Merge branch 'linus' into irq/core

Reason: Get the upstream IRQF_DISABLED related changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Documentation/DocBook/tracepoint.tmpl

@@ -16,6 +16,15 @@
      </address>
     </affiliation>
    </author>
+   <author>
+    <firstname>William</firstname>
+    <surname>Cohen</surname>
+    <affiliation>
+     <address>
+      <email>wcohen@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
   </authorgroup>
 
   <legalnotice>
@@ -91,4 +100,8 @@
 !Iinclude/trace/events/signal.h
   </chapter>
 
+  <chapter id="block">
+   <title>Block IO</title>
+!Iinclude/trace/events/block.h
+  </chapter>
 </book>

Documentation/block/biodoc.txt

@@ -1162,8 +1162,8 @@ where a driver received a request ala this before:
 
 As mentioned, there is no virtual mapping of a bio. For DMA, this is
 not a problem as the driver probably never will need a virtual mapping.
-Instead it needs a bus mapping (pci_map_page for a single segment or
-use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
+Instead it needs a bus mapping (dma_map_page for a single segment or
+use dma_map_sg for scatter gather) to be able to ship it to the driver. For
 PIO drivers (or drivers that need to revert to PIO transfer once in a
 while (IDE for example)), where the CPU is doing the actual data
 transfer a virtual mapping is needed. If the driver supports highmem I/O,

Documentation/cgroups/memory.txt

@@ -340,7 +340,7 @@ Note:
 5.3 swappiness
   Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
 
-  Following cgroups' swapiness can't be changed.
+  Following cgroups' swappiness can't be changed.
   - root cgroup (uses /proc/sys/vm/swappiness).
   - a cgroup which uses hierarchy and it has child cgroup.
   - a cgroup which uses hierarchy and not the root of hierarchy.

Documentation/circular-buffers.txt

@@ -0,0 +1,234 @@
+			       ================
+			       CIRCULAR BUFFERS
+			       ================
+
+By: David Howells <dhowells@redhat.com>
+    Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+
+Linux provides a number of features that can be used to implement circular
+buffering.  There are two sets of such features:
+
+ (1) Convenience functions for determining information about power-of-2 sized
+     buffers.
+
+ (2) Memory barriers for when the producer and the consumer of objects in the
+     buffer don't want to share a lock.
+
+To use these facilities, as discussed below, there needs to be just one
+producer and just one consumer.  It is possible to handle multiple producers by
+serialising them, and to handle multiple consumers by serialising them.
+
+
+Contents:
+
+ (*) What is a circular buffer?
+
+ (*) Measuring power-of-2 buffers.
+
+ (*) Using memory barriers with circular buffers.
+     - The producer.
+     - The consumer.
+
+
+==========================
+WHAT IS A CIRCULAR BUFFER?
+==========================
+
+First of all, what is a circular buffer?  A circular buffer is a buffer of
+fixed, finite size into which there are two indices:
+
+ (1) A 'head' index - the point at which the producer inserts items into the
+     buffer.
+
+ (2) A 'tail' index - the point at which the consumer finds the next item in
+     the buffer.
+
+Typically when the tail pointer is equal to the head pointer, the buffer is
+empty; and the buffer is full when the head pointer is one less than the tail
+pointer.
+
+The head index is incremented when items are added, and the tail index when
+items are removed.  The tail index should never jump the head index, and both
+indices should be wrapped to 0 when they reach the end of the buffer, thus
+allowing an infinite amount of data to flow through the buffer.
+
+Typically, items will all be of the same unit size, but this isn't strictly
+required to use the techniques below.  The indices can be increased by more
+than 1 if multiple items or variable-sized items are to be included in the
+buffer, provided that neither index overtakes the other.  The implementer must
+be careful, however, as a region more than one unit in size may wrap the end of
+the buffer and be broken into two segments.
+
+
+============================
+MEASURING POWER-OF-2 BUFFERS
+============================
+
+Calculation of the occupancy or the remaining capacity of an arbitrarily sized
+circular buffer would normally be a slow operation, requiring the use of a
+modulus (divide) instruction.  However, if the buffer is of a power-of-2 size,
+then a much quicker bitwise-AND instruction can be used instead.
+
+Linux provides a set of macros for handling power-of-2 circular buffers.  These
+can be made use of by:
+
+	#include <linux/circ_buf.h>
+
+The macros are:
+
+ (*) Measure the remaining capacity of a buffer:
+
+	CIRC_SPACE(head_index, tail_index, buffer_size);
+
+     This returns the amount of space left in the buffer[1] into which items
+     can be inserted.
+
+
+ (*) Measure the maximum consecutive immediate space in a buffer:
+
+	CIRC_SPACE_TO_END(head_index, tail_index, buffer_size);
+
+     This returns the amount of consecutive space left in the buffer[1] into
+     which items can be immediately inserted without having to wrap back to the
+     beginning of the buffer.
+
+
+ (*) Measure the occupancy of a buffer:
+
+	CIRC_CNT(head_index, tail_index, buffer_size);
+
+     This returns the number of items currently occupying a buffer[2].
+
+
+ (*) Measure the non-wrapping occupancy of a buffer:
+
+	CIRC_CNT_TO_END(head_index, tail_index, buffer_size);
+
+     This returns the number of consecutive items[2] that can be extracted from
+     the buffer without having to wrap back to the beginning of the buffer.
+
+
+Each of these macros will nominally return a value between 0 and buffer_size-1,
+however:
+
+ [1] CIRC_SPACE*() are intended to be used in the producer.  To the producer
+     they will return a lower bound as the producer controls the head index,
+     but the consumer may still be depleting the buffer on another CPU and
+     moving the tail index.
+
+     To the consumer it will show an upper bound as the producer may be busy
+     depleting the space.
+
+ [2] CIRC_CNT*() are intended to be used in the consumer.  To the consumer they
+     will return a lower bound as the consumer controls the tail index, but the
+     producer may still be filling the buffer on another CPU and moving the
+     head index.
+
+     To the producer it will show an upper bound as the consumer may be busy
+     emptying the buffer.
+
+ [3] To a third party, the order in which the writes to the indices by the
+     producer and consumer become visible cannot be guaranteed as they are
+     independent and may be made on different CPUs - so the result in such a
+     situation will merely be a guess, and may even be negative.
+
+
+===========================================
+USING MEMORY BARRIERS WITH CIRCULAR BUFFERS
+===========================================
+
+By using memory barriers in conjunction with circular buffers, you can avoid
+the need to:
+
+ (1) use a single lock to govern access to both ends of the buffer, thus
+     allowing the buffer to be filled and emptied at the same time; and
+
+ (2) use atomic counter operations.
+
+There are two sides to this: the producer that fills the buffer, and the
+consumer that empties it.  Only one thing should be filling a buffer at any one
+time, and only one thing should be emptying a buffer at any one time, but the
+two sides can operate simultaneously.
+
+
+THE PRODUCER
+------------
+
+The producer will look something like this:
+
+	spin_lock(&producer_lock);
+
+	unsigned long head = buffer->head;
+	unsigned long tail = ACCESS_ONCE(buffer->tail);
+
+	if (CIRC_SPACE(head, tail, buffer->size) >= 1) {
+		/* insert one item into the buffer */
+		struct item *item = buffer[head];
+
+		produce_item(item);
+
+		smp_wmb(); /* commit the item before incrementing the head */
+
+		buffer->head = (head + 1) & (buffer->size - 1);
+
+		/* wake_up() will make sure that the head is committed before
+		 * waking anyone up */
+		wake_up(consumer);
+	}
+
+	spin_unlock(&producer_lock);
+
+This will instruct the CPU that the contents of the new item must be written
+before the head index makes it available to the consumer and then instructs the
+CPU that the revised head index must be written before the consumer is woken.
+
+Note that wake_up() doesn't have to be the exact mechanism used, but whatever
+is used must guarantee a (write) memory barrier between the update of the head
+index and the change of state of the consumer, if a change of state occurs.
+
+
+THE CONSUMER
+------------
+
+The consumer will look something like this:
+
+	spin_lock(&consumer_lock);
+
+	unsigned long head = ACCESS_ONCE(buffer->head);
+	unsigned long tail = buffer->tail;
+
+	if (CIRC_CNT(head, tail, buffer->size) >= 1) {
+		/* read index before reading contents at that index */
+		smp_read_barrier_depends();
+
+		/* extract one item from the buffer */
+		struct item *item = buffer[tail];
+
+		consume_item(item);
+
+		smp_mb(); /* finish reading descriptor before incrementing tail */
+
+		buffer->tail = (tail + 1) & (buffer->size - 1);
+	}
+
+	spin_unlock(&consumer_lock);
+
+This will instruct the CPU to make sure the index is up to date before reading
+the new item, and then it shall make sure the CPU has finished reading the item
+before it writes the new tail pointer, which will erase the item.
+
+
+Note the use of ACCESS_ONCE() in both algorithms to read the opposition index.
+This prevents the compiler from discarding and reloading its cached value -
+which some compilers will do across smp_read_barrier_depends().  This isn't
+strictly needed if you can be sure that the opposition index will _only_ be
+used the once.
+
+
+===============
+FURTHER READING
+===============
+
+See also Documentation/memory-barriers.txt for a description of Linux's memory
+barrier facilities.

Documentation/connector/cn_test.c

@@ -25,6 +25,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/skbuff.h>
+#include <linux/slab.h>
 #include <linux/timer.h>
 
 #include <linux/connector.h>

Documentation/fb/efifb.txt

@@ -1,9 +1,9 @@
 
-What is imacfb?
+What is efifb?
 ===============
 
 This is a generic EFI platform driver for Intel based Apple computers.
-Imacfb is only for EFI booted Intel Macs.
+efifb is only for EFI booted Intel Macs.
 
 Supported Hardware
 ==================
@@ -16,16 +16,16 @@ MacMini
 How to use it?
 ==============
 
-Imacfb does not have any kind of autodetection of your machine.
+efifb does not have any kind of autodetection of your machine.
 You have to add the following kernel parameters in your elilo.conf:
 	Macbook :
-		video=imacfb:macbook
+		video=efifb:macbook
 	MacMini :
-		video=imacfb:mini
+		video=efifb:mini
 	Macbook Pro 15", iMac 17" :
-		video=imacfb:i17
+		video=efifb:i17
 	Macbook Pro 17", iMac 20" :
-		video=imacfb:i20
+		video=efifb:i20
 
 --
 Edgar Hucek <gimli@dark-green.com>

Documentation/filesystems/00-INDEX

@@ -16,6 +16,8 @@ befs.txt
 	- information about the BeOS filesystem for Linux.
 bfs.txt
 	- info for the SCO UnixWare Boot Filesystem (BFS).
+ceph.txt
+	- info for the Ceph Distributed File System
 cifs.txt
 	- description of the CIFS filesystem.
 coda.txt

Documentation/filesystems/9p.txt

@@ -37,6 +37,15 @@ For Plan 9 From User Space applications (http://swtch.com/plan9)
 
 	mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
 
+For server running on QEMU host with virtio transport:
+
+	mount -t 9p -o trans=virtio <mount_tag> /mnt/9
+
+where mount_tag is the tag associated by the server to each of the exported
+mount points. Each 9P export is seen by the client as a virtio device with an
+associated "mount_tag" property. Available mount tags can be
+seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
+
 OPTIONS
 =======
 
@@ -47,7 +56,7 @@ OPTIONS
 			fd   	- used passed file descriptors for connection
                                 (see rfdno and wfdno)
 			virtio	- connect to the next virtio channel available
-				(from lguest or KVM with trans_virtio module)
+				(from QEMU with trans_virtio module)
 			rdma	- connect to a specified RDMA channel
 
   uname=name	user name to attempt mount as on the remote server.  The
@@ -85,7 +94,12 @@ OPTIONS
 
   port=n	port to connect to on the remote server
 
-  noextend	force legacy mode (no 9p2000.u semantics)
+  noextend	force legacy mode (no 9p2000.u or 9p2000.L semantics)
+
+  version=name	Select 9P protocol version. Valid options are:
+			9p2000          - Legacy mode (same as noextend)
+			9p2000.u        - Use 9P2000.u protocol
+			9p2000.L        - Use 9P2000.L protocol
 
   dfltuid	attempt to mount as a particular uid
 

Documentation/filesystems/ceph.txt

@@ -8,7 +8,7 @@ Basic features include:
 
  * POSIX semantics
  * Seamless scaling from 1 to many thousands of nodes
- * High availability and reliability.  No single points of failure.
+ * High availability and reliability.  No single point of failure.
  * N-way replication of data across storage nodes
  * Fast recovery from node failures
  * Automatic rebalancing of data on node addition/removal
@@ -94,7 +94,7 @@ Mount Options
 
   wsize=X
 	Specify the maximum write size in bytes.  By default there is no
-	maximu.  Ceph will normally size writes based on the file stripe
+	maximum.  Ceph will normally size writes based on the file stripe
 	size.
 
   rsize=X
@@ -115,7 +115,7 @@ Mount Options
 	number of entries in that directory.
 
   nocrc
-	Disable CRC32C calculation for data writes.  If set, the OSD
+	Disable CRC32C calculation for data writes.  If set, the storage node
 	must rely on TCP's error correction to detect data corruption
 	in the data payload.
 
@@ -133,7 +133,8 @@ For more information on Ceph, see the home page at
 	http://ceph.newdream.net/
 
 The Linux kernel client source tree is available at
-	git://ceph.newdream.net/linux-ceph-client.git
+	git://ceph.newdream.net/git/ceph-client.git
+	git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 
 and the source for the full system is at
-	git://ceph.newdream.net/ceph.git
+	git://ceph.newdream.net/git/ceph.git

Documentation/filesystems/tmpfs.txt

@@ -82,11 +82,13 @@ tmpfs has a mount option to set the NUMA memory allocation policy for
 all files in that instance (if CONFIG_NUMA is enabled) - which can be
 adjusted on the fly via 'mount -o remount ...'
 
-mpol=default             prefers to allocate memory from the local node
+mpol=default             use the process allocation policy
+                         (see set_mempolicy(2))
 mpol=prefer:Node         prefers to allocate memory from the given Node
 mpol=bind:NodeList       allocates memory only from nodes in NodeList
 mpol=interleave          prefers to allocate from each node in turn
 mpol=interleave:NodeList allocates from each node of NodeList in turn
+mpol=local		 prefers to allocate memory from the local node
 
 NodeList format is a comma-separated list of decimal numbers and ranges,
 a range being two hyphen-separated decimal numbers, the smallest and
@@ -134,3 +136,5 @@ Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
    Hugh Dickins, 4 June 2007
+Updated:
+   KOSAKI Motohiro, 16 Mar 2010

Documentation/memory-barriers.txt

@@ -3,6 +3,7 @@
 			 ============================
 
 By: David Howells <dhowells@redhat.com>
+    Paul E. McKenney <paulmck@linux.vnet.ibm.com>
 
 Contents:
 
@@ -60,6 +61,10 @@ Contents:
 
      - And then there's the Alpha.
 
+ (*) Example uses.
+
+     - Circular buffers.
+
  (*) References.
 
 
@@ -2226,6 +2231,21 @@ The Alpha defines the Linux kernel's memory barrier model.
 See the subsection on "Cache Coherency" above.
 
 
+============
+EXAMPLE USES
+============
+
+CIRCULAR BUFFERS
+----------------
+
+Memory barriers can be used to implement circular buffering without the need
+of a lock to serialise the producer with the consumer.  See:
+
+	Documentation/circular-buffers.txt
+
+for details.
+
+
 ==========
 REFERENCES
 ==========

Documentation/networking/stmmac.txt

@@ -0,0 +1,143 @@
+       STMicroelectronics 10/100/1000 Synopsys Ethernet driver
+
+Copyright (C) 2007-2010  STMicroelectronics Ltd
+Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
+(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+
+Currently this network device driver is for all STM embedded MAC/GMAC
+(7xxx SoCs).
+
+DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing the first code
+implementation.
+
+Please, for more information also visit: www.stlinux.com
+
+1) Kernel Configuration
+The kernel configuration option is STMMAC_ETH:
+ Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
+ STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
+
+2) Driver parameters list:
+	debug: message level (0: no output, 16: all);
+	phyaddr: to manually provide the physical address to the PHY device;
+	dma_rxsize: DMA rx ring size;
+	dma_txsize: DMA tx ring size;
+	buf_sz: DMA buffer size;
+	tc: control the HW FIFO threshold;
+	tx_coe: Enable/Disable Tx Checksum Offload engine;
+	watchdog: transmit timeout (in milliseconds);
+	flow_ctrl: Flow control ability [on/off];
+	pause: Flow Control Pause Time;
+	tmrate: timer period (only if timer optimisation is configured).
+
+3) Command line options
+Driver parameters can be also passed in command line by using:
+	stmmaceth=dma_rxsize:128,dma_txsize:512
+
+4) Driver information and notes
+
+4.1) Transmit process
+The xmit method is invoked when the kernel needs to transmit a packet; it sets
+the descriptors in the ring and informs the DMA engine that there is a packet
+ready to be transmitted.
+Once the controller has finished transmitting the packet, an interrupt is
+triggered; So the driver will be able to release the socket buffers.
+By default, the driver sets the NETIF_F_SG bit in the features field of the
+net_device structure enabling the scatter/gather feature.
+
+4.2) Receive process
+When one or more packets are received, an interrupt happens. The interrupts
+are not queued so the driver has to scan all the descriptors in the ring during
+the receive process.
+This is based on NAPI so the interrupt handler signals only if there is work to be
+done, and it exits.
+Then the poll method will be scheduled at some future point.
+The incoming packets are stored, by the DMA, in a list of pre-allocated socket
+buffers in order to avoid the memcpy (Zero-copy).
+
+4.3) Timer-Driver Interrupt
+Instead of having the device that asynchronously notifies the frame receptions, the
+driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the device
+will experience different levels of latency. Some NICs have dedicated timer
+device to perform this task. STMMAC can use either the RTC device or the TMU
+channel 2  on STLinux platforms.
+The timers frequency can be passed to the driver as parameter; when change it,
+take care of both hardware capability and network stability/performance impact.
+Several performance tests on STM platforms showed this optimisation allows to spare
+the CPU while having the maximum throughput.
+
+4.4) WOL
+Wake up on Lan feature through Magic Frame is only supported for the GMAC
+core.
+
+4.5) DMA descriptors
+Driver handles both normal and enhanced descriptors. The latter has been only
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+
+4.6) Ethtool support
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.7) Jumbo and Segmentation Offloading
+Jumbo frames are supported and tested for the GMAC.
+The GSO has been also added but it's performed in software.
+LRO is not supported.
+
+4.8) Physical
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.9) Platform information
+Several information came from the platform; please refer to the
+driver's Header file in include/linux directory.
+
+struct plat_stmmacenet_data {
+        int bus_id;
+        int pbl;
+        int has_gmac;
+        void (*fix_mac_speed)(void *priv, unsigned int speed);
+        void (*bus_setup)(unsigned long ioaddr);
+#ifdef CONFIG_STM_DRIVERS
+        struct stm_pad_config *pad_config;
+#endif
+        void *bsp_priv;
+};
+
+Where:
+- pbl (Programmable Burst Length) is maximum number of
+  beats to be transferred in one DMA transaction.
+  GMAC also enables the 4xPBL by default.
+- fix_mac_speed and bus_setup are used to configure internal target
+  registers (on STM platforms);
+- has_gmac: GMAC core is on board (get it at run-time in the next step);
+- bus_id: bus identifier.
+
+struct plat_stmmacphy_data {
+        int bus_id;
+        int phy_addr;
+        unsigned int phy_mask;
+        int interface;
+        int (*phy_reset)(void *priv);
+        void *priv;
+};
+
+Where:
+- bus_id: bus identifier;
+- phy_addr: physical address used for the attached phy device;
+            set it to -1 to get it at run-time;
+- interface: physical MII interface mode;
+- phy_reset: hook to reset HW function.
+
+TODO:
+- Continue to make the driver more generic and suitable for other Synopsys
+  Ethernet controllers used on other architectures (i.e. ARM).
+- 10G controllers are not supported.
+- MAC uses Normal descriptors and GMAC uses enhanced ones.
+  This is a limit that should be reviewed. MAC could want to
+  use the enhanced structure.
+- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- Review the timer optimisation code to use an embedded device that seems to be
+  available in new chip generations.

Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt

@@ -21,6 +21,15 @@ Required properties:
 - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
   threads.
 
+Optional properties:
+- fsl,firmware-phandle:
+    Usage: required only if there is no fsl,qe-firmware child node
+    Value type: <phandle>
+    Definition: Points to a firmware node (see "QE Firmware Node" below)
+        that contains the firmware that should be uploaded for this QE.
+        The compatible property for the firmware node should say,
+        "fsl,qe-firmware".
+
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
   generators in Hz.
@@ -59,3 +68,48 @@ Example:
 		reg = <0 c000>;
 	};
      };
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties.  The node should be placed
+inside a QE node that needs it.  Doing so eliminates the need for a
+fsl,firmware-phandle property.  Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: A standard property.  Specify a string that indicates what
+          kind of firmware it is.  For QE, this should be "fsl,qe-firmware".
+
+   - fsl,firmware
+      Usage: required
+      Value type: <prop-encoded-array>, encoded as an array of bytes
+      Definition: A standard property.  This property contains the firmware
+          binary "blob".
+
+Example:
+	qe1@e0080000 {
+		compatible = "fsl,qe";
+		qe_firmware:qe-firmware {
+			compatible = "fsl,qe-firmware";
+			fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+		};
+		...
+	};
+
+	qe2@e0090000 {
+		compatible = "fsl,qe";
+		fsl,firmware-phandle = <&qe_firmware>;
+		...
+	};

Documentation/sound/alsa/HD-Audio.txt

@@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
-In rare but some cases, the interrupt isn't properly handled as
-default.  You would notice this by the DMA transfer error reported by
-ALSA PCM core, for example.  Using MSI might help in such a case.
-Pass `enable_msi=1` option for enabling MSI.
+HD-audio driver uses MSI as default (if available) since 2.6.33
+kernel as MSI works better on some machines, and in general, it's
+better for performance.  However, Nvidia controllers showed bad
+regressions with MSI (especially in a combination with AMD chipset),
+thus we disabled MSI for them.
+
+There seem also still other devices that don't work with MSI.  If you
+see a regression wrt the sound quality (stuttering, etc) or a lock-up
+in the recent kernel, try to pass `enable_msi=0` option to disable
+MSI.  If it works, you can add the known bad device to the blacklist
+defined in hda_intel.c.  In such a case, please report and give the
+patch back to the upstream developer. 
 
 
 HD-AUDIO CODEC

Documentation/volatile-considered-harmful.txt

@@ -63,9 +63,9 @@ way to perform a busy wait is:
         cpu_relax();
 
 The cpu_relax() call can lower CPU power consumption or yield to a
-hyperthreaded twin processor; it also happens to serve as a memory barrier,
-so, once again, volatile is unnecessary.  Of course, busy-waiting is
-generally an anti-social act to begin with.
+hyperthreaded twin processor; it also happens to serve as a compiler
+barrier, so, once again, volatile is unnecessary.  Of course, busy-
+waiting is generally an anti-social act to begin with.
 
 There are still a few rare situations where volatile makes sense in the
 kernel:

Documentation/watchdog/src/watchdog-simple.c

@@ -17,9 +17,6 @@ int main(void)
 			ret = -1;
 			break;
 		}
-		ret = fsync(fd);
-		if (ret)
-			break;
 		sleep(10);
 	}
 	close(fd);

Documentation/watchdog/src/watchdog-test.c

@@ -31,6 +31,8 @@ static void keep_alive(void)
  */
 int main(int argc, char *argv[])
 {
+    int flags;
+
     fd = open("/dev/watchdog", O_WRONLY);
 
     if (fd == -1) {
@@ -41,12 +43,14 @@ int main(int argc, char *argv[])
 
     if (argc > 1) {
 	if (!strncasecmp(argv[1], "-d", 2)) {
-	    ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
+	    flags = WDIOS_DISABLECARD;
+	    ioctl(fd, WDIOC_SETOPTIONS, &flags);
 	    fprintf(stderr, "Watchdog card disabled.\n");
 	    fflush(stderr);
 	    exit(0);
 	} else if (!strncasecmp(argv[1], "-e", 2)) {
-	    ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
+	    flags = WDIOS_ENABLECARD;
+	    ioctl(fd, WDIOC_SETOPTIONS, &flags);
 	    fprintf(stderr, "Watchdog card enabled.\n");
 	    fflush(stderr);
 	    exit(0);

Documentation/watchdog/watchdog-api.txt

@@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit.
     ioctl(fd, WDIOC_GETTEMP, &temperature);
 
 Finally the SETOPTIONS ioctl can be used to control some aspects of
-the cards operation; right now the pcwd driver is the only one
-supporting this ioctl.
+the cards operation.
 
     int options = 0;
-    ioctl(fd, WDIOC_SETOPTIONS, options);
+    ioctl(fd, WDIOC_SETOPTIONS, &options);
 
 The following options are available:
 

MAINTAINERS

@@ -797,12 +797,12 @@ M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
 ARM/NOMADIK ARCHITECTURE
-M:     Alessandro Rubini <rubini@unipv.it>
-M:     STEricsson <STEricsson_nomadik_linux@list.st.com>
-L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:     Maintained
-F:     arch/arm/mach-nomadik/
-F:     arch/arm/plat-nomadik/
+M:	Alessandro Rubini <rubini@unipv.it>
+M:	STEricsson <STEricsson_nomadik_linux@list.st.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-nomadik/
+F:	arch/arm/plat-nomadik/
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 M:	Nelson Castillo <arhuaco@freaks-unidos.net>
@@ -971,6 +971,16 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/U300 MACHINE SUPPORT
+M:	Linus Walleij <linus.walleij@stericsson.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	arch/arm/mach-u300/
+F:	drivers/i2c/busses/i2c-stu300.c
+F:	drivers/rtc/rtc-coh901331.c
+F:	drivers/watchdog/coh901327_wdt.c
+F:	drivers/dma/coh901318*
+
 ARM/U8500 ARM ARCHITECTURE
 M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1443,7 +1453,7 @@ F:	arch/powerpc/platforms/cell/
 
 CEPH DISTRIBUTED FILE SYSTEM CLIENT
 M:	Sage Weil <sage@newdream.net>
-L:	ceph-devel@lists.sourceforge.net
+L:	ceph-devel@vger.kernel.org
 W:	http://ceph.newdream.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
 S:	Supported
@@ -1926,17 +1936,17 @@ F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
 DRBD DRIVER
-P:     Philipp Reisner
-P:     Lars Ellenberg
-M:     drbd-dev@lists.linbit.com
-L:     drbd-user@lists.linbit.com
-W:     http://www.drbd.org
-T:     git git://git.drbd.org/linux-2.6-drbd.git drbd
-T:     git git://git.drbd.org/drbd-8.3.git
-S:     Supported
-F:     drivers/block/drbd/
-F:     lib/lru_cache.c
-F:     Documentation/blockdev/drbd/
+P:	Philipp Reisner
+P:	Lars Ellenberg
+M:	drbd-dev@lists.linbit.com
+L:	drbd-user@lists.linbit.com
+W:	http://www.drbd.org
+T:	git git://git.drbd.org/linux-2.6-drbd.git drbd
+T:	git git://git.drbd.org/drbd-8.3.git
+S:	Supported
+F:	drivers/block/drbd/
+F:	lib/lru_cache.c
+F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
@@ -2474,12 +2484,6 @@ L:	linuxppc-dev@ozlabs.org
 S:	Odd Fixes
 F:	drivers/char/hvc_*
 
-VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit.shah@redhat.com>
-L:	virtualization@lists.linux-foundation.org
-S:	Maintained
-F:	drivers/char/virtio_console.c
-
 iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
 M:	Peter Jones <pjones@redhat.com>
 M:	Konrad Rzeszutek Wilk <konrad@kernel.org>
@@ -3083,6 +3087,7 @@ F:	include/scsi/*iscsi*
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
+L:	netdev@vger.kernel.org
 W:	http://www.isdn4linux.de
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
 S:	Maintained
@@ -3269,6 +3274,16 @@ S:	Maintained
 F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
+KEYS/KEYRINGS:
+M:	David Howells <dhowells@redhat.com>
+L:	keyrings@linux-nfs.org
+S:	Maintained
+F:	Documentation/keys.txt
+F:	include/linux/key.h
+F:	include/linux/key-type.h
+F:	include/keys/
+F:	security/keys/
+
 KGDB
 M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net
@@ -3518,8 +3533,8 @@ F:	drivers/scsi/sym53c8xx_2/
 LTP (Linux Test Project)
 M:	Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
 M:	Garrett Cooper <yanegomi@gmail.com>
-M:     Mike Frysinger <vapier@gentoo.org>
-M:     Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Mike Frysinger <vapier@gentoo.org>
+M:	Subrata Modak <subrata@linux.vnet.ibm.com>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
@@ -5423,7 +5438,6 @@ S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TIPC NETWORK LAYER
-M:	Per Liden <per.liden@ericsson.com>
 M:	Jon Maloy <jon.maloy@ericsson.com>
 M:	Allan Stephens <allan.stephens@windriver.com>
 L:	tipc-discussion@lists.sourceforge.net
@@ -5961,6 +5975,13 @@ S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
+VIRTIO CONSOLE DRIVER
+M:	Amit Shah <amit.shah@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/char/virtio_console.c
+F:	include/linux/virtio_console.h
+
 VIRTIO HOST (VHOST)
 M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
@@ -6201,7 +6222,7 @@ F:	arch/x86/
 X86 PLATFORM DRIVERS
 M:	Matthew Garrett <mjg@redhat.com>
 L:	platform-driver-x86@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained
 F:	drivers/platform/x86
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/alpha/boot/bootp.c

@@ -8,6 +8,7 @@
  * based significantly on the arch/alpha/boot/main.c of Linus Torvalds
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>

arch/alpha/boot/bootpz.c

@@ -10,6 +10,7 @@
  * and the decompression code from MILO.
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>

arch/alpha/boot/main.c

@@ -6,6 +6,7 @@
  * This file is the bootloader for the Linux/AXP kernel
  */
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/string.h>
 #include <generated/utsrelease.h>
 #include <linux/mm.h>

arch/alpha/boot/misc.c

@@ -19,6 +19,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 
 #include <asm/uaccess.h>
 

arch/alpha/kernel/irq.c

@@ -18,7 +18,6 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/init.h>
 #include <linux/irq.h>

arch/alpha/kernel/osf_sys.c

@@ -20,7 +20,6 @@
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/utsname.h>
 #include <linux/time.h>
@@ -37,6 +36,7 @@
 #include <linux/uio.h>
 #include <linux/vfs.h>
 #include <linux/rcupdate.h>
+#include <linux/slab.h>
 
 #include <asm/fpu.h>
 #include <asm/io.h>

arch/alpha/kernel/pci-noop.c

@@ -7,6 +7,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
+#include <linux/gfp.h>
 #include <linux/capability.h>
 #include <linux/mm.h>
 #include <linux/errno.h>

arch/alpha/kernel/pci-sysfs.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <linux/pci.h>
 
 static int hose_mmap_page_range(struct pci_controller *hose,

arch/alpha/kernel/pci_iommu.c

@@ -5,7 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
 #include <linux/bootmem.h>
 #include <linux/scatterlist.h>
 #include <linux/log2.h>

arch/alpha/kernel/process.c

@@ -17,7 +17,6 @@
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/time.h>
 #include <linux/major.h>
@@ -28,6 +27,7 @@
 #include <linux/reboot.h>
 #include <linux/tty.h>
 #include <linux/console.h>
+#include <linux/slab.h>
 
 #include <asm/reg.h>
 #include <asm/uaccess.h>

arch/alpha/kernel/ptrace.c

@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
-#include <linux/slab.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 

arch/alpha/kernel/smc37c669.c

@@ -3,7 +3,6 @@
  */
 #include <linux/kernel.h>
 
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/delay.h>

arch/alpha/kernel/smc37c93x.c

@@ -4,7 +4,6 @@
 
 #include <linux/kernel.h>
 
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/delay.h>

arch/alpha/kernel/srm_env.c

@@ -30,6 +30,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gfp.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>

arch/alpha/mm/init.c

@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/bootmem.h> /* max_low_pfn */
 #include <linux/vmalloc.h>
+#include <linux/gfp.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>

arch/arm/boot/compressed/head.S

@@ -172,7 +172,7 @@ not_angel:
 		adr	r0, LC0
  ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
  THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, r11, ip}	)
- THUMB(		ldr	sp, [r0, #28]				)
+ THUMB(		ldr	sp, [r0, #32]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are

arch/arm/common/clkdev.c

@@ -18,6 +18,7 @@
 #include <linux/string.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>

arch/arm/common/it8152.c

@@ -21,7 +21,6 @@
 #include <linux/ptrace.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>

arch/arm/common/locomo.c

@@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state)
 	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
 	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
-	locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+	locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
 	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
 	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
 	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
@@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 	/* Longtime timer */
 	locomo_writel(0, lchip->base + LOCOMO_LTINT);
 	/* SPI */
-	locomo_writel(0, lchip->base + LOCOMO_SPIIE);
+	locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
 
 	locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
 	r = locomo_readl(lchip->base + LOCOMO_ASD);
@@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
-		return;
+		goto out;
 	}
 
 	/* Send Sub address (LSB is channel select) */
@@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
-		return;
+		goto out;
 	}
 
 	/* Send DAC data */
@@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
 	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
 		printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
-		return;
 	}
 
+out:
 	/* stop */
 	r = locomo_readl(mapbase + LOCOMO_DAC);
 	r &=  ~(LOCOMO_DAC_SCLOEB);

arch/arm/include/asm/cacheflush.h

@@ -15,6 +15,7 @@
 #include <asm/glue.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
+#include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
@@ -219,12 +220,6 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(const void *, const void *);
 };
 
-struct outer_cache_fns {
-	void (*inv_range)(unsigned long, unsigned long);
-	void (*clean_range)(unsigned long, unsigned long);
-	void (*flush_range)(unsigned long, unsigned long);
-};
-
 /*
  * Select the calling method
  */
@@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.inv_range)
-		outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.clean_range)
-		outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
-	if (outer_cache.flush_range)
-		outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
 /*
  * Copy user data from/to a page which is mapped into a different
  * processes address space.  Really, we want to allow our "user

arch/arm/include/asm/clkdev.h

@@ -13,6 +13,7 @@
 #define __ASM_CLKDEV_H
 
 struct clk;
+struct device;
 
 struct clk_lookup {
 	struct list_head	node;

arch/arm/include/asm/irq.h

@@ -17,6 +17,7 @@
 
 #ifndef __ASSEMBLY__
 struct irqaction;
+struct pt_regs;
 extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);

arch/arm/include/asm/outercache.h

@@ -0,0 +1,75 @@
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+	void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+	if (outer_cache.sync)
+		outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif	/* __ASM_OUTERCACHE_H */

arch/arm/include/asm/system.h

@@ -60,6 +60,8 @@
 #include <linux/linkage.h>
 #include <linux/irqflags.h>
 
+#include <asm/outercache.h>
+
 #define __exception	__attribute__((section(".exception.text")))
 
 struct thread_info;
@@ -137,10 +139,12 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb()		dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
-#define wmb()		dmb()
+#define wmb()		mb()
 #else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
@@ -152,9 +156,9 @@ extern unsigned int user_debug;
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
 #endif
 
 #define read_barrier_depends()		do { } while(0)

arch/arm/kernel/irq.c

@@ -27,7 +27,6 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/random.h>
 #include <linux/smp.h>
 #include <linux/init.h>

arch/arm/kernel/kprobes.c

@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/slab.h>
 #include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
@@ -393,6 +394,14 @@ void __kprobes jprobe_return(void)
 		/*
 		 * Setup an empty pt_regs. Fill SP and PC fields as
 		 * they're needed by longjmp_break_handler.
+		 *
+		 * We allocate some slack between the original SP and start of
+		 * our fabricated regs. To be precise we want to have worst case
+		 * covered which is STMFD with all 16 regs so we allocate 2 *
+		 * sizeof(struct_pt_regs)).
+		 *
+		 * This is to prevent any simulated instruction from writing
+		 * over the regs when they are accessing the stack.
 		 */
 		"sub    sp, %0, %1		\n\t"
 		"ldr    r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
@@ -410,7 +419,7 @@ void __kprobes jprobe_return(void)
 		"ldmia	sp, {r0 - pc}		\n\t"
 		:
 		: "r" (kcb->jprobe_saved_regs.ARM_sp),
-		  "I" (sizeof(struct pt_regs)),
+		  "I" (sizeof(struct pt_regs) * 2),
 		  "J" (offsetof(struct pt_regs, ARM_sp)),
 		  "J" (offsetof(struct pt_regs, ARM_pc)),
 		  "J" (offsetof(struct pt_regs, ARM_cpsr))

arch/arm/kernel/module.c

@@ -16,9 +16,9 @@
 #include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
-#include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/string.h>
+#include <linux/gfp.h>
 
 #include <asm/pgtable.h>
 #include <asm/sections.h>

arch/arm/kernel/process.c

@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
-#include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>

arch/arm/kernel/sys_arm.c

@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
@@ -27,6 +26,7 @@
 #include <linux/file.h>
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
+#include <linux/slab.h>
 
 /* Fork a new task - this creates a new program thread.
  * This is called indirectly via a small wrapper

arch/arm/lib/memmove.S

@@ -74,7 +74,7 @@ ENTRY(memmove)
 		rsb	ip, ip, #32
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:		W(nop)
 		W(ldr)	r3, [r1, #-4]!
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
@@ -85,7 +85,7 @@ ENTRY(memmove)
 
 		add	pc, pc, ip
 		nop
-		nop
+		W(nop)
 		W(str)	r3, [r0, #-4]!
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!

arch/arm/lib/uaccess_with_memcpy.c

@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/hardirq.h> /* for in_atomic() */
+#include <linux/gfp.h>
 #include <asm/current.h>
 #include <asm/page.h>
 

arch/arm/mach-aaec2000/core.c

@@ -20,6 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 #include <linux/clk.h>
+#include <linux/gfp.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>

arch/arm/mach-at91/pm_slowclock.S

@@ -205,13 +205,25 @@ ENTRY(at91_slow_clock)
 	ldr	r3, .saved_pllbr
 	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+1:
 	wait_pllblock
+2:
 
 	/* Restore PLLA setting */
 	ldr	r3, .saved_pllar
 	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
 
+	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	bne	3f
+	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	beq	4f
+3:
 	wait_pllalock
+4:
 
 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*

arch/arm/mach-bcmring/dma.c

@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <linux/irqreturn.h>
 #include <linux/proc_fs.h>
+#include <linux/slab.h>
 
 #include <mach/timer.h>
 
@@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring);
 int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	      int dirtied	/* non-zero if any of the pages were modified */
     ) {
+
+	int rc = 0;
 	int regionIdx;
 	int segmentIdx;
 	DMA_Region_t *region;
 	DMA_Segment_t *segment;
 
+	down(&memMap->lock);
+
 	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
 		region = &memMap->region[regionIdx];
 
@@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: vmalloc'd pages are not yet supported\n",
 					       __func__);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 
 			case DMA_MEM_TYPE_KMALLOC:
@@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 					printk(KERN_ERR
 					       "%s: Unsupported memory type: %d\n",
 					       __func__, region->memType);
-					return -EINVAL;
+					rc = -EINVAL;
+					goto out;
 				}
 			}
 
@@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
 	memMap->numRegionsUsed = 0;
 	memMap->inUse = 0;
 
+out:
 	up(&memMap->lock);
 
-	return 0;
+	return rc;
 }
 
 EXPORT_SYMBOL(dma_unmap);

arch/arm/mach-davinci/board-dm365-evm.c

@@ -22,6 +22,7 @@
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/slab.h>
 #include <linux/mtd/nand.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>

arch/arm/mach-davinci/dm365.c

@@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_MMCINT]			= 7,
 	[IRQ_DM365_MMCINT1]		= 7,
 	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 4,
 	[IRQ_AEMIFINT]			= 2,
 	[IRQ_DM365_SDIOINT1]		= 2,
 	[IRQ_TINT0_TINT12]		= 7,

arch/arm/mach-davinci/dma.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/edma.h>
 
@@ -1266,7 +1267,8 @@ int edma_start(unsigned channel)
 		/* EDMA channel with event association */
 		pr_debug("EDMA: ER%d %08x\n", j,
 			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending error */
+		/* Clear any pending event or error */
+		edma_write_array(ctlr, EDMA_ECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -3,7 +3,7 @@
  *
  * Author: Mark A. Greer <mgreer@mvista.com>
  *
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
  * the terms of the GNU General Public License version 2. This program
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
@@ -13,7 +13,9 @@
 
 #include <video/da8xx-fb.h>
 
+#include <linux/platform_device.h>
 #include <linux/davinci_emac.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
@@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[];
 extern const short da850_nand_pins[];
 extern const short da850_nor_pins[];
 
+#ifdef CONFIG_DAVINCI_MUX
 int da8xx_pinmux_setup(const short pins[]);
+#else
+static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
+#endif
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */

arch/arm/mach-davinci/time.c

@@ -253,8 +253,6 @@ static void __init timer_init(void)
 			irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
 			setup_irq(irq, &t->irqaction);
 		}
-
-		timer32_config(&timers[i]);
 	}
 }
 
@@ -331,6 +329,7 @@ static void __init davinci_timer_init(void)
 	unsigned int clocksource_id;
 	static char err[] __initdata = KERN_ERR
 		"%s: can't register clocksource!\n";
+	int i;
 
 	clockevent_id = soc_info->timer_info->clockevent_id;
 	clocksource_id = soc_info->timer_info->clocksource_id;
@@ -389,6 +388,9 @@ static void __init davinci_timer_init(void)
 
 	clockevent_davinci.cpumask = cpumask_of(0);
 	clockevents_register_device(&clockevent_davinci);
+
+	for (i=0; i< ARRAY_SIZE(timers); i++)
+		timer32_config(&timers[i]);
 }
 
 struct sys_timer davinci_timer = {

arch/arm/mach-ep93xx/gpio.c

@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 
 /*************************************************************************
- * GPIO handling for EP93xx
+ * Interrupt handling for EP93xx on-chip GPIOs
  *************************************************************************/
 static unsigned char gpio_int_unmasked[3];
 static unsigned char gpio_int_enabled[3];
@@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 };
 static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 };
 
-void ep93xx_gpio_update_int_params(unsigned port)
+static void ep93xx_gpio_update_int_params(unsigned port)
 {
 	BUG_ON(port > 2);
 
@@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port)
 		EP93XX_GPIO_REG(int_en_register_offset[port]));
 }
 
-void ep93xx_gpio_int_mask(unsigned line)
+static inline void ep93xx_gpio_int_mask(unsigned line)
 {
 	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 }

arch/arm/mach-h720x/common.c

@@ -14,7 +14,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/mman.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>

arch/arm/mach-integrator/cpu.c

@@ -13,7 +13,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
-#include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>

arch/arm/mach-integrator/impd1.c

@@ -21,6 +21,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>

arch/arm/mach-integrator/integrator_cp.c

@@ -13,7 +13,6 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
@@ -21,6 +20,7 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>

arch/arm/mach-integrator/pci_v3.c

@@ -22,7 +22,6 @@
  */
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>

arch/arm/mach-iop13xx/pci.c

@@ -18,6 +18,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>

arch/arm/mach-iop32x/glantank.c

@@ -19,7 +19,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-iop32x/iq31244.c

@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-iop32x/iq80321.c

@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-iop32x/n2100.c

@@ -23,7 +23,6 @@
 #include <linux/pci.h>
 #include <linux/pm.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-iop33x/iq80331.c

@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-iop33x/iq80332.c

@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
-#include <linux/slab.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>

arch/arm/mach-ixp2000/enp2611.c

@@ -26,7 +26,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>

arch/arm/mach-ixp2000/ixdp2400.c

@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 

arch/arm/mach-ixp2000/ixdp2800.c

@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 

arch/arm/mach-ixp2000/ixdp2x00.c

@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -23,7 +23,6 @@
 #include <linux/bitops.h>
 #include <linux/pci.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial.h>
 #include <linux/tty.h>

arch/arm/mach-ixp2000/pci.c

@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 

arch/arm/mach-ixp23xx/include/mach/memory.h

@@ -19,7 +19,7 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
 
 #define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
 #define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))

arch/arm/mach-ixp23xx/pci.c

@@ -23,7 +23,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 

arch/arm/mach-ixp4xx/avila-setup.c

@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <asm/types.h>
 #include <asm/setup.h>

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>

arch/arm/mach-ixp4xx/gateway7001-setup.c

@@ -17,7 +17,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -27,7 +27,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -14,7 +14,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/slab.h>
 #include <mach/npe.h>
 
 #define DEBUG_MSG			0

arch/arm/mach-ixp4xx/wg302v2-setup.c

@@ -18,7 +18,6 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>

arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c

@@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
 		.desc		= "SWR Button",
 		.active_low	= 1,
 	}, {
-		.code		= KEY_F1,
+		.code		= KEY_WPS_BUTTON,
 		.gpio		= 46,
-		.desc		= "WPS Button(F1)",
+		.desc		= "WPS Button",
 		.active_low	= 1,
 	},
 };

arch/arm/mach-kirkwood/pcie.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/mbus.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>

arch/arm/mach-lh7a40x/clcd.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/sysdev.h>

arch/arm/mach-mmp/include/mach/uncompress.h

@@ -14,7 +14,7 @@
 #define UART2_BASE	(APB_PHYS_BASE + 0x17000)
 #define UART3_BASE	(APB_PHYS_BASE + 0x18000)
 
-static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+static volatile unsigned long *UART;
 
 static inline void putc(char c)
 {
@@ -37,6 +37,9 @@ static inline void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
+	/* default to UART2 */
+	UART = (unsigned long *)UART2_BASE;
+
 	if (machine_is_avengers_lite())
 		UART = (unsigned long *)UART3_BASE;
 }

arch/arm/mach-mx3/Kconfig

@@ -62,6 +62,15 @@ config MACH_MX31_3DS
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
@@ -95,6 +104,7 @@ config MACH_PCM043
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.

arch/arm/mach-mx3/clock-imx31.c

@@ -468,6 +468,7 @@ static struct clk ahb_clk = {
 	}
 
 DEFINE_CLOCK(perclk_clk,  0, NULL,          0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 DEFINE_CLOCK(sdhc1_clk,   0, MXC_CCM_CGR0,  0, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(sdhc2_clk,   1, MXC_CCM_CGR0,  2, NULL, NULL, &perclk_clk);
@@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk,   0, MXC_CCM_CGR1,  0, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1,  2, mstick1_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1,  4, mstick2_get_rate, NULL, &usb_pll_clk);
 DEFINE_CLOCK1(csi_clk,    0, MXC_CCM_CGR1,  6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rtc_clk,     0, MXC_CCM_CGR1,  8, NULL, NULL, &ckil_clk);
 DEFINE_CLOCK(wdog_clk,    0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(pwm_clk,     0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(usb_clk2,    0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
@@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)

arch/arm/mach-mx3/devices.c

@@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = {
 	.resource = imx_ssi_resources1,
 };
 
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device imx_wdt_device0 = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+	.resource       = imx_wdt_resources,
+};
+
+static int __init mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
 		mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
 		mxc_register_device(&mxc_rnga_device, NULL);
 	}
 	if (cpu_is_mx35()) {
@@ -597,6 +612,8 @@ static int mx3_devices_init(void)
 		imx_ssi_resources0[1].end = MX35_INT_SSI1;
 		imx_ssi_resources1[1].start = MX35_INT_SSI2;
 		imx_ssi_resources1[1].end = MX35_INT_SSI2;
+		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
 	}
 
 	return 0;

arch/arm/mach-mx3/devices.h

@@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;

arch/arm/mach-mx3/mach-armadillo5x0.c

@@ -36,6 +36,9 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -52,6 +55,8 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 #include "crm_regs.h"
@@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
 	/* I2C2 */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	/* OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/* USB host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
 };
 
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	/* Chip already enabled by hardware */
+	/* OTG phy reset*/
+	err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+	if (err) {
+		pr_err("Failed to request the usb otg reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb otg phy\n");
+		goto otg_free_reset;
+	}
+
+	gpio_set_value(OTG_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+	return 0;
+
+otg_free_reset:
+	gpio_free(OTG_RESET);
+	return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+	/* Enable the chip */
+	err = gpio_request(USBH2_CS, "USB-H2-CS");
+	if (err) {
+		pr_err("Failed to request the usb host 2 CS gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+	if (err) {
+		pr_err("Failed to drive the usb host 2 CS gpio\n");
+		goto h2_free_cs;
+	}
+
+	/* H2 phy reset*/
+	err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+	if (err) {
+		pr_err("Failed to request the usb host 2 reset gpio\n");
+		goto h2_free_cs;
+	}
+
+	err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+	if (err) {
+		pr_err("Failed to reset the usb host 2 phy\n");
+		goto h2_free_reset;
+	}
+
+	gpio_set_value(USBH2_RESET, 0/*LOW*/);
+	mdelay(5);
+	gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+	return 0;
+
+h2_free_reset:
+	gpio_free(USBH2_RESET);
+h2_free_cs:
+	gpio_free(USBH2_CS);
+	return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
 /* RTC over I2C*/
 #define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
 
@@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
 	if (armadillo5x0_i2c_rtc.irq == 0)
 		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+	/* USB */
+#if defined(CONFIG_USB_ULPI)
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -23,6 +23,9 @@
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -31,26 +34,96 @@
 #include <asm/memory.h>
 #include <asm/mach/map.h>
 #include <mach/common.h>
-#include <mach/board-mx31pdk.h>
+#include <mach/board-mx31_3ds.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
 #include "devices.h"
 
 /*!
- * @file mx31pdk.c
+ * @file mx31_3ds.c
  *
  * @brief This file contains the board-specific initialization routines.
  *
  * @ingroup System
  */
 
-static int mx31pdk_pins[] = {
+static int mx31_3ds_pins[] = {
 	/* UART1 */
 	MX31_PIN_CTS1__CTS1,
 	MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1,
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+	/* MC13783 IRQ */
+	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+	.constraints = {
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+	{
+		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+		.init_data = &pwgtx_init,
+	}, {
+		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+		.init_data = &pwgtx_init,
+	},
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.regulators = mx31_3ds_regulators,
+	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+	.flags  = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi1_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+	{
+		.modalias	= "mc13783",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 1, /* SS2 */
+		.platform_data	= &mc13783_pdata,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+	.flash_bbt	= 1,
+#endif
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = {
  * LEDs, switches, interrupts for Ethernet.
  */
 
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
 {
 	uint32_t imr_val;
 	uint32_t int_valid;
@@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = {
 	.unmask = expio_unmask_irq,
 };
 
-static int __init mx31pdk_init_expio(void)
+static int __init mx31_3ds_init_expio(void)
 {
 	int i;
 	int ret;
@@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void)
 		return -ENODEV;
 	}
 
-	pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+	pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
 		__raw_readw(CPLD_CODE_VER_REG));
 
 	/*
@@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void)
 		set_irq_flags(i, IRQF_VALID);
 	}
 	set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
-	set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+	set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
 
 	return 0;
 }
@@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void)
 /*
  * This structure defines the MX31 memory map.
  */
-static struct map_desc mx31pdk_io_desc[] __initdata = {
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
 	{
 		.virtual = MX31_CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
@@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = {
 /*
  * Set up static virtual mappings.
  */
-static void __init mx31pdk_map_io(void)
+static void __init mx31_3ds_map_io(void)
 {
 	mx31_map_io();
-	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+	iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
 }
 
 /*!
@@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void)
  */
 static void __init mxc_board_init(void)
 {
-	mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
-				      "mx31pdk");
+	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+				      "mx31_3ds");
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
 
-	if (!mx31pdk_init_expio())
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(mx31_3ds_spi_devs,
+						ARRAY_SIZE(mx31_3ds_spi_devs));
+
+	if (!mx31_3ds_init_expio())
 		platform_device_register(&smsc911x_device);
 }
 
-static void __init mx31pdk_timer_init(void)
+static void __init mx31_3ds_timer_init(void)
 {
 	mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31pdk_timer = {
-	.init	= mx31pdk_timer_init,
+static struct sys_timer mx31_3ds_timer = {
+	.init	= mx31_3ds_timer_init,
 };
 
 /*
  * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
+ * initialize __mach_desc_MX31_3DS data structure.
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io	= MX31_AIPS1_BASE_ADDR,
 	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = MX3x_PHYS_OFFSET + 0x100,
-	.map_io         = mx31pdk_map_io,
+	.map_io         = mx31_3ds_map_io,
 	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
-	.timer          = &mx31pdk_timer,
+	.timer          = &mx31_3ds_timer,
 MACHINE_END

arch/arm/mach-mx3/mach-mx31moboard.c

@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
+#include <linux/gfp.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>

arch/arm/mach-mx3/mach-pcm037.c

@@ -35,7 +35,7 @@
 #include <linux/can/platform/sja1000.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
 
 #include <media/soc_camera.h>