video: exynos_dp: Move hotplug into a workqueue

Move the hotplug related code from probe and resume into a workqueue.
This allows us to initialize the DP driver (and resume it) when there
is no monitor connected.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
This commit is contained in:
Sean Paul 2012-11-09 13:55:08 +09:00 коммит произвёл Jingoo Han
Родитель 2c95a81032
Коммит 784fa9a10b
2 изменённых файлов: 51 добавлений и 44 удалений

Просмотреть файл

@ -838,6 +838,45 @@ static irqreturn_t exynos_dp_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
static void exynos_dp_hotplug(struct work_struct *work)
{
struct exynos_dp_device *dp;
int ret;
dp = container_of(work, struct exynos_dp_device, hotplug_work);
ret = exynos_dp_detect_hpd(dp);
if (ret) {
dev_err(dp->dev, "unable to detect hpd\n");
return;
}
ret = exynos_dp_handle_edid(dp);
if (ret) {
dev_err(dp->dev, "unable to handle edid\n");
return;
}
ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
dp->video_info->link_rate);
if (ret) {
dev_err(dp->dev, "unable to do link train\n");
return;
}
exynos_dp_enable_scramble(dp, 1);
exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
exynos_dp_enable_enhanced_mode(dp, 1);
exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
exynos_dp_init_video(dp);
ret = exynos_dp_config_video(dp, dp->video_info);
if (ret)
dev_err(dp->dev, "unable to config video\n");
}
#ifdef CONFIG_OF
static struct exynos_dp_platdata *exynos_dp_dt_parse_pdata(struct device *dev)
{
@ -1032,6 +1071,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
return -ENODEV;
}
INIT_WORK(&dp->hotplug_work, exynos_dp_hotplug);
ret = devm_request_irq(&pdev->dev, dp->irq, exynos_dp_irq_handler, 0,
"exynos-dp", dp);
if (ret) {
@ -1051,36 +1092,8 @@ static int __devinit exynos_dp_probe(struct platform_device *pdev)
exynos_dp_init_dp(dp);
ret = exynos_dp_detect_hpd(dp);
if (ret) {
dev_err(&pdev->dev, "unable to detect hpd\n");
return ret;
}
exynos_dp_handle_edid(dp);
ret = exynos_dp_set_link_train(dp, dp->video_info->lane_count,
dp->video_info->link_rate);
if (ret) {
dev_err(&pdev->dev, "unable to do link train\n");
return ret;
}
exynos_dp_enable_scramble(dp, 1);
exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
exynos_dp_enable_enhanced_mode(dp, 1);
exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
exynos_dp_init_video(dp);
ret = exynos_dp_config_video(dp, dp->video_info);
if (ret) {
dev_err(&pdev->dev, "unable to config video\n");
return ret;
}
platform_set_drvdata(pdev, dp);
schedule_work(&dp->hotplug_work);
return 0;
}
@ -1090,6 +1103,9 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
struct exynos_dp_platdata *pdata = pdev->dev.platform_data;
struct exynos_dp_device *dp = platform_get_drvdata(pdev);
if (work_pending(&dp->hotplug_work))
flush_work(&dp->hotplug_work);
if (pdev->dev.of_node) {
if (dp->phy_addr)
exynos_dp_phy_exit(dp);
@ -1100,6 +1116,7 @@ static int __devexit exynos_dp_remove(struct platform_device *pdev)
clk_disable_unprepare(dp->clock);
return 0;
}
@ -1109,6 +1126,9 @@ static int exynos_dp_suspend(struct device *dev)
struct exynos_dp_platdata *pdata = dev->platform_data;
struct exynos_dp_device *dp = dev_get_drvdata(dev);
if (work_pending(&dp->hotplug_work))
flush_work(&dp->hotplug_work);
if (dev->of_node) {
if (dp->phy_addr)
exynos_dp_phy_exit(dp);
@ -1139,21 +1159,7 @@ static int exynos_dp_resume(struct device *dev)
exynos_dp_init_dp(dp);
exynos_dp_detect_hpd(dp);
exynos_dp_handle_edid(dp);
exynos_dp_set_link_train(dp, dp->video_info->lane_count,
dp->video_info->link_rate);
exynos_dp_enable_scramble(dp, 1);
exynos_dp_enable_rx_to_enhanced_mode(dp, 1);
exynos_dp_enable_enhanced_mode(dp, 1);
exynos_dp_set_lane_count(dp, dp->video_info->lane_count);
exynos_dp_set_link_bandwidth(dp, dp->video_info->link_rate);
exynos_dp_init_video(dp);
exynos_dp_config_video(dp, dp->video_info);
schedule_work(&dp->hotplug_work);
return 0;
}

Просмотреть файл

@ -34,6 +34,7 @@ struct exynos_dp_device {
struct video_info *video_info;
struct link_train link_train;
struct work_struct hotplug_work;
};
/* exynos_dp_reg.c */