OMAP: DSS2: Add DSS2 support for Overo
This patch adds DSS2 support for DVI, S-video, the 480x272 Samsung LTE430WQ-F0C panel, and the 320x240 LG.Philips LB035Q02 panel. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit is contained in:
Steve Sakoman
Tomi Valkeinen
Родитель
7654b4d3f4
Коммит
7b12d7b66b
|
|
@ -28,6 +28,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/i2c/twl.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
|
|
@ -41,10 +42,14 @@
|
|||
|
||||
#include <plat/board.h>
|
||||
#include <plat/common.h>
|
||||
#include <plat/display.h>
|
||||
#include <plat/panel-generic-dpi.h>
|
||||
#include <mach/gpio.h>
|
||||
#include <plat/gpmc.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <plat/nand.h>
|
||||
#include <plat/mcspi.h>
|
||||
#include <plat/mux.h>
|
||||
#include <plat/usb.h>
|
||||
|
||||
#include "mux.h"
|
||||
|
|
@ -68,8 +73,6 @@
|
|||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
|
||||
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
|
||||
#include <plat/mcspi.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/ads7846.h>
|
||||
|
||||
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
|
||||
|
|
@ -94,18 +97,6 @@ static struct ads7846_platform_data ads7846_config = {
|
|||
.keep_vref_on = 1,
|
||||
};
|
||||
|
||||
static struct spi_board_info overo_spi_board_info[] __initdata = {
|
||||
{
|
||||
.modalias = "ads7846",
|
||||
.bus_num = 1,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 1500000,
|
||||
.controller_data = &ads7846_mcspi_config,
|
||||
.irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
|
||||
.platform_data = &ads7846_config,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init overo_ads7846_init(void)
|
||||
{
|
||||
if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
|
||||
|
|
@ -115,9 +106,6 @@ static void __init overo_ads7846_init(void)
|
|||
printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n");
|
||||
return;
|
||||
}
|
||||
|
||||
spi_register_board_info(overo_spi_board_info,
|
||||
ARRAY_SIZE(overo_spi_board_info));
|
||||
}
|
||||
|
||||
#else
|
||||
|
|
@ -233,6 +221,137 @@ static inline void __init overo_init_smsc911x(void)
|
|||
static inline void __init overo_init_smsc911x(void) { return; }
|
||||
#endif
|
||||
|
||||
/* DSS */
|
||||
static int lcd_enabled;
|
||||
static int dvi_enabled;
|
||||
|
||||
#define OVERO_GPIO_LCD_EN 144
|
||||
#define OVERO_GPIO_LCD_BL 145
|
||||
|
||||
static void __init overo_display_init(void)
|
||||
{
|
||||
if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) &&
|
||||
(gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0))
|
||||
gpio_export(OVERO_GPIO_LCD_EN, 0);
|
||||
else
|
||||
printk(KERN_ERR "could not obtain gpio for "
|
||||
"OVERO_GPIO_LCD_EN\n");
|
||||
|
||||
if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) &&
|
||||
(gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0))
|
||||
gpio_export(OVERO_GPIO_LCD_BL, 0);
|
||||
else
|
||||
printk(KERN_ERR "could not obtain gpio for "
|
||||
"OVERO_GPIO_LCD_BL\n");
|
||||
}
|
||||
|
||||
static int overo_panel_enable_dvi(struct omap_dss_device *dssdev)
|
||||
{
|
||||
if (lcd_enabled) {
|
||||
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
dvi_enabled = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
|
||||
{
|
||||
dvi_enabled = 0;
|
||||
}
|
||||
|
||||
static struct panel_generic_dpi_data dvi_panel = {
|
||||
.name = "generic",
|
||||
.platform_enable = overo_panel_enable_dvi,
|
||||
.platform_disable = overo_panel_disable_dvi,
|
||||
};
|
||||
|
||||
static struct omap_dss_device overo_dvi_device = {
|
||||
.name = "dvi",
|
||||
.type = OMAP_DISPLAY_TYPE_DPI,
|
||||
.driver_name = "generic_dpi_panel",
|
||||
.data = &dvi_panel,
|
||||
.phy.dpi.data_lines = 24,
|
||||
};
|
||||
|
||||
static struct omap_dss_device overo_tv_device = {
|
||||
.name = "tv",
|
||||
.driver_name = "venc",
|
||||
.type = OMAP_DISPLAY_TYPE_VENC,
|
||||
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
|
||||
};
|
||||
|
||||
static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
|
||||
{
|
||||
if (dvi_enabled) {
|
||||
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpio_set_value(OVERO_GPIO_LCD_EN, 1);
|
||||
gpio_set_value(OVERO_GPIO_LCD_BL, 1);
|
||||
lcd_enabled = 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
|
||||
{
|
||||
gpio_set_value(OVERO_GPIO_LCD_EN, 0);
|
||||
gpio_set_value(OVERO_GPIO_LCD_BL, 0);
|
||||
lcd_enabled = 0;
|
||||
}
|
||||
|
||||
static struct panel_generic_dpi_data lcd43_panel = {
|
||||
.name = "samsung_lte430wq_f0c",
|
||||
.platform_enable = overo_panel_enable_lcd,
|
||||
.platform_disable = overo_panel_disable_lcd,
|
||||
};
|
||||
|
||||
static struct omap_dss_device overo_lcd43_device = {
|
||||
.name = "lcd43",
|
||||
.type = OMAP_DISPLAY_TYPE_DPI,
|
||||
.driver_name = "generic_dpi_panel",
|
||||
.data = &lcd43_panel,
|
||||
.phy.dpi.data_lines = 24,
|
||||
};
|
||||
|
||||
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
|
||||
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
|
||||
static struct omap_dss_device overo_lcd35_device = {
|
||||
.type = OMAP_DISPLAY_TYPE_DPI,
|
||||
.name = "lcd35",
|
||||
.driver_name = "lgphilips_lb035q02_panel",
|
||||
.phy.dpi.data_lines = 24,
|
||||
.platform_enable = overo_panel_enable_lcd,
|
||||
.platform_disable = overo_panel_disable_lcd,
|
||||
};
|
||||
#endif
|
||||
|
||||
static struct omap_dss_device *overo_dss_devices[] = {
|
||||
&overo_dvi_device,
|
||||
&overo_tv_device,
|
||||
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
|
||||
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
|
||||
&overo_lcd35_device,
|
||||
#endif
|
||||
&overo_lcd43_device,
|
||||
};
|
||||
|
||||
static struct omap_dss_board_info overo_dss_data = {
|
||||
.num_devices = ARRAY_SIZE(overo_dss_devices),
|
||||
.devices = overo_dss_devices,
|
||||
.default_device = &overo_dvi_device,
|
||||
};
|
||||
|
||||
static struct regulator_consumer_supply overo_vdda_dac_supply =
|
||||
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
|
||||
|
||||
static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
|
||||
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
|
||||
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
|
||||
};
|
||||
|
||||
static struct mtd_partition overo_nand_partitions[] = {
|
||||
{
|
||||
.name = "xloader",
|
||||
|
|
@ -358,6 +477,35 @@ static struct regulator_init_data overo_vmmc1 = {
|
|||
.consumer_supplies = &overo_vmmc1_supply,
|
||||
};
|
||||
|
||||
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
|
||||
static struct regulator_init_data overo_vdac = {
|
||||
.constraints = {
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = 1,
|
||||
.consumer_supplies = &overo_vdda_dac_supply,
|
||||
};
|
||||
|
||||
/* VPLL2 for digital video outputs */
|
||||
static struct regulator_init_data overo_vpll2 = {
|
||||
.constraints = {
|
||||
.name = "VDVI",
|
||||
.min_uV = 1800000,
|
||||
.max_uV = 1800000,
|
||||
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
||||
| REGULATOR_MODE_STANDBY,
|
||||
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
||||
| REGULATOR_CHANGE_STATUS,
|
||||
},
|
||||
.num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
|
||||
.consumer_supplies = overo_vdds_dsi_supply,
|
||||
};
|
||||
|
||||
static struct twl4030_codec_audio_data overo_audio_data;
|
||||
|
||||
static struct twl4030_codec_data overo_codec_data = {
|
||||
|
|
@ -365,8 +513,6 @@ static struct twl4030_codec_data overo_codec_data = {
|
|||
.audio = &overo_audio_data,
|
||||
};
|
||||
|
||||
/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
|
||||
|
||||
static struct twl4030_platform_data overo_twldata = {
|
||||
.irq_base = TWL4030_IRQ_BASE,
|
||||
.irq_end = TWL4030_IRQ_END,
|
||||
|
|
@ -374,6 +520,8 @@ static struct twl4030_platform_data overo_twldata = {
|
|||
.usb = &overo_usb_data,
|
||||
.codec = &overo_codec_data,
|
||||
.vmmc1 = &overo_vmmc1,
|
||||
.vdac = &overo_vdac,
|
||||
.vpll2 = &overo_vpll2,
|
||||
};
|
||||
|
||||
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
|
||||
|
|
@ -394,18 +542,38 @@ static int __init overo_i2c_init(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_device overo_lcd_device = {
|
||||
.name = "overo_lcd",
|
||||
.id = -1,
|
||||
static struct spi_board_info overo_spi_board_info[] __initdata = {
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
|
||||
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
{
|
||||
.modalias = "ads7846",
|
||||
.bus_num = 1,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 1500000,
|
||||
.controller_data = &ads7846_mcspi_config,
|
||||
.irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN),
|
||||
.platform_data = &ads7846_config,
|
||||
},
|
||||
#endif
|
||||
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
|
||||
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
|
||||
{
|
||||
.modalias = "lgphilips_lb035q02_panel-spi",
|
||||
.bus_num = 1,
|
||||
.chip_select = 1,
|
||||
.max_speed_hz = 500000,
|
||||
.mode = SPI_MODE_3,
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
static struct omap_lcd_config overo_lcd_config __initdata = {
|
||||
.ctrl_name = "internal",
|
||||
};
|
||||
|
||||
static struct omap_board_config_kernel overo_config[] __initdata = {
|
||||
{ OMAP_TAG_LCD, &overo_lcd_config },
|
||||
};
|
||||
static int __init overo_spi_init(void)
|
||||
{
|
||||
overo_ads7846_init();
|
||||
spi_register_board_info(overo_spi_board_info,
|
||||
ARRAY_SIZE(overo_spi_board_info));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __init overo_init_early(void)
|
||||
{
|
||||
|
|
@ -414,10 +582,6 @@ static void __init overo_init_early(void)
|
|||
mt46h32m32lf6_sdrc_params);
|
||||
}
|
||||
|
||||
static struct platform_device *overo_devices[] __initdata = {
|
||||
&overo_lcd_device,
|
||||
};
|
||||
|
||||
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||||
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
|
||||
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
|
||||
|
|
@ -444,16 +608,15 @@ static struct omap_musb_board_data musb_board_data = {
|
|||
static void __init overo_init(void)
|
||||
{
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap_board_config = overo_config;
|
||||
omap_board_config_size = ARRAY_SIZE(overo_config);
|
||||
overo_i2c_init();
|
||||
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
|
||||
omap_display_init(&overo_dss_data);
|
||||
omap_serial_init();
|
||||
overo_flash_init();
|
||||
usb_musb_init(&musb_board_data);
|
||||
usb_ehci_init(&ehci_pdata);
|
||||
overo_ads7846_init();
|
||||
overo_spi_init();
|
||||
overo_init_smsc911x();
|
||||
overo_display_init();
|
||||
|
||||
/* Ensure SDRC pins are mux'd for self-refresh */
|
||||
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче