cleanup after APUS removal

After the APUS removal, some code can be removed.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Karsten Keil <kkeil@suse.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/m68k/amiga/chipram.c

@@ -32,12 +32,10 @@ void __init amiga_chip_init(void)
     if (!AMIGAHW_PRESENT(CHIP_RAM))
 	return;
 
-#ifndef CONFIG_APUS_FAST_EXCEPT
     /*
      *  Remove the first 4 pages where PPC exception handlers will be located
      */
     amiga_chip_size -= 0x4000;
-#endif
     chipram_res.end = amiga_chip_size-1;
     request_resource(&iomem_resource, &chipram_res);
 

drivers/ide/ide-probe.c

@@ -1049,7 +1049,7 @@ static int init_irq (ide_hwif_t *hwif)
 	 */
 	if (!match || match->irq != hwif->irq) {
 		int sa = 0;
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
 		sa = IRQF_SHARED;
 #endif /* __mc68000__ || CONFIG_APUS */
 
@@ -1072,7 +1072,7 @@ static int init_irq (ide_hwif_t *hwif)
 			hwif->rqsize = 65536;
 	}
 
-#if !defined(__mc68000__) && !defined(CONFIG_APUS)
+#if !defined(__mc68000__)
 	printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name,
 		hwif->io_ports[IDE_DATA_OFFSET],
 		hwif->io_ports[IDE_DATA_OFFSET]+7,
@@ -1080,7 +1080,7 @@ static int init_irq (ide_hwif_t *hwif)
 #else
 	printk("%s at 0x%08lx on irq %d", hwif->name,
 		hwif->io_ports[IDE_DATA_OFFSET], hwif->irq);
-#endif /* __mc68000__ && CONFIG_APUS */
+#endif /* __mc68000__ */
 	if (match)
 		printk(" (%sed with %s)",
 			hwif->sharing_irq ? "shar" : "serializ", match->name);

drivers/isdn/hisax/avm_pci.c

@@ -263,11 +263,7 @@ hdlc_empty_fifo(struct BCState *bcs, int count)
 		outl(idx, cs->hw.avm.cfg_reg + 4);
 		while (cnt < count) {
 #ifdef __powerpc__
-#ifdef CONFIG_APUS
-			*ptr++ = in_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
-#else
 			*ptr++ = in_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE));
-#endif /* CONFIG_APUS */
 #else
 			*ptr++ = inl(cs->hw.avm.isac);
 #endif /* __powerpc__ */
@@ -328,11 +324,7 @@ hdlc_fill_fifo(struct BCState *bcs)
 	if (cs->subtyp == AVM_FRITZ_PCI) {
 		while (cnt<count) {
 #ifdef __powerpc__
-#ifdef CONFIG_APUS
-			out_le32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
-#else
 			out_be32((unsigned *)(cs->hw.avm.isac +_IO_BASE), *ptr++);
-#endif /* CONFIG_APUS */
 #else
 			outl(*ptr++, cs->hw.avm.isac);
 #endif /* __powerpc__ */

drivers/scsi/a2091.c

@@ -46,8 +46,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
     struct Scsi_Host *instance = cmd->device->host;
 
     /* don't allow DMA if the physical address is bad */
-    if (addr & A2091_XFER_MASK ||
-	(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+    if (addr & A2091_XFER_MASK)
     {
 	HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511)
 	    & ~0x1ff;

drivers/scsi/a3000.c

@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
      * end of a physical memory chunk, then allocate a bounce
      * buffer
      */
-    if (addr & A3000_XFER_MASK ||
-	(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+    if (addr & A3000_XFER_MASK)
     {
 	HDATA(a3000_host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
 	    & ~0x1ff;

drivers/scsi/gvp11.c

@@ -54,8 +54,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
     static int scsi_alloc_out_of_range = 0;
 
     /* use bounce buffer if the physical address is bad */
-    if (addr & HDATA(cmd->device->host)->dma_xfer_mask ||
-	(!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
+    if (addr & HDATA(cmd->device->host)->dma_xfer_mask)
     {
 	HDATA(cmd->device->host)->dma_bounce_len = (cmd->SCp.this_residual + 511)
 	    & ~0x1ff;

drivers/video/console/fbcon.c

@@ -84,7 +84,7 @@
 #ifdef CONFIG_MAC
 #include <asm/macints.h>
 #endif
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
 #include <asm/machdep.h>
 #include <asm/setup.h>
 #endif

drivers/video/console/fonts.c

@@ -15,7 +15,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
 #include <asm/setup.h>
 #endif
 #include <linux/font.h>
@@ -120,7 +120,7 @@ const struct font_desc *get_default_font(int xres, int yres, u32 font_w,
     for(i=0; i<num_fonts; i++) {
 	f = fonts[i];
 	c = f->pref;
-#if defined(__mc68000__) || defined(CONFIG_APUS)
+#if defined(__mc68000__)
 #ifdef CONFIG_FONT_PEARL_8x8
 	if (MACH_IS_AMIGA && f->idx == PEARL8x8_IDX)
 	    c = 100;

include/asm-m68k/pgtable.h

@@ -107,8 +107,6 @@ extern void *empty_zero_page;
 /* 64-bit machines, beware!  SRB. */
 #define SIZEOF_PTR_LOG2			       2
 
-#define mm_end_of_chunk(addr, len)	0
-
 extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
 
 /*

sound/oss/dmasound/Kconfig

@@ -14,7 +14,7 @@ config DMASOUND_ATARI
 
 config DMASOUND_PAULA
 	tristate "Amiga DMA sound support"
-	depends on (AMIGA || APUS) && SOUND
+	depends on AMIGA && SOUND
 	select DMASOUND
 	help
 	  If you want to use the internal audio of your Amiga in Linux, answer

sound/oss/dmasound/dmasound_paula.c

@@ -91,10 +91,6 @@ static irqreturn_t AmiInterrupt(int irq, void *dummy);
      *  power LED are controlled by the same line.
      */
 
-#ifdef CONFIG_APUS
-#define mach_heartbeat	ppc_md.heartbeat
-#endif
-
 static void (*saved_heartbeat)(int) = NULL;
 
 static inline void disable_heartbeat(void)