diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e94476beca18..6f56ef025ab5 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -91,6 +91,11 @@ struct atmel_mci_dma { * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO or PDC code. * @pio_offset: Offset into the current scatterlist entry. + * @buffer: Buffer used if we don't have the r/w proof capability. We + * don't have the time to switch pdc buffers so we have to use only + * one buffer for the full transaction. + * @buf_size: size of the buffer. + * @phys_buf_addr: buffer address needed for pdc. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. @@ -166,6 +171,9 @@ struct atmel_mci { struct scatterlist *sg; unsigned int pio_offset; + unsigned int *buffer; + unsigned int buf_size; + dma_addr_t buf_phys_addr; struct atmel_mci_slot *cur_slot; struct mmc_request *mrq; @@ -480,6 +488,11 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } +static inline unsigned int atmci_get_version(struct atmel_mci *host) +{ + return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; +} + static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { @@ -603,6 +616,7 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) { u32 pointer_reg, counter_reg; + unsigned int buf_size; if (dir == XFER_RECEIVE) { pointer_reg = ATMEL_PDC_RPR; @@ -617,8 +631,15 @@ static void atmci_pdc_set_single_buf(struct atmel_mci *host, counter_reg += ATMEL_PDC_SCND_BUF_OFF; } - atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); - if (host->data_size <= sg_dma_len(host->sg)) { + if (!host->caps.has_rwproof) { + buf_size = host->buf_size; + atmci_writel(host, pointer_reg, host->buf_phys_addr); + } else { + buf_size = sg_dma_len(host->sg); + atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); + } + + if (host->data_size <= buf_size) { if (host->data_size & 0x3) { /* If size is different from modulo 4, transfer bytes */ atmci_writel(host, counter_reg, host->data_size); @@ -670,7 +691,15 @@ static void atmci_pdc_cleanup(struct atmel_mci *host) */ static void atmci_pdc_complete(struct atmel_mci *host) { + int transfer_size = host->data->blocks * host->data->blksz; + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_READ)) + sg_copy_from_buffer(host->data->sg, host->data->sg_len, + host->buffer, transfer_size); + atmci_pdc_cleanup(host); /* @@ -818,6 +847,12 @@ atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) /* Configure PDC */ host->data_size = data->blocks * data->blksz; sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); + + if ((!host->caps.has_rwproof) + && (host->data->flags & MMC_DATA_WRITE)) + sg_copy_to_buffer(host->data->sg, host->data->sg_len, + host->buffer, host->data_size); + if (host->data_size) atmci_pdc_set_both_buf(host, ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); @@ -1877,13 +1912,26 @@ static int __init atmci_init_slot(struct atmel_mci *host, mmc->caps |= MMC_CAP_SDIO_IRQ; if (host->caps.has_highspeed) mmc->caps |= MMC_CAP_SD_HIGHSPEED; - if (slot_data->bus_width >= 4) + /* + * Without the read/write proof capability, it is strongly suggested to + * use only one bit for data to prevent fifo underruns and overruns + * which will corrupt data. + */ + if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) mmc->caps |= MMC_CAP_4_BIT_DATA; - mmc->max_segs = 64; - mmc->max_req_size = 32768 * 512; - mmc->max_blk_size = 32768; - mmc->max_blk_count = 512; + if (atmci_get_version(host) < 0x200) { + mmc->max_segs = 256; + mmc->max_blk_size = 4095; + mmc->max_blk_count = 256; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs; + } else { + mmc->max_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + } /* Assume card is present initially */ set_bit(ATMCI_CARD_PRESENT, &slot->flags); @@ -2007,11 +2055,6 @@ static bool atmci_configure_dma(struct atmel_mci *host) } } -static inline unsigned int atmci_get_version(struct atmel_mci *host) -{ - return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; -} - /* * HSMCI (High Speed MCI) module is not fully compatible with MCI module. * HSMCI provides DMA support and a new config register but no more supports @@ -2138,14 +2181,20 @@ static int __init atmci_probe(struct platform_device *pdev) if (pdata->slot[0].bus_width) { ret = atmci_init_slot(host, &pdata->slot[0], 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); - if (!ret) + if (!ret) { nr_slots++; + host->buf_size = host->slot[0]->mmc->max_req_size; + } } if (pdata->slot[1].bus_width) { ret = atmci_init_slot(host, &pdata->slot[1], 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); - if (!ret) + if (!ret) { nr_slots++; + if (host->slot[1]->mmc->max_req_size > host->buf_size) + host->buf_size = + host->slot[1]->mmc->max_req_size; + } } if (!nr_slots) { @@ -2153,6 +2202,17 @@ static int __init atmci_probe(struct platform_device *pdev) goto err_init_slot; } + if (!host->caps.has_rwproof) { + host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size, + &host->buf_phys_addr, + GFP_KERNEL); + if (!host->buffer) { + ret = -ENOMEM; + dev_err(&pdev->dev, "buffer allocation failed\n"); + goto err_init_slot; + } + } + dev_info(&pdev->dev, "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", host->mapbase, irq, nr_slots); @@ -2179,6 +2239,10 @@ static int __exit atmci_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); + if (host->buffer) + dma_free_coherent(&pdev->dev, host->buf_size, + host->buffer, host->buf_phys_addr); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i]) atmci_cleanup_slot(host->slot[i], i);