diff --git a/drivers/parisc/Makefile b/drivers/parisc/Makefile index 3cd5e6cb8478..99fa6a89e0b9 100644 --- a/drivers/parisc/Makefile +++ b/drivers/parisc/Makefile @@ -8,9 +8,6 @@ obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_IOMMU_SBA) += sba_iommu.o obj-$(CONFIG_PCI_LBA) += lba_pci.o - -# Only use one of them: ccio-rm-dma is for PCX-W systems *only* -# obj-$(CONFIG_IOMMU_CCIO) += ccio-rm-dma.o obj-$(CONFIG_IOMMU_CCIO) += ccio-dma.o obj-$(CONFIG_GSC) += gsc.o diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c deleted file mode 100644 index df7932af48b7..000000000000 --- a/drivers/parisc/ccio-rm-dma.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * ccio-rm-dma.c: - * DMA management routines for first generation cache-coherent machines. - * "Real Mode" operation refers to U2/Uturn chip operation. The chip - * can perform coherency checks w/o using the I/O MMU. That's all we - * need until support for more than 4GB phys mem is needed. - * - * This is the trivial case - basically what x86 does. - * - * Drawbacks of using Real Mode are: - * o outbound DMA is slower since one isn't using the prefetching - * U2 can do for outbound DMA. - * o Ability to do scatter/gather in HW is also lost. - * o only known to work with PCX-W processor. (eg C360) - * (PCX-U/U+ are not coherent with U2 in real mode.) - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * - * Original version/author: - * CVSROOT=:pserver:anonymous@198.186.203.37:/cvsroot/linux-parisc - * cvs -z3 co linux/arch/parisc/kernel/dma-rm.c - * - * (C) Copyright 2000 Philipp Rumpf - * - * - * Adopted for The Puffin Group's parisc-linux port by Grant Grundler. - * (C) Copyright 2000 Grant Grundler - * - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -/* Only chose "ccio" since that's what HP-UX calls it.... -** Make it easier for folks to migrate from one to the other :^) -*/ -#define MODULE_NAME "ccio" - -#define U2_IOA_RUNWAY 0x580 -#define U2_BC_GSC 0x501 -#define UTURN_IOA_RUNWAY 0x581 -#define UTURN_BC_GSC 0x502 - -#define IS_U2(id) ( \ - (((id)->hw_type == HPHW_IOA) && ((id)->hversion == U2_IOA_RUNWAY)) || \ - (((id)->hw_type == HPHW_BCPORT) && ((id)->hversion == U2_BC_GSC)) \ -) - -#define IS_UTURN(id) ( \ - (((id)->hw_type == HPHW_IOA) && ((id)->hversion == UTURN_IOA_RUNWAY)) || \ - (((id)->hw_type == HPHW_BCPORT) && ((id)->hversion == UTURN_BC_GSC)) \ -) - -static int ccio_dma_supported( struct pci_dev *dev, u64 mask) -{ - if (dev == NULL) { - printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); - BUG(); - return(0); - } - - /* only support 32-bit devices (ie PCI/GSC) */ - return((int) (mask >= 0xffffffffUL)); -} - - -static void *ccio_alloc_consistent(struct pci_dev *dev, size_t size, - dma_addr_t *handle) -{ - void *ret; - - ret = (void *)__get_free_pages(GFP_ATOMIC, get_order(size)); - - if (ret != NULL) { - memset(ret, 0, size); - *handle = virt_to_phys(ret); - } - return ret; -} - -static void ccio_free_consistent(struct pci_dev *dev, size_t size, - void *vaddr, dma_addr_t handle) -{ - free_pages((unsigned long)vaddr, get_order(size)); -} - -static dma_addr_t ccio_map_single(struct pci_dev *dev, void *ptr, size_t size, - int direction) -{ - return virt_to_phys(ptr); -} - -static void ccio_unmap_single(struct pci_dev *dev, dma_addr_t dma_addr, - size_t size, int direction) -{ - /* Nothing to do */ -} - - -static int ccio_map_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents, int direction) -{ - int tmp = nents; - - /* KISS: map each buffer separately. */ - while (nents) { - sg_dma_address(sglist) = ccio_map_single(dev, sglist->address, sglist->length, direction); - sg_dma_len(sglist) = sglist->length; - nents--; - sglist++; - } - - return tmp; -} - - -static void ccio_unmap_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents, int direction) -{ -#if 0 - while (nents) { - ccio_unmap_single(dev, sg_dma_address(sglist), sg_dma_len(sglist), direction); - nents--; - sglist++; - } - return; -#else - /* Do nothing (copied from current ccio_unmap_single() :^) */ -#endif -} - - -static struct pci_dma_ops ccio_ops = { - ccio_dma_supported, - ccio_alloc_consistent, - ccio_free_consistent, - ccio_map_single, - ccio_unmap_single, - ccio_map_sg, - ccio_unmap_sg, - NULL, /* dma_sync_single_for_cpu : NOP for U2 */ - NULL, /* dma_sync_single_for_device : NOP for U2 */ - NULL, /* dma_sync_sg_for_cpu : ditto */ - NULL, /* dma_sync_sg_for_device : ditto */ -}; - - -/* -** Determine if u2 should claim this chip (return 0) or not (return 1). -** If so, initialize the chip and tell other partners in crime they -** have work to do. -*/ -static int __init -ccio_probe(struct parisc_device *dev) -{ - printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME, - dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn", - dev->hpa.start); - -/* -** FIXME - should check U2 registers to verify it's really running -** in "Real Mode". -*/ - -#if 0 -/* will need this for "Virtual Mode" operation */ - ccio_hw_init(ccio_dev); - ccio_common_init(ccio_dev); -#endif - hppa_dma_ops = &ccio_ops; - return 0; -} - -static const struct parisc_device_id ccio_tbl[] __initconst = { - { HPHW_BCPORT, HVERSION_REV_ANY_ID, U2_BC_GSC, 0xc }, - { HPHW_BCPORT, HVERSION_REV_ANY_ID, UTURN_BC_GSC, 0xc }, - { 0, } -}; - -static struct parisc_driver ccio_driver __refdata = { - .name = "U2/Uturn", - .id_table = ccio_tbl, - .probe = ccio_probe, -}; - -void __init ccio_init(void) -{ - register_parisc_driver(&ccio_driver); -}