ASoC: cs42l73: Add Device Tree support for CS42L73
This patch adds support for device tree for the CS42L73 CODEC Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Родитель
f9ca060680
Коммит
7b09eea529
|
@ -0,0 +1,22 @@
|
|||
CS42L73 audio CODEC
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : "cirrus,cs42l73"
|
||||
|
||||
- reg : the I2C address of the device for I2C
|
||||
|
||||
Optional properties:
|
||||
|
||||
- reset_gpio : a GPIO spec for the reset pin.
|
||||
- chgfreq : Charge Pump Frequency values 0x00-0x0F
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
codec: cs42l73@4a {
|
||||
compatible = "cirrus,cs42l73";
|
||||
reg = <0x4a>;
|
||||
reset_gpio = <&gpio 10 0>;
|
||||
chgfreq = <0x05>;
|
||||
};
|
|
@ -17,7 +17,7 @@
|
|||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/regmap.h>
|
||||
|
@ -1416,6 +1416,7 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
|
|||
int ret;
|
||||
unsigned int devid = 0;
|
||||
unsigned int reg;
|
||||
u32 val32;
|
||||
|
||||
cs42l73 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs42l73_private),
|
||||
GFP_KERNEL);
|
||||
|
@ -1431,8 +1432,25 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
|
|||
return ret;
|
||||
}
|
||||
|
||||
if (pdata)
|
||||
if (pdata) {
|
||||
cs42l73->pdata = *pdata;
|
||||
} else {
|
||||
pdata = devm_kzalloc(&i2c_client->dev,
|
||||
sizeof(struct cs42l73_platform_data),
|
||||
GFP_KERNEL);
|
||||
if (!pdata) {
|
||||
dev_err(&i2c_client->dev, "could not allocate pdata\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
if (i2c_client->dev.of_node) {
|
||||
if (of_property_read_u32(i2c_client->dev.of_node,
|
||||
"chgfreq", &val32) >= 0)
|
||||
pdata->chgfreq = val32;
|
||||
}
|
||||
pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node,
|
||||
"reset-gpio", 0);
|
||||
cs42l73->pdata = *pdata;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(i2c_client, cs42l73);
|
||||
|
||||
|
@ -1493,6 +1511,12 @@ static int cs42l73_i2c_remove(struct i2c_client *client)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id cs42l73_of_match[] = {
|
||||
{ .compatible = "cirrus,cs42l73", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, cs42l73_of_match);
|
||||
|
||||
static const struct i2c_device_id cs42l73_id[] = {
|
||||
{"cs42l73", 0},
|
||||
{}
|
||||
|
@ -1504,6 +1528,7 @@ static struct i2c_driver cs42l73_i2c_driver = {
|
|||
.driver = {
|
||||
.name = "cs42l73",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = cs42l73_of_match,
|
||||
},
|
||||
.id_table = cs42l73_id,
|
||||
.probe = cs42l73_i2c_probe,
|
||||
|
|
Загрузка…
Ссылка в новой задаче