diff --git a/Documentation/hwmon/k10temp.rst b/Documentation/hwmon/k10temp.rst
index 8557e26281c3..91b99adc6c48 100644
--- a/Documentation/hwmon/k10temp.rst
+++ b/Documentation/hwmon/k10temp.rst
@@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report
 Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
 as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
 variant.
-
-Various Family 17h and 18h CPUs report voltage and current telemetry
-information. The following attributes may be reported.
-
-Attribute	Label	Description
-===============	=======	================
-in0_input	Vcore	Core voltage
-in1_input	Vsoc	SoC voltage
-curr1_input	Icore	Core current
-curr2_input	Isoc	SoC current
-===============	=======	================
-
-Current values are raw (unscaled) as reported by the CPU. Core current is
-reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A
-/ LSB. The real current is board specific. Reported currents should be seen
-as rough guidance, and should be scaled using sensors3.conf as appropriate
-for a given board.
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 38bc35ac8135..3618a924e78e 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -362,12 +362,6 @@ static const struct hwmon_channel_info *k10temp_info[] = {
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL),
-	HWMON_CHANNEL_INFO(in,
-			   HWMON_I_INPUT | HWMON_I_LABEL,
-			   HWMON_I_INPUT | HWMON_I_LABEL),
-	HWMON_CHANNEL_INFO(curr,
-			   HWMON_C_INPUT | HWMON_C_LABEL,
-			   HWMON_C_INPUT | HWMON_C_LABEL),
 	NULL
 };
 
diff --git a/drivers/hwmon/ltc2947-core.c b/drivers/hwmon/ltc2947-core.c
index bb3f7749a0b0..5423466de697 100644
--- a/drivers/hwmon/ltc2947-core.c
+++ b/drivers/hwmon/ltc2947-core.c
@@ -989,8 +989,12 @@ static int ltc2947_setup(struct ltc2947_data *st)
 		return ret;
 
 	/* check external clock presence */
-	extclk = devm_clk_get(st->dev, NULL);
-	if (!IS_ERR(extclk)) {
+	extclk = devm_clk_get_optional(st->dev, NULL);
+	if (IS_ERR(extclk))
+		return dev_err_probe(st->dev, PTR_ERR(extclk),
+				     "Failed to get external clock\n");
+
+	if (extclk) {
 		unsigned long rate_hz;
 		u8 pre = 0, div, tbctl;
 		u64 aux;
diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c
index 116681fde33d..89fe7b9fe26b 100644
--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -315,8 +315,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 {
 	struct mlxreg_fan *fan = cdev->devdata;
 	unsigned long cur_state;
+	int i, config = 0;
 	u32 regval;
-	int i;
 	int err;
 
 	/*
@@ -329,6 +329,12 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 	 * overwritten.
 	 */
 	if (state >= MLXREG_FAN_SPEED_MIN && state <= MLXREG_FAN_SPEED_MAX) {
+		/*
+		 * This is configuration change, which is only supported through sysfs.
+		 * For configuration non-zero value is to be returned to avoid thermal
+		 * statistics update.
+		 */
+		config = 1;
 		state -= MLXREG_FAN_MAX_STATE;
 		for (i = 0; i < state; i++)
 			fan->cooling_levels[i] = state;
@@ -343,7 +349,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 
 		cur_state = MLXREG_FAN_PWM_DUTY2STATE(regval);
 		if (state < cur_state)
-			return 0;
+			return config;
 
 		state = cur_state;
 	}
@@ -359,7 +365,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
 		dev_err(fan->dev, "Failed to write PWM duty\n");
 		return err;
 	}
-	return 0;
+	return config;
 }
 
 static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = {
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index 0d68a78be980..ae664613289c 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -340,18 +340,11 @@ static ssize_t occ_show_temp_10(struct device *dev,
 		if (val == OCC_TEMP_SENSOR_FAULT)
 			return -EREMOTEIO;
 
-		/*
-		 * VRM doesn't return temperature, only alarm bit. This
-		 * attribute maps to tempX_alarm instead of tempX_input for
-		 * VRM
-		 */
-		if (temp->fru_type != OCC_FRU_TYPE_VRM) {
-			/* sensor not ready */
-			if (val == 0)
-				return -EAGAIN;
+		/* sensor not ready */
+		if (val == 0)
+			return -EAGAIN;
 
-			val *= 1000;
-		}
+		val *= 1000;
 		break;
 	case 2:
 		val = temp->fru_type;
@@ -886,7 +879,7 @@ static int occ_setup_sensor_attrs(struct occ *occ)
 					     0, i);
 		attr++;
 
-		if (sensors->temp.version > 1 &&
+		if (sensors->temp.version == 2 &&
 		    temp->fru_type == OCC_FRU_TYPE_VRM) {
 			snprintf(attr->name, sizeof(attr->name),
 				 "temp%d_alarm", s);
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index df712ce4b164..53f7d1418bc9 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -171,8 +171,14 @@ static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf,
 		cmd = CFFPS_SN_CMD;
 		break;
 	case CFFPS_DEBUGFS_MAX_POWER_OUT:
-		rc = i2c_smbus_read_word_swapped(psu->client,
-						 CFFPS_MAX_POWER_OUT_CMD);
+		if (psu->version == cffps1) {
+			rc = i2c_smbus_read_word_swapped(psu->client,
+					CFFPS_MAX_POWER_OUT_CMD);
+		} else {
+			rc = i2c_smbus_read_word_data(psu->client,
+					CFFPS_MAX_POWER_OUT_CMD);
+		}
+
 		if (rc < 0)
 			return rc;
 
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
index eb94bd5f4e2a..51986adfbf47 100644
--- a/drivers/hwmon/pmbus/mp2975.c
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -54,7 +54,7 @@
 
 #define MP2975_RAIL2_FUNC	(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
 				 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
-				 PMBUS_PHASE_VIRTUAL)
+				 PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL)
 
 struct mp2975_data {
 	struct pmbus_driver_info info;
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index ede66ea6a730..b963a369c5ab 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -100,71 +100,81 @@ struct tmp421_data {
 	s16 temp[4];
 };
 
-static int temp_from_s16(s16 reg)
+static int temp_from_raw(u16 reg, bool extended)
 {
 	/* Mask out status bits */
 	int temp = reg & ~0xf;
 
-	return (temp * 1000 + 128) / 256;
+	if (extended)
+		temp = temp - 64 * 256;
+	else
+		temp = (s16)temp;
+
+	return DIV_ROUND_CLOSEST(temp * 1000, 256);
 }
 
-static int temp_from_u16(u16 reg)
+static int tmp421_update_device(struct tmp421_data *data)
 {
-	/* Mask out status bits */
-	int temp = reg & ~0xf;
-
-	/* Add offset for extended temperature range. */
-	temp -= 64 * 256;
-
-	return (temp * 1000 + 128) / 256;
-}
-
-static struct tmp421_data *tmp421_update_device(struct device *dev)
-{
-	struct tmp421_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
+	int ret = 0;
 	int i;
 
 	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + (HZ / 2)) ||
 	    !data->valid) {
-		data->config = i2c_smbus_read_byte_data(client,
-			TMP421_CONFIG_REG_1);
+		ret = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
+		if (ret < 0)
+			goto exit;
+		data->config = ret;
 
 		for (i = 0; i < data->channels; i++) {
-			data->temp[i] = i2c_smbus_read_byte_data(client,
-				TMP421_TEMP_MSB[i]) << 8;
-			data->temp[i] |= i2c_smbus_read_byte_data(client,
-				TMP421_TEMP_LSB[i]);
+			ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_MSB[i]);
+			if (ret < 0)
+				goto exit;
+			data->temp[i] = ret << 8;
+
+			ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_LSB[i]);
+			if (ret < 0)
+				goto exit;
+			data->temp[i] |= ret;
 		}
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}
 
+exit:
 	mutex_unlock(&data->update_lock);
 
-	return data;
+	if (ret < 0) {
+		data->valid = 0;
+		return ret;
+	}
+
+	return 0;
 }
 
 static int tmp421_read(struct device *dev, enum hwmon_sensor_types type,
 		       u32 attr, int channel, long *val)
 {
-	struct tmp421_data *tmp421 = tmp421_update_device(dev);
+	struct tmp421_data *tmp421 = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = tmp421_update_device(tmp421);
+	if (ret)
+		return ret;
 
 	switch (attr) {
 	case hwmon_temp_input:
-		if (tmp421->config & TMP421_CONFIG_RANGE)
-			*val = temp_from_u16(tmp421->temp[channel]);
-		else
-			*val = temp_from_s16(tmp421->temp[channel]);
+		*val = temp_from_raw(tmp421->temp[channel],
+				     tmp421->config & TMP421_CONFIG_RANGE);
 		return 0;
 	case hwmon_temp_fault:
 		/*
-		 * The OPEN bit signals a fault. This is bit 0 of the temperature
-		 * register (low byte).
+		 * Any of OPEN or /PVLD bits indicate a hardware mulfunction
+		 * and the conversion result may be incorrect
 		 */
-		*val = tmp421->temp[channel] & 0x01;
+		*val = !!(tmp421->temp[channel] & 0x03);
 		return 0;
 	default:
 		return -EOPNOTSUPP;
@@ -177,9 +187,6 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type,
 {
 	switch (attr) {
 	case hwmon_temp_fault:
-		if (channel == 0)
-			return 0;
-		return 0444;
 	case hwmon_temp_input:
 		return 0444;
 	default:
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 37b25a1474c4..3c1be2c11fdf 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -273,9 +273,6 @@ struct w83791d_data {
 	char valid;			/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
-	/* array of 2 pointers to subclients */
-	struct i2c_client *lm75[2];
-
 	/* volts */
 	u8 in[NUMBER_OF_VIN];		/* Register value */
 	u8 in_max[NUMBER_OF_VIN];	/* Register value */
@@ -1257,7 +1254,6 @@ static const struct attribute_group w83791d_group_fanpwm45 = {
 static int w83791d_detect_subclients(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
-	struct w83791d_data *data = i2c_get_clientdata(client);
 	int address = client->addr;
 	int i, id;
 	u8 val;
@@ -1280,22 +1276,19 @@ static int w83791d_detect_subclients(struct i2c_client *client)
 	}
 
 	val = w83791d_read(client, W83791D_REG_I2C_SUBADDR);
-	if (!(val & 0x08))
-		data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter,
-							  0x48 + (val & 0x7));
-	if (!(val & 0x80)) {
-		if (!IS_ERR(data->lm75[0]) &&
-				((val & 0x7) == ((val >> 4) & 0x7))) {
-			dev_err(&client->dev,
-				"duplicate addresses 0x%x, "
-				"use force_subclient\n",
-				data->lm75[0]->addr);
-			return -ENODEV;
-		}
-		data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter,
-							  0x48 + ((val >> 4) & 0x7));
+
+	if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) {
+		dev_err(&client->dev,
+			"duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7));
+		return -ENODEV;
 	}
 
+	if (!(val & 0x08))
+		devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (val & 0x7));
+
+	if (!(val & 0x80))
+		devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((val >> 4) & 0x7));
+
 	return 0;
 }
 
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index abd5c3a722b9..1f175f381350 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -264,9 +264,6 @@ struct w83792d_data {
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
-	/* array of 2 pointers to subclients */
-	struct i2c_client *lm75[2];
-
 	u8 in[9];		/* Register value */
 	u8 in_max[9];		/* Register value */
 	u8 in_min[9];		/* Register value */
@@ -927,7 +924,6 @@ w83792d_detect_subclients(struct i2c_client *new_client)
 	int address = new_client->addr;
 	u8 val;
 	struct i2c_adapter *adapter = new_client->adapter;
-	struct w83792d_data *data = i2c_get_clientdata(new_client);
 
 	id = i2c_adapter_id(adapter);
 	if (force_subclients[0] == id && force_subclients[1] == address) {
@@ -946,21 +942,19 @@ w83792d_detect_subclients(struct i2c_client *new_client)
 	}
 
 	val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR);
-	if (!(val & 0x08))
-		data->lm75[0] = devm_i2c_new_dummy_device(&new_client->dev, adapter,
-							  0x48 + (val & 0x7));
-	if (!(val & 0x80)) {
-		if (!IS_ERR(data->lm75[0]) &&
-			((val & 0x7) == ((val >> 4) & 0x7))) {
-			dev_err(&new_client->dev,
-				"duplicate addresses 0x%x, use force_subclient\n",
-				data->lm75[0]->addr);
-			return -ENODEV;
-		}
-		data->lm75[1] = devm_i2c_new_dummy_device(&new_client->dev, adapter,
-							  0x48 + ((val >> 4) & 0x7));
+
+	if (!(val & 0x88) && (val & 0x7) == ((val >> 4) & 0x7)) {
+		dev_err(&new_client->dev,
+			"duplicate addresses 0x%x, use force_subclient\n", 0x48 + (val & 0x7));
+		return -ENODEV;
 	}
 
+	if (!(val & 0x08))
+		devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + (val & 0x7));
+
+	if (!(val & 0x80))
+		devm_i2c_new_dummy_device(&new_client->dev, adapter, 0x48 + ((val >> 4) & 0x7));
+
 	return 0;
 }
 
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index e7d0484eabe4..1d2854de1cfc 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -202,7 +202,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
 }
 
 struct w83793_data {
-	struct i2c_client *lm75[2];
 	struct device *hwmon_dev;
 	struct mutex update_lock;
 	char valid;			/* !=0 if following fields are valid */
@@ -1566,7 +1565,6 @@ w83793_detect_subclients(struct i2c_client *client)
 	int address = client->addr;
 	u8 tmp;
 	struct i2c_adapter *adapter = client->adapter;
-	struct w83793_data *data = i2c_get_clientdata(client);
 
 	id = i2c_adapter_id(adapter);
 	if (force_subclients[0] == id && force_subclients[1] == address) {
@@ -1586,21 +1584,19 @@ w83793_detect_subclients(struct i2c_client *client)
 	}
 
 	tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
-	if (!(tmp & 0x08))
-		data->lm75[0] = devm_i2c_new_dummy_device(&client->dev, adapter,
-							  0x48 + (tmp & 0x7));
-	if (!(tmp & 0x80)) {
-		if (!IS_ERR(data->lm75[0])
-		    && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
-			dev_err(&client->dev,
-				"duplicate addresses 0x%x, "
-				"use force_subclients\n", data->lm75[0]->addr);
-			return -ENODEV;
-		}
-		data->lm75[1] = devm_i2c_new_dummy_device(&client->dev, adapter,
-							  0x48 + ((tmp >> 4) & 0x7));
+
+	if (!(tmp & 0x88) && (tmp & 0x7) == ((tmp >> 4) & 0x7)) {
+		dev_err(&client->dev,
+			"duplicate addresses 0x%x, use force_subclient\n", 0x48 + (tmp & 0x7));
+		return -ENODEV;
 	}
 
+	if (!(tmp & 0x08))
+		devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + (tmp & 0x7));
+
+	if (!(tmp & 0x80))
+		devm_i2c_new_dummy_device(&client->dev, adapter, 0x48 + ((tmp >> 4) & 0x7));
+
 	return 0;
 }