[ARM] 4963/1: S3C2410 - add basic machine support for the TCT Hammer
Add the TinCanTools Hammer board to list of supported machines in the arch/arm/mach-s3c2410 directory, as well as a default config entry. the mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as the mtd flash layout if enabled in the kernel configuration. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
David Anders
Russell King
Родитель
de56a2f922
Коммит
79b34afa68
|
|
@ -0,0 +1,886 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.25-rc7-hammer
|
||||
# Thu Mar 27 16:39:48 2008
|
||||
#
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
# CONFIG_GENERIC_TIME is not set
|
||||
# CONFIG_GENERIC_CLOCKEVENTS is not set
|
||||
CONFIG_MMU=y
|
||||
CONFIG_NO_IOPORT=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_STACKTRACE_SUPPORT=y
|
||||
CONFIG_LOCKDEP_SUPPORT=y
|
||||
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
|
||||
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
|
||||
CONFIG_GENERIC_HWEIGHT=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_ARCH_SUPPORTS_AOUT=y
|
||||
CONFIG_ZONE_DMA=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
CONFIG_LOCALVERSION=""
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_GROUP_SCHED=y
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
# CONFIG_RT_GROUP_SCHED is not set
|
||||
CONFIG_USER_SCHED=y
|
||||
# CONFIG_CGROUP_SCHED is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
# CONFIG_RELAY is not set
|
||||
# CONFIG_NAMESPACES is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SYSCTL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
# CONFIG_KALLSYMS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
# CONFIG_BUG is not set
|
||||
# CONFIG_ELF_CORE is not set
|
||||
CONFIG_COMPAT_BRK=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_ANON_INODES=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SIGNALFD=y
|
||||
CONFIG_TIMERFD=y
|
||||
CONFIG_EVENTFD=y
|
||||
# CONFIG_SHMEM is not set
|
||||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
# CONFIG_SLAB is not set
|
||||
# CONFIG_SLUB is not set
|
||||
CONFIG_SLOB=y
|
||||
# CONFIG_PROFILING is not set
|
||||
# CONFIG_MARKERS is not set
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_PROC_PAGE_MONITOR=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
CONFIG_TINY_SHMEM=y
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
# CONFIG_KMOD is not set
|
||||
CONFIG_BLOCK=y
|
||||
# CONFIG_LBD is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_LSF is not set
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
CONFIG_CLASSIC_RCU=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_AAEC2000 is not set
|
||||
# CONFIG_ARCH_INTEGRATOR is not set
|
||||
# CONFIG_ARCH_REALVIEW is not set
|
||||
# CONFIG_ARCH_VERSATILE is not set
|
||||
# CONFIG_ARCH_AT91 is not set
|
||||
# CONFIG_ARCH_CLPS7500 is not set
|
||||
# CONFIG_ARCH_CLPS711X is not set
|
||||
# CONFIG_ARCH_CO285 is not set
|
||||
# CONFIG_ARCH_EBSA110 is not set
|
||||
# CONFIG_ARCH_EP93XX is not set
|
||||
# CONFIG_ARCH_FOOTBRIDGE is not set
|
||||
# CONFIG_ARCH_NETX is not set
|
||||
# CONFIG_ARCH_H720X is not set
|
||||
# CONFIG_ARCH_IMX is not set
|
||||
# CONFIG_ARCH_IOP13XX is not set
|
||||
# CONFIG_ARCH_IOP32X is not set
|
||||
# CONFIG_ARCH_IOP33X is not set
|
||||
# CONFIG_ARCH_IXP23XX is not set
|
||||
# CONFIG_ARCH_IXP2000 is not set
|
||||
# CONFIG_ARCH_IXP4XX is not set
|
||||
# CONFIG_ARCH_L7200 is not set
|
||||
# CONFIG_ARCH_KS8695 is not set
|
||||
# CONFIG_ARCH_NS9XXX is not set
|
||||
# CONFIG_ARCH_MXC is not set
|
||||
# CONFIG_ARCH_ORION is not set
|
||||
# CONFIG_ARCH_PNX4008 is not set
|
||||
# CONFIG_ARCH_PXA is not set
|
||||
# CONFIG_ARCH_RPC is not set
|
||||
# CONFIG_ARCH_SA1100 is not set
|
||||
CONFIG_ARCH_S3C2410=y
|
||||
# CONFIG_ARCH_SHARK is not set
|
||||
# CONFIG_ARCH_LH7A40X is not set
|
||||
# CONFIG_ARCH_DAVINCI is not set
|
||||
# CONFIG_ARCH_OMAP is not set
|
||||
# CONFIG_ARCH_MSM7X00A is not set
|
||||
CONFIG_PLAT_S3C24XX=y
|
||||
# CONFIG_S3C2410_DMA is not set
|
||||
CONFIG_PLAT_S3C=y
|
||||
CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
|
||||
CONFIG_CPU_LLSERIAL_S3C2410=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_S3C_BOOT_ERROR_RESET is not set
|
||||
|
||||
#
|
||||
# Power management
|
||||
#
|
||||
CONFIG_S3C_LOWLEVEL_UART_PORT=0
|
||||
|
||||
#
|
||||
# S3C2400 Machines
|
||||
#
|
||||
CONFIG_CPU_S3C2410=y
|
||||
CONFIG_S3C2410_GPIO=y
|
||||
CONFIG_S3C2410_CLOCK=y
|
||||
|
||||
#
|
||||
# S3C2410 Machines
|
||||
#
|
||||
# CONFIG_ARCH_SMDK2410 is not set
|
||||
# CONFIG_ARCH_H1940 is not set
|
||||
# CONFIG_MACH_N30 is not set
|
||||
# CONFIG_ARCH_BAST is not set
|
||||
# CONFIG_MACH_OTOM is not set
|
||||
# CONFIG_MACH_AML_M5900 is not set
|
||||
CONFIG_MACH_TCT_HAMMER=y
|
||||
# CONFIG_MACH_VR1000 is not set
|
||||
# CONFIG_MACH_QT2410 is not set
|
||||
|
||||
#
|
||||
# S3C2412 Machines
|
||||
#
|
||||
# CONFIG_MACH_SMDK2413 is not set
|
||||
# CONFIG_MACH_SMDK2412 is not set
|
||||
# CONFIG_MACH_VSTMS is not set
|
||||
|
||||
#
|
||||
# S3C2440 Machines
|
||||
#
|
||||
# CONFIG_MACH_ANUBIS is not set
|
||||
# CONFIG_MACH_OSIRIS is not set
|
||||
# CONFIG_MACH_RX3715 is not set
|
||||
# CONFIG_ARCH_S3C2440 is not set
|
||||
# CONFIG_MACH_NEXCODER_2440 is not set
|
||||
|
||||
#
|
||||
# S3C2442 Machines
|
||||
#
|
||||
|
||||
#
|
||||
# S3C2443 Machines
|
||||
#
|
||||
# CONFIG_MACH_SMDK2443 is not set
|
||||
|
||||
#
|
||||
# Processor Type
|
||||
#
|
||||
CONFIG_CPU_32=y
|
||||
CONFIG_CPU_ARM920T=y
|
||||
CONFIG_CPU_32v4T=y
|
||||
CONFIG_CPU_ABRT_EV4T=y
|
||||
CONFIG_CPU_CACHE_V4WT=y
|
||||
CONFIG_CPU_CACHE_VIVT=y
|
||||
CONFIG_CPU_COPY_V4WB=y
|
||||
CONFIG_CPU_TLB_V4WBI=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
|
||||
#
|
||||
# Processor Features
|
||||
#
|
||||
CONFIG_ARM_THUMB=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_DISABLE is not set
|
||||
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
|
||||
# CONFIG_OUTER_CACHE is not set
|
||||
|
||||
#
|
||||
# Bus support
|
||||
#
|
||||
# CONFIG_PCI_SYSCALL is not set
|
||||
# CONFIG_ARCH_SUPPORTS_MSI is not set
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# Kernel Features
|
||||
#
|
||||
# CONFIG_TICK_ONESHOT is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
# CONFIG_NO_IDLE_HZ is not set
|
||||
CONFIG_HZ=200
|
||||
# CONFIG_AEABI is not set
|
||||
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4096
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
|
||||
# CONFIG_XIP_KERNEL is not set
|
||||
# CONFIG_KEXEC is not set
|
||||
|
||||
#
|
||||
# Floating point emulation
|
||||
#
|
||||
|
||||
#
|
||||
# At least one emulation must be selected
|
||||
#
|
||||
CONFIG_FPE_NWFPE=y
|
||||
# CONFIG_FPE_NWFPE_XP is not set
|
||||
# CONFIG_FPE_FASTFPE is not set
|
||||
|
||||
#
|
||||
# Userspace binary formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
# CONFIG_BINFMT_AOUT is not set
|
||||
# CONFIG_BINFMT_MISC is not set
|
||||
# CONFIG_ARTHUR is not set
|
||||
|
||||
#
|
||||
# Power management options
|
||||
#
|
||||
# CONFIG_PM is not set
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
CONFIG_PACKET=y
|
||||
# CONFIG_PACKET_MMAP is not set
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
# CONFIG_INET is not set
|
||||
# CONFIG_NETWORK_SECMARK is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
|
||||
#
|
||||
# Wireless
|
||||
#
|
||||
# CONFIG_CFG80211 is not set
|
||||
# CONFIG_WIRELESS_EXT is not set
|
||||
# CONFIG_MAC80211 is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_STANDALONE=y
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
CONFIG_FW_LOADER=y
|
||||
# CONFIG_DEBUG_DRIVER is not set
|
||||
# CONFIG_DEBUG_DEVRES is not set
|
||||
# CONFIG_SYS_HYPERVISOR is not set
|
||||
# CONFIG_CONNECTOR is not set
|
||||
CONFIG_MTD=y
|
||||
# CONFIG_MTD_DEBUG is not set
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
# CONFIG_MTD_AFS_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLKDEVS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
# CONFIG_NFTL is not set
|
||||
# CONFIG_INFTL is not set
|
||||
# CONFIG_RFD_FTL is not set
|
||||
# CONFIG_SSFDC is not set
|
||||
# CONFIG_MTD_OOPS is not set
|
||||
|
||||
#
|
||||
# RAM/ROM/Flash chip drivers
|
||||
#
|
||||
CONFIG_MTD_CFI=y
|
||||
# CONFIG_MTD_JEDECPROBE is not set
|
||||
CONFIG_MTD_GEN_PROBE=y
|
||||
CONFIG_MTD_CFI_ADV_OPTIONS=y
|
||||
CONFIG_MTD_CFI_NOSWAP=y
|
||||
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
|
||||
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
|
||||
CONFIG_MTD_CFI_GEOMETRY=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_1=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_2=y
|
||||
CONFIG_MTD_MAP_BANK_WIDTH_4=y
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
|
||||
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
|
||||
CONFIG_MTD_CFI_I1=y
|
||||
CONFIG_MTD_CFI_I2=y
|
||||
# CONFIG_MTD_CFI_I4 is not set
|
||||
# CONFIG_MTD_CFI_I8 is not set
|
||||
# CONFIG_MTD_OTP is not set
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
# CONFIG_MTD_CFI_AMDSTD is not set
|
||||
# CONFIG_MTD_CFI_STAA is not set
|
||||
CONFIG_MTD_CFI_UTIL=y
|
||||
# CONFIG_MTD_RAM is not set
|
||||
# CONFIG_MTD_ROM is not set
|
||||
# CONFIG_MTD_ABSENT is not set
|
||||
|
||||
#
|
||||
# Mapping drivers for chip access
|
||||
#
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_START=0x00000000
|
||||
CONFIG_MTD_PHYSMAP_LEN=0x0
|
||||
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
|
||||
# CONFIG_MTD_ARM_INTEGRATOR is not set
|
||||
# CONFIG_MTD_PLATRAM is not set
|
||||
|
||||
#
|
||||
# Self-contained MTD device drivers
|
||||
#
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_PHRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLOCK2MTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
# CONFIG_MTD_DOC2001PLUS is not set
|
||||
# CONFIG_MTD_NAND is not set
|
||||
# CONFIG_MTD_ONENAND is not set
|
||||
|
||||
#
|
||||
# UBI - Unsorted block images
|
||||
#
|
||||
# CONFIG_MTD_UBI is not set
|
||||
# CONFIG_PARPORT is not set
|
||||
CONFIG_BLK_DEV=y
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_UB is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=10240
|
||||
# CONFIG_BLK_DEV_XIP is not set
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
# CONFIG_MISC_DEVICES is not set
|
||||
CONFIG_HAVE_IDE=y
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
# CONFIG_SCSI_DMA is not set
|
||||
# CONFIG_SCSI_NETLINK is not set
|
||||
# CONFIG_ATA is not set
|
||||
# CONFIG_MD is not set
|
||||
# CONFIG_NETDEVICES is not set
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
# CONFIG_INPUT_POLLDEV is not set
|
||||
|
||||
#
|
||||
# Userland interfaces
|
||||
#
|
||||
# CONFIG_INPUT_MOUSEDEV is not set
|
||||
# CONFIG_INPUT_JOYDEV is not set
|
||||
# CONFIG_INPUT_EVDEV is not set
|
||||
# CONFIG_INPUT_EVBUG is not set
|
||||
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TABLET is not set
|
||||
# CONFIG_INPUT_TOUCHSCREEN is not set
|
||||
# CONFIG_INPUT_MISC is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
CONFIG_VT=y
|
||||
# CONFIG_VT_CONSOLE is not set
|
||||
CONFIG_HW_CONSOLE=y
|
||||
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
# CONFIG_SERIAL_8250 is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_S3C2410=y
|
||||
CONFIG_SERIAL_S3C2410_CONSOLE=y
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
# CONFIG_NVRAM is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
# CONFIG_W1 is not set
|
||||
# CONFIG_POWER_SUPPLY is not set
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
# CONFIG_SSB is not set
|
||||
|
||||
#
|
||||
# Multifunction device drivers
|
||||
#
|
||||
# CONFIG_MFD_SM501 is not set
|
||||
# CONFIG_MFD_ASIC3 is not set
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
# CONFIG_DAB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_VGASTATE is not set
|
||||
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
|
||||
# CONFIG_FB is not set
|
||||
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Display device support
|
||||
#
|
||||
# CONFIG_DISPLAY_SUPPORT is not set
|
||||
|
||||
#
|
||||
# Console display driver support
|
||||
#
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
# CONFIG_HID_SUPPORT is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEBUG=y
|
||||
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
# CONFIG_USB_DEVICEFS is not set
|
||||
# CONFIG_USB_DEVICE_CLASS is not set
|
||||
# CONFIG_USB_DYNAMIC_MINORS is not set
|
||||
# CONFIG_USB_OTG is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# may also be needed; see USB_STORAGE Help for more information
|
||||
#
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
CONFIG_USB_MON=y
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_EMI62 is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_ADUTUX is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_LEGOTOWER is not set
|
||||
# CONFIG_USB_LCD is not set
|
||||
# CONFIG_USB_BERRY_CHARGE is not set
|
||||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGET is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_FTDI_ELAN is not set
|
||||
# CONFIG_USB_APPLEDISPLAY is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TRANCEVIBRATOR is not set
|
||||
# CONFIG_USB_IOWARRIOR is not set
|
||||
CONFIG_USB_GADGET=y
|
||||
# CONFIG_USB_GADGET_DEBUG is not set
|
||||
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
||||
CONFIG_USB_GADGET_SELECTED=y
|
||||
# CONFIG_USB_GADGET_AMD5536UDC is not set
|
||||
# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
||||
# CONFIG_USB_GADGET_FSL_USB2 is not set
|
||||
# CONFIG_USB_GADGET_NET2280 is not set
|
||||
# CONFIG_USB_GADGET_PXA2XX is not set
|
||||
# CONFIG_USB_GADGET_M66592 is not set
|
||||
# CONFIG_USB_GADGET_GOKU is not set
|
||||
# CONFIG_USB_GADGET_LH7A40X is not set
|
||||
# CONFIG_USB_GADGET_OMAP is not set
|
||||
CONFIG_USB_GADGET_S3C2410=y
|
||||
CONFIG_USB_S3C2410=y
|
||||
# CONFIG_USB_S3C2410_DEBUG is not set
|
||||
# CONFIG_USB_GADGET_AT91 is not set
|
||||
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
||||
# CONFIG_USB_GADGET_DUALSPEED is not set
|
||||
# CONFIG_USB_ZERO is not set
|
||||
CONFIG_USB_ETH=y
|
||||
CONFIG_USB_ETH_RNDIS=y
|
||||
# CONFIG_USB_GADGETFS is not set
|
||||
# CONFIG_USB_FILE_STORAGE is not set
|
||||
# CONFIG_USB_G_SERIAL is not set
|
||||
# CONFIG_USB_MIDI_GADGET is not set
|
||||
# CONFIG_USB_G_PRINTER is not set
|
||||
# CONFIG_MMC is not set
|
||||
# CONFIG_NEW_LEDS is not set
|
||||
CONFIG_RTC_LIB=y
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
CONFIG_EXT2_FS=y
|
||||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_EXT4DEV_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
# CONFIG_INOTIFY is not set
|
||||
# CONFIG_QUOTA is not set
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_FAT_DEFAULT_CODEPAGE=437
|
||||
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
# CONFIG_PROC_SYSCTL is not set
|
||||
CONFIG_SYSFS=y
|
||||
# CONFIG_TMPFS is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_DEBUG=0
|
||||
CONFIG_JFFS2_FS_WRITEBUFFER=y
|
||||
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
|
||||
# CONFIG_JFFS2_SUMMARY is not set
|
||||
# CONFIG_JFFS2_FS_XATTR is not set
|
||||
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JFFS2_LZO is not set
|
||||
CONFIG_JFFS2_RTIME=y
|
||||
# CONFIG_JFFS2_RUBIN is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
# CONFIG_NLS_CODEPAGE_737 is not set
|
||||
# CONFIG_NLS_CODEPAGE_775 is not set
|
||||
# CONFIG_NLS_CODEPAGE_850 is not set
|
||||
# CONFIG_NLS_CODEPAGE_852 is not set
|
||||
# CONFIG_NLS_CODEPAGE_855 is not set
|
||||
# CONFIG_NLS_CODEPAGE_857 is not set
|
||||
# CONFIG_NLS_CODEPAGE_860 is not set
|
||||
# CONFIG_NLS_CODEPAGE_861 is not set
|
||||
# CONFIG_NLS_CODEPAGE_862 is not set
|
||||
# CONFIG_NLS_CODEPAGE_863 is not set
|
||||
# CONFIG_NLS_CODEPAGE_864 is not set
|
||||
# CONFIG_NLS_CODEPAGE_865 is not set
|
||||
# CONFIG_NLS_CODEPAGE_866 is not set
|
||||
# CONFIG_NLS_CODEPAGE_869 is not set
|
||||
# CONFIG_NLS_CODEPAGE_936 is not set
|
||||
# CONFIG_NLS_CODEPAGE_950 is not set
|
||||
# CONFIG_NLS_CODEPAGE_932 is not set
|
||||
# CONFIG_NLS_CODEPAGE_949 is not set
|
||||
# CONFIG_NLS_CODEPAGE_874 is not set
|
||||
# CONFIG_NLS_ISO8859_8 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1250 is not set
|
||||
# CONFIG_NLS_CODEPAGE_1251 is not set
|
||||
# CONFIG_NLS_ASCII is not set
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_NLS_ISO8859_2 is not set
|
||||
# CONFIG_NLS_ISO8859_3 is not set
|
||||
# CONFIG_NLS_ISO8859_4 is not set
|
||||
# CONFIG_NLS_ISO8859_5 is not set
|
||||
# CONFIG_NLS_ISO8859_6 is not set
|
||||
# CONFIG_NLS_ISO8859_7 is not set
|
||||
# CONFIG_NLS_ISO8859_9 is not set
|
||||
# CONFIG_NLS_ISO8859_13 is not set
|
||||
# CONFIG_NLS_ISO8859_14 is not set
|
||||
# CONFIG_NLS_ISO8859_15 is not set
|
||||
# CONFIG_NLS_KOI8_R is not set
|
||||
# CONFIG_NLS_KOI8_U is not set
|
||||
# CONFIG_NLS_UTF8 is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
CONFIG_ENABLE_WARN_DEPRECATED=y
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_SHIRQ is not set
|
||||
# CONFIG_DETECT_SOFTLOCKUP is not set
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
# CONFIG_SCHEDSTATS is not set
|
||||
# CONFIG_TIMER_STATS is not set
|
||||
# CONFIG_DEBUG_RT_MUTEXES is not set
|
||||
# CONFIG_RT_MUTEX_TESTER is not set
|
||||
# CONFIG_DEBUG_SPINLOCK is not set
|
||||
# CONFIG_DEBUG_MUTEXES is not set
|
||||
# CONFIG_DEBUG_LOCK_ALLOC is not set
|
||||
# CONFIG_PROVE_LOCKING is not set
|
||||
# CONFIG_LOCK_STAT is not set
|
||||
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
|
||||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
# CONFIG_DEBUG_SG is not set
|
||||
CONFIG_FRAME_POINTER=y
|
||||
# CONFIG_BOOT_PRINTK_DELAY is not set
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
# CONFIG_BACKTRACE_SELF_TEST is not set
|
||||
# CONFIG_FAULT_INJECTION is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_DEBUG_ICEDCC is not set
|
||||
# CONFIG_DEBUG_S3C_PORT is not set
|
||||
CONFIG_DEBUG_S3C_UART=0
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
# CONFIG_CRC16 is not set
|
||||
# CONFIG_CRC_ITU_T is not set
|
||||
CONFIG_CRC32=y
|
||||
# CONFIG_CRC7 is not set
|
||||
# CONFIG_LIBCRC32C is not set
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_PLIST=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_DMA=y
|
||||
|
|
@ -97,6 +97,13 @@ config BAST_PC104_IRQ
|
|||
Say Y here to enable the PC104 IRQ routing on the
|
||||
Simtec BAST (EB2410ITX)
|
||||
|
||||
config MACH_TCT_HAMMER
|
||||
bool "TCT Hammer Board"
|
||||
select CPU_S3C2410
|
||||
help
|
||||
Say Y here if you are using the TinCanTools Hammer Board
|
||||
<http://www.tincantools.com>
|
||||
|
||||
config MACH_VR1000
|
||||
bool "Thorcom VR1000"
|
||||
select PM_SIMTEC if PM
|
||||
|
|
|
|||
|
|
@ -27,5 +27,6 @@ obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
|
|||
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
|
||||
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
|
||||
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
|
||||
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
|
||||
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
|
||||
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,160 @@
|
|||
/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c
|
||||
*
|
||||
* Copyright (c) 2007 TinCanTools
|
||||
* David Anders <danders@amltd.com>
|
||||
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
* @History:
|
||||
* derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
***********************************************************************/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/list.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/flash.h>
|
||||
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <asm/plat-s3c/regs-serial.h>
|
||||
#include <asm/plat-s3c24xx/devs.h>
|
||||
#include <asm/plat-s3c24xx/cpu.h>
|
||||
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/map.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
|
||||
static struct resource tct_hammer_nor_resource = {
|
||||
.start = 0x00000000,
|
||||
.end = 0x01000000 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct mtd_partition tct_hammer_mtd_partitions[] = {
|
||||
{
|
||||
.name = "System",
|
||||
.size = 0x240000,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
||||
}, {
|
||||
.name = "JFFS2",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
}
|
||||
};
|
||||
|
||||
static struct physmap_flash_data tct_hammer_flash_data = {
|
||||
.width = 2,
|
||||
.parts = tct_hammer_mtd_partitions,
|
||||
.nr_parts = ARRAY_SIZE(tct_hammer_mtd_partitions),
|
||||
};
|
||||
|
||||
static struct platform_device tct_hammer_device_nor = {
|
||||
.name = "physmap-flash",
|
||||
.id = 0,
|
||||
.dev = {
|
||||
.platform_data = &tct_hammer_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &tct_hammer_nor_resource,
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
static struct map_desc tct_hammer_iodesc[] __initdata = {
|
||||
};
|
||||
|
||||
#define UCON S3C2410_UCON_DEFAULT
|
||||
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
|
||||
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
|
||||
|
||||
static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
|
||||
[0] = {
|
||||
.hwport = 0,
|
||||
.flags = 0,
|
||||
.ucon = UCON,
|
||||
.ulcon = ULCON,
|
||||
.ufcon = UFCON,
|
||||
},
|
||||
[1] = {
|
||||
.hwport = 1,
|
||||
.flags = 0,
|
||||
.ucon = UCON,
|
||||
.ulcon = ULCON,
|
||||
.ufcon = UFCON,
|
||||
},
|
||||
[2] = {
|
||||
.hwport = 2,
|
||||
.flags = 0,
|
||||
.ucon = UCON,
|
||||
.ulcon = ULCON,
|
||||
.ufcon = UFCON,
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
static struct platform_device *tct_hammer_devices[] __initdata = {
|
||||
&s3c_device_adc,
|
||||
&s3c_device_wdt,
|
||||
&s3c_device_i2c,
|
||||
&s3c_device_usb,
|
||||
&s3c_device_rtc,
|
||||
&s3c_device_usbgadget,
|
||||
&s3c_device_sdi,
|
||||
#ifdef CONFIG_MTD_PARTITIONS
|
||||
&tct_hammer_device_nor,
|
||||
#endif
|
||||
};
|
||||
|
||||
static void __init tct_hammer_map_io(void)
|
||||
{
|
||||
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
|
||||
s3c24xx_init_clocks(0);
|
||||
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
|
||||
}
|
||||
|
||||
static void __init tct_hammer_init(void)
|
||||
{
|
||||
platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
|
||||
}
|
||||
|
||||
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
|
||||
.phys_io = S3C2410_PA_UART,
|
||||
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
|
||||
.boot_params = S3C2410_SDRAM_PA + 0x100,
|
||||
.map_io = tct_hammer_map_io,
|
||||
.init_irq = s3c24xx_init_irq,
|
||||
.init_machine = tct_hammer_init,
|
||||
.timer = &s3c24xx_timer,
|
||||
MACHINE_END
|
||||
Загрузка…
Ссылка в новой задаче