microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
This commit is contained in:
Linus Torvalds 2008-10-11 10:09:45 -07:00
Родитель 5ba2f67afb 69fc7eed5f
Коммит 7cc4e87f91
733 изменённых файлов: 24379 добавлений и 8732 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

12
Documentation/sound/alsa/soc/dapm.txt
Просмотреть файл

@ -135,11 +135,7 @@ when the Mic is inserted:-
static int spitz_mic_bias(struct snd_soc_dapm_widget* w, int event)
{
if(SND_SOC_DAPM_EVENT_ON(event))
set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
else
reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_MIC_BIAS);
gpio_set_value(SPITZ_GPIO_MIC_BIAS, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
@ -269,11 +265,7 @@ powered only when the spk is in use.
/* turn speaker amplifier on/off depending on use */
static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
else
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON);
gpio_set_value(CORGI_GPIO_APM_ON, SND_SOC_DAPM_EVENT_ON(event));
return 0;
}

14
MAINTAINERS
Просмотреть файл

@ -466,6 +466,12 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AFEB9260 MACHINE SUPPORT
P: Sergey Lapin
M: slapin@ossfans.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/AJECO 1ARM MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
@ -491,7 +497,7 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
@ -623,6 +629,12 @@ M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
P: Sergey Lapin
M: slapin@ossfans.org
W: http://hackndev.com
S: Maintained
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au

74
arch/arm/Kconfig
Просмотреть файл

@ -148,7 +148,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
bool
default y
config GENERIC_ISA_DMA
bool
@ -178,6 +177,11 @@ config OPROFILE_MPCORE
config OPROFILE_ARM11_CORE
bool
config OPROFILE_ARMV7
def_bool y
depends on CPU_V7 && !SMP
bool
endif
config VECTORS_BASE
@ -245,6 +249,7 @@ config ARCH_CLPS7500
select TIMER_ACORN
select ISA
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
help
Support for the Cirrus Logic PS7500FE system-on-a-chip.
@ -306,6 +311,7 @@ config ARCH_IOP13XX
select PLAT_IOP
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
help
Support for Intel's IOP13XX (XScale) family of processors.
@ -350,6 +356,7 @@ config ARCH_IXP4XX
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ZONE_DMA if PCI
help
Support for Intel's IXP4XX (XScale) family of processors.
@ -434,7 +441,7 @@ config ARCH_ORION5X
help
Support for the following Marvell Orion 5x series SoCs:
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281).
Orion-2 (5281), Orion-1-90 (6183).
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
@ -464,6 +471,7 @@ config ARCH_RPC
select HAVE_PATA_PLATFORM
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@ -471,9 +479,7 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ISA
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_SPARSEMEM_ENABLE
select ARCH_SELECT_MEMORY_MODEL
select ARCH_MTD_XIP
select GENERIC_GPIO
select GENERIC_TIME
@ -497,6 +503,7 @@ config ARCH_SHARK
bool "Shark"
select ISA
select ISA_DMA
select ZONE_DMA
select PCI
help
Support for the StrongARM based Digital DNARD machine, also known
@ -504,6 +511,8 @@ config ARCH_SHARK
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
@ -515,7 +524,9 @@ config ARCH_DAVINCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
help
Support for TI's DaVinci platform.
@ -734,6 +745,29 @@ config SMP
If you don't know what to do here, say N.
choice
prompt "Memory split"
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
If you are not absolutely sure what you are doing, leave this
option alone!
config VMSPLIT_3G
bool "3G/1G user/kernel split"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
config VMSPLIT_1G
bool "1G/3G user/kernel split"
endchoice
config PAGE_OFFSET
hex
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
default 0xC0000000
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
@ -815,20 +849,18 @@ config ARCH_FLATMEM_HAS_HOLES
default y
depends on FLATMEM
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
bool
default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_SPARSEMEM_ENABLE
bool
config ARCH_SPARSEMEM_DEFAULT
def_bool ARCH_SPARSEMEM_ENABLE
config ARCH_SELECT_MEMORY_MODEL
bool
def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
config NODES_SHIFT
int
@ -845,7 +877,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
ARCH_AT91 || ARCH_DAVINCI || \
ARCH_KS8695 || MACH_RD88F5182
help
If you say Y here, the LEDs on your machine will be used
@ -1005,9 +1037,9 @@ config ATAGS_PROC
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
menu "CPU Power Management"
menu "CPU Frequency scaling"
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
@ -1047,10 +1079,12 @@ config CPU_FREQ_PXA
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
endmenu
endif
source "drivers/cpuidle/Kconfig"
endmenu
menu "Floating point emulation"
comment "At least one emulation must be selected"
@ -1202,6 +1236,8 @@ source "drivers/power/Kconfig"
source "drivers/hwmon/Kconfig"
source "drivers/thermal/Kconfig"
source "drivers/watchdog/Kconfig"
source "drivers/ssb/Kconfig"
@ -1222,6 +1258,10 @@ source "drivers/usb/Kconfig"
source "drivers/mmc/Kconfig"
source "drivers/memstick/Kconfig"
source "drivers/accessibility/Kconfig"
source "drivers/leds/Kconfig"
source "drivers/rtc/Kconfig"
@ -1230,6 +1270,8 @@ source "drivers/dma/Kconfig"
source "drivers/dca/Kconfig"
source "drivers/auxdisplay/Kconfig"
source "drivers/regulator/Kconfig"
source "drivers/uio/Kconfig"

2
arch/arm/Makefile
Просмотреть файл

@ -47,7 +47,7 @@ comma = ,
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7

2
arch/arm/boot/compressed/Makefile
Просмотреть файл

@ -76,7 +76,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS :=
EXTRA_AFLAGS := -Wa,-march=all
# Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
# linker symbols. We only define initrd_phys and params_phys if the

3
arch/arm/boot/compressed/head.S
Просмотреть файл

@ -421,6 +421,7 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
add r1, r1, #1048576
str r1, [r0]
mov pc, lr
ENDPROC(__setup_mmu)
__armv4_mmu_cache_on:
mov r12, lr
@ -801,7 +802,7 @@ loop1:
add r2, r2, #4 @ add 4 (line length offset)
ldr r4, =0x3ff
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
.word 0xe16f5f14 @ clz r5, r4 - find bit position of way size increment
clz r5, r4 @ find bit position of way size increment
ldr r7, =0x7fff
ands r7, r7, r1, lsr #13 @ extract max number of the index size
loop2:

3
arch/arm/common/Kconfig
Просмотреть файл

@ -12,7 +12,8 @@ config ICST307
config SA1111
bool
select DMABOUNCE
select DMABOUNCE if !ARCH_PXA
select ZONE_DMA if !ARCH_PXA
config DMABOUNCE
bool

297
arch/arm/common/dmabounce.c
Просмотреть файл

@ -154,9 +154,7 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
#endif
write_lock_irqsave(&device_info->lock, flags);
list_add(&buf->node, &device_info->safe_buffers);
write_unlock_irqrestore(&device_info->lock, flags);
return buf;
@ -205,8 +203,22 @@ free_safe_buffer(struct dmabounce_device_info *device_info, struct safe_buffer *
/* ************************************************** */
static inline dma_addr_t
map_single(struct device *dev, void *ptr, size_t size,
static struct safe_buffer *find_safe_buffer_dev(struct device *dev,
dma_addr_t dma_addr, const char *where)
{
if (!dev || !dev->archdata.dmabounce)
return NULL;
if (dma_mapping_error(dev, dma_addr)) {
if (dev)
dev_err(dev, "Trying to %s invalid mapping\n", where);
else
pr_err("unknown device: Trying to %s invalid mapping\n", where);
return NULL;
}
return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
}
static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
@ -270,33 +282,21 @@ map_single(struct device *dev, void *ptr, size_t size,
return dma_addr;
}
static inline void
unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
/*
* Trying to unmap an invalid mapping
*/
if (dma_mapping_error(dev, dma_addr)) {
dev_err(dev, "Trying to unmap invalid mapping\n");
return;
}
if (device_info)
buf = find_safe_buffer(device_info, dma_addr);
struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap");
if (buf) {
BUG_ON(buf->size != size);
BUG_ON(buf->direction != dir);
dev_dbg(dev,
"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
DO_STATS(dev->archdata.dmabounce->bounce_count++);
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
void *ptr = buf->ptr;
@ -317,74 +317,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
dmac_clean_range(ptr, ptr + size);
outer_clean_range(__pa(ptr), __pa(ptr) + size);
}
free_safe_buffer(device_info, buf);
}
}
static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
if (device_info)
buf = find_safe_buffer(device_info, dma_addr);
if (buf) {
/*
* Both of these checks from original code need to be
* commented out b/c some drivers rely on the following:
*
* 1) Drivers may map a large chunk of memory into DMA space
* but only sync a small portion of it. Good example is
* allocating a large buffer, mapping it, and then
* breaking it up into small descriptors. No point
* in syncing the whole buffer if you only have to
* touch one descriptor.
*
* 2) Buffers that are mapped as DMA_BIDIRECTIONAL are
* usually only synced in one dir at a time.
*
* See drivers/net/eepro100.c for examples of both cases.
*
* -ds
*
* BUG_ON(buf->size != size);
* BUG_ON(buf->direction != dir);
*/
dev_dbg(dev,
"%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
switch (dir) {
case DMA_FROM_DEVICE:
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
__func__, buf->safe, buf->ptr, size);
memcpy(buf->ptr, buf->safe, size);
break;
case DMA_TO_DEVICE:
dev_dbg(dev,
"%s: copy out unsafe %p to safe %p, size %d\n",
__func__,buf->ptr, buf->safe, size);
memcpy(buf->safe, buf->ptr, size);
break;
case DMA_BIDIRECTIONAL:
BUG(); /* is this allowed? what does it mean? */
default:
BUG();
}
/*
* No need to sync the safe buffer - it was allocated
* via the coherent allocators.
*/
return 0;
} else {
return 1;
free_safe_buffer(dev->archdata.dmabounce, buf);
}
}
@ -396,21 +329,29 @@ static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
* substitute the safe buffer for the unsafe one.
* (basically move the buffer from an unsafe area to a safe one)
*/
dma_addr_t
dma_map_single(struct device *dev, void *ptr, size_t size,
dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
dma_addr_t dma_addr;
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
__func__, ptr, size, dir);
BUG_ON(dir == DMA_NONE);
BUG_ON(!valid_dma_direction(dir));
dma_addr = map_single(dev, ptr, size, dir);
return dma_addr;
return map_single(dev, ptr, size, dir);
}
EXPORT_SYMBOL(dma_map_single);
dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
__func__, page, offset, size, dir);
BUG_ON(!valid_dma_direction(dir));
return map_single(dev, page_address(page) + offset, size, dir);
}
EXPORT_SYMBOL(dma_map_page);
/*
* see if a mapped address was really a "safe" buffer and if so, copy
@ -419,126 +360,76 @@ dma_map_single(struct device *dev, void *ptr, size_t size,
* should be)
*/
void
dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
__func__, (void *) dma_addr, size, dir);
BUG_ON(dir == DMA_NONE);
unmap_single(dev, dma_addr, size, dir);
}
EXPORT_SYMBOL(dma_unmap_single);
int
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
unsigned long off, size_t sz, enum dma_data_direction dir)
{
int i;
struct safe_buffer *buf;
dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
__func__, sg, nents, dir);
dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
__func__, addr, off, sz, dir);
BUG_ON(dir == DMA_NONE);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
return 1;
for (i = 0; i < nents; i++, sg++) {
struct page *page = sg_page(sg);
unsigned int offset = sg->offset;
unsigned int length = sg->length;
void *ptr = page_address(page) + offset;
BUG_ON(buf->direction != dir);
sg->dma_address =
map_single(dev, ptr, length, dir);
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
__func__, buf->safe + off, buf->ptr + off, sz);
memcpy(buf->ptr + off, buf->safe + off, sz);
}
return nents;
return 0;
}
EXPORT_SYMBOL(dmabounce_sync_for_cpu);
void
dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
int dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
unsigned long off, size_t sz, enum dma_data_direction dir)
{
int i;
struct safe_buffer *buf;
dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
__func__, sg, nents, dir);
dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
__func__, addr, off, sz, dir);
BUG_ON(dir == DMA_NONE);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
return 1;
for (i = 0; i < nents; i++, sg++) {
dma_addr_t dma_addr = sg->dma_address;
unsigned int length = sg->length;
BUG_ON(buf->direction != dir);
unmap_single(dev, dma_addr, length, dir);
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
dev_dbg(dev, "%s: copy out unsafe %p to safe %p, size %d\n",
__func__,buf->ptr + off, buf->safe + off, sz);
memcpy(buf->safe + off, buf->ptr + off, sz);
}
return 0;
}
EXPORT_SYMBOL(dmabounce_sync_for_device);
void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
__func__, dma_addr, offset, size, dir);
if (sync_single(dev, dma_addr, offset + size, dir))
dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
__func__, dma_addr, offset, size, dir);
if (sync_single(dev, dma_addr, offset + size, dir))
dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
EXPORT_SYMBOL(dma_sync_single_range_for_device);
void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
int i;
dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
__func__, sg, nents, dir);
BUG_ON(dir == DMA_NONE);
for (i = 0; i < nents; i++, sg++) {
dma_addr_t dma_addr = sg->dma_address;
unsigned int length = sg->length;
sync_single(dev, dma_addr, length, dir);
}
}
void
dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
int i;
dev_dbg(dev, "%s(sg=%p,nents=%d,dir=%x)\n",
__func__, sg, nents, dir);
BUG_ON(dir == DMA_NONE);
for (i = 0; i < nents; i++, sg++) {
dma_addr_t dma_addr = sg->dma_address;
unsigned int length = sg->length;
sync_single(dev, dma_addr, length, dir);
}
}
static int
dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char *name,
unsigned long size)
static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev,
const char *name, unsigned long size)
{
pool->size = size;
DO_STATS(pool->allocs = 0);
@ -549,9 +440,8 @@ dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, const char
return pool->pool ? 0 : -ENOMEM;
}
int
dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
unsigned long large_buffer_size)
int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
unsigned long large_buffer_size)
{
struct dmabounce_device_info *device_info;
int ret;
@ -607,9 +497,9 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
kfree(device_info);
return ret;
}
EXPORT_SYMBOL(dmabounce_register_dev);
void
dmabounce_unregister_dev(struct device *dev)
void dmabounce_unregister_dev(struct device *dev)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
@ -642,15 +532,6 @@ dmabounce_unregister_dev(struct device *dev)
dev_info(dev, "dmabounce: device unregistered\n");
}
EXPORT_SYMBOL(dma_map_single);
EXPORT_SYMBOL(dma_unmap_single);
EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
EXPORT_SYMBOL(dmabounce_unregister_dev);
MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>, Deepak Saxena <dsaxena@plexity.net>");

2
arch/arm/common/gic.c
Просмотреть файл

@ -27,9 +27,9 @@
#include <linux/list.h>
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>

14
arch/arm/common/it8152.c
Просмотреть файл

@ -66,14 +66,6 @@ static void it8152_unmask_irq(unsigned int irq)
}
}
static inline void it8152_irq(int irq)
{
struct irq_desc *desc;
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
static struct irq_chip it8152_irq_chip = {
.name = "it8152",
.ack = it8152_mask_irq,
@ -128,21 +120,21 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
while (bits_pd) {
i = __ffs(bits_pd);
it8152_irq(IT8152_PD_IRQ(i));
generic_handle_irq(IT8152_PD_IRQ(i));
bits_pd &= ~(1 << i);
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
i = __ffs(bits_lp);
it8152_irq(IT8152_LP_IRQ(i));
generic_handle_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
i = __ffs(bits_ld);
it8152_irq(IT8152_LD_IRQ(i));
generic_handle_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
}

28
arch/arm/common/locomo.c
Просмотреть файл

@ -24,9 +24,9 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@ -169,7 +169,6 @@ static struct locomo_dev_info locomo_devices[] = {
static void locomo_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
/* Acknowledge the parent IRQ */
@ -181,10 +180,9 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
/* generate the next interrupt(s) */
irq = LOCOMO_IRQ_START;
d = irq_desc + irq;
for (i = 0; i <= 3; i++, d++, irq++) {
for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0100 << i)) {
desc_handle_irq(irq, d);
generic_handle_irq(irq);
}
}
@ -222,12 +220,10 @@ static struct irq_chip locomo_chip = {
static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
{
struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_KEY_START;
desc_handle_irq(LOCOMO_IRQ_KEY_START, d);
generic_handle_irq(LOCOMO_IRQ_KEY_START);
}
}
@ -268,7 +264,6 @@ static struct irq_chip locomo_key_chip = {
static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_GIR) &
@ -277,10 +272,9 @@ static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
if (req) {
irq = LOCOMO_IRQ_GPIO_START;
d = irq_desc + LOCOMO_IRQ_GPIO_START;
for (i = 0; i <= 15; i++, irq++, d++) {
for (i = 0; i <= 15; i++, irq++) {
if (req & (0x0001 << i)) {
desc_handle_irq(irq, d);
generic_handle_irq(irq);
}
}
}
@ -361,12 +355,10 @@ static struct irq_chip locomo_gpio_chip = {
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
{
struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
d = irq_desc + LOCOMO_IRQ_LT_START;
desc_handle_irq(LOCOMO_IRQ_LT_START, d);
generic_handle_irq(LOCOMO_IRQ_LT_START);
}
}
@ -407,17 +399,15 @@ static struct irq_chip locomo_lt_chip = {
static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
{
int req, i;
struct irq_desc *d;
void __iomem *mapbase = get_irq_chip_data(irq);
req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
if (req) {
irq = LOCOMO_IRQ_SPI_START;
d = irq_desc + irq;
for (i = 0; i <= 3; i++, irq++, d++) {
for (i = 0; i <= 3; i++, irq++) {
if (req & (0x0001 << i)) {
desc_handle_irq(irq, d);
generic_handle_irq(irq);
}
}
}

2
arch/arm/common/sa1111.c
Просмотреть файл

@ -25,10 +25,10 @@
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/sizes.h>

2
arch/arm/common/scoop.c
Просмотреть файл

@ -15,7 +15,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <asm/hardware/scoop.h>

2
arch/arm/common/sharpsl_param.c
Просмотреть файл

@ -12,6 +12,7 @@
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/mach/sharpsl_param.h>
@ -36,6 +37,7 @@
#define PHAD_MAGIC MAGIC_CHG('P','H','A','D')
struct sharpsl_param_info sharpsl_param;
EXPORT_SYMBOL(sharpsl_param);
void sharpsl_save_param(void)
{

2
arch/arm/common/time-acorn.c
Просмотреть файл

@ -17,9 +17,9 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/hardware/ioc.h>
#include <asm/mach/time.h>

2
arch/arm/common/uengine.c
Просмотреть файл

@ -16,9 +16,9 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/hardware/uengine.h>
#include <asm/io.h>
#if defined(CONFIG_ARCH_IXP2000)
#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE

2
arch/arm/common/via82c505.c
Просмотреть файл

@ -4,8 +4,8 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach/pci.h>

2
arch/arm/common/vic.c
Просмотреть файл

@ -20,8 +20,8 @@
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>

1259
arch/arm/configs/afeb9260_defconfig Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

1
arch/arm/configs/at91sam9rlek_defconfig
Просмотреть файл

@ -496,6 +496,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_INPUT_MISC is not set

1466
arch/arm/configs/cm_x300_defconfig Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

1121
arch/arm/configs/jornada720_defconfig
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

3
arch/arm/configs/orion5x_defconfig
Просмотреть файл

@ -176,14 +176,17 @@ CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
CONFIG_MACH_WRT350N_V2=y
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
CONFIG_MACH_EDMINI_V2=y
CONFIG_MACH_MSS2=y
CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
#
# Boot options

951
arch/arm/configs/palmz72_defconfig Normal file
Просмотреть файл

@ -0,0 +1,951 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc4
# Sun Aug 24 02:29:27 2008
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_MACH_TRIZEPS4 is not set
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_PCM027 is not set
CONFIG_ARCH_PXA_PALM=y
# CONFIG_MACH_PALMTX is not set
CONFIG_MACH_PALMZ72=y
# CONFIG_PXA_EZX is not set
CONFIG_PXA27x=y
CONFIG_PXA_PWM=y
#
# Boot options
#
#
# Power management
#
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_PXA27x=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_PXA is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_PXA2XX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
# CONFIG_APM_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_SMARTPANEL is not set
# CONFIG_FB_PXA_PARAMETERS is not set
# CONFIG_FB_MBX is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_AM200EPD is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
CONFIG_BACKLIGHT_PWM=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=866
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_FRAME_POINTER=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_DEBUG_USER=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

1678
arch/arm/configs/viper_defconfig Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

237
arch/arm/configs/xm_x270_defconfig → arch/arm/configs/xm_x2xx_defconfig
Просмотреть файл

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25
# Sun May 11 15:12:52 2008
# Linux kernel version: 2.6.27-rc8
# Sun Oct 5 11:05:36 2008
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -12,6 +12,7 @@ CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
@ -24,6 +25,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@ -62,7 +64,6 @@ CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@ -88,14 +89,21 @@ CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@ -106,6 +114,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@ -131,7 +140,6 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
@ -145,8 +153,11 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
@ -164,26 +175,32 @@ CONFIG_DMABOUNCE=y
#
# Intel PXA2xx/PXA3xx Implementations
#
#
# Select target boards
#
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_MACH_TRIZEPS4 is not set
# CONFIG_TRIZEPS_PXA is not set
CONFIG_MACH_EM_X270=y
# CONFIG_MACH_COLIBRI is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
# CONFIG_MACH_TAVOREVB is not set
# CONFIG_MACH_SAAR is not set
CONFIG_MACH_ARMCORE=y
# CONFIG_MACH_CM_X300 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_PXA_EZX is not set
CONFIG_PXA25x=y
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
# CONFIG_PXA_PWM is not set
#
@ -253,11 +270,17 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@ -284,9 +307,10 @@ CONFIG_CMDLINE="root=1f03 mem=32M"
# CONFIG_KEXEC is not set
#
# CPU Frequency scaling
# CPU Power Management
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@ -316,10 +340,6 @@ CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# Networking
#
CONFIG_NET=y
#
@ -402,6 +422,7 @@ CONFIG_BT_HIDP=m
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
@ -419,6 +440,7 @@ CONFIG_BT_HCIUSB_SCO=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
@ -435,6 +457,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@ -527,6 +551,7 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_H1900 is not set
CONFIG_MTD_NAND_GPIO=m
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_SHARPSL is not set
@ -636,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set
@ -696,17 +722,21 @@ CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -725,6 +755,7 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=1
# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@ -780,7 +811,6 @@ CONFIG_LIBERTAS_SDIO=m
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
@ -853,17 +883,18 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
# CONFIG_TOUCHSCREEN_WM9713 is not set
# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_INPUT_MISC is not set
#
@ -880,6 +911,7 @@ CONFIG_SERIO_LIBPS2=y
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@ -922,45 +954,66 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
@ -970,25 +1023,31 @@ CONFIG_I2C_PXA=y
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_HAVE_GPIO_LIB=y
#
# GPIO Support
#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
#
# SPI GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
@ -1000,10 +1059,16 @@ CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
@ -1014,6 +1079,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
@ -1038,7 +1104,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@ -1071,12 +1136,14 @@ CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
CONFIG_FB_PXA=y
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
CONFIG_FB_MBX=m
# CONFIG_FB_AM200EPD is not set
# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@ -1099,15 +1166,7 @@ CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
@ -1121,19 +1180,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
@ -1193,42 +1248,16 @@ CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# ALSA ARM devices
#
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_PCM=m
CONFIG_SND_PXA2XX_AC97=m
#
# USB devices
#
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# PCMCIA devices
#
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
@ -1261,12 +1290,15 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@ -1274,12 +1306,14 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@ -1309,7 +1343,6 @@ CONFIG_USB_STORAGE=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
# USB port drivers
@ -1322,7 +1355,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@ -1338,6 +1370,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
@ -1349,6 +1382,7 @@ CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
@ -1356,14 +1390,19 @@ CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_CM_X270=y
# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
@ -1401,6 +1440,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
@ -1422,6 +1462,15 @@ CONFIG_RTC_DRV_V3020=y
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SA1100=y
# CONFIG_DMADEVICES is not set
#
# Voltage and Current regulators
#
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
#
@ -1501,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
@ -1511,13 +1561,12 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@ -1626,6 +1675,7 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
@ -1633,7 +1683,17 @@ CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@ -1689,6 +1749,10 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@ -1729,6 +1793,7 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set

2
arch/arm/include/asm/bug.h
Просмотреть файл

@ -12,7 +12,7 @@ extern void __bug(const char *file, int line) __attribute__((noreturn));
#else
/* this just causes an oops */
#define BUG() (*(int *)0 = 0)
#define BUG() do { *(int *)0 = 0; } while (1)
#endif

90
arch/arm/include/asm/cacheflush.h
Просмотреть файл

@ -444,94 +444,4 @@ static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
dmac_inv_range(start, start + size);
}
#define __cacheid_present(val) (val != read_cpuid(CPUID_ID))
#define __cacheid_type_v7(val) ((val & (7 << 29)) == (4 << 29))
#define __cacheid_vivt_prev7(val) ((val & (15 << 25)) != (14 << 25))
#define __cacheid_vipt_prev7(val) ((val & (15 << 25)) == (14 << 25))
#define __cacheid_vipt_nonaliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25))
#define __cacheid_vipt_aliasing_prev7(val) ((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
#define __cacheid_vivt(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
#define __cacheid_vipt(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
#define __cacheid_vipt_nonaliasing(val) (__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
#define __cacheid_vipt_aliasing(val) (__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
#define __cacheid_vivt_asid_tagged_instr(val) (__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
/*
* VIVT caches only
*/
#define cache_is_vivt() 1
#define cache_is_vipt() 0
#define cache_is_vipt_nonaliasing() 0
#define cache_is_vipt_aliasing() 0
#define icache_is_vivt_asid_tagged() 0
#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
/*
* VIPT caches only
*/
#define cache_is_vivt() 0
#define cache_is_vipt() 1
#define cache_is_vipt_nonaliasing() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_vipt_nonaliasing(__val); \
})
#define cache_is_vipt_aliasing() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_vipt_aliasing(__val); \
})
#define icache_is_vivt_asid_tagged() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_vivt_asid_tagged_instr(__val); \
})
#else
/*
* VIVT or VIPT caches. Note that this is unreliable since ARM926
* and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
* There's no way to tell from the CacheType register what type (!)
* the cache is.
*/
#define cache_is_vivt() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
(!__cacheid_present(__val)) || __cacheid_vivt(__val); \
})
#define cache_is_vipt() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_present(__val) && __cacheid_vipt(__val); \
})
#define cache_is_vipt_nonaliasing() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_present(__val) && \
__cacheid_vipt_nonaliasing(__val); \
})
#define cache_is_vipt_aliasing() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_present(__val) && \
__cacheid_vipt_aliasing(__val); \
})
#define icache_is_vivt_asid_tagged() \
({ \
unsigned int __val = read_cpuid(CPUID_CACHETYPE); \
__cacheid_present(__val) && \
__cacheid_vivt_asid_tagged_instr(__val); \
})
#endif
#endif

52
arch/arm/include/asm/cachetype.h Normal file
Просмотреть файл

@ -0,0 +1,52 @@
#ifndef __ASM_ARM_CACHETYPE_H
#define __ASM_ARM_CACHETYPE_H
#define CACHEID_VIVT (1 << 0)
#define CACHEID_VIPT_NONALIASING (1 << 1)
#define CACHEID_VIPT_ALIASING (1 << 2)
#define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
#define CACHEID_ASID_TAGGED (1 << 3)
extern unsigned int cacheid;
#define cache_is_vivt() cacheid_is(CACHEID_VIVT)
#define cache_is_vipt() cacheid_is(CACHEID_VIPT)
#define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING)
#define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING)
#define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED)
/*
* __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
* Mask out support which will never be present on newer CPUs.
* - v6+ is never VIVT
* - v7+ VIPT never aliases
*/
#if __LINUX_ARM_ARCH__ >= 7
#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
#elif __LINUX_ARM_ARCH__ >= 6
#define __CACHEID_ARCH_MIN (~CACHEID_VIVT)
#else
#define __CACHEID_ARCH_MIN (~0)
#endif
/*
* Mask out support which isn't configured
*/
#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
#define __CACHEID_ALWAYS (CACHEID_VIVT)
#define __CACHEID_NEVER (~CACHEID_VIVT)
#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
#define __CACHEID_ALWAYS (0)
#define __CACHEID_NEVER (CACHEID_VIVT)
#else
#define __CACHEID_ALWAYS (0)
#define __CACHEID_NEVER (0)
#endif
static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask)
{
return (__CACHEID_ALWAYS & mask) |
(~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid);
}
#endif

64
arch/arm/include/asm/cputype.h Normal file
Просмотреть файл

@ -0,0 +1,64 @@
#ifndef __ASM_ARM_CPUTYPE_H
#define __ASM_ARM_CPUTYPE_H
#include <linux/stringify.h>
#define CPUID_ID 0
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
unsigned int __val; \
asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
: "=r" (__val) \
: \
: "cc"); \
__val; \
})
#else
extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
#endif
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
* rather than directly reading processor_id or read_cpuid() directly.
*/
static inline unsigned int __attribute_const__ read_cpuid_id(void)
{
return read_cpuid(CPUID_ID);
}
static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
{
return read_cpuid(CPUID_CACHETYPE);
}
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
* this reason, we need a way to explicitly test for this type of CPU.
*/
#ifndef CONFIG_CPU_XSC3
#define cpu_is_xsc3() 0
#else
static inline int cpu_is_xsc3(void)
{
if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
return 1;
return 0;
}
#endif
#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
#define cpu_is_xscale() 0
#else
#define cpu_is_xscale() 1
#endif
#endif

474
arch/arm/include/asm/dma-mapping.h
Просмотреть файл

@ -104,15 +104,14 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
* Dummy noncoherent implementation. We don't provide a dma_cache_sync
* function so drivers using this API are highlighted with build warnings.
*/
static inline void *
dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t gfp)
{
return NULL;
}
static inline void
dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle)
static inline void dma_free_noncoherent(struct device *dev, size_t size,
void *cpu_addr, dma_addr_t handle)
{
}
@ -127,8 +126,7 @@ dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
* return the CPU-viewed address, and sets @handle to be the
* device-viewed address.
*/
extern void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
/**
* dma_free_coherent - free memory allocated by dma_alloc_coherent
@ -143,9 +141,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
* References to memory and mappings associated with cpu_addr/handle
* during and after this call executing are illegal.
*/
extern void
dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t handle);
extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
/**
* dma_mmap_coherent - map a coherent DMA allocation into user space
@ -159,8 +155,8 @@ dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
* into user space. The coherent DMA buffer must not be freed by the
* driver until the user space mapping has been released.
*/
int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t handle, size_t size);
int dma_mmap_coherent(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
/**
@ -174,282 +170,16 @@ int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
* return the CPU-viewed address, and sets @handle to be the
* device-viewed address.
*/
extern void *
dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
extern void *dma_alloc_writecombine(struct device *, size_t, dma_addr_t *,
gfp_t);
#define dma_free_writecombine(dev,size,cpu_addr,handle) \
dma_free_coherent(dev,size,cpu_addr,handle)
int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t handle, size_t size);
int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
/**
* dma_map_single - map a single buffer for streaming DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @cpu_addr: CPU direct mapped address of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Ensure that any data held in the cache is appropriately discarded
* or written back.
*
* The device owns this memory once this call has completed. The CPU
* can regain ownership by calling dma_unmap_single() or
* dma_sync_single_for_cpu().
*/
#ifndef CONFIG_DMABOUNCE
static inline dma_addr_t
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction dir)
{
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
#else
extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
#endif
/**
* dma_map_page - map a portion of a page for streaming DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @page: page that buffer resides in
* @offset: offset into page for start of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Ensure that any data held in the cache is appropriately discarded
* or written back.
*
* The device owns this memory once this call has completed. The CPU
* can regain ownership by calling dma_unmap_page() or
* dma_sync_single_for_cpu().
*/
static inline dma_addr_t
dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
return dma_map_single(dev, page_address(page) + offset, size, dir);
}
/**
* dma_unmap_single - unmap a single buffer previously mapped
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Unmap a single streaming mode DMA translation. The handle and size
* must match what was provided in the previous dma_map_single() call.
* All other usages are undefined.
*
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
/* nothing to do */
}
#else
extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
#endif
/**
* dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Unmap a single streaming mode DMA translation. The handle and size
* must match what was provided in the previous dma_map_single() call.
* All other usages are undefined.
*
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
static inline void
dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
dma_unmap_single(dev, handle, size, dir);
}
/**
* dma_map_sg - map a set of SG buffers for streaming mode DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @sg: list of buffers
* @nents: number of buffers to map
* @dir: DMA transfer direction
*
* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scatter-gather version of the
* above dma_map_single interface. Here the scatter gather list
* elements are each tagged with the appropriate dma address
* and length. They are obtained via sg_dma_{address,length}(SG).
*
* NOTE: An implementation may be able to use a smaller number of
* DMA address/length pairs than there are SG table elements.
* (for example via virtual mapping capabilities)
* The routine returns the number of addr/length pairs actually
* used, at most nents.
*
* Device ownership issues as mentioned above for dma_map_single are
* the same here.
*/
#ifndef CONFIG_DMABOUNCE
static inline int
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
int i;
for (i = 0; i < nents; i++, sg++) {
char *virt;
sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
virt = sg_virt(sg);
if (!arch_is_coherent())
dma_cache_maint(virt, sg->length, dir);
}
return nents;
}
#else
extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
#endif
/**
* dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @sg: list of buffers
* @nents: number of buffers to map
* @dir: DMA transfer direction
*
* Unmap a set of streaming mode DMA translations.
* Again, CPU read rules concerning calls here are the same as for
* dma_unmap_single() above.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
/* nothing to do */
}
#else
extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
#endif
/**
* dma_sync_single_range_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @offset: offset of region to start sync
* @size: size of region to sync
* @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Make physical memory consistent for a single streaming mode DMA
* translation after a transfer.
*
* If you perform a dma_map_single() but wish to interrogate the
* buffer using the cpu, yet do not wish to teardown the PCI dma
* mapping, you must call this function before doing so. At the
* next point you give the PCI dma address back to the card, you
* must first the perform a dma_sync_for_device, and then the
* device again owns the buffer.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
if (!arch_is_coherent())
dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void
dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
if (!arch_is_coherent())
dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
#else
extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
#endif
static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
dma_sync_single_range_for_device(dev, handle, 0, size, dir);
}
/**
* dma_sync_sg_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @sg: list of buffers
* @nents: number of buffers to map
* @dir: DMA transfer direction
*
* Make physical memory consistent for a set of streaming
* mode DMA translations after a transfer.
*
* The same as dma_sync_single_for_* but for a scatter-gather list,
* same rules and usage.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
int i;
for (i = 0; i < nents; i++, sg++) {
char *virt = sg_virt(sg);
if (!arch_is_coherent())
dma_cache_maint(virt, sg->length, dir);
}
}
static inline void
dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
int i;
for (i = 0; i < nents; i++, sg++) {
char *virt = sg_virt(sg);
if (!arch_is_coherent())
dma_cache_maint(virt, sg->length, dir);
}
}
#else
extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
#endif
#ifdef CONFIG_DMABOUNCE
/*
* For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
@ -475,7 +205,8 @@ extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enu
* appropriate DMA pools for the device.
*
*/
extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
extern int dmabounce_register_dev(struct device *, unsigned long,
unsigned long);
/**
* dmabounce_unregister_dev
@ -506,7 +237,184 @@ extern void dmabounce_unregister_dev(struct device *);
*
*/
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.
*/
extern dma_addr_t dma_map_single(struct device *, void *, size_t,
enum dma_data_direction);
extern dma_addr_t dma_map_page(struct device *, struct page *,
unsigned long, size_t, enum dma_data_direction);
extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
enum dma_data_direction);
/*
* Private functions
*/
int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long,
size_t, enum dma_data_direction);
int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long,
size_t, enum dma_data_direction);
#else
#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir) (1)
#define dmabounce_sync_for_device(dev,dma,off,sz,dir) (1)
/**
* dma_map_single - map a single buffer for streaming DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @cpu_addr: CPU direct mapped address of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Ensure that any data held in the cache is appropriately discarded
* or written back.
*
* The device owns this memory once this call has completed. The CPU
* can regain ownership by calling dma_unmap_single() or
* dma_sync_single_for_cpu().
*/
static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
size_t size, enum dma_data_direction dir)
{
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
return virt_to_dma(dev, cpu_addr);
}
/**
* dma_map_page - map a portion of a page for streaming DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @page: page that buffer resides in
* @offset: offset into page for start of buffer
* @size: size of buffer to map
* @dir: DMA transfer direction
*
* Ensure that any data held in the cache is appropriately discarded
* or written back.
*
* The device owns this memory once this call has completed. The CPU
* can regain ownership by calling dma_unmap_page().
*/
static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
BUG_ON(!valid_dma_direction(dir));
if (!arch_is_coherent())
dma_cache_maint(page_address(page) + offset, size, dir);
return page_to_dma(dev, page) + offset;
}
/**
* dma_unmap_single - unmap a single buffer previously mapped
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @size: size of buffer (same as passed to dma_map_single)
* @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Unmap a single streaming mode DMA translation. The handle and size
* must match what was provided in the previous dma_map_single() call.
* All other usages are undefined.
*
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
/* nothing to do */
}
#endif /* CONFIG_DMABOUNCE */
/**
* dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @size: size of buffer (same as passed to dma_map_page)
* @dir: DMA transfer direction (same as passed to dma_map_page)
*
* Unmap a page streaming mode DMA translation. The handle and size
* must match what was provided in the previous dma_map_page() call.
* All other usages are undefined.
*
* After this call, reads by the CPU to the buffer are guaranteed to see
* whatever the device wrote there.
*/
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
dma_unmap_single(dev, handle, size, dir);
}
/**
* dma_sync_single_range_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
* @offset: offset of region to start sync
* @size: size of region to sync
* @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Make physical memory consistent for a single streaming mode DMA
* translation after a transfer.
*
* If you perform a dma_map_single() but wish to interrogate the
* buffer using the cpu, yet do not wish to teardown the PCI dma
* mapping, you must call this function before doing so. At the
* next point you give the PCI dma address back to the card, you
* must first the perform a dma_sync_for_device, and then the
* device again owns the buffer.
*/
static inline void dma_sync_single_range_for_cpu(struct device *dev,
dma_addr_t handle, unsigned long offset, size_t size,
enum dma_data_direction dir)
{
BUG_ON(!valid_dma_direction(dir));
dmabounce_sync_for_cpu(dev, handle, offset, size, dir);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
dma_addr_t handle, unsigned long offset, size_t size,
enum dma_data_direction dir)
{
BUG_ON(!valid_dma_direction(dir));
if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
return;
if (!arch_is_coherent())
dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void dma_sync_single_for_cpu(struct device *dev,
dma_addr_t handle, size_t size, enum dma_data_direction dir)
{
dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
}
static inline void dma_sync_single_for_device(struct device *dev,
dma_addr_t handle, size_t size, enum dma_data_direction dir)
{
dma_sync_single_range_for_device(dev, handle, 0, size, dir);
}
/*
* The scatter list versions of the above methods.
*/
extern int dma_map_sg(struct device *, struct scatterlist *, int,
enum dma_data_direction);
extern void dma_unmap_sg(struct device *, struct scatterlist *, int,
enum dma_data_direction);
extern void dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int,
enum dma_data_direction);
extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
enum dma_data_direction);
#endif /* __KERNEL__ */
#endif

72
arch/arm/include/asm/elf.h
Просмотреть файл

@ -3,7 +3,6 @@
#include <asm/hwcap.h>
#ifndef __ASSEMBLY__
/*
* ELF register definitions..
*/
@ -17,12 +16,34 @@ typedef unsigned long elf_freg_t[3];
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_fp elf_fpregset_t;
#endif
#define EM_ARM 40
#define EF_ARM_APCS26 0x08
#define EF_ARM_SOFT_FLOAT 0x200
#define EF_ARM_EABI_MASK 0xFF000000
#define EF_ARM_EABI_MASK 0xff000000
#define EF_ARM_EABI_UNKNOWN 0x00000000
#define EF_ARM_EABI_VER1 0x01000000
#define EF_ARM_EABI_VER2 0x02000000
#define EF_ARM_EABI_VER3 0x03000000
#define EF_ARM_EABI_VER4 0x04000000
#define EF_ARM_EABI_VER5 0x05000000
#define EF_ARM_BE8 0x00800000 /* ABI 4,5 */
#define EF_ARM_LE8 0x00400000 /* ABI 4,5 */
#define EF_ARM_MAVERICK_FLOAT 0x00000800 /* ABI 0 */
#define EF_ARM_VFP_FLOAT 0x00000400 /* ABI 0 */
#define EF_ARM_SOFT_FLOAT 0x00000200 /* ABI 0 */
#define EF_ARM_OLD_ABI 0x00000100 /* ABI 0 */
#define EF_ARM_NEW_ABI 0x00000080 /* ABI 0 */
#define EF_ARM_ALIGN8 0x00000040 /* ABI 0 */
#define EF_ARM_PIC 0x00000020 /* ABI 0 */
#define EF_ARM_MAPSYMSFIRST 0x00000010 /* ABI 2 */
#define EF_ARM_APCS_FLOAT 0x00000010 /* ABI 0, floats in fp regs */
#define EF_ARM_DYNSYMSUSESEGIDX 0x00000008 /* ABI 2 */
#define EF_ARM_APCS_26 0x00000008 /* ABI 0 */
#define EF_ARM_SYMSARESORTED 0x00000004 /* ABI 1,2 */
#define EF_ARM_INTERWORK 0x00000004 /* ABI 0 */
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
#define R_ARM_NONE 0
#define R_ARM_PC24 1
@ -41,7 +62,6 @@ typedef struct user_fp elf_fpregset_t;
#endif
#define ELF_ARCH EM_ARM
#ifndef __ASSEMBLY__
/*
* This yields a string that ld.so will use to load implementation
* specific libraries for optimization. This is more specific in
@ -59,25 +79,17 @@ typedef struct user_fp elf_fpregset_t;
#define ELF_PLATFORM (elf_platform)
extern char elf_platform[];
#endif
struct elf32_hdr;
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
extern int elf_check_arch(const struct elf32_hdr *);
#define elf_check_arch elf_check_arch
/*
* 32-bit code is always OK. Some cpus can do 26-bit, some can't.
*/
#define ELF_PROC_OK(x) (ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
#define ELF_THUMB_OK(x) \
((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
((x)->e_entry & 3) == 0)
#define ELF_26BIT_OK(x) \
((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
((x)->e_flags & EF_ARM_APCS26) == 0)
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
@ -94,23 +106,7 @@ extern char elf_platform[];
have no such handler. */
#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
#define SET_PERSONALITY(ex, ibcs2) \
do { \
if ((ex).e_flags & EF_ARM_APCS26) { \
set_personality(PER_LINUX); \
} else { \
set_personality(PER_LINUX_32BIT); \
if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
set_thread_flag(TIF_USING_IWMMXT); \
else \
clear_thread_flag(TIF_USING_IWMMXT); \
} \
} while (0)
extern void elf_set_personality(const struct elf32_hdr *);
#define SET_PERSONALITY(ex, ibcs2) elf_set_personality(&(ex))
#endif

124
arch/arm/include/asm/futex.h
Просмотреть файл

@ -1,6 +1,124 @@
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#ifndef _ASM_ARM_FUTEX_H
#define _ASM_ARM_FUTEX_H
#ifdef __KERNEL__
#ifdef CONFIG_SMP
#include <asm-generic/futex.h>
#endif
#else /* !SMP, we can work around lack of atomic ops by disabling preemption */
#include <linux/futex.h>
#include <linux/preempt.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile__( \
"1: ldrt %1, [%2]\n" \
" " insn "\n" \
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
" .section __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
" .previous\n" \
" .section .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
" .previous" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
static inline int
futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
int oldval = 0, ret;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
pagefault_disable(); /* implies preempt_disable() */
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
__futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
__futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg);
break;
case FUTEX_OP_XOR:
__futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
}
pagefault_enable(); /* subsumes preempt_enable() */
if (!ret) {
switch (cmp) {
case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
default: ret = -ENOSYS;
}
}
return ret;
}
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
int val;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
pagefault_disable(); /* implies preempt_disable() */
__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
"1: ldrt %0, [%3]\n"
" teq %0, %1\n"
"2: streqt %2, [%3]\n"
"3:\n"
" .section __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
" .previous\n"
" .section .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
" .previous"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");
pagefault_enable(); /* subsumes preempt_enable() */
return val;
}
#endif /* !SMP */
#endif /* __KERNEL__ */
#endif /* _ASM_ARM_FUTEX_H */

5
arch/arm/include/asm/io.h
Просмотреть файл

@ -60,10 +60,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
#define MT_DEVICE 0
#define MT_DEVICE_NONSHARED 1
#define MT_DEVICE_CACHED 2
#define MT_DEVICE_IXP2000 3
#define MT_DEVICE_WC 4
#define MT_DEVICE_WC 3
/*
* types 5 onwards can be found in asm/mach/map.h and are undefined
* types 4 onwards can be found in asm/mach/map.h and are undefined
* for ioremap
*/

4
arch/arm/include/asm/irq.h
Просмотреть файл

@ -22,6 +22,10 @@
#ifndef __ASSEMBLY__
struct irqaction;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
void init_IRQ(void);
#endif
#endif

1
arch/arm/include/asm/kprobes.h
Просмотреть файл

@ -61,7 +61,6 @@ struct kprobe_ctlblk {
void arch_remove_kprobe(struct kprobe *);
void kretprobe_trampoline(void);
int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);

17
arch/arm/include/asm/mach/map.h
Просмотреть файл

@ -18,16 +18,13 @@ struct map_desc {
unsigned int type;
};
/* types 0-4 are defined in asm/io.h */
#define MT_CACHECLEAN 5
#define MT_MINICLEAN 6
#define MT_LOW_VECTORS 7
#define MT_HIGH_VECTORS 8
#define MT_MEMORY 9
#define MT_ROM 10
#define MT_NONSHARED_DEVICE MT_DEVICE_NONSHARED
#define MT_IXP2000_DEVICE MT_DEVICE_IXP2000
/* types 0-3 are defined in asm/io.h */
#define MT_CACHECLEAN 4
#define MT_MINICLEAN 5
#define MT_LOW_VECTORS 6
#define MT_HIGH_VECTORS 7
#define MT_MEMORY 8
#define MT_ROM 9
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);

3
arch/arm/include/asm/mach/udc_pxa2xx.h
Просмотреть файл

@ -18,8 +18,7 @@ struct pxa2xx_udc_mach_info {
/* Boards following the design guidelines in the developer's manual,
* with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
* here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
* Note that sometimes the signals go through inverters...
* here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */

2
arch/arm/include/asm/mc146818rtc.h
Просмотреть файл

@ -4,8 +4,8 @@
#ifndef _ASM_MC146818RTC_H
#define _ASM_MC146818RTC_H
#include <linux/io.h>
#include <mach/irqs.h>
#include <asm/io.h>
#ifndef RTC_PORT
#define RTC_PORT(x) (0x70 + (x))

40
arch/arm/include/asm/memory.h
Просмотреть файл

@ -13,43 +13,33 @@
#ifndef __ASM_ARM_MEMORY_H
#define __ASM_ARM_MEMORY_H
#include <linux/compiler.h>
#include <linux/const.h>
#include <mach/memory.h>
#include <asm/sizes.h>
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
*/
#ifndef __ASSEMBLY__
#define UL(x) (x##UL)
#else
#define UL(x) (x)
#endif
#include <linux/compiler.h>
#include <mach/memory.h>
#include <asm/sizes.h>
#define UL(x) _AC(x, UL)
#ifdef CONFIG_MMU
#ifndef TASK_SIZE
/*
* PAGE_OFFSET - the virtual address of the start of the kernel image
* TASK_SIZE - the maximum size of a user space task.
* TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
*/
#define TASK_SIZE UL(0xbf000000)
#define TASK_UNMAPPED_BASE UL(0x40000000)
#endif
#define PAGE_OFFSET UL(CONFIG_PAGE_OFFSET)
#define TASK_SIZE (UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
#define TASK_UNMAPPED_BASE (UL(CONFIG_PAGE_OFFSET) / 3)
/*
* The maximum size of a 26-bit user space task.
*/
#define TASK_SIZE_26 UL(0x04000000)
/*
* Page offset: 3GB
*/
#ifndef PAGE_OFFSET
#define PAGE_OFFSET UL(0xc0000000)
#endif
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
@ -147,16 +137,10 @@
#ifndef arch_adjust_zones
#define arch_adjust_zones(node,size,holes) do { } while (0)
#elif !defined(CONFIG_ZONE_DMA)
#error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
#endif
/*
* Amount of memory reserved for the vmalloc() area, and minimum
* address for vmalloc mappings.
*/
extern unsigned long vmalloc_reserve;
#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.

1
arch/arm/include/asm/mmu_context.h
Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/compiler.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
#include <asm-generic/mm_hooks.h>

5
arch/arm/include/asm/page.h
Просмотреть файл

@ -184,8 +184,9 @@ typedef struct page *pgtable_t;
#endif /* !__ASSEMBLY__ */
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#define VM_DATA_DEFAULT_FLAGS \
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
/*
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.

86
arch/arm/include/asm/pgtable.h
Просмотреть файл

@ -164,14 +164,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
#define L_PTE_PRESENT (1 << 0)
#define L_PTE_FILE (1 << 1) /* only when !PRESENT */
#define L_PTE_YOUNG (1 << 1)
#define L_PTE_BUFFERABLE (1 << 2) /* matches PTE */
#define L_PTE_CACHEABLE (1 << 3) /* matches PTE */
#define L_PTE_USER (1 << 4)
#define L_PTE_WRITE (1 << 5)
#define L_PTE_EXEC (1 << 6)
#define L_PTE_DIRTY (1 << 7)
#define L_PTE_BUFFERABLE (1 << 2) /* obsolete, matches PTE */
#define L_PTE_CACHEABLE (1 << 3) /* obsolete, matches PTE */
#define L_PTE_DIRTY (1 << 6)
#define L_PTE_WRITE (1 << 7)
#define L_PTE_USER (1 << 8)
#define L_PTE_EXEC (1 << 9)
#define L_PTE_SHARED (1 << 10) /* shared(v6), coherent(xsc3) */
/*
* These are the memory types, defined to be compatible with
* pre-ARMv6 CPUs cacheable and bufferable bits: XXCB
*/
#define L_PTE_MT_UNCACHED (0x00 << 2) /* 0000 */
#define L_PTE_MT_BUFFERABLE (0x01 << 2) /* 0001 */
#define L_PTE_MT_WRITETHROUGH (0x02 << 2) /* 0010 */
#define L_PTE_MT_WRITEBACK (0x03 << 2) /* 0011 */
#define L_PTE_MT_MINICACHE (0x06 << 2) /* 0110 (sa1100, xscale) */
#define L_PTE_MT_WRITEALLOC (0x07 << 2) /* 0111 */
#define L_PTE_MT_DEV_SHARED (0x04 << 2) /* 0100 */
#define L_PTE_MT_DEV_NONSHARED (0x0c << 2) /* 1100 */
#define L_PTE_MT_DEV_WC (0x09 << 2) /* 1001 */
#define L_PTE_MT_DEV_CACHED (0x0b << 2) /* 1011 */
#define L_PTE_MT_MASK (0x0f << 2)
#ifndef __ASSEMBLY__
/*
@ -180,23 +196,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
* as well as any architecture dependent bits like global/ASID and SMP
* shared mapping bits.
*/
#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC
#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG
extern pgprot_t pgprot_user;
extern pgprot_t pgprot_kernel;
#define PAGE_NONE pgprot_user
#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
L_PTE_WRITE)
#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
#define PAGE_KERNEL pgprot_kernel
#define _MOD_PROT(p, b) __pgprot(pgprot_val(p) | (b))
#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
#define PAGE_NONE pgprot_user
#define PAGE_SHARED _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE)
#define PAGE_SHARED_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
#define PAGE_COPY _MOD_PROT(pgprot_user, L_PTE_USER)
#define PAGE_COPY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
#define PAGE_READONLY _MOD_PROT(pgprot_user, L_PTE_USER)
#define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
#define PAGE_KERNEL pgprot_kernel
#define PAGE_KERNEL_EXEC _MOD_PROT(pgprot_kernel, L_PTE_EXEC)
#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE)
#define __PAGE_SHARED_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
#define __PAGE_COPY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | L_PTE_USER)
#define __PAGE_READONLY_EXEC __pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
#endif /* __ASSEMBLY__ */
@ -212,19 +235,19 @@ extern pgprot_t pgprot_kernel;
#define __P001 __PAGE_READONLY
#define __P010 __PAGE_COPY
#define __P011 __PAGE_COPY
#define __P100 __PAGE_READONLY
#define __P101 __PAGE_READONLY
#define __P110 __PAGE_COPY
#define __P111 __PAGE_COPY
#define __P100 __PAGE_READONLY_EXEC
#define __P101 __PAGE_READONLY_EXEC
#define __P110 __PAGE_COPY_EXEC
#define __P111 __PAGE_COPY_EXEC
#define __S000 __PAGE_NONE
#define __S001 __PAGE_READONLY
#define __S010 __PAGE_SHARED
#define __S011 __PAGE_SHARED
#define __S100 __PAGE_READONLY
#define __S101 __PAGE_READONLY
#define __S110 __PAGE_SHARED
#define __S111 __PAGE_SHARED
#define __S100 __PAGE_READONLY_EXEC
#define __S101 __PAGE_READONLY_EXEC
#define __S110 __PAGE_SHARED_EXEC
#define __S111 __PAGE_SHARED_EXEC
#ifndef __ASSEMBLY__
/*
@ -286,8 +309,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/*
* Mark the prot value as uncacheable and unbufferable.
*/
#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
#define pgprot_noncached(prot) \
__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
#define pgprot_writecombine(prot) \
__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
@ -319,11 +344,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
/*
* Permanent address of a page. We never have highmem, so this is trivial.
*/
#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.

7
arch/arm/include/asm/ptrace.h
Просмотреть файл

@ -54,7 +54,6 @@
#define PSR_C_BIT 0x20000000
#define PSR_Z_BIT 0x40000000
#define PSR_N_BIT 0x80000000
#define PCMASK 0
/*
* Groups of PSR bits
@ -139,11 +138,7 @@ static inline int valid_user_regs(struct pt_regs *regs)
return 0;
}
#define pc_pointer(v) \
((v) & ~PCMASK)
#define instruction_pointer(regs) \
(pc_pointer((regs)->ARM_pc))
#define instruction_pointer(regs) (regs)->ARM_pc
#ifdef CONFIG_SMP
extern unsigned long profile_pc(struct pt_regs *regs);

11
arch/arm/include/asm/setup.h
Просмотреть файл

@ -209,6 +209,17 @@ struct meminfo {
struct membank bank[NR_BANKS];
};
#define for_each_nodebank(iter,mi,no) \
for (iter = 0; iter < mi->nr_banks; iter++) \
if (mi->bank[iter].node == no)
#define bank_pfn_start(bank) __phys_to_pfn((bank)->start)
#define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size)
#define bank_pfn_size(bank) ((bank)->size >> PAGE_SHIFT)
#define bank_phys_start(bank) (bank)->start
#define bank_phys_end(bank) ((bank)->start + (bank)->size)
#define bank_phys_size(bank) (bank)->size
/*
* Early command line parameters.
*/

20
arch/arm/include/asm/sparsemem.h
Просмотреть файл

@ -3,8 +3,22 @@
#include <asm/memory.h>
#define MAX_PHYSADDR_BITS 32
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS
/*
* Two definitions are required for sparsemem:
*
* MAX_PHYSMEM_BITS: The number of physical address bits required
* to address the last byte of memory.
*
* SECTION_SIZE_BITS: The number of physical address bits to cover
* the maximum amount of memory in a section.
*
* Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
* then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
*
* Define these in your mach/memory.h.
*/
#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
#error Sparsemem is not supported on this platform
#endif
#endif

58
arch/arm/include/asm/system.h
Просмотреть файл

@ -43,11 +43,6 @@
#define CR_XP (1 << 23) /* Extended page tables */
#define CR_VE (1 << 24) /* Vectored interrupts */
#define CPUID_ID 0
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@ -61,36 +56,8 @@
#ifndef __ASSEMBLY__
#include <linux/linkage.h>
#include <linux/stringify.h>
#include <linux/irqflags.h>
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
unsigned int __val; \
asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
: "=r" (__val) \
: \
: "cc"); \
__val; \
})
#else
extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
#endif
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
* rather than directly reading processor_id or read_cpuid() directly.
*/
static inline unsigned int read_cpuid_id(void) __attribute_const__;
static inline unsigned int read_cpuid_id(void)
{
return read_cpuid(CPUID_ID);
}
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
@ -131,31 +98,6 @@ extern void cpu_init(void);
void arm_machine_restart(char mode);
extern void (*arm_pm_restart)(char str);
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
* this reason, we need a way to explicitly test for this type of CPU.
*/
#ifndef CONFIG_CPU_XSC3
#define cpu_is_xsc3() 0
#else
static inline int cpu_is_xsc3(void)
{
extern unsigned int processor_id;
if ((processor_id & 0xffffe000) == 0x69056000)
return 1;
return 0;
}
#endif
#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
#define cpu_is_xscale() 0
#else
#define cpu_is_xscale() 1
#endif
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
#define UDBG_BADABORT (1 << 2)

2
arch/arm/include/asm/thread_info.h
Просмотреть файл

@ -98,7 +98,7 @@ static inline struct thread_info *current_thread_info(void)
}
#define thread_saved_pc(tsk) \
((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
#define thread_saved_fp(tsk) \
((unsigned long)(task_thread_info(tsk)->cpu_context.fp))

10
arch/arm/include/asm/uaccess.h
Просмотреть файл

@ -225,7 +225,7 @@ do { \
#define __get_user_asm_byte(x,addr,err) \
__asm__ __volatile__( \
"1: ldrbt %1,[%2],#0\n" \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@ -261,7 +261,7 @@ do { \
#define __get_user_asm_word(x,addr,err) \
__asm__ __volatile__( \
"1: ldrt %1,[%2],#0\n" \
"1: ldrt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@ -306,7 +306,7 @@ do { \
#define __put_user_asm_byte(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strbt %1,[%2],#0\n" \
"1: strbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@ -339,7 +339,7 @@ do { \
#define __put_user_asm_word(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strt %1,[%2],#0\n" \
"1: strt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \
@ -365,7 +365,7 @@ do { \
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
"1: strt " __reg_oper1 ", [%1], #4\n" \
"2: strt " __reg_oper0 ", [%1], #0\n" \
"2: strt " __reg_oper0 ", [%1]\n" \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .align 2\n" \

2
arch/arm/include/asm/vga.h
Просмотреть файл

@ -1,8 +1,8 @@
#ifndef ASMARM_VGA_H
#define ASMARM_VGA_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/io.h>
#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x))

2
arch/arm/kernel/Makefile
Просмотреть файл

@ -10,7 +10,7 @@ endif
# Object file lists.
obj-y := compat.o entry-armv.o entry-common.o irq.o \
obj-y := compat.o elf.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o

4
arch/arm/kernel/armksyms.c
Просмотреть файл

@ -13,11 +13,11 @@
#include <linux/delay.h>
#include <linux/in6.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <asm/checksum.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/ftrace.h>
/*

2
arch/arm/kernel/bios32.c
Просмотреть файл

@ -10,8 +10,8 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>

2
arch/arm/kernel/crunch.c
Просмотреть файл

@ -15,9 +15,9 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/ep93xx-regs.h>
#include <asm/thread_notify.h>
#include <asm/io.h>
struct crunch_state *crunch_owner;

5
arch/arm/kernel/debug.S
Просмотреть файл

@ -89,10 +89,12 @@
ENTRY(printhex8)
mov r1, #8
b printhex
ENDPROC(printhex8)
ENTRY(printhex4)
mov r1, #4
b printhex
ENDPROC(printhex4)
ENTRY(printhex2)
mov r1, #2
@ -110,6 +112,7 @@ printhex: adr r2, hexbuf
bne 1b
mov r0, r2
b printascii
ENDPROC(printhex2)
.ltorg
@ -127,11 +130,13 @@ ENTRY(printascii)
teqne r1, #0
bne 1b
mov pc, lr
ENDPROC(printascii)
ENTRY(printch)
addruart r3
mov r1, r0
mov r0, #0
b 1b
ENDPROC(printch)
hexbuf: .space 16

3
arch/arm/kernel/dma-isa.c
Просмотреть файл

@ -19,10 +19,9 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/mach/dma.h>
#define ISA_DMA_MODE_READ 0x44

6
arch/arm/kernel/ecard.c
Просмотреть файл

@ -587,8 +587,7 @@ ecard_irq_handler(unsigned int irq, struct irq_desc *desc)
pending = ecard_default_ops.irqpending(ec);
if (pending) {
struct irq_desc *d = irq_desc + ec->irq;
desc_handle_irq(ec->irq, d);
generic_handle_irq(ec->irq);
called ++;
}
}
@ -622,7 +621,6 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
ecard_t *ec = slot_to_ecard(slot);
if (ec->claimed) {
struct irq_desc *d = irq_desc + ec->irq;
/*
* this ugly code is so that we can operate a
* prioritorising system:
@ -635,7 +633,7 @@ ecard_irqexp_handler(unsigned int irq, struct irq_desc *desc)
* Serial cards should go in 0/1, ethernet/scsi in 2/3
* otherwise you will lose serial data at high speeds!
*/
desc_handle_irq(ec->irq, d);
generic_handle_irq(ec->irq);
} else {
printk(KERN_WARNING "card%d: interrupt from unclaimed "
"card???\n", slot);

79
arch/arm/kernel/elf.c Normal file
Просмотреть файл

@ -0,0 +1,79 @@
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/elf.h>
int elf_check_arch(const struct elf32_hdr *x)
{
unsigned int eflags;
/* Make sure it's an ARM executable */
if (x->e_machine != EM_ARM)
return 0;
/* Make sure the entry address is reasonable */
if (x->e_entry & 1) {
if (!(elf_hwcap & HWCAP_THUMB))
return 0;
} else if (x->e_entry & 3)
return 0;
eflags = x->e_flags;
if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
/* APCS26 is only allowed if the CPU supports it */
if ((eflags & EF_ARM_APCS_26) && !(elf_hwcap & HWCAP_26BIT))
return 0;
/* VFP requires the supporting code */
if ((eflags & EF_ARM_VFP_FLOAT) && !(elf_hwcap & HWCAP_VFP))
return 0;
}
return 1;
}
EXPORT_SYMBOL(elf_check_arch);
void elf_set_personality(const struct elf32_hdr *x)
{
unsigned int eflags = x->e_flags;
unsigned int personality = PER_LINUX_32BIT;
/*
* APCS-26 is only valid for OABI executables
*/
if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
if (eflags & EF_ARM_APCS_26)
personality = PER_LINUX;
}
set_personality(personality);
/*
* Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
* and CP1, we only enable access to the iWMMXt coprocessor if the
* binary is EABI or softfloat (and thus, guaranteed not to use
* FPA instructions.)
*/
if (elf_hwcap & HWCAP_IWMMXT &&
eflags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) {
set_thread_flag(TIF_USING_IWMMXT);
} else {
clear_thread_flag(TIF_USING_IWMMXT);
}
}
EXPORT_SYMBOL(elf_set_personality);
/*
* Set READ_IMPLIES_EXEC if:
* - the binary requires an executable stack
* - we're running on a CPU which doesn't support NX.
*/
int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
{
if (executable_stack != EXSTACK_ENABLE_X)
return 1;
if (cpu_architecture() <= CPU_ARCH_ARMv6)
return 1;
return 0;
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);

16
arch/arm/kernel/entry-armv.S
Просмотреть файл

@ -76,14 +76,17 @@
__pabt_invalid:
inv_entry BAD_PREFETCH
b common_invalid
ENDPROC(__pabt_invalid)
__dabt_invalid:
inv_entry BAD_DATA
b common_invalid
ENDPROC(__dabt_invalid)
__irq_invalid:
inv_entry BAD_IRQ
b common_invalid
ENDPROC(__irq_invalid)
__und_invalid:
inv_entry BAD_UNDEFINSTR
@ -107,6 +110,7 @@ common_invalid:
mov r0, sp
b bad_mode
ENDPROC(__und_invalid)
/*
* SVC mode handlers
@ -192,6 +196,7 @@ __dabt_svc:
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
ENDPROC(__dabt_svc)
.align 5
__irq_svc:
@ -223,6 +228,7 @@ __irq_svc:
bleq trace_hardirqs_on
#endif
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
ENDPROC(__irq_svc)
.ltorg
@ -272,6 +278,7 @@ __und_svc:
ldr lr, [sp, #S_PSR] @ Get SVC cpsr
msr spsr_cxsf, lr
ldmia sp, {r0 - pc}^ @ Restore SVC registers
ENDPROC(__und_svc)
.align 5
__pabt_svc:
@ -313,6 +320,7 @@ __pabt_svc:
ldr r0, [sp, #S_PSR]
msr spsr_cxsf, r0
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
ENDPROC(__pabt_svc)
.align 5
.LCcralign:
@ -412,6 +420,7 @@ __dabt_usr:
mov r2, sp
adr lr, ret_from_exception
b do_DataAbort
ENDPROC(__dabt_usr)
.align 5
__irq_usr:
@ -441,6 +450,7 @@ __irq_usr:
mov why, #0
b ret_to_user
ENDPROC(__irq_usr)
.ltorg
@ -474,6 +484,7 @@ __und_usr:
#else
b __und_usr_unknown
#endif
ENDPROC(__und_usr)
@
@ fallthrough to call_fpe
@ -642,6 +653,7 @@ __und_usr_unknown:
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
ENDPROC(__und_usr_unknown)
.align 5
__pabt_usr:
@ -666,6 +678,8 @@ ENTRY(ret_from_exception)
get_thread_info tsk
mov why, #0
b ret_to_user
ENDPROC(__pabt_usr)
ENDPROC(ret_from_exception)
/*
* Register switch for ARMv3 and ARMv4 processors
@ -702,6 +716,7 @@ ENTRY(__switch_to)
bl atomic_notifier_call_chain
mov r0, r5
ldmia r4, {r4 - sl, fp, sp, pc} @ Load all regs saved previously
ENDPROC(__switch_to)
__INIT
@ -1029,6 +1044,7 @@ vector_\name:
mov r0, sp
ldr lr, [pc, lr, lsl #2]
movs pc, lr @ branch to handler in SVC mode
ENDPROC(vector_\name)
.endm
.globl __stubs_start

25
arch/arm/kernel/entry-common.S
Просмотреть файл

@ -77,6 +77,7 @@ no_work_pending:
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
ENDPROC(ret_to_user)
/*
* This is how we return from a fork.
@ -92,7 +93,7 @@ ENTRY(ret_from_fork)
mov r0, #1 @ trace exit [IP = 1]
bl syscall_trace
b ret_slow_syscall
ENDPROC(ret_from_fork)
.equ NR_syscalls,0
#define CALL(x) .equ NR_syscalls,NR_syscalls+1
@ -269,6 +270,7 @@ ENTRY(vector_swi)
eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
bcs arm_syscall
b sys_ni_syscall @ not private func
ENDPROC(vector_swi)
/*
* This is the really slow path. We're going to be doing
@ -326,7 +328,6 @@ ENTRY(sys_call_table)
*/
@ r0 = syscall number
@ r8 = syscall table
.type sys_syscall, #function
sys_syscall:
bic scno, r0, #__NR_OABI_SYSCALL_BASE
cmp scno, #__NR_syscall - __NR_SYSCALL_BASE
@ -338,53 +339,65 @@ sys_syscall:
movlo r3, r4
ldrlo pc, [tbl, scno, lsl #2]
b sys_ni_syscall
ENDPROC(sys_syscall)
sys_fork_wrapper:
add r0, sp, #S_OFF
b sys_fork
ENDPROC(sys_fork_wrapper)
sys_vfork_wrapper:
add r0, sp, #S_OFF
b sys_vfork
ENDPROC(sys_vfork_wrapper)
sys_execve_wrapper:
add r3, sp, #S_OFF
b sys_execve
ENDPROC(sys_execve_wrapper)
sys_clone_wrapper:
add ip, sp, #S_OFF
str ip, [sp, #4]
b sys_clone
ENDPROC(sys_clone_wrapper)
sys_sigsuspend_wrapper:
add r3, sp, #S_OFF
b sys_sigsuspend
ENDPROC(sys_sigsuspend_wrapper)
sys_rt_sigsuspend_wrapper:
add r2, sp, #S_OFF
b sys_rt_sigsuspend
ENDPROC(sys_rt_sigsuspend_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
sys_sigaltstack_wrapper:
ldr r2, [sp, #S_OFF + S_SP]
b do_sigaltstack
ENDPROC(sys_sigaltstack_wrapper)
sys_statfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_statfs64
ENDPROC(sys_statfs64_wrapper)
sys_fstatfs64_wrapper:
teq r1, #88
moveq r1, #84
b sys_fstatfs64
ENDPROC(sys_fstatfs64_wrapper)
/*
* Note: off_4k (r5) is always units of 4K. If we can't do the requested
@ -402,11 +415,14 @@ sys_mmap2:
str r5, [sp, #4]
b do_mmap2
#endif
ENDPROC(sys_mmap2)
ENTRY(pabort_ifar)
mrc p15, 0, r0, cr6, cr0, 2
ENTRY(pabort_noifar)
mov pc, lr
ENDPROC(pabort_ifar)
ENDPROC(pabort_noifar)
#ifdef CONFIG_OABI_COMPAT
@ -417,26 +433,31 @@ ENTRY(pabort_noifar)
sys_oabi_pread64:
stmia sp, {r3, r4}
b sys_pread64
ENDPROC(sys_oabi_pread64)
sys_oabi_pwrite64:
stmia sp, {r3, r4}
b sys_pwrite64
ENDPROC(sys_oabi_pwrite64)
sys_oabi_truncate64:
mov r3, r2
mov r2, r1
b sys_truncate64
ENDPROC(sys_oabi_truncate64)
sys_oabi_ftruncate64:
mov r3, r2
mov r2, r1
b sys_ftruncate64
ENDPROC(sys_oabi_ftruncate64)
sys_oabi_readahead:
str r3, [sp]
mov r3, r2
mov r2, r1
b sys_readahead
ENDPROC(sys_oabi_readahead)
/*
* Let's declare a second syscall table for old ABI binaries

1
arch/arm/kernel/fiq.c
Просмотреть файл

@ -45,7 +45,6 @@
#include <asm/fiq.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/uaccess.h>
static unsigned long no_fiq_insn;

19
arch/arm/kernel/head-common.S
Просмотреть файл

@ -36,7 +36,6 @@ __switch_data:
* r2 = atags pointer
* r9 = processor ID
*/
.type __mmap_switched, %function
__mmap_switched:
adr r3, __switch_data + 4
@ -59,6 +58,7 @@ __mmap_switched:
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r7, {r0, r4} @ Save control register values
b start_kernel
ENDPROC(__mmap_switched)
/*
* Exception handling. Something went wrong and we can't proceed. We
@ -69,8 +69,6 @@ __mmap_switched:
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
.type __error_p, %function
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
@ -84,8 +82,8 @@ str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
str_p2: .asciz ").\n"
.align
#endif
ENDPROC(__error_p)
.type __error_a, %function
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
@ -115,13 +113,14 @@ __error_a:
adr r0, str_a3
bl printascii
b __error
ENDPROC(__error_a)
str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
.type __error, %function
__error:
#ifdef CONFIG_ARCH_RPC
/*
@ -138,6 +137,7 @@ __error:
#endif
1: mov r0, r0
b 1b
ENDPROC(__error)
/*
@ -153,7 +153,6 @@ __error:
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
.type __lookup_processor_type, %function
__lookup_processor_type:
adr r3, 3f
ldmda r3, {r5 - r7}
@ -169,6 +168,7 @@ __lookup_processor_type:
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
ENDPROC(__lookup_processor_type)
/*
* This provides a C-API version of the above function.
@ -179,6 +179,7 @@ ENTRY(lookup_processor_type)
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
ENDPROC(lookup_processor_type)
/*
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
@ -201,7 +202,6 @@ ENTRY(lookup_processor_type)
* r3, r4, r6 corrupted
* r5 = mach_info pointer in physical address space
*/
.type __lookup_machine_type, %function
__lookup_machine_type:
adr r3, 3b
ldmia r3, {r4, r5, r6}
@ -216,6 +216,7 @@ __lookup_machine_type:
blo 1b
mov r5, #0 @ unknown machine
2: mov pc, lr
ENDPROC(__lookup_machine_type)
/*
* This provides a C-API version of the above function.
@ -226,6 +227,7 @@ ENTRY(lookup_machine_type)
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
ENDPROC(lookup_machine_type)
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
@ -239,8 +241,6 @@ ENTRY(lookup_machine_type)
* r2 either valid atags pointer, or zero
* r5, r6 corrupted
*/
.type __vet_atags, %function
__vet_atags:
tst r2, #0x3 @ aligned?
bne 1f
@ -257,3 +257,4 @@ __vet_atags:
1: mov r2, #0
mov pc, lr
ENDPROC(__vet_atags)

4
arch/arm/kernel/head-nommu.S
Просмотреть файл

@ -33,7 +33,6 @@
*
*/
.section ".text.head", "ax"
.type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@ -53,11 +52,11 @@ ENTRY(stext)
@ the initialization is done
adr lr, __after_proc_init @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
ENDPROC(stext)
/*
* Set the Control Register and Read the process ID.
*/
.type __after_proc_init, %function
__after_proc_init:
#ifdef CONFIG_CPU_CP15
mrc p15, 0, r0, c1, c0, 0 @ read control reg
@ -85,6 +84,7 @@ __after_proc_init:
mov pc, r13 @ clear the BSS and jump
@ to start_kernel
ENDPROC(__after_proc_init)
.ltorg
#include "head-common.S"

12
arch/arm/kernel/head.S
Просмотреть файл

@ -75,7 +75,6 @@
* circumstances, zImage) is for.
*/
.section ".text.head", "ax"
.type stext, %function
ENTRY(stext)
msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
@ and irqs disabled
@ -100,9 +99,9 @@ ENTRY(stext)
@ mmu has been enabled
adr lr, __enable_mmu @ return (PIC) address
add pc, r10, #PROCINFO_INITFUNC
ENDPROC(stext)
#if defined(CONFIG_SMP)
.type secondary_startup, #function
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
@ -128,6 +127,7 @@ ENTRY(secondary_startup)
adr lr, __enable_mmu @ return address
add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
ENDPROC(secondary_startup)
/*
* r6 = &secondary_data
@ -136,6 +136,7 @@ ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
@ -151,7 +152,6 @@ __secondary_data:
* this is just loading the page table pointer and domain access
* registers.
*/
.type __enable_mmu, %function
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
@ -174,6 +174,7 @@ __enable_mmu:
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
ENDPROC(__enable_mmu)
/*
* Enable the MMU. This completely changes the structure of the visible
@ -187,7 +188,6 @@ __enable_mmu:
* other registers depend on the function called upon completion
*/
.align 5
.type __turn_mmu_on, %function
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
@ -195,7 +195,7 @@ __turn_mmu_on:
mov r3, r3
mov r3, r3
mov pc, r13
ENDPROC(__turn_mmu_on)
/*
@ -211,7 +211,6 @@ __turn_mmu_on:
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
*/
.type __create_page_tables, %function
__create_page_tables:
pgtbl r4 @ page table address
@ -325,6 +324,7 @@ __create_page_tables:
#endif
#endif
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
#include "head-common.S"

2
arch/arm/kernel/init_task.c
Просмотреть файл

@ -8,8 +8,8 @@
#include <linux/init.h>
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <linux/uaccess.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;

3
arch/arm/kernel/io.c
Просмотреть файл

@ -1,7 +1,6 @@
#include <linux/module.h>
#include <linux/types.h>
#include <asm/io.h>
#include <linux/io.h>
/*
* Copy data from IO memory space to "real" memory space.

11
arch/arm/kernel/irq.c
Просмотреть файл

@ -112,18 +112,17 @@ static struct irq_desc bad_irq_desc = {
asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
struct irq_desc *desc = irq_desc + irq;
irq_enter();
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (irq >= NR_IRQS)
desc = &bad_irq_desc;
irq_enter();
desc_handle_irq(irq, desc);
handle_bad_irq(irq, &bad_irq_desc);
else
generic_handle_irq(irq);
/* AT91 specific workaround */
irq_finish(irq);

4
arch/arm/kernel/kprobes-decode.c
Просмотреть файл

@ -488,7 +488,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
if (!ubit)
addr -= reg_count;
addr += (!pbit ^ !ubit);
addr += (!pbit == !ubit);
reg_bit_vector = insn & 0xffff;
while (reg_bit_vector) {
@ -503,7 +503,7 @@ static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
if (wbit) {
if (!ubit)
addr -= reg_count;
addr -= (!pbit ^ !ubit);
addr -= (!pbit == !ubit);
regs->uregs[rn] = (long)addr;
}
}

5
arch/arm/kernel/kprobes.c
Просмотреть файл

@ -200,9 +200,12 @@ void __kprobes kprobe_handler(struct pt_regs *regs)
}
}
int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
static int __kprobes kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
{
unsigned long flags;
local_irq_save(flags);
kprobe_handler(regs);
local_irq_restore(flags);
return 0;
}

2
arch/arm/kernel/machine_kexec.c
Просмотреть файл

@ -6,10 +6,10 @@
#include <linux/kexec.h>
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/io.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>

2
arch/arm/kernel/module.c
Просмотреть файл

@ -47,7 +47,7 @@ void *module_alloc(unsigned long size)
if (!area)
return NULL;
return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL);
return __vmalloc_area(area, GFP_KERNEL, PAGE_KERNEL_EXEC);
}
#else /* CONFIG_MMU */
void *module_alloc(unsigned long size)

33
arch/arm/kernel/process.c
Просмотреть файл

@ -28,12 +28,12 @@
#include <linux/pm.h>
#include <linux/tick.h>
#include <linux/utsname.h>
#include <linux/uaccess.h>
#include <asm/leds.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/thread_notify.h>
#include <asm/uaccess.h>
#include <asm/mach/time.h>
static const char *processor_modes[] = {
@ -267,35 +267,6 @@ void show_regs(struct pt_regs * regs)
__backtrace();
}
void show_fpregs(struct user_fp *regs)
{
int i;
for (i = 0; i < 8; i++) {
unsigned long *p;
char type;
p = (unsigned long *)(regs->fpregs + i);
switch (regs->ftype[i]) {
case 1: type = 'f'; break;
case 2: type = 'd'; break;
case 3: type = 'e'; break;
default: type = '?'; break;
}
if (regs->init_flag)
type = '?';
printk(" f%d(%c): %08lx %08lx %08lx%c",
i, type, p[0], p[1], p[2], i & 1 ? '\n' : ' ');
}
printk("FPSR: %08lx FPCR: %08lx\n",
(unsigned long)regs->fpsr,
(unsigned long)regs->fpcr);
}
/*
* Free current thread data structures etc..
*/
@ -414,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p)
do {
if (fp < stack_start || fp > stack_end)
return 0;
lr = pc_pointer (((unsigned long *)fp)[-1]);
lr = ((unsigned long *)fp)[-1];
if (!in_sched_functions(lr))
return lr;
fp = *(unsigned long *) (fp - 12);

10
arch/arm/kernel/ptrace.c
Просмотреть файл

@ -18,8 +18,8 @@
#include <linux/security.h>
#include <linux/init.h>
#include <linux/signal.h>
#include <linux/uaccess.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/traps.h>
@ -126,7 +126,7 @@ ptrace_getrn(struct task_struct *child, unsigned long insn)
val = get_user_reg(child, reg);
if (reg == 15)
val = pc_pointer(val + 8);
val += 8;
return val;
}
@ -278,8 +278,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
else
base -= aluop2;
}
if (read_u32(child, base, &alt) == 0)
alt = pc_pointer(alt);
read_u32(child, base, &alt);
}
break;
@ -305,8 +304,7 @@ get_branch_address(struct task_struct *child, unsigned long pc, unsigned long in
base = ptrace_getrn(child, insn);
if (read_u32(child, base + nr_regs, &alt) == 0)
alt = pc_pointer(alt);
read_u32(child, base + nr_regs, &alt);
break;
}
break;

279
arch/arm/kernel/setup.c
Просмотреть файл

@ -26,11 +26,13 @@
#include <linux/fs.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/elf.h>
#include <asm/procinfo.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/tlbflush.h>
#include <asm/mach/arch.h>
@ -59,13 +61,14 @@ __setup("fpe=", fpe_setup);
extern void paging_init(struct meminfo *, struct machine_desc *desc);
extern void reboot_setup(char *str);
extern int root_mountflags;
extern void _stext, _text, _etext, __data_start, _edata, _end;
extern void _text, _etext, __data_start, _edata, _end;
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
unsigned int __machine_arch_type;
EXPORT_SYMBOL(__machine_arch_type);
unsigned int cacheid;
EXPORT_SYMBOL(cacheid);
unsigned int __atags_pointer __initdata;
@ -81,8 +84,6 @@ EXPORT_SYMBOL(system_serial_high);
unsigned int elf_hwcap;
EXPORT_SYMBOL(elf_hwcap);
unsigned long __initdata vmalloc_reserve = 128 << 20;
#ifdef MULTI_CPU
struct processor processor;
@ -111,9 +112,6 @@ static struct stack stacks[NR_CPUS];
char elf_platform[ELF_PLATFORM_SIZE];
EXPORT_SYMBOL(elf_platform);
unsigned long phys_initrd_start __initdata = 0;
unsigned long phys_initrd_size __initdata = 0;
static struct meminfo meminfo __initdata = { 0, };
static const char *cpu_name;
static const char *machine_name;
@ -178,63 +176,6 @@ static struct resource io_res[] = {
#define lp1 io_res[1]
#define lp2 io_res[2]
static const char *cache_types[16] = {
"write-through",
"write-back",
"write-back",
"undefined 3",
"undefined 4",
"undefined 5",
"write-back",
"write-back",
"undefined 8",
"undefined 9",
"undefined 10",
"undefined 11",
"undefined 12",
"undefined 13",
"write-back",
"undefined 15",
};
static const char *cache_clean[16] = {
"not required",
"read-block",
"cp15 c7 ops",
"undefined 3",
"undefined 4",
"undefined 5",
"cp15 c7 ops",
"cp15 c7 ops",
"undefined 8",
"undefined 9",
"undefined 10",
"undefined 11",
"undefined 12",
"undefined 13",
"cp15 c7 ops",
"undefined 15",
};
static const char *cache_lockdown[16] = {
"not supported",
"not supported",
"not supported",
"undefined 3",
"undefined 4",
"undefined 5",
"format A",
"format B",
"undefined 8",
"undefined 9",
"undefined 10",
"undefined 11",
"undefined 12",
"undefined 13",
"format C",
"undefined 15",
};
static const char *proc_arch[] = {
"undefined/unknown",
"3",
@ -255,61 +196,19 @@ static const char *proc_arch[] = {
"?(17)",
};
#define CACHE_TYPE(x) (((x) >> 25) & 15)
#define CACHE_S(x) ((x) & (1 << 24))
#define CACHE_DSIZE(x) (((x) >> 12) & 4095) /* only if S=1 */
#define CACHE_ISIZE(x) ((x) & 4095)
#define CACHE_SIZE(y) (((y) >> 6) & 7)
#define CACHE_ASSOC(y) (((y) >> 3) & 7)
#define CACHE_M(y) ((y) & (1 << 2))
#define CACHE_LINE(y) ((y) & 3)
static inline void dump_cache(const char *prefix, int cpu, unsigned int cache)
{
unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
printk("CPU%u: %s: %d bytes, associativity %d, %d byte lines, %d sets\n",
cpu, prefix,
mult << (8 + CACHE_SIZE(cache)),
(mult << CACHE_ASSOC(cache)) >> 1,
8 << CACHE_LINE(cache),
1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
CACHE_LINE(cache)));
}
static void __init dump_cpu_info(int cpu)
{
unsigned int info = read_cpuid(CPUID_CACHETYPE);
if (info != processor_id) {
printk("CPU%u: D %s %s cache\n", cpu, cache_is_vivt() ? "VIVT" : "VIPT",
cache_types[CACHE_TYPE(info)]);
if (CACHE_S(info)) {
dump_cache("I cache", cpu, CACHE_ISIZE(info));
dump_cache("D cache", cpu, CACHE_DSIZE(info));
} else {
dump_cache("cache", cpu, CACHE_ISIZE(info));
}
}
if (arch_is_coherent())
printk("Cache coherency enabled\n");
}
int cpu_architecture(void)
{
int cpu_arch;
if ((processor_id & 0x0008f000) == 0) {
if ((read_cpuid_id() & 0x0008f000) == 0) {
cpu_arch = CPU_ARCH_UNKNOWN;
} else if ((processor_id & 0x0008f000) == 0x00007000) {
cpu_arch = (processor_id & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
} else if ((processor_id & 0x00080000) == 0x00000000) {
cpu_arch = (processor_id >> 16) & 7;
} else if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
cpu_arch = (read_cpuid_id() & (1 << 23)) ? CPU_ARCH_ARMv4T : CPU_ARCH_ARMv3;
} else if ((read_cpuid_id() & 0x00080000) == 0x00000000) {
cpu_arch = (read_cpuid_id() >> 16) & 7;
if (cpu_arch)
cpu_arch += CPU_ARCH_ARMv3;
} else if ((processor_id & 0x000f0000) == 0x000f0000) {
} else if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
unsigned int mmfr0;
/* Revised CPUID format. Read the Memory Model Feature
@ -330,6 +229,34 @@ int cpu_architecture(void)
return cpu_arch;
}
static void __init cacheid_init(void)
{
unsigned int cachetype = read_cpuid_cachetype();
unsigned int arch = cpu_architecture();
if (arch >= CPU_ARCH_ARMv7) {
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (arch >= CPU_ARCH_ARMv6) {
if (cachetype & (1 << 23))
cacheid = CACHEID_VIPT_ALIASING;
else
cacheid = CACHEID_VIPT_NONALIASING;
} else {
cacheid = CACHEID_VIVT;
}
printk("CPU: %s data cache, %s instruction cache\n",
cache_is_vivt() ? "VIVT" :
cache_is_vipt_aliasing() ? "VIPT aliasing" :
cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
cache_is_vivt() ? "VIVT" :
icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
cache_is_vipt_aliasing() ? "VIPT aliasing" :
cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
}
/*
* These functions re-use the assembly code in head.S, which
* already provide the required functionality.
@ -346,10 +273,10 @@ static void __init setup_processor(void)
* types. The linker builds this table for us from the
* entries in arch/arm/mm/proc-*.S
*/
list = lookup_processor_type(processor_id);
list = lookup_processor_type(read_cpuid_id());
if (!list) {
printk("CPU configuration botched (ID %08x), unable "
"to continue.\n", processor_id);
"to continue.\n", read_cpuid_id());
while (1);
}
@ -369,7 +296,7 @@ static void __init setup_processor(void)
#endif
printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
cpu_name, processor_id, (int)processor_id & 15,
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
@ -379,14 +306,14 @@ static void __init setup_processor(void)
elf_hwcap &= ~HWCAP_THUMB;
#endif
cacheid_init();
cpu_proc_init();
}
/*
* cpu_init - initialise one CPU.
*
* cpu_init dumps the cache information, initialises SMP specific
* information, and sets up the per-CPU stacks.
* cpu_init sets up the per-CPU stacks.
*/
void cpu_init(void)
{
@ -398,9 +325,6 @@ void cpu_init(void)
BUG();
}
if (system_state == SYSTEM_BOOTING)
dump_cpu_info(cpu);
/*
* setup stacks for re-entrant exception handlers
*/
@ -443,20 +367,6 @@ static struct machine_desc * __init setup_machine(unsigned int nr)
return list;
}
static void __init early_initrd(char **p)
{
unsigned long start, size;
start = memparse(*p, p);
if (**p == ',') {
size = memparse((*p) + 1, p);
phys_initrd_start = start;
phys_initrd_size = size;
}
}
__early_param("initrd=", early_initrd);
static void __init arm_add_memory(unsigned long start, unsigned long size)
{
struct membank *bank;
@ -502,17 +412,6 @@ static void __init early_mem(char **p)
}
__early_param("mem=", early_mem);
/*
* vmalloc=size forces the vmalloc area to be exactly 'size'
* bytes. This can be used to increase (or decrease) the vmalloc
* area - the default is 128m.
*/
static void __init early_vmalloc(char **arg)
{
vmalloc_reserve = memparse(*arg, arg);
}
__early_param("vmalloc=", early_vmalloc);
/*
* Initial parsing of the command line.
*/
@ -527,12 +426,12 @@ static void __init parse_cmdline(char **cmdline_p, char *from)
struct early_params *p;
for (p = &__early_begin; p < &__early_end; p++) {
int len = strlen(p->arg);
int arglen = strlen(p->arg);
if (memcmp(from, p->arg, len) == 0) {
if (memcmp(from, p->arg, arglen) == 0) {
if (to != command_line)
to -= 1;
from += len;
from += arglen;
p->fn(&from);
while (*from != ' ' && *from != '\0')
@ -579,18 +478,13 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
kernel_data.end = virt_to_phys(&_end - 1);
for (i = 0; i < mi->nr_banks; i++) {
unsigned long virt_start, virt_end;
if (mi->bank[i].size == 0)
continue;
virt_start = __phys_to_virt(mi->bank[i].start);
virt_end = virt_start + mi->bank[i].size - 1;
res = alloc_bootmem_low(sizeof(*res));
res->name = "System RAM";
res->start = __virt_to_phys(virt_start);
res->end = __virt_to_phys(virt_end);
res->start = mi->bank[i].start;
res->end = mi->bank[i].start + mi->bank[i].size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
request_resource(&iomem_resource, res);
@ -694,26 +588,6 @@ static int __init parse_tag_ramdisk(const struct tag *tag)
__tagtable(ATAG_RAMDISK, parse_tag_ramdisk);
static int __init parse_tag_initrd(const struct tag *tag)
{
printk(KERN_WARNING "ATAG_INITRD is deprecated; "
"please update your bootloader.\n");
phys_initrd_start = __virt_to_phys(tag->u.initrd.start);
phys_initrd_size = tag->u.initrd.size;
return 0;
}
__tagtable(ATAG_INITRD, parse_tag_initrd);
static int __init parse_tag_initrd2(const struct tag *tag)
{
phys_initrd_start = tag->u.initrd.start;
phys_initrd_size = tag->u.initrd.size;
return 0;
}
__tagtable(ATAG_INITRD2, parse_tag_initrd2);
static int __init parse_tag_serialnr(const struct tag *tag)
{
system_serial_low = tag->u.serialnr.low;
@ -901,28 +775,12 @@ static const char *hwcap_str[] = {
NULL
};
static void
c_show_cache(struct seq_file *m, const char *type, unsigned int cache)
{
unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
seq_printf(m, "%s size\t\t: %d\n"
"%s assoc\t\t: %d\n"
"%s line length\t: %d\n"
"%s sets\t\t: %d\n",
type, mult << (8 + CACHE_SIZE(cache)),
type, (mult << CACHE_ASSOC(cache)) >> 1,
type, 8 << CACHE_LINE(cache),
type, 1 << (6 + CACHE_SIZE(cache) - CACHE_ASSOC(cache) -
CACHE_LINE(cache)));
}
static int c_show(struct seq_file *m, void *v)
{
int i;
seq_printf(m, "Processor\t: %s rev %d (%s)\n",
cpu_name, (int)processor_id & 15, elf_platform);
cpu_name, read_cpuid_id() & 15, elf_platform);
#if defined(CONFIG_SMP)
for_each_online_cpu(i) {
@ -949,47 +807,26 @@ static int c_show(struct seq_file *m, void *v)
if (elf_hwcap & (1 << i))
seq_printf(m, "%s ", hwcap_str[i]);
seq_printf(m, "\nCPU implementer\t: 0x%02x\n", processor_id >> 24);
seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
seq_printf(m, "CPU architecture: %s\n", proc_arch[cpu_architecture()]);
if ((processor_id & 0x0008f000) == 0x00000000) {
if ((read_cpuid_id() & 0x0008f000) == 0x00000000) {
/* pre-ARM7 */
seq_printf(m, "CPU part\t: %07x\n", processor_id >> 4);
seq_printf(m, "CPU part\t: %07x\n", read_cpuid_id() >> 4);
} else {
if ((processor_id & 0x0008f000) == 0x00007000) {
if ((read_cpuid_id() & 0x0008f000) == 0x00007000) {
/* ARM7 */
seq_printf(m, "CPU variant\t: 0x%02x\n",
(processor_id >> 16) & 127);
(read_cpuid_id() >> 16) & 127);
} else {
/* post-ARM7 */
seq_printf(m, "CPU variant\t: 0x%x\n",
(processor_id >> 20) & 15);
(read_cpuid_id() >> 20) & 15);
}
seq_printf(m, "CPU part\t: 0x%03x\n",
(processor_id >> 4) & 0xfff);
}
seq_printf(m, "CPU revision\t: %d\n", processor_id & 15);
{
unsigned int cache_info = read_cpuid(CPUID_CACHETYPE);
if (cache_info != processor_id) {
seq_printf(m, "Cache type\t: %s\n"
"Cache clean\t: %s\n"
"Cache lockdown\t: %s\n"
"Cache format\t: %s\n",
cache_types[CACHE_TYPE(cache_info)],
cache_clean[CACHE_TYPE(cache_info)],
cache_lockdown[CACHE_TYPE(cache_info)],
CACHE_S(cache_info) ? "Harvard" : "Unified");
if (CACHE_S(cache_info)) {
c_show_cache(m, "I", CACHE_ISIZE(cache_info));
c_show_cache(m, "D", CACHE_DSIZE(cache_info));
} else {
c_show_cache(m, "Cache", CACHE_ISIZE(cache_info));
}
}
(read_cpuid_id() >> 4) & 0xfff);
}
seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
seq_puts(m, "\n");

2
arch/arm/kernel/signal.c
Просмотреть файл

@ -11,11 +11,11 @@
#include <linux/signal.h>
#include <linux/personality.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <asm/elf.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include "ptrace.h"

3
arch/arm/kernel/sys_arm.c
Просмотреть файл

@ -27,8 +27,7 @@
#include <linux/file.h>
#include <linux/utsname.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
unsigned long new_len, unsigned long flags,

2
arch/arm/kernel/sys_oabi-compat.c
Просмотреть файл

@ -82,7 +82,7 @@
#include <linux/socket.h>
#include <linux/net.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
struct oldabi_stat64 {
unsigned long long st_dev;

2
arch/arm/kernel/time.c
Просмотреть файл

@ -59,7 +59,7 @@ unsigned long profile_pc(struct pt_regs *regs)
if (in_lock_functions(pc)) {
fp = regs->ARM_fp;
pc = pc_pointer(((unsigned long *)fp)[-1]);
pc = ((unsigned long *)fp)[-1];
}
return pc;

18
arch/arm/kernel/traps.c
Просмотреть файл

@ -19,15 +19,13 @@
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/traps.h>
#include <asm/io.h>
#include "ptrace.h"
#include "signal.h"
@ -69,7 +67,8 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
*/
static int verify_stack(unsigned long sp)
{
if (sp < PAGE_OFFSET || (sp > (unsigned long)high_memory && high_memory != 0))
if (sp < PAGE_OFFSET ||
(sp > (unsigned long)high_memory && high_memory != NULL))
return -EFAULT;
return 0;
@ -328,17 +327,6 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
get_user(instr, (u32 __user *)pc);
}
#ifdef CONFIG_KPROBES
/*
* It is possible to have recursive kprobes, so we can't call
* the kprobe trap handler with the undef_lock held.
*/
if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
kprobe_trap_handler(regs, instr);
return;
}
#endif
if (call_undef_hook(regs, instr) == 0)
return;

2
arch/arm/kernel/xscale-cp0.c
Просмотреть файл

@ -14,8 +14,8 @@
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/thread_notify.h>
#include <asm/io.h>
static inline void dsp_save_state(u32 *state)
{

2
arch/arm/lib/ashldi3.S
Просмотреть файл

@ -47,3 +47,5 @@ ENTRY(__aeabi_llsl)
mov al, al, lsl r2
mov pc, lr
ENDPROC(__ashldi3)
ENDPROC(__aeabi_llsl)

2
arch/arm/lib/ashrdi3.S
Просмотреть файл

@ -47,3 +47,5 @@ ENTRY(__aeabi_lasr)
mov ah, ah, asr r2
mov pc, lr
ENDPROC(__ashrdi3)
ENDPROC(__aeabi_lasr)

4
arch/arm/lib/backtrace.S
Просмотреть файл

@ -30,6 +30,8 @@ ENTRY(c_backtrace)
#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
mov pc, lr
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
#else
stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location...
movs frame, r0 @ if frame pointer is zero
@ -103,6 +105,8 @@ for_each_frame: tst frame, mask @ Check for address exceptions
mov r1, frame
bl printk
no_frame: ldmfd sp!, {r4 - r8, pc}
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
.section __ex_table,"a"
.align 3

2
arch/arm/lib/changebit.S
Просмотреть файл

@ -19,3 +19,5 @@ ENTRY(_change_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_change_bit_le)
bitop eor
ENDPROC(_change_bit_be)
ENDPROC(_change_bit_le)

3
arch/arm/lib/clear_user.S
Просмотреть файл

@ -41,9 +41,10 @@ USER( strplt r2, [r0], #4)
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
ENDPROC(__clear_user)
.section .fixup,"ax"
.align 0

2
arch/arm/lib/clearbit.S
Просмотреть файл

@ -20,3 +20,5 @@ ENTRY(_clear_bit_be)
eor r0, r0, #0x18 @ big endian byte ordering
ENTRY(_clear_bit_le)
bitop bic
ENDPROC(_clear_bit_be)
ENDPROC(_clear_bit_le)

2
arch/arm/lib/copy_from_user.S
Просмотреть файл

@ -87,6 +87,8 @@ ENTRY(__copy_from_user)
#include "copy_template.S"
ENDPROC(__copy_from_user)
.section .fixup,"ax"
.align 0
copy_abort_preamble

1
arch/arm/lib/copy_page.S
Просмотреть файл

@ -44,3 +44,4 @@ ENTRY(copy_page)
PLD( ldmeqia r1!, {r3, r4, ip, lr} )
PLD( beq 2b )
ldmfd sp!, {r4, pc} @ 3
ENDPROC(copy_page)

2
arch/arm/lib/copy_to_user.S
Просмотреть файл

@ -90,6 +90,8 @@ ENTRY(__copy_to_user)
#include "copy_template.S"
ENDPROC(__copy_to_user)
.section .fixup,"ax"
.align 0
copy_abort_preamble

1
arch/arm/lib/csumipv6.S
Просмотреть файл

@ -29,4 +29,5 @@ ENTRY(__csum_ipv6_magic)
adcs r0, r0, r2
adcs r0, r0, #0
ldmfd sp!, {pc}
ENDPROC(__csum_ipv6_magic)

1
arch/arm/lib/csumpartial.S
Просмотреть файл

@ -139,3 +139,4 @@ ENTRY(csum_partial)
tst len, #0x1c
bne 4b
b .Lless4
ENDPROC(csum_partial)

7
arch/arm/lib/csumpartialcopy.S
Просмотреть файл

@ -18,13 +18,11 @@
*/
.macro save_regs
mov ip, sp
stmfd sp!, {r1, r4 - r8, fp, ip, lr, pc}
sub fp, ip, #4
stmfd sp!, {r1, r4 - r8, lr}
.endm
.macro load_regs
ldmfd sp, {r1, r4 - r8, fp, sp, pc}
ldmfd sp!, {r1, r4 - r8, pc}
.endm
.macro load1b, reg1
@ -50,5 +48,6 @@
.endm
#define FN_ENTRY ENTRY(csum_partial_copy_nocheck)
#define FN_EXIT ENDPROC(csum_partial_copy_nocheck)
#include "csumpartialcopygeneric.S"

1
arch/arm/lib/csumpartialcopygeneric.S
Просмотреть файл

@ -329,3 +329,4 @@ FN_ENTRY
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
b .Lexit
FN_EXIT

7
arch/arm/lib/csumpartialcopyuser.S
Просмотреть файл

@ -18,13 +18,11 @@
.text
.macro save_regs
mov ip, sp
stmfd sp!, {r1 - r2, r4 - r8, fp, ip, lr, pc}
sub fp, ip, #4
stmfd sp!, {r1, r2, r4 - r8, lr}
.endm
.macro load_regs
ldmfd sp, {r1, r2, r4-r8, fp, sp, pc}
ldmfd sp!, {r1, r2, r4 - r8, pc}
.endm
.macro load1b, reg1
@ -82,6 +80,7 @@
*/
#define FN_ENTRY ENTRY(csum_partial_copy_from_user)
#define FN_EXIT ENDPROC(csum_partial_copy_from_user)
#include "csumpartialcopygeneric.S"

3
arch/arm/lib/delay.S
Просмотреть файл

@ -60,3 +60,6 @@ ENTRY(__delay)
#endif
bhi __delay
mov pc, lr
ENDPROC(__udelay)
ENDPROC(__const_udelay)
ENDPROC(__delay)

1
arch/arm/lib/div64.S
Просмотреть файл

@ -198,3 +198,4 @@ ENTRY(__do_div64)
mov xh, #0
ldr pc, [sp], #8
ENDPROC(__do_div64)

8
arch/arm/lib/findbit.S
Просмотреть файл

@ -33,6 +33,7 @@ ENTRY(_find_first_zero_bit_le)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
ENDPROC(_find_first_zero_bit_le)
/*
* Purpose : Find next 'zero' bit
@ -50,6 +51,7 @@ ENTRY(_find_next_zero_bit_le)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_zero_bit_le)
/*
* Purpose : Find a 'one' bit
@ -67,6 +69,7 @@ ENTRY(_find_first_bit_le)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
ENDPROC(_find_first_bit_le)
/*
* Purpose : Find next 'one' bit
@ -83,6 +86,7 @@ ENTRY(_find_next_bit_le)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_bit_le)
#ifdef __ARMEB__
@ -99,6 +103,7 @@ ENTRY(_find_first_zero_bit_be)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
ENDPROC(_find_first_zero_bit_be)
ENTRY(_find_next_zero_bit_be)
teq r1, #0
@ -113,6 +118,7 @@ ENTRY(_find_next_zero_bit_be)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_zero_bit_be)
ENTRY(_find_first_bit_be)
teq r1, #0
@ -127,6 +133,7 @@ ENTRY(_find_first_bit_be)
blo 1b
3: mov r0, r1 @ no free bits
mov pc, lr
ENDPROC(_find_first_bit_be)
ENTRY(_find_next_bit_be)
teq r1, #0
@ -140,6 +147,7 @@ ENTRY(_find_next_bit_be)
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
ENDPROC(_find_next_bit_be)
#endif

14
arch/arm/lib/getuser.S
Просмотреть файл

@ -26,16 +26,16 @@
* Note that ADDR_LIMIT is either 0 or 0xc0000000.
* Note also that it is intended that __get_user_bad is not global.
*/
#include <linux/linkage.h>
#include <asm/errno.h>
.global __get_user_1
__get_user_1:
ENTRY(__get_user_1)
1: ldrbt r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
.global __get_user_2
__get_user_2:
ENTRY(__get_user_2)
2: ldrbt r2, [r0], #1
3: ldrbt r3, [r0]
#ifndef __ARMEB__
@ -45,17 +45,19 @@ __get_user_2:
#endif
mov r0, #0
mov pc, lr
ENDPROC(__get_user_2)
.global __get_user_4
__get_user_4:
ENTRY(__get_user_4)
4: ldrt r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_4)
__get_user_bad:
mov r2, #0
mov r0, #-EFAULT
mov pc, lr
ENDPROC(__get_user_bad)
.section __ex_table, "a"
.long 1b, __get_user_bad

1
arch/arm/lib/io-readsb.S
Просмотреть файл

@ -120,3 +120,4 @@ ENTRY(__raw_readsb)
strgtb r3, [r1]
ldmfd sp!, {r4 - r6, pc}
ENDPROC(__raw_readsb)

1
arch/arm/lib/io-readsl.S
Просмотреть файл

@ -76,3 +76,4 @@ ENTRY(__raw_readsl)
8: mov r3, ip, get_byte_0
strb r3, [r1, #0]
mov pc, lr
ENDPROC(__raw_readsl)

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше