From 7a55b57031b3e97bbdfe8d378e4c6989341de7be Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 19 Jul 2017 17:57:57 +0800 Subject: [PATCH] dt-bindings: PCI: rockchip: Convert to per-lane PHY model Deprecate legacy PHY model and encourage per-lane PHY model. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Reviewed-by: Brian Norris Acked-by: Rob Herring --- .../devicetree/bindings/pci/rockchip-pcie.txt | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index 9b889590c061..5678be82530d 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -19,8 +19,6 @@ Required properties: - "pm" - msi-map: Maps a Requester ID to an MSI controller and associated msi-specifier data. See ./pci-msi.txt -- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. -- phy-names: MUST be "pcie-phy". - interrupts: Three interrupt entries must be specified. - interrupt-names: Must include the following names - "sys" @@ -42,6 +40,18 @@ Required properties: interrupt source. The value must be 1. - interrupt-map-mask and interrupt-map: standard PCI properties +Required properties for legacy PHY model (deprecated): +- phys: From PHY bindings: Phandle for the Generic PHY for PCIe. +- phy-names: MUST be "pcie-phy". + +Required properties for per-lane PHY model (preferred): +- phys: Must contain an phandle to a PHY for each entry in phy-names. +- phy-names: Must include 4 entries for all 4 lanes even if some of + them won't be used for your cases. Entries are of the form "pcie-phy-N": + where N ranges from 0 to 3. + (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt + for changing the #phy-cells of phy node to support it) + Optional Property: - aspm-no-l0s: RC won't support ASPM L0s. This property is needed if using 24MHz OSC for RC's PHY. @@ -96,6 +106,7 @@ pcie0: pcie@f8000000 { <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; reset-names = "core", "mgmt", "mgmt-sticky", "pipe", "pm", "pclk", "aclk"; + /* deprecated legacy PHY model */ phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; @@ -112,3 +123,13 @@ pcie0: pcie@f8000000 { #interrupt-cells = <1>; }; }; + +pcie0: pcie@f8000000 { + ... + + /* preferred per-lane PHY model */ + phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>; + phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3"; + + ... +};