[ARM] 4507/1: pxa2xx clock_event_device
Reimplements arch/arm/mach-pxa/time.c using a clock_event_device based on OSMR0. Tested on PXA270, linux-2.6.22+arm:pxa patches. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Bill Gatliff
Russell King
Родитель
3d50527bbf
Коммит
7bbb18c9f4
|
|
@ -1,9 +1,11 @@
|
|||
/*
|
||||
* arch/arm/mach-pxa/time.c
|
||||
*
|
||||
* Author: Nicolas Pitre
|
||||
* Created: Jun 15, 2001
|
||||
* Copyright: MontaVista Software Inc.
|
||||
* PXA clocksource, clockevents, and OST interrupt handlers.
|
||||
* Copyright (c) 2007 by Bill Gatliff <bgat@billgatliff.com>.
|
||||
*
|
||||
* Derived from Nicolas Pitre's PXA timer handler Copyright (c) 2001
|
||||
* by MontaVista Software, Inc. (Nico, your code rocks!)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
|
|
@ -12,164 +14,160 @@
|
|||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/time.h>
|
||||
#include <linux/signal.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/clocksource.h>
|
||||
#include <linux/clockchips.h>
|
||||
|
||||
#include <asm/system.h>
|
||||
#include <asm/hardware.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/leds.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/irq.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <asm/arch/pxa-regs.h>
|
||||
|
||||
|
||||
static int pxa_set_rtc(void)
|
||||
{
|
||||
unsigned long current_time = xtime.tv_sec;
|
||||
|
||||
if (RTSR & RTSR_ALE) {
|
||||
/* make sure not to forward the clock over an alarm */
|
||||
unsigned long alarm = RTAR;
|
||||
if (current_time >= alarm && alarm >= RCNR)
|
||||
return -ERESTARTSYS;
|
||||
}
|
||||
RCNR = current_time;
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_NO_IDLE_HZ
|
||||
static unsigned long initial_match;
|
||||
static int match_posponed;
|
||||
#endif
|
||||
|
||||
static irqreturn_t
|
||||
pxa_timer_interrupt(int irq, void *dev_id)
|
||||
pxa_ost0_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
int next_match;
|
||||
struct clock_event_device *c = dev_id;
|
||||
|
||||
write_seqlock(&xtime_lock);
|
||||
|
||||
#ifdef CONFIG_NO_IDLE_HZ
|
||||
if (match_posponed) {
|
||||
match_posponed = 0;
|
||||
OSMR0 = initial_match;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Loop until we get ahead of the free running timer.
|
||||
* This ensures an exact clock tick count and time accuracy.
|
||||
* Since IRQs are disabled at this point, coherence between
|
||||
* lost_ticks(updated in do_timer()) and the match reg value is
|
||||
* ensured, hence we can use do_gettimeofday() from interrupt
|
||||
* handlers.
|
||||
*
|
||||
* HACK ALERT: it seems that the PXA timer regs aren't updated right
|
||||
* away in all cases when a write occurs. We therefore compare with
|
||||
* 8 instead of 0 in the while() condition below to avoid missing a
|
||||
* match if OSCR has already reached the next OSMR value.
|
||||
* Experience has shown that up to 6 ticks are needed to work around
|
||||
* this problem, but let's use 8 to be conservative. Note that this
|
||||
* affect things only when the timer IRQ has been delayed by nearly
|
||||
* exactly one tick period which should be a pretty rare event.
|
||||
if (c->mode == CLOCK_EVT_MODE_ONESHOT) {
|
||||
/* Disarm the compare/match, signal the event. */
|
||||
OIER &= ~OIER_E0;
|
||||
c->event_handler(c);
|
||||
} else if (c->mode == CLOCK_EVT_MODE_PERIODIC) {
|
||||
/* Call the event handler as many times as necessary
|
||||
* to recover missed events, if any (if we update
|
||||
* OSMR0 and OSCR0 is still ahead of us, we've missed
|
||||
* the event). As we're dealing with that, re-arm the
|
||||
* compare/match for the next event.
|
||||
*
|
||||
* HACK ALERT:
|
||||
*
|
||||
* There's a latency between the instruction that
|
||||
* writes to OSMR0 and the actual commit to the
|
||||
* physical hardware, because the CPU doesn't (have
|
||||
* to) run at bus speed, there's a write buffer
|
||||
* between the CPU and the bus, etc. etc. So if the
|
||||
* target OSCR0 is "very close", to the OSMR0 load
|
||||
* value, the update to OSMR0 might not get to the
|
||||
* hardware in time and we'll miss that interrupt.
|
||||
*
|
||||
* To be safe, if the new OSMR0 is "very close" to the
|
||||
* target OSCR0 value, we call the event_handler as
|
||||
* though the event actually happened. According to
|
||||
* Nico's comment in the previous version of this
|
||||
* code, experience has shown that 6 OSCR ticks is
|
||||
* "very close" but he went with 8. We will use 16,
|
||||
* based on the results of testing on PXA270.
|
||||
*
|
||||
* To be doubly sure, we also tell clkevt via
|
||||
* clockevents_register_device() not to ask for
|
||||
* anything that might put us "very close".
|
||||
*/
|
||||
#define MIN_OSCR_DELTA 16
|
||||
do {
|
||||
timer_tick();
|
||||
OSSR = OSSR_M0; /* Clear match on timer 0 */
|
||||
OSSR = OSSR_M0;
|
||||
next_match = (OSMR0 += LATCH);
|
||||
} while( (signed long)(next_match - OSCR) <= 8 );
|
||||
|
||||
write_sequnlock(&xtime_lock);
|
||||
c->event_handler(c);
|
||||
} while (((signed long)(next_match - OSCR) <= MIN_OSCR_DELTA)
|
||||
&& (c->mode == CLOCK_EVT_MODE_PERIODIC));
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static struct irqaction pxa_timer_irq = {
|
||||
.name = "PXA Timer Tick",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = pxa_timer_interrupt,
|
||||
static int
|
||||
pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
|
||||
{
|
||||
unsigned long irqflags;
|
||||
|
||||
raw_local_irq_save(irqflags);
|
||||
OSMR0 = OSCR + delta;
|
||||
OSSR = OSSR_M0;
|
||||
OIER |= OIER_E0;
|
||||
raw_local_irq_restore(irqflags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
|
||||
{
|
||||
unsigned long irqflags;
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
raw_local_irq_save(irqflags);
|
||||
OSMR0 = OSCR + LATCH;
|
||||
OSSR = OSSR_M0;
|
||||
OIER |= OIER_E0;
|
||||
raw_local_irq_restore(irqflags);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
raw_local_irq_save(irqflags);
|
||||
OIER &= ~OIER_E0;
|
||||
raw_local_irq_restore(irqflags);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED:
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
/* initializing, released, or preparing for suspend */
|
||||
raw_local_irq_save(irqflags);
|
||||
OIER &= ~OIER_E0;
|
||||
raw_local_irq_restore(irqflags);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static struct clock_event_device ckevt_pxa_osmr0 = {
|
||||
.name = "osmr0",
|
||||
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
||||
.shift = 32,
|
||||
.rating = 200,
|
||||
.cpumask = CPU_MASK_CPU0,
|
||||
.set_next_event = pxa_osmr0_set_next_event,
|
||||
.set_mode = pxa_osmr0_set_mode,
|
||||
};
|
||||
|
||||
static cycle_t pxa_get_cycles(void)
|
||||
static cycle_t pxa_read_oscr(void)
|
||||
{
|
||||
return OSCR;
|
||||
}
|
||||
|
||||
static struct clocksource clocksource_pxa = {
|
||||
.name = "pxa_timer",
|
||||
static struct clocksource cksrc_pxa_oscr0 = {
|
||||
.name = "oscr0",
|
||||
.rating = 200,
|
||||
.read = pxa_get_cycles,
|
||||
.read = pxa_read_oscr,
|
||||
.mask = CLOCKSOURCE_MASK(32),
|
||||
.shift = 20,
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
static struct irqaction pxa_ost0_irq = {
|
||||
.name = "ost0",
|
||||
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
||||
.handler = pxa_ost0_interrupt,
|
||||
.dev_id = &ckevt_pxa_osmr0,
|
||||
};
|
||||
|
||||
static void __init pxa_timer_init(void)
|
||||
{
|
||||
struct timespec tv;
|
||||
unsigned long flags;
|
||||
OIER = 0;
|
||||
OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
|
||||
|
||||
set_rtc = pxa_set_rtc;
|
||||
ckevt_pxa_osmr0.mult =
|
||||
div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
|
||||
ckevt_pxa_osmr0.max_delta_ns =
|
||||
clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
|
||||
ckevt_pxa_osmr0.min_delta_ns =
|
||||
clockevent_delta2ns(MIN_OSCR_DELTA, &ckevt_pxa_osmr0) + 1;
|
||||
|
||||
OIER = 0; /* disable any timer interrupts */
|
||||
OSSR = 0xf; /* clear status on all timers */
|
||||
setup_irq(IRQ_OST0, &pxa_timer_irq);
|
||||
local_irq_save(flags);
|
||||
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
|
||||
OSMR0 = OSCR + LATCH; /* set initial match */
|
||||
local_irq_restore(flags);
|
||||
cksrc_pxa_oscr0.mult =
|
||||
clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_pxa_oscr0.shift);
|
||||
|
||||
/*
|
||||
* OSCR runs continuously on PXA and is not written to,
|
||||
* so we can use it as clock source directly.
|
||||
*/
|
||||
clocksource_pxa.mult =
|
||||
clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_pxa.shift);
|
||||
clocksource_register(&clocksource_pxa);
|
||||
setup_irq(IRQ_OST0, &pxa_ost0_irq);
|
||||
|
||||
clocksource_register(&cksrc_pxa_oscr0);
|
||||
clockevents_register_device(&ckevt_pxa_osmr0);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_NO_IDLE_HZ
|
||||
static int pxa_dyn_tick_enable_disable(void)
|
||||
{
|
||||
/* nothing to do */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void pxa_dyn_tick_reprogram(unsigned long ticks)
|
||||
{
|
||||
if (ticks > 1) {
|
||||
initial_match = OSMR0;
|
||||
OSMR0 = initial_match + ticks * LATCH;
|
||||
match_posponed = 1;
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
pxa_dyn_tick_handler(int irq, void *dev_id)
|
||||
{
|
||||
if (match_posponed) {
|
||||
match_posponed = 0;
|
||||
OSMR0 = initial_match;
|
||||
if ( (signed long)(initial_match - OSCR) <= 8 )
|
||||
return pxa_timer_interrupt(irq, dev_id);
|
||||
}
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static struct dyn_tick_timer pxa_dyn_tick = {
|
||||
.enable = pxa_dyn_tick_enable_disable,
|
||||
.disable = pxa_dyn_tick_enable_disable,
|
||||
.reprogram = pxa_dyn_tick_reprogram,
|
||||
.handler = pxa_dyn_tick_handler,
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static unsigned long osmr[4], oier;
|
||||
|
||||
|
|
@ -191,7 +189,10 @@ static void pxa_timer_resume(void)
|
|||
OIER = oier;
|
||||
|
||||
/*
|
||||
* OSMR0 is the system timer: make sure OSCR is sufficiently behind
|
||||
* OSCR0 is the system timer, which has to increase
|
||||
* monotonically until it rolls over in hardware. The value
|
||||
* (OSMR0 - LATCH) is OSCR0 at the most recent system tick,
|
||||
* which is a handy value to restore to OSCR0.
|
||||
*/
|
||||
OSCR = OSMR0 - LATCH;
|
||||
}
|
||||
|
|
@ -204,7 +205,4 @@ struct sys_timer pxa_timer = {
|
|||
.init = pxa_timer_init,
|
||||
.suspend = pxa_timer_suspend,
|
||||
.resume = pxa_timer_resume,
|
||||
#ifdef CONFIG_NO_IDLE_HZ
|
||||
.dyn_tick = &pxa_dyn_tick,
|
||||
#endif
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче