regulator: ab8500: Added get_optimum_mode on regulators with idle mode
With this change, Vtvout, Vintcore12, Vaux1, 2 and 3 regulators support DRMS (Dynamic Regulator Mode Switching) which will dynamically handle requests for max current consumption from several consumers and select a suitable regulator mode. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Bengt Jonsson
Mark Brown
Родитель
bd28a15733
Коммит
7ce4669c8f
|
|
@ -31,6 +31,7 @@
|
|||
* @desc: regulator description
|
||||
* @regulator_dev: regulator device
|
||||
* @is_enabled: status of regulator (on/off)
|
||||
* @load_lp_uA: maximum load in idle (low power) mode
|
||||
* @update_bank: bank to control on/off
|
||||
* @update_reg: register to control on/off
|
||||
* @update_mask: mask to enable/disable and set mode of regulator
|
||||
|
|
@ -48,6 +49,7 @@ struct ab8500_regulator_info {
|
|||
struct regulator_desc desc;
|
||||
struct regulator_dev *regulator;
|
||||
bool is_enabled;
|
||||
int load_lp_uA;
|
||||
u8 update_bank;
|
||||
u8 update_reg;
|
||||
u8 update_mask;
|
||||
|
|
@ -156,6 +158,27 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
static unsigned int ab8500_regulator_get_optimum_mode(
|
||||
struct regulator_dev *rdev, int input_uV,
|
||||
int output_uV, int load_uA)
|
||||
{
|
||||
unsigned int mode;
|
||||
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
|
||||
if (info == NULL) {
|
||||
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (load_uA <= info->load_lp_uA)
|
||||
mode = REGULATOR_MODE_IDLE;
|
||||
else
|
||||
mode = REGULATOR_MODE_NORMAL;
|
||||
|
||||
return mode;
|
||||
}
|
||||
|
||||
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
|
||||
unsigned int mode)
|
||||
{
|
||||
|
|
@ -186,6 +209,12 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
|
|||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set regulator mode\n");
|
||||
|
||||
dev_vdbg(rdev_get_dev(rdev),
|
||||
"%s-set_mode (bank, reg, mask, value): "
|
||||
"0x%x, 0x%x, 0x%x, 0x%x\n",
|
||||
info->desc.name, info->update_bank, info->update_reg,
|
||||
info->update_mask, info->update_val);
|
||||
}
|
||||
|
||||
return ret;
|
||||
|
|
@ -313,23 +342,37 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
|
|||
return info->delay;
|
||||
}
|
||||
|
||||
static struct regulator_ops ab8500_regulator_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.set_mode = ab8500_regulator_set_mode,
|
||||
.get_mode = ab8500_regulator_get_mode,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
||||
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
|
||||
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
|
||||
.set_mode = ab8500_regulator_set_mode,
|
||||
.get_mode = ab8500_regulator_get_mode,
|
||||
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
||||
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
|
||||
};
|
||||
|
||||
static struct regulator_ops ab8500_regulator_fixed_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
static struct regulator_ops ab8500_regulator_mode_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_optimum_mode = ab8500_regulator_get_optimum_mode,
|
||||
.set_mode = ab8500_regulator_set_mode,
|
||||
.get_mode = ab8500_regulator_get_mode,
|
||||
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
|
||||
};
|
||||
|
||||
static struct regulator_ops ab8500_regulator_ops = {
|
||||
.enable = ab8500_regulator_enable,
|
||||
.disable = ab8500_regulator_disable,
|
||||
.is_enabled = ab8500_regulator_is_enabled,
|
||||
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
};
|
||||
|
||||
static struct ab8500_regulator_info
|
||||
|
|
@ -343,13 +386,14 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_AUX1] = {
|
||||
.desc = {
|
||||
.name = "LDO-AUX1",
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.ops = &ab8500_regulator_volt_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_AUX1,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
||||
.volt_table = ldo_vauxn_voltages,
|
||||
},
|
||||
.load_lp_uA = 5000,
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x09,
|
||||
.update_mask = 0x03,
|
||||
|
|
@ -363,13 +407,14 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_AUX2] = {
|
||||
.desc = {
|
||||
.name = "LDO-AUX2",
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.ops = &ab8500_regulator_volt_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_AUX2,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
|
||||
.volt_table = ldo_vauxn_voltages,
|
||||
},
|
||||
.load_lp_uA = 5000,
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x09,
|
||||
.update_mask = 0x0c,
|
||||
|
|
@ -383,13 +428,14 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_AUX3] = {
|
||||
.desc = {
|
||||
.name = "LDO-AUX3",
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.ops = &ab8500_regulator_volt_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_AUX3,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
|
||||
.volt_table = ldo_vaux3_voltages,
|
||||
},
|
||||
.load_lp_uA = 5000,
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x0a,
|
||||
.update_mask = 0x03,
|
||||
|
|
@ -403,13 +449,14 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_INTCORE] = {
|
||||
.desc = {
|
||||
.name = "LDO-INTCORE",
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.ops = &ab8500_regulator_volt_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_INTCORE,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
|
||||
.volt_table = ldo_vintcore_voltages,
|
||||
},
|
||||
.load_lp_uA = 5000,
|
||||
.update_bank = 0x03,
|
||||
.update_reg = 0x80,
|
||||
.update_mask = 0x44,
|
||||
|
|
@ -430,7 +477,7 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_TVOUT] = {
|
||||
.desc = {
|
||||
.name = "LDO-TVOUT",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_TVOUT,
|
||||
.owner = THIS_MODULE,
|
||||
|
|
@ -439,10 +486,13 @@ static struct ab8500_regulator_info
|
|||
.enable_time = 10000,
|
||||
},
|
||||
.delay = 10000,
|
||||
.load_lp_uA = 1000,
|
||||
.update_bank = 0x03,
|
||||
.update_reg = 0x80,
|
||||
.update_mask = 0x82,
|
||||
.update_val = 0x02,
|
||||
.update_val_idle = 0x82,
|
||||
.update_val_normal = 0x02,
|
||||
},
|
||||
[AB8500_LDO_USB] = {
|
||||
.desc = {
|
||||
|
|
@ -458,10 +508,14 @@ static struct ab8500_regulator_info
|
|||
.update_reg = 0x82,
|
||||
.update_mask = 0x03,
|
||||
},
|
||||
|
||||
/*
|
||||
* Regulators with fixed voltage and normal mode
|
||||
*/
|
||||
[AB8500_LDO_AUDIO] = {
|
||||
.desc = {
|
||||
.name = "LDO-AUDIO",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_AUDIO,
|
||||
.owner = THIS_MODULE,
|
||||
|
|
@ -476,7 +530,7 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_ANAMIC1] = {
|
||||
.desc = {
|
||||
.name = "LDO-ANAMIC1",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_ANAMIC1,
|
||||
.owner = THIS_MODULE,
|
||||
|
|
@ -491,7 +545,7 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_ANAMIC2] = {
|
||||
.desc = {
|
||||
.name = "LDO-ANAMIC2",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_ANAMIC2,
|
||||
.owner = THIS_MODULE,
|
||||
|
|
@ -506,7 +560,7 @@ static struct ab8500_regulator_info
|
|||
[AB8500_LDO_DMIC] = {
|
||||
.desc = {
|
||||
.name = "LDO-DMIC",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_DMIC,
|
||||
.owner = THIS_MODULE,
|
||||
|
|
@ -518,20 +572,27 @@ static struct ab8500_regulator_info
|
|||
.update_mask = 0x04,
|
||||
.update_val = 0x04,
|
||||
},
|
||||
|
||||
/*
|
||||
* Regulators with fixed voltage and normal/idle modes
|
||||
*/
|
||||
[AB8500_LDO_ANA] = {
|
||||
.desc = {
|
||||
.name = "LDO-ANA",
|
||||
.ops = &ab8500_regulator_fixed_ops,
|
||||
.ops = &ab8500_regulator_mode_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.id = AB8500_LDO_ANA,
|
||||
.owner = THIS_MODULE,
|
||||
.n_voltages = 1,
|
||||
.min_uV = 1200000,
|
||||
},
|
||||
.load_lp_uA = 1000,
|
||||
.update_bank = 0x04,
|
||||
.update_reg = 0x06,
|
||||
.update_mask = 0x0c,
|
||||
.update_val = 0x04,
|
||||
.update_val_idle = 0x0c,
|
||||
.update_val_normal = 0x04,
|
||||
},
|
||||
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче