dt-bindings: new binding for Ilitek ILI9341 display panels
This adds a new binding for Ilitek ILI9341 display panels. It includes a compatible string for one display (more can be added in the future). The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout board[2] and in Mindsensors' PiStorms[3]. The vendor prefix "adafruit" is used because the actual vendor is not known, but Adafruit is the most common source for a product that contains this panel. [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf [2]: https://www.adafruit.com/product/2478 [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-4-david@lechnology.com
This commit is contained in:
Родитель
bb2a9b6eb1
Коммит
7b59d2d8d7
|
@ -0,0 +1,27 @@
|
|||
Ilitek ILI9341 display panels
|
||||
|
||||
This binding is for display panels using an Ilitek ILI9341 controller in SPI
|
||||
mode.
|
||||
|
||||
Required properties:
|
||||
- compatible: "adafruit,yx240qv29", "ilitek,ili9341"
|
||||
- dc-gpios: D/C pin
|
||||
- reset-gpios: Reset pin
|
||||
|
||||
The node for this driver must be a child node of a SPI controller, hence
|
||||
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
||||
|
||||
Optional properties:
|
||||
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
||||
- backlight: phandle of the backlight device attached to the panel
|
||||
|
||||
Example:
|
||||
display@0{
|
||||
compatible = "adafruit,yx240qv29", "ilitek,ili9341";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <32000000>;
|
||||
dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
rotation = <270>;
|
||||
backlight = <&backlight>;
|
||||
};
|
Загрузка…
Ссылка в новой задаче