microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla1280: retain firmware for error recovery
  [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
  [SCSI] advansys: fix regression with request_firmware change
  [SCSI] qla2xxx: Updated version number to 8.03.02-k2.
  [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
  [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.
  [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.
  [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.
  [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.
  [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline
  [SCSI] libiscsi: Fix recovery slowdown regression
This commit is contained in:
Linus Torvalds 2010-04-05 15:37:12 -07:00
Родитель 749d229761 421e33d004
Коммит 7da23b86e1
11 изменённых файлов: 172 добавлений и 84 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

1
drivers/base/attribute_container.c
Просмотреть файл

@ -328,6 +328,7 @@ attribute_container_add_attrs(struct device *classdev)
return sysfs_create_group(&classdev->kobj, cont->grp);
for (i = 0; attrs[i]; i++) {
sysfs_attr_init(&attrs[i]->attr);
error = device_create_file(classdev, attrs[i]);
if (error)
return error;

8
drivers/scsi/advansys.c
Просмотреть файл

@ -4781,12 +4781,14 @@ static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@ -5110,12 +5112,14 @@ static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@ -5624,12 +5628,14 @@ static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
@ -6124,12 +6130,14 @@ static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |

5
drivers/scsi/libiscsi.c
Просмотреть файл

@ -3088,14 +3088,15 @@ static void iscsi_start_session_recovery(struct iscsi_session *session,
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
spin_unlock_bh(&session->lock);
del_timer_sync(&conn->transport_timer);
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
spin_unlock_bh(&session->lock);

161
drivers/scsi/qla1280.c
Просмотреть файл

@ -17,9 +17,11 @@
* General Public License for more details.
*
******************************************************************************/
#define QLA1280_VERSION "3.27"
#define QLA1280_VERSION "3.27.1"
/*****************************************************************************
Revision History:
Rev 3.27.1, February 8, 2010, Michael Reed
- Retain firmware image for error recovery.
Rev 3.27, February 10, 2009, Michael Reed
- General code cleanup.
- Improve error recovery.
@ -537,9 +539,9 @@ __setup("qla1280=", qla1280_setup);
/*****************************************/
struct qla_boards {
unsigned char name[9]; /* Board ID String */
char *name; /* Board ID String */
int numPorts; /* Number of SCSI ports */
char *fwname; /* firmware name */
int fw_index; /* index into qla1280_fw_tbl for firmware */
};
/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
@ -560,15 +562,30 @@ static struct pci_device_id qla1280_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
DEFINE_MUTEX(qla1280_firmware_mutex);
struct qla_fw {
char *fwname;
const struct firmware *fw;
};
#define QL_NUM_FW_IMAGES 3
struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
{"qlogic/1040.bin", NULL}, /* image 0 */
{"qlogic/1280.bin", NULL}, /* image 1 */
{"qlogic/12160.bin", NULL}, /* image 2 */
};
/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
static struct qla_boards ql1280_board_tbl[] = {
/* Name , Number of ports, FW details */
{"QLA12160", 2, "qlogic/12160.bin"},
{"QLA1040", 1, "qlogic/1040.bin"},
{"QLA1080", 1, "qlogic/1280.bin"},
{"QLA1240", 2, "qlogic/1280.bin"},
{"QLA1280", 2, "qlogic/1280.bin"},
{"QLA10160", 1, "qlogic/12160.bin"},
{" ", 0, " "},
{.name = "QLA12160", .numPorts = 2, .fw_index = 2},
{.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
{.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
{.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
{.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
{.name = "QLA10160", .numPorts = 1, .fw_index = 2},
{.name = " ", .numPorts = 0, .fw_index = -1},
};
static int qla1280_verbose = 1;
@ -1510,6 +1527,63 @@ qla1280_initialize_adapter(struct scsi_qla_host *ha)
return status;
}
/*
* qla1280_request_firmware
* Acquire firmware for chip. Retain in memory
* for error recovery.
*
* Input:
* ha = adapter block pointer.
*
* Returns:
* Pointer to firmware image or an error code
* cast to pointer via ERR_PTR().
*/
static const struct firmware *
qla1280_request_firmware(struct scsi_qla_host *ha)
{
const struct firmware *fw;
int err;
int index;
char *fwname;
spin_unlock_irq(ha->host->host_lock);
mutex_lock(&qla1280_firmware_mutex);
index = ql1280_board_tbl[ha->devnum].fw_index;
fw = qla1280_fw_tbl[index].fw;
if (fw)
goto out;
fwname = qla1280_fw_tbl[index].fwname;
err = request_firmware(&fw, fwname, &ha->pdev->dev);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
fw = ERR_PTR(err);
goto unlock;
}
if ((fw->size % 2) || (fw->size < 6)) {
printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
fw = ERR_PTR(-EINVAL);
goto unlock;
}
qla1280_fw_tbl[index].fw = fw;
out:
ha->fwver1 = fw->data[0];
ha->fwver2 = fw->data[1];
ha->fwver3 = fw->data[2];
unlock:
mutex_unlock(&qla1280_firmware_mutex);
spin_lock_irq(ha->host->host_lock);
return fw;
}
/*
* Chip diagnostics
* Test chip for proper operation.
@ -1633,30 +1707,18 @@ qla1280_chip_diag(struct scsi_qla_host *ha)
static int
qla1280_load_firmware_pio(struct scsi_qla_host *ha)
{
/* enter with host_lock acquired */
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
int err;
int err = 0;
fw = qla1280_request_firmware(ha);
if (IS_ERR(fw))
return PTR_ERR(fw);
spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
return err;
}
if ((fw->size % 2) || (fw->size < 6)) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, ql1280_board_tbl[ha->devnum].fwname);
err = -EINVAL;
goto out;
}
ha->fwver1 = fw->data[0];
ha->fwver2 = fw->data[1];
ha->fwver3 = fw->data[2];
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
@ -1674,11 +1736,10 @@ qla1280_load_firmware_pio(struct scsi_qla_host *ha)
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
ha->host_no);
goto out;
break;
}
}
out:
release_firmware(fw);
return err;
}
@ -1686,6 +1747,7 @@ out:
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
{
/* enter with host_lock acquired */
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
@ -1700,24 +1762,10 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
return -ENOMEM;
#endif
spin_unlock_irq(ha->host->host_lock);
err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
&ha->pdev->dev);
spin_lock_irq(ha->host->host_lock);
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
ql1280_board_tbl[ha->devnum].fwname, err);
return err;
}
if ((fw->size % 2) || (fw->size < 6)) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, ql1280_board_tbl[ha->devnum].fwname);
err = -EINVAL;
goto out;
}
ha->fwver1 = fw->data[0];
ha->fwver2 = fw->data[1];
ha->fwver3 = fw->data[2];
fw = qla1280_request_firmware(ha);
if (IS_ERR(fw))
return PTR_ERR(fw);
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
@ -1802,7 +1850,6 @@ qla1280_load_firmware_dma(struct scsi_qla_host *ha)
#if DUMP_IT_BACK
pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
#endif
release_firmware(fw);
return err;
}
@ -1841,6 +1888,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha)
static int
qla1280_load_firmware(struct scsi_qla_host *ha)
{
/* enter with host_lock taken */
int err;
err = qla1280_chip_diag(ha);
@ -4419,7 +4467,16 @@ qla1280_init(void)
static void __exit
qla1280_exit(void)
{
int i;
pci_unregister_driver(&qla1280_pci_driver);
/* release any allocated firmware images */
for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
if (qla1280_fw_tbl[i].fw) {
release_firmware(qla1280_fw_tbl[i].fw);
qla1280_fw_tbl[i].fw = NULL;
}
}
}
module_init(qla1280_init);

6
drivers/scsi/qla2xxx/qla_attr.c
Просмотреть файл

@ -1275,7 +1275,11 @@ qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
if (!vha->hw->flags.eeh_busy)
if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
__func__, vha->host_no));
else if (!vha->hw->flags.eeh_busy)
rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));

18
drivers/scsi/qla2xxx/qla_fw.h
Просмотреть файл

@ -1592,10 +1592,22 @@ struct nvram_81xx {
/* Offset 384. */
uint8_t reserved_21[16];
uint16_t reserved_22[8];
uint16_t reserved_22[3];
/*
* BIT 0 = Extended BB credits for LR
* BIT 1 = Virtual Fabric Enable
* BIT 2 = Enhanced Features Unused
* BIT 3-7 = Enhanced Features Reserved
*/
/* Enhanced Features */
uint8_t enhanced_features;
uint8_t reserved_23;
uint16_t reserved_24[4];
/* Offset 416. */
uint16_t reserved_23[32];
uint16_t reserved_25[32];
/* Offset 480. */
uint8_t model_name[16];
@ -1603,7 +1615,7 @@ struct nvram_81xx {
/* Offset 496. */
uint16_t feature_mask_l;
uint16_t feature_mask_h;
uint16_t reserved_24[2];
uint16_t reserved_26[2];
uint16_t subsystem_vendor_id;
uint16_t subsystem_device_id;

37
drivers/scsi/qla2xxx/qla_isr.c
Просмотреть файл

@ -621,11 +621,10 @@ skip_rio:
* vp_idx does not match
* Event is not global, vp_idx does not match
*/
if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff)
|| (mb[1] != 0xffff)) {
if (vha->vp_idx != (mb[3] & 0xff))
break;
}
if (IS_QLA2XXX_MIDTYPE(ha) &&
((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
(mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
break;
/* Global event -- port logout or port unavailable. */
if (mb[1] == 0xffff && mb[2] == 0x7) {
@ -2273,30 +2272,28 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp)
/* If possible, enable MSI-X. */
if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
!IS_QLA8432(ha) && !IS_QLA8001(ha))
goto skip_msix;
!IS_QLA8432(ha) && !IS_QLA8001(ha))
goto skip_msi;
if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
(ha->pdev->subsystem_device == 0x7040 ||
ha->pdev->subsystem_device == 0x7041 ||
ha->pdev->subsystem_device == 0x1705)) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n",
ha->pdev->subsystem_vendor,
ha->pdev->subsystem_device));
goto skip_msi;
}
if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
ha->pdev->revision, ha->fw_attributes));
goto skip_msix;
}
if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
(ha->pdev->subsystem_device == 0x7040 ||
ha->pdev->subsystem_device == 0x7041 ||
ha->pdev->subsystem_device == 0x1705)) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
ha->pdev->subsystem_vendor,
ha->pdev->subsystem_device));
goto skip_msi;
}
ret = qla24xx_enable_msix(ha, rsp);
if (!ret) {
DEBUG2(qla_printk(KERN_INFO, ha,

8
drivers/scsi/qla2xxx/qla_mbx.c
Просмотреть файл

@ -340,6 +340,7 @@ qla2x00_load_ram(scsi_qla_host_t *vha, dma_addr_t req_dma, uint32_t risc_addr,
return rval;
}
#define EXTENDED_BB_CREDITS BIT_0
/*
* qla2x00_execute_fw
* Start adapter firmware.
@ -372,7 +373,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
mcp->mb[1] = MSW(risc_addr);
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
mcp->mb[4] = 0;
if (IS_QLA81XX(ha)) {
struct nvram_81xx *nv = ha->nvram;
mcp->mb[4] = (nv->enhanced_features &
EXTENDED_BB_CREDITS);
} else
mcp->mb[4] = 0;
mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
mcp->in_mb |= MBX_1;
} else {

4
drivers/scsi/qla2xxx/qla_os.c
Просмотреть файл

@ -1677,9 +1677,11 @@ skip_pio:
/* Determine queue resources */
ha->max_req_queues = ha->max_rsp_queues = 1;
if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) ||
(ql2xmaxqueues > 1 && ql2xmultique_tag) ||
(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
if (ha->mqiobase) {

4
drivers/scsi/qla2xxx/qla_version.h
Просмотреть файл

@ -7,9 +7,9 @@
/*
* Driver version
*/
#define QLA2XXX_VERSION "8.03.02-k1"
#define QLA2XXX_VERSION "8.03.02-k2"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#define QLA_DRIVER_PATCH_VER 2
#define QLA_DRIVER_BETA_VER 1
#define QLA_DRIVER_BETA_VER 2

4
drivers/scsi/scsi_transport_fc.c
Просмотреть файл

@ -3853,7 +3853,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
if (rport && (rport->port_state != FC_PORTSTATE_ONLINE)) {
req->errors = -ENXIO;
spin_unlock_irq(q->queue_lock);
blk_end_request(req, -ENXIO, blk_rq_bytes(req));
blk_end_request_all(req, -ENXIO);
spin_lock_irq(q->queue_lock);
continue;
}
@ -3863,7 +3863,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost,
ret = fc_req_to_bsgjob(shost, rport, req);
if (ret) {
req->errors = ret;
blk_end_request(req, ret, blk_rq_bytes(req));
blk_end_request_all(req, ret);
spin_lock_irq(q->queue_lock);
continue;
}