powerpc/85xx: add Freescale P5040 SOC and SEC v5.2 device trees
Add device tree (dtsi) files for the Freescale P5040 SOC. Since this SOC introduces SEC v5.2, add the dtsi file for that also. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kim Phillips
Kumar Gala
Родитель
708998c9cf
Коммит
7a4da6f70b
|
|
@ -0,0 +1,320 @@
|
|||
/*
|
||||
* P5040 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* This software is provided by Freescale Semiconductor "as is" and any
|
||||
* express or implied warranties, including, but not limited to, the implied
|
||||
* warranties of merchantability and fitness for a particular purpose are
|
||||
* disclaimed. In no event shall Freescale Semiconductor be liable for any
|
||||
* direct, indirect, incidental, special, exemplary, or consequential damages
|
||||
* (including, but not limited to, procurement of substitute goods or services;
|
||||
* loss of use, data, or profits; or business interruption) however caused and
|
||||
* on any theory of liability, whether in contract, strict liability, or tort
|
||||
* (including negligence or otherwise) arising in any way out of the use of this
|
||||
* software, even if advised of the possibility of such damage.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@13000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr2>;
|
||||
reg = <0x13000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@42000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x42000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@43000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x43000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
ddr2: memory-controller@9000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
|
||||
reg = <0x9000 0x1000>;
|
||||
interrupts = <16 2 1 22>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x5000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p5040-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
/include/ "qoriq-sec5.2-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,111 @@
|
|||
/*
|
||||
* P5040 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* This software is provided by Freescale Semiconductor "as is" and any
|
||||
* express or implied warranties, including, but not limited to, the implied
|
||||
* warranties of merchantability and fitness for a particular purpose are
|
||||
* disclaimed. In no event shall Freescale Semiconductor be liable for any
|
||||
* direct, indirect, incidental, special, exemplary, or consequential damages
|
||||
* (including, but not limited to, procurement of substitute goods or services;
|
||||
* loss of use, data, or profits; or business interruption) however caused and
|
||||
* on any theory of liability, whether in contract, strict liability, or tort
|
||||
* (including negligence or otherwise) arising in any way out of the use of this
|
||||
* software, even if advised of the possibility of such damage.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P5040";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e5500@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e5500@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e5500@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e5500@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,118 @@
|
|||
/*
|
||||
* QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ]
|
||||
*
|
||||
* Copyright 2011-2012 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v5.2-job-ring",
|
||||
"fsl,sec-v5.0-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v5.2-rtic",
|
||||
"fsl,sec-v5.0-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v5.2-rtic-memory",
|
||||
"fsl,sec-v5.0-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче