L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
@@ -11420,7 +11425,6 @@ F:	include/trace/events/tcp.h
 NETWORKING [TLS]
 M:	Boris Pismenny <borisp@mellanox.com>
 M:	Aviad Yehezkel <aviadye@mellanox.com>
-M:	Dave Watson <davejwatson@fb.com>
 M:	John Fastabend <john.fastabend@gmail.com>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 M:	Jakub Kicinski <jakub.kicinski@netronome.com>
@@ -13918,7 +13922,7 @@ F:	drivers/mtd/nand/raw/r852.h
 
 RISC-V ARCHITECTURE
 M:	Paul Walmsley <paul.walmsley@sifive.com>
-M:	Palmer Dabbelt <palmer@sifive.com>
+M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Albert Ou <aou@eecs.berkeley.edu>
 L:	linux-riscv@lists.infradead.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
@@ -14795,7 +14799,7 @@ F:	drivers/media/usb/siano/
 F:	drivers/media/mmc/siano/
 
 SIFIVE DRIVERS
-M:	Palmer Dabbelt <palmer@sifive.com>
+M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 L:	linux-riscv@lists.infradead.org
 T:	git git://github.com/sifive/riscv-linux.git
@@ -14805,7 +14809,7 @@ N:	sifive
 
 SIFIVE FU540 SYSTEM-ON-CHIP
 M:	Paul Walmsley <paul.walmsley@sifive.com>
-M:	Palmer Dabbelt <palmer@sifive.com>
+M:	Palmer Dabbelt <palmer@dabbelt.com>
 L:	linux-riscv@lists.infradead.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pjw/sifive.git
 S:	Supported
@@ -17347,6 +17351,12 @@ F:	include/linux/vbox_utils.h
 F:	include/uapi/linux/vbox*.h
 F:	drivers/virt/vboxguest/
 
+VIRTUAL BOX SHARED FOLDER VFS DRIVER:
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-fsdevel@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/vboxsf/*
+
 VIRTUAL SERIO DEVICE DRIVER
 M:	Stephen Chandler Paul <thatslyude@gmail.com>
 S:	Maintained
@@ -18047,6 +18057,7 @@ F:	Documentation/vm/zsmalloc.rst
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <sjenning@redhat.com>
 M:	Dan Streetman <ddstreet@ieee.org>
+M:	Vitaly Wool <vitaly.wool@konsulko.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -2,8 +2,8 @@
 VERSION = 5
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
-NAME = Nesting Opossum
+NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arc/boot/dts/hsdk.dts

@@ -65,6 +65,14 @@
 		clock-frequency = <33333333>;
 	};
 
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "5v0-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	cpu_intc: cpu-interrupt-controller {
 		compatible = "snps,archs-intc";
 		interrupt-controller;
@@ -264,6 +272,21 @@
 			clocks = <&input_clk>;
 			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
 				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+			spi-flash@0 {
+				compatible = "sst26wf016b", "jedec,spi-nor";
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				spi-max-frequency = <4000000>;
+			};
+
+			adc@1 {
+				compatible = "ti,adc108s102";
+				reg = <1>;
+				vref-supply = <&reg_5v0>;
+				spi-max-frequency = <1000000>;
+			};
 		};
 
 		creg_gpio: gpio@14b0 {

arch/arc/configs/hsdk_defconfig

@@ -32,6 +32,8 @@ CONFIG_INET=y
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -55,6 +57,8 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_SNPS_CREG=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
 CONFIG_DRM_UDL=y
@@ -72,6 +76,8 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_AXI_DMAC=y
+CONFIG_IIO=y
+CONFIG_TI_ADC108S102=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arc/kernel/perf_event.c

@@ -614,8 +614,8 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	/* loop thru all available h/w condition indexes */
 	for (i = 0; i < cc_bcr.c; i++) {
 		write_aux_reg(ARC_REG_CC_INDEX, i);
-		cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
+		cc_name.indiv.word0 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME0));
-		cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);
+		cc_name.indiv.word1 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME1));
 
 		arc_pmu_map_hw_event(i, cc_name.str);
 		arc_pmu_add_raw_event_attr(i, cc_name.str);

arch/arm/boot/dts/am3874-iceboard.dts

@@ -111,13 +111,13 @@
 		reg = <0x70>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		i2c@0 {
 			/* FMC A */
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@1 {
@@ -125,7 +125,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@2 {
@@ -133,7 +132,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@3 {
@@ -141,7 +139,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@4 {
@@ -149,14 +146,12 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-			i2c-mux-idle-disconnect;
 
 			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
 			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
@@ -182,14 +177,12 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
-			i2c-mux-idle-disconnect;
 		};
 
 		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
-			i2c-mux-idle-disconnect;
 
 			u41: pca9575@20 {
 				compatible = "nxp,pca9575";

arch/arm/boot/dts/bcm2835-rpi-zero-w.dts

@@ -113,6 +113,7 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+	bus-width = <4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";

arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi

@@ -9,6 +9,14 @@
 		reg = <0 0x40000000>;
 	};
 
+	leds {
+		/*
+		 * Since there is no upstream GPIO driver yet,
+		 * remove the incomplete node.
+		 */
+		/delete-node/ act;
+	};
+
 	reg_3v3: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3V3";

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi

@@ -328,6 +328,10 @@
 	pinctrl-0 = <&pinctrl_pwm3>;
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6-logicpd-som.dtsi

@@ -207,6 +207,10 @@
 	vin-supply = <&sw1c_reg>;
 };
 
+&snvs_poweroff {
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -230,6 +230,8 @@
 			accelerometer@1c {
 				compatible = "fsl,mma8451";
 				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
 				interrupt-parent = <&gpio6>;
 				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
 			};
@@ -628,6 +630,12 @@
 			>;
 		};
 
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1

arch/arm/boot/dts/imx7s.dtsi

@@ -448,7 +448,7 @@
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT1_ROOT_CLK>,
 					 <&clks IMX7D_GPT1_ROOT_CLK>;
 				clock-names = "ipg", "per";
 			};
@@ -457,7 +457,7 @@
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302e0000 0x10000>;
 				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT2_ROOT_CLK>,
 					 <&clks IMX7D_GPT2_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@@ -467,7 +467,7 @@
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302f0000 0x10000>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT3_ROOT_CLK>,
 					 <&clks IMX7D_GPT3_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";
@@ -477,7 +477,7 @@
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x30300000 0x10000>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
+				clocks = <&clks IMX7D_GPT4_ROOT_CLK>,
 					 <&clks IMX7D_GPT4_ROOT_CLK>;
 				clock-names = "ipg", "per";
 				status = "disabled";

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -192,3 +192,7 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&twl_keypad {
+	status = "disabled";
+};

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -369,7 +369,7 @@
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		/* gpio_100 with gpmc_wait2 pad as wakeirq */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x4e>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <26000000>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -474,7 +474,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		/* gpio_53 with gpmc_ncs3 pad as wakeup */
-		interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>,
+		interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 				      <&omap4_pmx_core 0x3a>;
 		interrupt-names = "irq", "wakeup";
 		ref-clock-frequency = <38400000>;

arch/arm/boot/dts/omap4-sdp.dts

@@ -512,7 +512,7 @@
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};

arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi

@@ -69,7 +69,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -362,7 +362,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };

arch/arm/boot/dts/omap54xx-clocks.dtsi

@@ -1146,7 +1146,7 @@
 		};
 	};
 
-	gpu_cm: clock-controller@1500 {
+	gpu_cm: gpu_cm@1500 {
 		compatible = "ti,omap4-cm";
 		reg = <0x1500 0x100>;
 		#address-cells = <1>;

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

@@ -609,13 +609,13 @@
 						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 
@@ -637,13 +637,13 @@
 						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 

arch/arm/boot/dts/stm32mp157c-ev1.dts

@@ -183,14 +183,12 @@
 
 	ov5640: camera@3c {
 		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ov5640_pins>;
 		reg = <0x3c>;
 		clocks = <&clk_ext_camera>;
 		clock-names = "xclk";
 		DOVDD-supply = <&v2v8>;
-		powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&stmfx_pinctrl 18 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>;
-		reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&stmfx_pinctrl 19 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
 		rotation = <180>;
 		status = "okay";
 
@@ -223,15 +221,8 @@
 
 			joystick_pins: joystick {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
 				bias-pull-down;
 			};
-
-			ov5640_pins: camera {
-				pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
-				drive-push-pull;
-				output-low;
-			};
 		};
 	};
 };

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -932,7 +932,7 @@
 			interrupt-names = "int0", "int1";
 			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
 
@@ -945,7 +945,7 @@
 			interrupt-names = "int0", "int1";
 			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
-			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -380,9 +380,8 @@
 			compatible = "allwinner,sun7i-a20-csi0";
 			reg = <0x01c09000 0x1000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
-			clock-names = "bus", "mod", "isp", "ram";
 			resets = <&ccu RST_CSI0>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts

@@ -192,6 +192,7 @@
 	vqmmc-supply = <&reg_dldo1>;
 	non-removable;
 	wakeup-source;
+	keep-power-in-suspend;
 	status = "okay";
 
 	brcmf: wifi@1 {

arch/arm/boot/dts/vf610-zii-scu4-aib.dts

@@ -602,6 +602,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+		i2c-mux-idle-disconnect;
 
 		sff0_i2c: i2c@1 {
 			#address-cells = <1>;
@@ -640,6 +641,7 @@
 		reg = <0x71>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
 
 		sff5_i2c: i2c@1 {
 			#address-cells = <1>;

arch/arm/configs/davinci_all_defconfig

@@ -167,6 +167,7 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_DA8XX=y
 CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_GPIO=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m

arch/arm/configs/imx_v6_v7_defconfig

@@ -276,6 +276,7 @@ CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
+CONFIG_DRM_MSM=y
 CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_SEIKO_43WVF1G=y

arch/arm/configs/omap2plus_defconfig

@@ -356,15 +356,15 @@ CONFIG_DRM_OMAP_CONNECTOR_HDMI=m
 CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=m
 CONFIG_DRM_OMAP_PANEL_DPI=m
 CONFIG_DRM_OMAP_PANEL_DSI_CM=m
-CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=m
-CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=m
-CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=m
-CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=m
 CONFIG_DRM_TILCDC=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_TI_TFP410=m
+CONFIG_DRM_PANEL_LG_LB035Q02=m
+CONFIG_DRM_PANEL_NEC_NL8048HL11=m
+CONFIG_DRM_PANEL_SHARP_LS037V7DW01=m
+CONFIG_DRM_PANEL_SONY_ACX565AKM=m
+CONFIG_DRM_PANEL_TPO_TD028TTEC1=m
+CONFIG_DRM_PANEL_TPO_TD043MTEA1=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y

arch/arm/include/asm/domain.h

@@ -82,7 +82,7 @@
 #ifndef __ASSEMBLY__
 
 #ifdef CONFIG_CPU_CP15_MMU
-static inline unsigned int get_domain(void)
+static __always_inline unsigned int get_domain(void)
 {
 	unsigned int domain;
 
@@ -94,7 +94,7 @@ static inline unsigned int get_domain(void)
 	return domain;
 }
 
-static inline void set_domain(unsigned val)
+static __always_inline void set_domain(unsigned int val)
 {
 	asm volatile(
 	"mcr	p15, 0, %0, c3, c0	@ set domain"
@@ -102,12 +102,12 @@ static inline void set_domain(unsigned val)
 	isb();
 }
 #else
-static inline unsigned int get_domain(void)
+static __always_inline unsigned int get_domain(void)
 {
 	return 0;
 }
 
-static inline void set_domain(unsigned val)
+static __always_inline void set_domain(unsigned int val)
 {
 }
 #endif

arch/arm/include/asm/uaccess.h

@@ -22,7 +22,7 @@
  * perform such accesses (eg, via list poison values) which could then
  * be exploited for priviledge escalation.
  */
-static inline unsigned int uaccess_save_and_enable(void)
+static __always_inline unsigned int uaccess_save_and_enable(void)
 {
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	unsigned int old_domain = get_domain();
@@ -37,7 +37,7 @@ static inline unsigned int uaccess_save_and_enable(void)
 #endif
 }
 
-static inline void uaccess_restore(unsigned int flags)
+static __always_inline void uaccess_restore(unsigned int flags)
 {
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/* Restore the user access mask */

arch/arm/kernel/head-common.S

@@ -68,7 +68,7 @@ ENDPROC(__vet_atags)
  * The following fragment of code is executed with the MMU on in MMU mode,
  * and uses absolute addresses; this is not position independent.
  *
- *  r0  = cp#15 control register
+ *  r0  = cp#15 control register (exc_ret for M-class)
  *  r1  = machine ID
  *  r2  = atags/dtb pointer
  *  r9  = processor ID
@@ -137,7 +137,8 @@ __mmap_switched_data:
 #ifdef CONFIG_CPU_CP15
 	.long	cr_alignment			@ r3
 #else
-	.long	0				@ r3
+M_CLASS(.long	exc_ret)			@ r3
+AR_CLASS(.long	0)				@ r3
 #endif
 	.size	__mmap_switched_data, . - __mmap_switched_data
 

arch/arm/kernel/head-nommu.S

@@ -201,6 +201,8 @@ M_CLASS(streq	r3, [r12, #PMSAv8_MAIR1])
 	bic	r0, r0, #V7M_SCB_CCR_IC
 #endif
 	str	r0, [r12, V7M_SCB_CCR]
+	/* Pass exc_ret to __mmap_switched */
+	mov	r0, r10
 #endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */
 	ret	lr
 ENDPROC(__after_proc_init)

arch/arm/mach-davinci/dm365.c

@@ -462,8 +462,8 @@ static s8 dm365_queue_priority_mapping[][2] = {
 };
 
 static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
 	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
 	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },

arch/arm/mach-omap2/pdata-quirks.c

@@ -89,6 +89,13 @@ static struct iommu_platform_data omap3_iommu_pdata = {
 	.reset_name = "mmu",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
+};
+
+static struct iommu_platform_data omap3_iommu_isp_pdata = {
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };
 
 static int omap3_sbc_t3730_twl_callback(struct device *dev,
@@ -424,6 +431,8 @@ static struct iommu_platform_data omap4_iommu_pdata = {
 	.reset_name = "mmu_cache",
 	.assert_reset = omap_device_assert_hardreset,
 	.deassert_reset = omap_device_deassert_hardreset,
+	.device_enable = omap_device_enable,
+	.device_idle = omap_device_idle,
 };
 #endif
 
@@ -617,6 +626,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = {
 #ifdef CONFIG_ARCH_OMAP3
 	OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
 		       &omap3_iommu_pdata),
+	OF_DEV_AUXDATA("ti,omap2-iommu", 0x480bd400, "480bd400.mmu",
+		       &omap3_iommu_isp_pdata),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-core", 0x480cb000,
 		       "480cb000.smartreflex", &omap_sr_pdata[OMAP_SR_CORE]),
 	OF_DEV_AUXDATA("ti,omap3-smartreflex-mpu-iva", 0x480c9000,

arch/arm/mach-sunxi/mc_smp.c

@@ -481,14 +481,18 @@ static void sunxi_mc_smp_cpu_die(unsigned int l_cpu)
 static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
 {
 	u32 reg;
+	int gating_bit = cpu;
 
 	pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
 	if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
 		return -EINVAL;
 
+	if (is_a83t && cpu == 0)
+		gating_bit = 4;
+
 	/* gate processor power */
 	reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
-	reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+	reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit);
 	writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
 	udelay(20);
 

arch/arm/mm/alignment.c

@@ -324,7 +324,7 @@ union offset_union {
 	__put32_unaligned_check("strbt", val, addr)
 
 static void
-do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs *regs, union offset_union offset)
+do_alignment_finish_ldst(unsigned long addr, u32 instr, struct pt_regs *regs, union offset_union offset)
 {
 	if (!LDST_U_BIT(instr))
 		offset.un = -offset.un;
@@ -337,7 +337,7 @@ do_alignment_finish_ldst(unsigned long addr, unsigned long instr, struct pt_regs
 }
 
 static int
-do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldrhstrh(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);
 
@@ -386,8 +386,7 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 }
 
 static int
-do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
+do_alignment_ldrdstrd(unsigned long addr, u32 instr, struct pt_regs *regs)
-		      struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);
 	unsigned int rd2;
@@ -449,7 +448,7 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 }
 
 static int
-do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldrstr(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd = RD_BITS(instr);
 
@@ -498,7 +497,7 @@ do_alignment_ldrstr(unsigned long addr, unsigned long instr, struct pt_regs *reg
  * PU = 10             A                    B
  */
 static int
-do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *regs)
+do_alignment_ldmstm(unsigned long addr, u32 instr, struct pt_regs *regs)
 {
 	unsigned int rd, rn, correction, nr_regs, regbits;
 	unsigned long eaddr, newaddr;
@@ -539,7 +538,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	 * processor for us.
 	 */
 	if (addr != eaddr) {
-		pr_err("LDMSTM: PC = %08lx, instr = %08lx, "
+		pr_err("LDMSTM: PC = %08lx, instr = %08x, "
 			"addr = %08lx, eaddr = %08lx\n",
 			 instruction_pointer(regs), instr, addr, eaddr);
 		show_regs(regs);
@@ -716,10 +715,10 @@ thumb2arm(u16 tinstr)
  * 2. Register name Rt from ARMv7 is same as Rd from ARMv6 (Rd is Rt)
  */
 static void *
-do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
+do_alignment_t32_to_handler(u32 *pinstr, struct pt_regs *regs,
 			    union offset_union *poffset)
 {
-	unsigned long instr = *pinstr;
+	u32 instr = *pinstr;
 	u16 tinst1 = (instr >> 16) & 0xffff;
 	u16 tinst2 = instr & 0xffff;
 
@@ -767,17 +766,48 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
 	return NULL;
 }
 
+static int alignment_get_arm(struct pt_regs *regs, u32 *ip, u32 *inst)
+{
+	u32 instr = 0;
+	int fault;
+
+	if (user_mode(regs))
+		fault = get_user(instr, ip);
+	else
+		fault = probe_kernel_address(ip, instr);
+
+	*inst = __mem_to_opcode_arm(instr);
+
+	return fault;
+}
+
+static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
+{
+	u16 instr = 0;
+	int fault;
+
+	if (user_mode(regs))
+		fault = get_user(instr, ip);
+	else
+		fault = probe_kernel_address(ip, instr);
+
+	*inst = __mem_to_opcode_thumb16(instr);
+
+	return fault;
+}
+
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	union offset_union uninitialized_var(offset);
-	unsigned long instr = 0, instrptr;
+	unsigned long instrptr;
-	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
+	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
-	unsigned int fault;
+	u32 instr = 0;
 	u16 tinstr = 0;
 	int isize = 4;
 	int thumb2_32b = 0;
+	int fault;
 
 	if (interrupts_enabled(regs))
 		local_irq_enable();
@@ -786,15 +816,14 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (thumb_mode(regs)) {
 		u16 *ptr = (u16 *)(instrptr & ~1);
-		fault = probe_kernel_address(ptr, tinstr);
+
-		tinstr = __mem_to_opcode_thumb16(tinstr);
+		fault = alignment_get_thumb(regs, ptr, &tinstr);
 		if (!fault) {
 			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
 			    IS_T32(tinstr)) {
 				/* Thumb-2 32-bit */
-				u16 tinst2 = 0;
+				u16 tinst2;
-				fault = probe_kernel_address(ptr + 1, tinst2);
+				fault = alignment_get_thumb(regs, ptr + 1, &tinst2);
-				tinst2 = __mem_to_opcode_thumb16(tinst2);
 				instr = __opcode_thumb32_compose(tinstr, tinst2);
 				thumb2_32b = 1;
 			} else {
@@ -803,8 +832,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 			}
 		}
 	} else {
-		fault = probe_kernel_address((void *)instrptr, instr);
+		fault = alignment_get_arm(regs, (void *)instrptr, &instr);
-		instr = __mem_to_opcode_arm(instr);
 	}
 
 	if (fault) {
@@ -926,7 +954,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	 * Oops, we didn't handle the instruction.
 	 */
 	pr_err("Alignment trap: not handling instruction "
-		"%0*lx at [<%08lx>]\n",
+		"%0*x at [<%08lx>]\n",
 		isize << 1,
 		isize == 2 ? tinstr : instr, instrptr);
 	ai_skipped += 1;
@@ -936,7 +964,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	ai_user += 1;
 
 	if (ai_usermode & UM_WARN)
-		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
+		printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x "
 		       "Address=0x%08lx FSR 0x%03x\n", current->comm,
 			task_pid_nr(current), instrptr,
 			isize << 1,

arch/arm/mm/proc-v7m.S

@@ -132,13 +132,11 @@ __v7m_setup_cont:
 	dsb
 	mov	r6, lr			@ save LR
 	ldr	sp, =init_thread_union + THREAD_START_SP
-	stmia	sp, {r0-r3, r12}
 	cpsie	i
 	svc	#0
 1:	cpsid	i
-	ldr	r0, =exc_ret
+	/* Calculate exc_ret */
-	orr	lr, lr, #EXC_RET_THREADMODE_PROCESSSTACK
+	orr	r10, lr, #EXC_RET_THREADMODE_PROCESSSTACK
-	str	lr, [r0]
 	ldmia	sp, {r0-r3, r12}
 	str	r5, [r12, #11 * 4]	@ restore the original SVC vector entry
 	mov	lr, r6			@ restore LR

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts

@@ -63,3 +63,12 @@
 		reg = <1>;
 	};
 };
+
+&reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts

@@ -159,6 +159,12 @@
 };
 
 &reg_dc1sw {
+	/*
+	 * Ethernet PHY needs 30ms to properly power up and some more
+	 * to initialize. 100ms should be plenty of time to finish
+	 * whole process.
+	 */
+	regulator-enable-ramp-delay = <100000>;
 	regulator-name = "vcc-phy";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -142,15 +142,6 @@
 		clock-output-names = "ext-osc32k";
 	};
 
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	};
-
 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";

arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi

@@ -42,13 +42,14 @@
 
 		pinmux: pinmux@14029c {
 			compatible = "pinctrl-single";
-			reg = <0x0014029c 0x250>;
+			reg = <0x0014029c 0x26c>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
 			pinctrl-single,gpio-range = <
-				&range 0 154 MODE_GPIO
+				&range 0  91 MODE_GPIO
+				&range 95 60 MODE_GPIO
 				>;
 			range: gpio-range {
 				#pinctrl-single,gpio-range-cells = <3>;

arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi

@@ -464,8 +464,7 @@
 					<&pinmux 108 16 27>,
 					<&pinmux 135 77 6>,
 					<&pinmux 141 67 4>,
-					<&pinmux 145 149 6>,
+					<&pinmux 145 149 6>;
-					<&pinmux 151 91 4>;
 		};
 
 		i2c1: i2c@e0000 {

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts

@@ -127,7 +127,7 @@
 	status = "okay";
 
 	i2c-mux@77 {
-		compatible = "nxp,pca9847";
+		compatible = "nxp,pca9547";
 		reg = <0x77>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -33,7 +33,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@1 {
@@ -49,7 +49,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster0_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@100 {
@@ -65,7 +65,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@101 {
@@ -81,7 +81,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster1_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@200 {
@@ -97,7 +97,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@201 {
@@ -113,7 +113,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster2_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@300 {
@@ -129,7 +129,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@301 {
@@ -145,7 +145,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster3_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@400 {
@@ -161,7 +161,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@401 {
@@ -177,7 +177,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster4_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@500 {
@@ -193,7 +193,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@501 {
@@ -209,7 +209,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster5_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@600 {
@@ -225,7 +225,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@601 {
@@ -241,7 +241,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster6_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@700 {
@@ -257,7 +257,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cpu@701 {
@@ -273,7 +273,7 @@
 			i-cache-line-size = <64>;
 			i-cache-sets = <192>;
 			next-level-cache = <&cluster7_l2>;
-			cpu-idle-states = <&cpu_pw20>;
+			cpu-idle-states = <&cpu_pw15>;
 		};
 
 		cluster0_l2: l2-cache0 {
@@ -340,9 +340,9 @@
 			cache-level = <2>;
 		};
 
-		cpu_pw20: cpu-pw20 {
+		cpu_pw15: cpu-pw15 {
 			compatible = "arm,idle-state";
-			idle-state-name = "PW20";
+			idle-state-name = "PW15";
 			arm,psci-suspend-param = <0x0>;
 			entry-latency-us = <2000>;
 			exit-latency-us = <2000>;

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -394,7 +394,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
@@ -405,7 +405,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
@@ -694,7 +694,7 @@
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -710,7 +710,7 @@
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -724,7 +724,7 @@
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MM_CLK_DUMMY>,
+				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
 					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -737,7 +737,7 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -288,7 +288,7 @@
 			};
 
 			sdma3: dma-controller@302b0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302b0000 0x10000>;
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>,
@@ -299,7 +299,7 @@
 			};
 
 			sdma2: dma-controller@302c0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x302c0000 0x10000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>,
@@ -569,7 +569,7 @@
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -585,7 +585,7 @@
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -599,7 +599,7 @@
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_DUMMY>,
+				clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
 					 <&clk IMX8MN_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -612,7 +612,7 @@
 			};
 
 			sdma1: dma-controller@30bd0000 {
-				compatible = "fsl,imx8mn-sdma", "fsl,imx7d-sdma";
+				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi

@@ -88,9 +88,9 @@
 		regulator-name = "0V9_ARM";
 		regulator-min-microvolt = <900000>;
 		regulator-max-microvolt = <1000000>;
-		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-		states = <1000000 0x0
+		states = <1000000 0x1
-		           900000 0x1>;
+		           900000 0x0>;
 		regulator-always-on;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mq.dtsi

@@ -850,7 +850,7 @@
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -867,7 +867,7 @@
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MQ_CLK_DUMMY>,
+				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

@@ -60,11 +60,6 @@
 		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	usb3_phy: usb3-phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&exp_usb3_vbus>;
-	};
-
 	vsdc_reg: vsdc-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vsdc";
@@ -255,10 +250,16 @@
 	status = "okay";
 };
 
+&comphy2 {
+	connector {
+		compatible = "usb-a-connector";
+		phy-supply = <&exp_usb3_vbus>;
+	};
+};
+
 &usb3 {
 	status = "okay";
 	phys = <&comphy2 0>;
-	usb-phy = <&usb3_phy>;
 };
 
 &mdio {

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts

@@ -44,7 +44,7 @@
 		power-supply = <&pp3300_disp>;
 
 		panel-timing {
-			clock-frequency = <266604720>;
+			clock-frequency = <266666667>;
 			hactive = <2400>;
 			hfront-porch = <48>;
 			hback-porch = <84>;

arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts

@@ -644,7 +644,7 @@
 	status = "okay";
 
 	u2phy0_host: host-port {
-		phy-supply = <&vcc5v0_host>;
+		phy-supply = <&vcc5v0_typec>;
 		status = "okay";
 	};
 
@@ -712,7 +712,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts

@@ -173,7 +173,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
+		regulator-max-microvolt = <1700000>;
 		vin-supply = <&vcc5v0_sys>;
 	};
 };
@@ -247,8 +247,8 @@
 	rk808: pmic@1b {
 		compatible = "rockchip,rk808";
 		reg = <0x1b>;
-		interrupt-parent = <&gpio1>;
+		interrupt-parent = <&gpio3>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
@@ -574,7 +574,7 @@
 
 	pmic {
 		pmic_int_l: pmic-int-l {
-			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		vsel1_gpio: vsel1-gpio {
@@ -624,7 +624,6 @@
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -636,8 +635,7 @@
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };

arch/arm64/include/asm/cputype.h

@@ -79,6 +79,7 @@
 #define CAVIUM_CPU_PART_THUNDERX_83XX	0x0A3
 #define CAVIUM_CPU_PART_THUNDERX2	0x0AF
 
+#define BRCM_CPU_PART_BRAHMA_B53	0x100
 #define BRCM_CPU_PART_VULCAN		0x516
 
 #define QCOM_CPU_PART_FALKOR_V1		0x800
@@ -105,6 +106,7 @@
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
 #define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2)
+#define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53)
 #define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN)
 #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
 #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)

arch/arm64/include/asm/pgtable-prot.h

@@ -32,11 +32,11 @@
 #define PROT_DEFAULT		(_PROT_DEFAULT | PTE_MAYBE_NG)
 #define PROT_SECT_DEFAULT	(_PROT_SECT_DEFAULT | PMD_MAYBE_NG)
 
-#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
-#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
-#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
+#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
-#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
+#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
 
 #define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
@@ -80,8 +80,9 @@
 #define PAGE_S2_DEVICE		__pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_S2_XN)
 
 #define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
-#define PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
+/* shared+writable pages are clean by default, hence PTE_RDONLY|PTE_WRITE */
-#define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
+#define PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE)
 #define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN)
 #define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN)
 #define PAGE_EXECONLY		__pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN)

arch/arm64/include/asm/pgtable.h

@@ -283,23 +283,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	set_pte(ptep, pte);
 }
 
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t pte_a, pte_t pte_b)
-{
-	pteval_t lhs, rhs;
-
-	lhs = pte_val(pte_a);
-	rhs = pte_val(pte_b);
-
-	if (pte_present(pte_a))
-		lhs &= ~PTE_RDONLY;
-
-	if (pte_present(pte_b))
-		rhs &= ~PTE_RDONLY;
-
-	return (lhs == rhs);
-}
-
 /*
  * Huge pte definitions.
  */

arch/arm64/include/asm/vdso/vsyscall.h

@@ -30,13 +30,6 @@ int __arm64_get_clock_mode(struct timekeeper *tk)
 }
 #define __arch_get_clock_mode __arm64_get_clock_mode
 
-static __always_inline
-int __arm64_use_vsyscall(struct vdso_data *vdata)
-{
-	return !vdata[CS_HRES_COARSE].clock_mode;
-}
-#define __arch_use_vsyscall __arm64_use_vsyscall
-
 static __always_inline
 void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk)
 {

arch/arm64/kernel/cpu_errata.c

@@ -489,6 +489,7 @@ static const struct midr_range arm64_ssb_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+	MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
 	{},
 };
 
@@ -573,6 +574,7 @@ static const struct midr_range spectre_v2_safe_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+	MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
 	{ /* sentinel */ }
 };
 
@@ -659,17 +661,23 @@ static const struct midr_range arm64_harden_el2_vectors[] = {
 #endif
 
 #ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
-
+static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
-static const struct midr_range arm64_repeat_tlbi_cpus[] = {
 #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
-	MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+	{
+		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0)
+	},
+	{
+		.midr_range.model = MIDR_QCOM_KRYO,
+		.matches = is_kryo_midr,
+	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_1286807
-	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+	{
+		ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+	},
 #endif
 	{},
 };
-
 #endif
 
 #ifdef CONFIG_CAVIUM_ERRATUM_27456
@@ -737,6 +745,33 @@ static const struct midr_range erratum_1418040_list[] = {
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_845719
+static const struct midr_range erratum_845719_list[] = {
+	/* Cortex-A53 r0p[01234] */
+	MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+	/* Brahma-B53 r0p[0] */
+	MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+	{},
+};
+#endif
+
+#ifdef CONFIG_ARM64_ERRATUM_843419
+static const struct arm64_cpu_capabilities erratum_843419_list[] = {
+	{
+		/* Cortex-A53 r0p[01234] */
+		.matches = is_affected_midr_range,
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+		MIDR_FIXED(0x4, BIT(8)),
+	},
+	{
+		/* Brahma-B53 r0p[0] */
+		.matches = is_affected_midr_range,
+		ERRATA_MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+	},
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -768,19 +803,18 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_843419
 	{
-	/* Cortex-A53 r0p[01234] */
 		.desc = "ARM erratum 843419",
 		.capability = ARM64_WORKAROUND_843419,
-		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
-		MIDR_FIXED(0x4, BIT(8)),
+		.matches = cpucap_multi_entry_cap_matches,
+		.match_list = erratum_843419_list,
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_845719
 	{
-	/* Cortex-A53 r0p[01234] */
 		.desc = "ARM erratum 845719",
 		.capability = ARM64_WORKAROUND_845719,
-		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+		ERRATA_MIDR_RANGE_LIST(erratum_845719_list),
 	},
 #endif
 #ifdef CONFIG_CAVIUM_ERRATUM_23154
@@ -816,6 +850,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 	{
 		.desc = "Qualcomm Technologies Falkor/Kryo erratum 1003",
 		.capability = ARM64_WORKAROUND_QCOM_FALKOR_E1003,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = cpucap_multi_entry_cap_matches,
 		.match_list = qcom_erratum_1003_list,
 	},
@@ -824,7 +859,9 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 	{
 		.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
-		ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = cpucap_multi_entry_cap_matches,
+		.match_list = arm64_repeat_tlbi_list,
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_858921

arch/arm64/kvm/sys_regs.c

@@ -632,6 +632,8 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	 */
 	val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
 	       | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
+	if (!system_supports_32bit_el0())
+		val |= ARMV8_PMU_PMCR_LC;
 	__vcpu_sys_reg(vcpu, r->reg) = val;
 }
 
@@ -682,6 +684,8 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		val = __vcpu_sys_reg(vcpu, PMCR_EL0);
 		val &= ~ARMV8_PMU_PMCR_MASK;
 		val |= p->regval & ARMV8_PMU_PMCR_MASK;
+		if (!system_supports_32bit_el0())
+			val |= ARMV8_PMU_PMCR_LC;
 		__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
 		kvm_pmu_handle_pmcr(vcpu, val);
 		kvm_vcpu_pmu_restore_guest(vcpu);

arch/mips/bcm63xx/prom.c

@@ -84,7 +84,7 @@ void __init prom_init(void)
 		 * Here we will start up CPU1 in the background and ask it to
 		 * reconfigure itself then go back to sleep.
 		 */
-		memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
+		memcpy((void *)0xa0000200, bmips_smp_movevec, 0x20);
 		__sync();
 		set_c0_cause(C_SW0);
 		cpumask_set_cpu(1, &bmips_booted_mask);

arch/mips/include/asm/bmips.h

@@ -75,11 +75,11 @@ static inline int register_bmips_smp_ops(void)
 #endif
 }
 
-extern char bmips_reset_nmi_vec;
+extern char bmips_reset_nmi_vec[];
-extern char bmips_reset_nmi_vec_end;
+extern char bmips_reset_nmi_vec_end[];
-extern char bmips_smp_movevec;
+extern char bmips_smp_movevec[];
-extern char bmips_smp_int_vec;
+extern char bmips_smp_int_vec[];
-extern char bmips_smp_int_vec_end;
+extern char bmips_smp_int_vec_end[];
 
 extern int bmips_smp_enabled;
 extern int bmips_cpu_offset;

arch/mips/include/asm/vdso/gettimeofday.h

@@ -24,6 +24,8 @@
 
 #define VDSO_HAS_CLOCK_GETRES		1
 
+#define __VDSO_USE_SYSCALL		ULLONG_MAX
+
 #ifdef CONFIG_MIPS_CLOCK_VSYSCALL
 
 static __always_inline long gettimeofday_fallback(
@@ -205,7 +207,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 		break;
 #endif
 	default:
-		cycle_now = 0;
+		cycle_now = __VDSO_USE_SYSCALL;
 		break;
 	}
 

arch/mips/include/asm/vdso/vsyscall.h

@@ -28,13 +28,6 @@ int __mips_get_clock_mode(struct timekeeper *tk)
 }
 #define __arch_get_clock_mode __mips_get_clock_mode
 
-static __always_inline
-int __mips_use_vsyscall(struct vdso_data *vdata)
-{
-	return (vdata[CS_HRES_COARSE].clock_mode != VDSO_CLOCK_NONE);
-}
-#define __arch_use_vsyscall __mips_use_vsyscall
-
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 

arch/mips/kernel/smp-bmips.c

@@ -464,10 +464,10 @@ static void bmips_wr_vec(unsigned long dst, char *start, char *end)
 
 static inline void bmips_nmi_handler_setup(void)
 {
-	bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec,
+	bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec,
-		&bmips_reset_nmi_vec_end);
+		bmips_reset_nmi_vec_end);
-	bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec,
+	bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec,
-		&bmips_smp_int_vec_end);
+		bmips_smp_int_vec_end);
 }
 
 struct reset_vec_info {

arch/mips/mm/tlbex.c

@@ -653,6 +653,13 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
 				   int restore_scratch)
 {
 	if (restore_scratch) {
+		/*
+		 * Ensure the MFC0 below observes the value written to the
+		 * KScratch register by the prior MTC0.
+		 */
+		if (scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
 			uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16);
@@ -667,12 +674,10 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0) {
+		if (scratch_reg >= 0)
-			uasm_i_ehb(p);
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		} else {
+		else
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -921,6 +926,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	}
 	if (mode != not_refill && check_for_high_segbits) {
 		uasm_l_large_segbits_fault(l, *p);
+
+		if (mode == refill_scratch && scratch_reg >= 0)
+			uasm_i_ehb(p);
+
 		/*
 		 * We get here if we are an xsseg address, or if we are
 		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
@@ -939,12 +948,10 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0) {
+			if (scratch_reg >= 0)
-				uasm_i_ehb(p);
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			} else {
+			else
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
-			}
 		} else {
 			uasm_i_nop(p);
 		}

arch/parisc/kernel/entry.S

@@ -2125,7 +2125,7 @@ ftrace_regs_caller:
 	copy	%rp, %r26
 	LDREG	-FTRACE_FRAME_SIZE-PT_SZ_ALGN(%sp), %r25
 	ldo	-8(%r25), %r25
-	copy	%r3, %arg2
+	ldo	-FTRACE_FRAME_SIZE(%r1), %arg2
 	b,l	ftrace_function_trampoline, %rp
 	copy	%r1, %arg3 /* struct pt_regs */
 

arch/powerpc/include/asm/book3s/32/kup.h

@@ -91,6 +91,7 @@
 
 static inline void kuap_update_sr(u32 sr, u32 addr, u32 end)
 {
+	addr &= 0xf0000000;	/* align addr to start of segment */
 	barrier();	/* make sure thread.kuap is updated before playing with SRs */
 	while (addr < end) {
 		mtsrin(sr, addr);

arch/powerpc/include/asm/elf.h

@@ -175,4 +175,7 @@ do {									\
 	ARCH_DLINFO_CACHE_GEOMETRY;					\
 } while (0)
 
+/* Relocate the kernel image to @final_address */
+void relocate(unsigned long final_address);
+
 #endif /* _ASM_POWERPC_ELF_H */

arch/powerpc/kernel/prom_init.c

@@ -3249,7 +3249,20 @@ static void setup_secure_guest(unsigned long kbase, unsigned long fdt)
 	/* Switch to secure mode. */
 	prom_printf("Switching to secure mode.\n");
 
+	/*
+	 * The ultravisor will do an integrity check of the kernel image but we
+	 * relocated it so the check will fail. Restore the original image by
+	 * relocating it back to the kernel virtual base address.
+	 */
+	if (IS_ENABLED(CONFIG_RELOCATABLE))
+		relocate(KERNELBASE);
+
 	ret = enter_secure_mode(kbase, fdt);
+
+	/* Relocate the kernel again. */
+	if (IS_ENABLED(CONFIG_RELOCATABLE))
+		relocate(kbase);
+
 	if (ret != U_SUCCESS) {
 		prom_printf("Returned %d from switching to secure mode.\n", ret);
 		prom_rtas_os_term("Switch to secure mode failed.\n");

arch/powerpc/kernel/prom_init_check.sh

@@ -26,7 +26,8 @@ _end enter_prom $MEM_FUNCS reloc_offset __secondary_hold
 __secondary_hold_acknowledge __secondary_hold_spinloop __start
 logo_linux_clut224 btext_prepare_BAT
 reloc_got2 kernstart_addr memstart_addr linux_banner _stext
-__prom_init_toc_start __prom_init_toc_end btext_setup_display TOC."
+__prom_init_toc_start __prom_init_toc_end btext_setup_display TOC.
+relocate"
 
 NM="$1"
 OBJ="$2"

arch/powerpc/kvm/book3s_xive.c

@@ -1217,6 +1217,7 @@ int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
 	struct kvmppc_xive *xive = dev->private;
 	struct kvmppc_xive_vcpu *xc;
 	int i, r = -EBUSY;
+	u32 vp_id;
 
 	pr_devel("connect_vcpu(cpu=%d)\n", cpu);
 
@@ -1228,25 +1229,32 @@ int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
 		return -EPERM;
 	if (vcpu->arch.irq_type != KVMPPC_IRQ_DEFAULT)
 		return -EBUSY;
-	if (kvmppc_xive_find_server(vcpu->kvm, cpu)) {
-		pr_devel("Duplicate !\n");
-		return -EEXIST;
-	}
 	if (cpu >= (KVM_MAX_VCPUS * vcpu->kvm->arch.emul_smt_mode)) {
 		pr_devel("Out of bounds !\n");
 		return -EINVAL;
 	}
-	xc = kzalloc(sizeof(*xc), GFP_KERNEL);
-	if (!xc)
-		return -ENOMEM;
 
 	/* We need to synchronize with queue provisioning */
 	mutex_lock(&xive->lock);
+
+	vp_id = kvmppc_xive_vp(xive, cpu);
+	if (kvmppc_xive_vp_in_use(xive->kvm, vp_id)) {
+		pr_devel("Duplicate !\n");
+		r = -EEXIST;
+		goto bail;
+	}
+
+	xc = kzalloc(sizeof(*xc), GFP_KERNEL);
+	if (!xc) {
+		r = -ENOMEM;
+		goto bail;
+	}
+
 	vcpu->arch.xive_vcpu = xc;
 	xc->xive = xive;
 	xc->vcpu = vcpu;
 	xc->server_num = cpu;
-	xc->vp_id = kvmppc_xive_vp(xive, cpu);
+	xc->vp_id = vp_id;
 	xc->mfrr = 0xff;
 	xc->valid = true;
 

arch/powerpc/kvm/book3s_xive.h

@@ -220,6 +220,18 @@ static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server)
 	return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
 }
 
+static inline bool kvmppc_xive_vp_in_use(struct kvm *kvm, u32 vp_id)
+{
+	struct kvm_vcpu *vcpu = NULL;
+	int i;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (vcpu->arch.xive_vcpu && vp_id == vcpu->arch.xive_vcpu->vp_id)
+			return true;
+	}
+	return false;
+}
+
 /*
  * Mapping between guest priorities and host priorities
  * is as follow.

arch/powerpc/kvm/book3s_xive_native.c

@@ -106,6 +106,7 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
 	struct kvmppc_xive *xive = dev->private;
 	struct kvmppc_xive_vcpu *xc = NULL;
 	int rc;
+	u32 vp_id;
 
 	pr_devel("native_connect_vcpu(server=%d)\n", server_num);
 
@@ -124,7 +125,8 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
 
 	mutex_lock(&xive->lock);
 
-	if (kvmppc_xive_find_server(vcpu->kvm, server_num)) {
+	vp_id = kvmppc_xive_vp(xive, server_num);
+	if (kvmppc_xive_vp_in_use(xive->kvm, vp_id)) {
 		pr_devel("Duplicate !\n");
 		rc = -EEXIST;
 		goto bail;
@@ -141,7 +143,7 @@ int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
 	xc->vcpu = vcpu;
 	xc->server_num = server_num;
 
-	xc->vp_id = kvmppc_xive_vp(xive, server_num);
+	xc->vp_id = vp_id;
 	xc->valid = true;
 	vcpu->arch.irq_type = KVMPPC_IRQ_XIVE;
 

arch/powerpc/net/bpf_jit_comp64.c

@@ -1141,6 +1141,19 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		goto out_addrs;
 	}
 
+	/*
+	 * If we have seen a tail call, we need a second pass.
+	 * This is because bpf_jit_emit_common_epilogue() is called
+	 * from bpf_jit_emit_tail_call() with a not yet stable ctx->seen.
+	 */
+	if (cgctx.seen & SEEN_TAILCALL) {
+		cgctx.idx = 0;
+		if (bpf_jit_build_body(fp, 0, &cgctx, addrs, false)) {
+			fp = org_fp;
+			goto out_addrs;
+		}
+	}
+
 	/*
 	 * Pretend to build prologue, given the features we've seen.  This will
 	 * update ctgtx.idx as it pretends to output instructions, then we can

arch/powerpc/platforms/powernv/eeh-powernv.c

@@ -42,7 +42,7 @@ void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct pci_dn *pdn = pci_get_pdn(pdev);
 
-	if (eeh_has_flag(EEH_FORCE_DISABLED))
+	if (!pdn || eeh_has_flag(EEH_FORCE_DISABLED))
 		return;
 
 	dev_dbg(&pdev->dev, "EEH: Setting up device\n");

arch/powerpc/platforms/powernv/smp.c

@@ -146,20 +146,25 @@ static int pnv_smp_cpu_disable(void)
 	return 0;
 }
 
+static void pnv_flush_interrupts(void)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+		if (xive_enabled())
+			xive_flush_interrupt();
+		else
+			icp_opal_flush_interrupt();
+	} else {
+		icp_native_flush_interrupt();
+	}
+}
+
 static void pnv_smp_cpu_kill_self(void)
 {
+	unsigned long srr1, unexpected_mask, wmask;
 	unsigned int cpu;
-	unsigned long srr1, wmask;
 	u64 lpcr_val;
 
 	/* Standard hot unplug procedure */
-	/*
-	 * This hard disables local interurpts, ensuring we have no lazy
-	 * irqs pending.
-	 */
-	WARN_ON(irqs_disabled());
-	hard_irq_disable();
-	WARN_ON(lazy_irq_pending());
 
 	idle_task_exit();
 	current->active_mm = NULL; /* for sanity */
@@ -172,6 +177,27 @@ static void pnv_smp_cpu_kill_self(void)
 	if (cpu_has_feature(CPU_FTR_ARCH_207S))
 		wmask = SRR1_WAKEMASK_P8;
 
+	/*
+	 * This turns the irq soft-disabled state we're called with, into a
+	 * hard-disabled state with pending irq_happened interrupts cleared.
+	 *
+	 * PACA_IRQ_DEC   - Decrementer should be ignored.
+	 * PACA_IRQ_HMI   - Can be ignored, processing is done in real mode.
+	 * PACA_IRQ_DBELL, EE, PMI - Unexpected.
+	 */
+	hard_irq_disable();
+	if (generic_check_cpu_restart(cpu))
+		goto out;
+
+	unexpected_mask = ~(PACA_IRQ_DEC | PACA_IRQ_HMI | PACA_IRQ_HARD_DIS);
+	if (local_paca->irq_happened & unexpected_mask) {
+		if (local_paca->irq_happened & PACA_IRQ_EE)
+			pnv_flush_interrupts();
+		DBG("CPU%d Unexpected exit while offline irq_happened=%lx!\n",
+				cpu, local_paca->irq_happened);
+	}
+	local_paca->irq_happened = PACA_IRQ_HARD_DIS;
+
 	/*
 	 * We don't want to take decrementer interrupts while we are
 	 * offline, so clear LPCR:PECE1. We keep PECE2 (and
@@ -197,6 +223,7 @@ static void pnv_smp_cpu_kill_self(void)
 
 		srr1 = pnv_cpu_offline(cpu);
 
+		WARN_ON_ONCE(!irqs_disabled());
 		WARN_ON(lazy_irq_pending());
 
 		/*
@@ -212,13 +239,7 @@ static void pnv_smp_cpu_kill_self(void)
 		 */
 		if (((srr1 & wmask) == SRR1_WAKEEE) ||
 		    ((srr1 & wmask) == SRR1_WAKEHVI)) {
-			if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+			pnv_flush_interrupts();
-				if (xive_enabled())
-					xive_flush_interrupt();
-				else
-					icp_opal_flush_interrupt();
-			} else
-				icp_native_flush_interrupt();
 		} else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
 			unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
 			asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
@@ -266,7 +287,7 @@ static void pnv_smp_cpu_kill_self(void)
 	 */
 	lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1;
 	pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
-
+out:
 	DBG("CPU%d coming online...\n", cpu);
 }
 

arch/riscv/include/asm/bug.h

@@ -12,7 +12,6 @@
 
 #include <asm/asm.h>
 
-#ifdef CONFIG_GENERIC_BUG
 #define __INSN_LENGTH_MASK  _UL(0x3)
 #define __INSN_LENGTH_32    _UL(0x3)
 #define __COMPRESSED_INSN_MASK	_UL(0xffff)
@@ -20,7 +19,6 @@
 #define __BUG_INSN_32	_UL(0x00100073) /* ebreak */
 #define __BUG_INSN_16	_UL(0x9002) /* c.ebreak */
 
-#ifndef __ASSEMBLY__
 typedef u32 bug_insn_t;
 
 #ifdef CONFIG_GENERIC_BUG_RELATIVE_POINTERS
@@ -43,6 +41,7 @@ typedef u32 bug_insn_t;
 	RISCV_SHORT " %2"
 #endif
 
+#ifdef CONFIG_GENERIC_BUG
 #define __BUG_FLAGS(flags)					\
 do {								\
 	__asm__ __volatile__ (					\
@@ -58,14 +57,10 @@ do {								\
 		  "i" (flags),					\
 		  "i" (sizeof(struct bug_entry)));              \
 } while (0)
-
-#endif /* !__ASSEMBLY__ */
 #else /* CONFIG_GENERIC_BUG */
-#ifndef __ASSEMBLY__
 #define __BUG_FLAGS(flags) do {					\
 	__asm__ __volatile__ ("ebreak\n");			\
 } while (0)
-#endif /* !__ASSEMBLY__ */
 #endif /* CONFIG_GENERIC_BUG */
 
 #define BUG() do {						\
@@ -79,15 +74,10 @@ do {								\
 
 #include <asm-generic/bug.h>
 
-#ifndef __ASSEMBLY__
-
 struct pt_regs;
 struct task_struct;
 
-extern void die(struct pt_regs *regs, const char *str);
+void die(struct pt_regs *regs, const char *str);
-extern void do_trap(struct pt_regs *regs, int signo, int code,
+void do_trap(struct pt_regs *regs, int signo, int code, unsigned long addr);
-	unsigned long addr);
-
-#endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_RISCV_BUG_H */

arch/riscv/include/asm/io.h

@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <asm/mmiowb.h>
+#include <asm/pgtable.h>
 
 extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
 
@@ -161,6 +162,12 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
 #define writeq(v,c)	({ __io_bw(); writeq_cpu((v),(c)); __io_aw(); })
 #endif
 
+/*
+ *  I/O port access constants.
+ */
+#define IO_SPACE_LIMIT		(PCI_IO_SIZE - 1)
+#define PCI_IOBASE		((void __iomem *)PCI_IO_START)
+
 /*
  * Emulation routines for the port-mapped IO space used by some PCI drivers.
  * These are defined as being "fully synchronous", but also "not guaranteed to

arch/riscv/include/asm/irq.h

@@ -7,6 +7,9 @@
 #ifndef _ASM_RISCV_IRQ_H
 #define _ASM_RISCV_IRQ_H
 
+#include <linux/interrupt.h>
+#include <linux/linkage.h>
+
 #define NR_IRQS         0
 
 void riscv_timer_interrupt(void);

arch/riscv/include/asm/pgtable.h

@@ -7,6 +7,7 @@
 #define _ASM_RISCV_PGTABLE_H
 
 #include <linux/mmzone.h>
+#include <linux/sizes.h>
 
 #include <asm/pgtable-bits.h>
 
@@ -86,6 +87,7 @@ extern pgd_t swapper_pg_dir[];
 #define VMALLOC_SIZE     (KERN_VIRT_SIZE >> 1)
 #define VMALLOC_END      (PAGE_OFFSET - 1)
 #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)
+#define PCI_IO_SIZE      SZ_16M
 
 /*
  * Roughly size the vmemmap space to be large enough to fit enough
@@ -100,7 +102,10 @@ extern pgd_t swapper_pg_dir[];
 
 #define vmemmap		((struct page *)VMEMMAP_START)
 
-#define FIXADDR_TOP      (VMEMMAP_START)
+#define PCI_IO_END       VMEMMAP_START
+#define PCI_IO_START     (PCI_IO_END - PCI_IO_SIZE)
+#define FIXADDR_TOP      PCI_IO_START
+
 #ifdef CONFIG_64BIT
 #define FIXADDR_SIZE     PMD_SIZE
 #else
@@ -184,10 +189,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
 	return __pte((pfn << _PAGE_PFN_SHIFT) | pgprot_val(prot));
 }
 
-static inline pte_t mk_pte(struct page *page, pgprot_t prot)
+#define mk_pte(page, prot)       pfn_pte(page_to_pfn(page), prot)
-{
-	return pfn_pte(page_to_pfn(page), prot);
-}
 
 #define pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
@@ -428,9 +430,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-#ifdef CONFIG_FLATMEM
 #define kern_addr_valid(addr)   (1) /* FIXME */
-#endif
 
 extern void *dtb_early_va;
 extern void setup_bootmem(void);