ARM i.MX: Merge i.MX5 support into mach-imx

This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx
and adjusts the Makefile/Kconfig entries in a way that it's possible
to compile i.MX5 together with i.MX3/6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
This commit is contained in:
Sascha Hauer 2011-11-07 12:36:48 +01:00
Родитель 035c17dac4
Коммит 784a90c0a7
37 изменённых файлов: 356 добавлений и 385 удалений

Просмотреть файл

@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik

Просмотреть файл

@ -33,6 +33,18 @@ config ARCH_MX31
config ARCH_MX35
bool
config ARCH_MX5
bool
config ARCH_MX50
bool
config ARCH_MX51
bool
config ARCH_MX53
bool
config SOC_IMX1
bool
select ARCH_MX1
@ -86,6 +98,32 @@ config SOC_IMX35
select MXC_AVIC
select SMP_ON_UP if SMP
config SOC_IMX5
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
select ARCH_MX5
bool
config SOC_IMX50
bool
select SOC_IMX5
select ARCH_MX50
config SOC_IMX51
bool
select SOC_IMX5
select ARCH_MX5
select ARCH_MX51
config SOC_IMX53
bool
select SOC_IMX5
select ARCH_MX5
select ARCH_MX53
if ARCH_IMX_V4_V5
@ -604,6 +642,207 @@ config MACH_VPR200
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
comment "i.MX5 platforms:"
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
peripherals.
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51 platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51
default MACH_EUKREA_MBIMX51_BASEBOARD
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
endchoice
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51SD
default MACH_EUKREA_MBIMXSD51_BASEBOARD
config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MX51_EFIKA_COMMON
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_PATA_IMX
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika MX nettop. This includes specific
configurations for the board and its peripherals.
config MACH_MX51_EFIKASB
bool "Support MX51 Genesi Efika Smartbook"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
comment "i.MX53 machines:"
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
select MACH_MX53_SMD
help
Include support for Freescale i.MX53 based platforms
using the device tree for discovery
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_SMD
bool "Support MX53 SMD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX53 SMD platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_LOCO
bool "Support MX53 LOCO platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
select LEDS_GPIO_REGISTER
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_ARD
bool "Support MX53 ARD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
comment "i.MX6 family:"
config SOC_IMX6Q

Просмотреть файл

@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@ -71,3 +73,22 @@ obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
# i.MX5 based machines
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o

Просмотреть файл

@ -18,6 +18,18 @@ zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000
params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000

Просмотреть файл

@ -23,7 +23,7 @@
#include <mach/common.h>
#include <mach/clock.h>
#include "crm_regs.h"
#include "crm-regs-imx5.h"
/* External clock values passed-in by the board code */
static unsigned long external_high_reference, external_low_reference;

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

Просмотреть файл

@ -1,8 +1,6 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
@ -10,14 +8,22 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/platform_device.h>
#include <linux/suspend.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <linux/err.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
#include "crm_regs.h"
#include <mach/hardware.h>
#include "crm-regs-imx5.h"
/* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx50, mx51, and mx53.*/
static struct clk *gpc_dvfs_clk;
/*
* set cpu low power mode before WFI instruction. This function is called
* mx5 because it can be used for mx50, mx51, and mx53.
*/
void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
@ -83,3 +89,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
}
}
static int mx5_suspend_prepare(void)
{
return clk_enable(gpc_dvfs_clk);
}
static int mx5_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
mx5_cpu_lp_set(STOP_POWER_OFF);
break;
case PM_SUSPEND_STANDBY:
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
break;
default:
return -EINVAL;
}
if (state == PM_SUSPEND_MEM) {
local_flush_tlb_all();
flush_cache_all();
/*clear the EMPGC0/1 bits */
__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
return 0;
}
static void mx5_suspend_finish(void)
{
clk_disable(gpc_dvfs_clk);
}
static int mx5_pm_valid(suspend_state_t state)
{
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
}
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
.prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
.finish = mx5_suspend_finish,
};
static int __init mx5_pm_init(void)
{
if (!cpu_is_mx51() && !cpu_is_mx53())
return 0;
if (gpc_dvfs_clk == NULL)
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (!IS_ERR(gpc_dvfs_clk)) {
if (cpu_is_mx51())
suspend_set_ops(&mx5_suspend_ops);
} else
return -EPERM;
return 0;
}
device_initcall(mx5_pm_init);

Просмотреть файл

@ -1,244 +0,0 @@
if ARCH_MX5
# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
# image. So for most time, SOC_IMX50/51/53 should be used.
config ARCH_MX51
bool
config ARCH_MX50
bool
config ARCH_MX53
bool
config SOC_IMX50
bool
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
select ARCH_MX50
config SOC_IMX51
bool
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
select ARCH_MX51
config SOC_IMX53
bool
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
select ARCH_MX53
#comment "i.MX50 machines:"
config MACH_MX50_RDP
bool "Support MX50 reference design platform"
depends on BROKEN
select SOC_IMX50
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
comment "i.MX51 machines:"
config MACH_IMX51_DT
bool "Support i.MX51 platforms from device tree"
select SOC_IMX51
select USE_OF
select MACH_MX51_BABBAGE
help
Include support for Freescale i.MX51 based platforms
using the device tree for discovery
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
peripherals.
config MACH_MX51_3DS
bool "Support MX51PDK (3DS)"
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_DEBUG_BOARD
help
Include support for MX51PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51 platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51
default MACH_EUKREA_MBIMX51_BASEBOARD
config MACH_EUKREA_MBIMX51_BASEBOARD
prompt "Eukrea MBIMX51 development board"
bool
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
endchoice
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX51SD
default MACH_EUKREA_MBIMXSD51_BASEBOARD
config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MX51_EFIKA_COMMON
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_PATA_IMX
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika MX nettop. This includes specific
configurations for the board and its peripherals.
config MACH_MX51_EFIKASB
bool "Support MX51 Genesi Efika Smartbook"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
comment "i.MX53 machines:"
config MACH_IMX53_DT
bool "Support i.MX53 platforms from device tree"
select SOC_IMX53
select USE_OF
select MACH_MX53_ARD
select MACH_MX53_EVK
select MACH_MX53_LOCO
select MACH_MX53_SMD
help
Include support for Freescale i.MX53 based platforms
using the device tree for discovery
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
Include support for MX53 EVK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_SMD
bool "Support MX53 SMD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
help
Include support for MX53 SMD platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_LOCO
bool "Support MX53 LOCO platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
select LEDS_GPIO_REGISTER
help
Include support for MX53 LOCO platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX53_ARD
bool "Support MX53 ARD platforms"
select SOC_IMX53
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
endif

Просмотреть файл

@ -1,26 +0,0 @@
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o

Просмотреть файл

@ -1,9 +0,0 @@
zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000
params_phys-$(CONFIG_ARCH_MX50) := 0x70000100
initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000
zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000
params_phys-$(CONFIG_ARCH_MX51) := 0x90000100
initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000
zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000
params_phys-$(CONFIG_ARCH_MX53) := 0x70000100
initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000

Просмотреть файл

@ -1,83 +0,0 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/suspend.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include "crm_regs.h"
static struct clk *gpc_dvfs_clk;
static int mx5_suspend_prepare(void)
{
return clk_enable(gpc_dvfs_clk);
}
static int mx5_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
mx5_cpu_lp_set(STOP_POWER_OFF);
break;
case PM_SUSPEND_STANDBY:
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
break;
default:
return -EINVAL;
}
if (state == PM_SUSPEND_MEM) {
local_flush_tlb_all();
flush_cache_all();
/*clear the EMPGC0/1 bits */
__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
return 0;
}
static void mx5_suspend_finish(void)
{
clk_disable(gpc_dvfs_clk);
}
static int mx5_pm_valid(suspend_state_t state)
{
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
}
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
.prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
.finish = mx5_suspend_finish,
};
static int __init mx5_pm_init(void)
{
if (gpc_dvfs_clk == NULL)
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (!IS_ERR(gpc_dvfs_clk)) {
if (cpu_is_mx51())
suspend_set_ops(&mx5_suspend_ops);
} else
return -EPERM;
return 0;
}
device_initcall(mx5_pm_init);

Просмотреть файл

@ -17,25 +17,16 @@ config ARCH_IMX_V4_V5
and ARMv5 SoCs
config ARCH_IMX_V6_V7
bool "i.MX3, i.MX6"
bool "i.MX3, i.MX5, i.MX6"
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for systems based on the Freescale i.MX3 and i.MX6
family.
config ARCH_MX5
bool "i.MX50, i.MX51, i.MX53"
select AUTO_ZRELADDR
select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53
processors.
This enables support for systems based on the Freescale i.MX3, i.MX5
and i.MX6 family.
endchoice
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
endmenu