[media] em28xx: Add support for 1b80:e1cc Delock 61959

Hardware is the same as MaxMedia UB425-TC but ships with a different
remote.

Signed-off-by: Jakob Haufe <sur5r@sur5r.net>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Jakob Haufe 2013-04-13 11:03:37 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 3020bea57f
Коммит 7c1dfdb059
3 изменённых файлов: 20 добавлений и 2 удалений

Просмотреть файл

@ -374,6 +374,7 @@ static struct em28xx_reg_seq hauppauge_930c_digital[] = {
#endif
/* 1b80:e425 MaxMedia UB425-TC
* 1b80:e1cc Delock 61959
* GPIO_6 - demod reset, 0=active
* GPIO_7 - LED, 0=active
*/
@ -2017,6 +2018,19 @@ struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
/* 1b80:e1cc Delock 61959
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
* mostly the same as MaxMedia UB-425-TC but different remote */
[EM2874_BOARD_DELOCK_61959] = {
.name = "Delock 61959",
.tuner_type = TUNER_ABSENT,
.tuner_gpio = maxmedia_ub425_tc,
.has_dvb = 1,
.ir_codes = RC_MAP_DELOCK_61959,
.def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
},
};
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
@ -2178,6 +2192,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2884_BOARD_PCTV_510E },
{ USB_DEVICE(0x2013, 0x0251),
.driver_info = EM2884_BOARD_PCTV_520E },
{ USB_DEVICE(0x1b80, 0xe1cc),
.driver_info = EM2874_BOARD_DELOCK_61959 },
{ },
};
MODULE_DEVICE_TABLE(usb, em28xx_id_table);

Просмотреть файл

@ -1216,6 +1216,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
&em28xx_a8293_config);
break;
case EM2874_BOARD_DELOCK_61959:
case EM2874_BOARD_MAXMEDIA_UB425_TC:
/* attach demodulator */
dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk,
@ -1235,8 +1236,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
}
/* TODO: we need drx-3913k firmware in order to support DVB-T */
em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \
"driver version\n");
em28xx_info("MaxMedia UB425-TC/Delock 61959: only DVB-C " \
"supported by that driver version\n");
break;
case EM2884_BOARD_PCTV_510E:

Просмотреть файл

@ -130,6 +130,7 @@
#define EM2884_BOARD_PCTV_520E 86
#define EM2884_BOARD_TERRATEC_HTC_USB_XS 87
#define EM2884_BOARD_C3TECH_DIGITAL_DUO 88
#define EM2874_BOARD_DELOCK_61959 89
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4