phy: ti: j721e-wiz: Implement DisplayPort mode to the wiz driver

For DisplayPort use we need to set WIZ_CONFIG_LANECTL register's
P_STANDARD_MODE bits to "mode 3". In the DisplayPort use also the
P_ENABLE bits of the same register are set to P_ENABLE instead of
P_ENABLE_FORCE, so that the DisplayPort driver can enable and disable
the lane as needed. The DisplayPort mode is selected according to
"cdns,phy-type"-properties found in link subnodes under the managed
serdes (see "ti,sierra-phy-t0" and "ti,j721e-serdes-10g" devicetree
bindings for details). All other values of "cdns,phy-type"-property
but PHY_TYPE_DP will set P_STANDARD_MODE bits to 0 and P_ENABLE bits
to force enable.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Jyri Sarha 2020-01-08 10:30:08 +02:00 коммит произвёл Kishon Vijay Abraham I
Родитель 8f3d9f3542
Коммит 7ae14cf581
1 изменённых файлов: 55 добавлений и 4 удалений

Просмотреть файл

@ -20,6 +20,7 @@
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <dt-bindings/phy/phy.h>
#define WIZ_SERDES_CTRL 0x404
#define WIZ_SERDES_TOP_CTRL 0x408
@ -78,6 +79,8 @@ static const struct reg_field p_enable[WIZ_MAX_LANES] = {
REG_FIELD(WIZ_LANECTL(3), 30, 31),
};
enum p_enable { P_ENABLE = 2, P_ENABLE_FORCE = 1, P_ENABLE_DISABLE = 0 };
static const struct reg_field p_align[WIZ_MAX_LANES] = {
REG_FIELD(WIZ_LANECTL(0), 29, 29),
REG_FIELD(WIZ_LANECTL(1), 29, 29),
@ -220,6 +223,7 @@ struct wiz {
struct reset_controller_dev wiz_phy_reset_dev;
struct gpio_desc *gpio_typec_dir;
int typec_dir_delay;
u32 lane_phy_type[WIZ_MAX_LANES];
};
static int wiz_reset(struct wiz *wiz)
@ -242,12 +246,17 @@ static int wiz_reset(struct wiz *wiz)
static int wiz_mode_select(struct wiz *wiz)
{
u32 num_lanes = wiz->num_lanes;
enum wiz_lane_standard_mode mode;
int ret;
int i;
for (i = 0; i < num_lanes; i++) {
ret = regmap_field_write(wiz->p_standard_mode[i],
LANE_MODE_GEN4);
if (wiz->lane_phy_type[i] == PHY_TYPE_DP)
mode = LANE_MODE_GEN1;
else
mode = LANE_MODE_GEN4;
ret = regmap_field_write(wiz->p_standard_mode[i], mode);
if (ret)
return ret;
}
@ -707,7 +716,7 @@ static int wiz_phy_reset_assert(struct reset_controller_dev *rcdev,
return ret;
}
ret = regmap_field_write(wiz->p_enable[id - 1], false);
ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_DISABLE);
return ret;
}
@ -734,7 +743,11 @@ static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
return ret;
}
ret = regmap_field_write(wiz->p_enable[id - 1], true);
if (wiz->lane_phy_type[id - 1] == PHY_TYPE_DP)
ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE);
else
ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_FORCE);
return ret;
}
@ -761,6 +774,40 @@ static const struct of_device_id wiz_id_table[] = {
};
MODULE_DEVICE_TABLE(of, wiz_id_table);
static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
{
struct device_node *serdes, *subnode;
serdes = of_get_child_by_name(dev->of_node, "serdes");
if (!serdes) {
dev_err(dev, "%s: Getting \"serdes\"-node failed\n", __func__);
return -EINVAL;
}
for_each_child_of_node(serdes, subnode) {
u32 reg, num_lanes = 1, phy_type = PHY_NONE;
int ret, i;
ret = of_property_read_u32(subnode, "reg", &reg);
if (ret) {
dev_err(dev,
"%s: Reading \"reg\" from \"%s\" failed: %d\n",
__func__, subnode->name, ret);
return ret;
}
of_property_read_u32(subnode, "cdns,num-lanes", &num_lanes);
of_property_read_u32(subnode, "cdns,phy-type", &phy_type);
dev_dbg(dev, "%s: Lanes %u-%u have phy-type %u\n", __func__,
reg, reg + num_lanes - 1, phy_type);
for (i = reg; i < reg + num_lanes; i++)
wiz->lane_phy_type[i] = phy_type;
}
return 0;
}
static int wiz_probe(struct platform_device *pdev)
{
struct reset_controller_dev *phy_reset_dev;
@ -844,6 +891,10 @@ static int wiz_probe(struct platform_device *pdev)
}
}
ret = wiz_get_lane_phy_types(dev, wiz);
if (ret)
return ret;
wiz->dev = dev;
wiz->regmap = regmap;
wiz->num_lanes = num_lanes;